diff options
| author | Peter Maydell <peter.maydell@linaro.org> | 2019-02-21 18:17:47 +0000 |
|---|---|---|
| committer | Peter Maydell <peter.maydell@linaro.org> | 2019-02-21 18:17:47 +0000 |
| commit | 321874196d0fff06eff1df43b20cbadcfe699aad (patch) | |
| tree | 8eeee175c09a1a95216ef5c41989cca2aee4dd05 /hw/arm | |
| parent | 74ecf7677b72084b25ace9de3191abe3afdaeff6 (diff) | |
hw/arm/armsse: Allow boards to specify init-svtor
The Musca boards have DAPLink firmware that sets the initial
secure VTOR value (the location of the vector table) differently
depending on the boot mode (from flash, from RAM, etc). Export
the init-svtor as a QOM property of the ARMSSE object so that
the board can change it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Diffstat (limited to 'hw/arm')
| -rw-r--r-- | hw/arm/armsse.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index d0207dbabc..50da41f64c 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -505,11 +505,10 @@ static void armsse_realize(DeviceState *dev, Error **errp) * the INITSVTOR* registers before powering up the CPUs in any case, * so the hardware's default value doesn't matter. QEMU doesn't emulate * the control processor, so instead we behave in the way that the - * firmware does. All boards currently known about have firmware that - * sets the INITSVTOR0 and INITSVTOR1 registers to 0x10000000, like the - * IoTKit default. We can make this more configurable if necessary. + * firmware does. The initial value is configurable by the board code + * to match whatever its firmware does. */ - qdev_prop_set_uint32(cpudev, "init-svtor", 0x10000000); + qdev_prop_set_uint32(cpudev, "init-svtor", s->init_svtor); /* * Start all CPUs except CPU0 powered down. In real hardware it is * a configurable property of the SSE-200 which CPUs start powered up @@ -1187,6 +1186,7 @@ static Property armsse_properties[] = { DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), + DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_END_OF_LIST() }; |