hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 182 deletions

diff --git a/hw/alpha_dp264.c b/hw/alpha_dp264.c
deleted file mode 100644
index 13aaa57b90..0000000000
--- a/hw/alpha_dp264.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * QEMU Alpha DP264/CLIPPER hardware system emulator.
- *
- * Choose CLIPPER IRQ mappings over, say, DP264, MONET, or WEBBRICK
- * variants because CLIPPER doesn't have an SMC669 SuperIO controller
- * that we need to emulate as well.
- */
-
-#include "hw/hw.h"
-#include "elf.h"
-#include "hw/loader.h"
-#include "hw/boards.h"
-#include "hw/alpha_sys.h"
-#include "sysemu/sysemu.h"
-#include "hw/mc146818rtc.h"
-#include "hw/ide.h"
-#include "hw/i8254.h"
-#include "hw/serial.h"
-
-#define MAX_IDE_BUS 2
-
-static uint64_t cpu_alpha_superpage_to_phys(void *opaque, uint64_t addr)
-{
-    if (((addr >> 41) & 3) == 2) {
-        addr &= 0xffffffffffull;
-    }
-    return addr;
-}
-
-/* Note that there are at least 3 viewpoints of IRQ numbers on Alpha systems.
-    (0) The dev_irq_n lines into the cpu, which we totally ignore,
-    (1) The DRIR lines in the typhoon chipset,
-    (2) The "vector" aka mangled interrupt number reported by SRM PALcode,
-    (3) The interrupt number assigned by the kernel.
-   The following function is concerned with (1) only.  */
-
-static int clipper_pci_map_irq(PCIDevice *d, int irq_num)
-{
-    int slot = d->devfn >> 3;
-
-    assert(irq_num >= 0 && irq_num <= 3);
-
-    return (slot + 1) * 4 + irq_num;
-}
-
-static void clipper_init(QEMUMachineInitArgs *args)
-{
-    ram_addr_t ram_size = args->ram_size;
-    const char *cpu_model = args->cpu_model;
-    const char *kernel_filename = args->kernel_filename;
-    const char *kernel_cmdline = args->kernel_cmdline;
-    const char *initrd_filename = args->initrd_filename;
-    AlphaCPU *cpus[4];
-    PCIBus *pci_bus;
-    ISABus *isa_bus;
-    qemu_irq rtc_irq;
-    long size, i;
-    const char *palcode_filename;
-    uint64_t palcode_entry, palcode_low, palcode_high;
-    uint64_t kernel_entry, kernel_low, kernel_high;
-
-    /* Create up to 4 cpus.  */
-    memset(cpus, 0, sizeof(cpus));
-    for (i = 0; i < smp_cpus; ++i) {
-        cpus[i] = cpu_alpha_init(cpu_model ? cpu_model : "ev67");
-    }
-
-    cpus[0]->env.trap_arg0 = ram_size;
-    cpus[0]->env.trap_arg1 = 0;
-    cpus[0]->env.trap_arg2 = smp_cpus;
-
-    /* Init the chipset.  */
-    pci_bus = typhoon_init(ram_size, &isa_bus, &rtc_irq, cpus,
-                           clipper_pci_map_irq);
-
-    rtc_init(isa_bus, 1980, rtc_irq);
-    pit_init(isa_bus, 0x40, 0, NULL);
-    isa_create_simple(isa_bus, "i8042");
-
-    /* VGA setup.  Don't bother loading the bios.  */
-    pci_vga_init(pci_bus);
-
-    /* Serial code setup.  */
-    for (i = 0; i < MAX_SERIAL_PORTS; ++i) {
-        if (serial_hds[i]) {
-            serial_isa_init(isa_bus, i, serial_hds[i]);
-        }
-    }
-
-    /* Network setup.  e1000 is good enough, failing Tulip support.  */
-    for (i = 0; i < nb_nics; i++) {
-        pci_nic_init_nofail(&nd_table[i], "e1000", NULL);
-    }
-
-    /* IDE disk setup.  */
-    {
-        DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
-        ide_drive_get(hd, MAX_IDE_BUS);
-
-        pci_cmd646_ide_init(pci_bus, hd, 0);
-    }
-
-    /* Load PALcode.  Given that this is not "real" cpu palcode,
-       but one explicitly written for the emulation, we might as
-       well load it directly from and ELF image.  */
-    palcode_filename = (bios_name ? bios_name : "palcode-clipper");
-    palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, palcode_filename);
-    if (palcode_filename == NULL) {
-        hw_error("no palcode provided\n");
-        exit(1);
-    }
-    size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys,
-                    NULL, &palcode_entry, &palcode_low, &palcode_high,
-                    0, EM_ALPHA, 0);
-    if (size < 0) {
-        hw_error("could not load palcode '%s'\n", palcode_filename);
-        exit(1);
-    }
-
-    /* Start all cpus at the PALcode RESET entry point.  */
-    for (i = 0; i < smp_cpus; ++i) {
-        cpus[i]->env.pal_mode = 1;
-        cpus[i]->env.pc = palcode_entry;
-        cpus[i]->env.palbr = palcode_entry;
-    }
-
-    /* Load a kernel.  */
-    if (kernel_filename) {
-        uint64_t param_offset;
-
-        size = load_elf(kernel_filename, cpu_alpha_superpage_to_phys,
-                        NULL, &kernel_entry, &kernel_low, &kernel_high,
-                        0, EM_ALPHA, 0);
-        if (size < 0) {
-            hw_error("could not load kernel '%s'\n", kernel_filename);
-            exit(1);
-        }
-
-        cpus[0]->env.trap_arg1 = kernel_entry;
-
-        param_offset = kernel_low - 0x6000;
-
-        if (kernel_cmdline) {
-            pstrcpy_targphys("cmdline", param_offset, 0x100, kernel_cmdline);
-        }
-
-        if (initrd_filename) {
-            long initrd_base, initrd_size;
-
-            initrd_size = get_image_size(initrd_filename);
-            if (initrd_size < 0) {
-                hw_error("could not load initial ram disk '%s'\n",
-                         initrd_filename);
-                exit(1);
-            }
-
-            /* Put the initrd image as high in memory as possible.  */
-            initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
-            load_image_targphys(initrd_filename, initrd_base,
-                                ram_size - initrd_base);
-
-            stq_phys(param_offset + 0x100, initrd_base + 0xfffffc0000000000ULL);
-            stq_phys(param_offset + 0x108, initrd_size);
-        }
-    }
-}
-
-static QEMUMachine clipper_machine = {
-    .name = "clipper",
-    .desc = "Alpha DP264/CLIPPER",
-    .init = clipper_init,
-    .max_cpus = 4,
-    .is_default = 1,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static void clipper_machine_init(void)
-{
-    qemu_register_machine(&clipper_machine);
-}
-
-machine_init(clipper_machine_init);