bitmaps.md: Convert to rST; move it into 'interop' dir

This is part of the on-going effort to convert QEMU upstream
documentation syntax to reStructuredText (rST).

The conversion to rST was done using:

    $ pandoc -f markdown -t rst bitmaps.md -o bitmaps.rst

Then, make a couple of small syntactical adjustments.  While at it,
reword a statement to avoid ambiguity.  Addressing the feedback from
this thread:

    https://lists.nongnu.org/archive/html/qemu-devel/2017-06/msg05428.html

Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170717105205.32639-2-kchamart@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>

2 files changed, 555 insertions, 505 deletions

diff --git a/docs/devel/bitmaps.md b/docs/devel/bitmaps.md
deleted file mode 100644
index a2e8d51163..0000000000
--- a/docs/devel/bitmaps.md
+++ /dev/null
@@ -1,505 +0,0 @@
-<!--
-Copyright 2015 John Snow <jsnow@redhat.com> and Red Hat, Inc.
-All rights reserved.
-
-This file is licensed via The FreeBSD Documentation License, the full text of
-which is included at the end of this document.
--->
-
-# Dirty Bitmaps and Incremental Backup
-
-* Dirty Bitmaps are objects that track which data needs to be backed up for the
-  next incremental backup.
-
-* Dirty bitmaps can be created at any time and attached to any node
-  (not just complete drives.)
-
-## Dirty Bitmap Names
-
-* A dirty bitmap's name is unique to the node, but bitmaps attached to different
-  nodes can share the same name.
-
-* Dirty bitmaps created for internal use by QEMU may be anonymous and have no
-  name, but any user-created bitmaps may not be. There can be any number of
-  anonymous bitmaps per node.
-
-* The name of a user-created bitmap must not be empty ("").
-
-## Bitmap Modes
-
-* A Bitmap can be "frozen," which means that it is currently in-use by a backup
-  operation and cannot be deleted, renamed, written to, reset,
-  etc.
-
-* The normal operating mode for a bitmap is "active."
-
-## Basic QMP Usage
-
-### Supported Commands ###
-
-* block-dirty-bitmap-add
-* block-dirty-bitmap-remove
-* block-dirty-bitmap-clear
-
-### Creation
-
-* To create a new bitmap, enabled, on the drive with id=drive0:
-
-```json
-{ "execute": "block-dirty-bitmap-add",
-  "arguments": {
-    "node": "drive0",
-    "name": "bitmap0"
-  }
-}
-```
-
-* This bitmap will have a default granularity that matches the cluster size of
-  its associated drive, if available, clamped to between [4KiB, 64KiB].
-  The current default for qcow2 is 64KiB.
-
-* To create a new bitmap that tracks changes in 32KiB segments:
-
-```json
-{ "execute": "block-dirty-bitmap-add",
-  "arguments": {
-    "node": "drive0",
-    "name": "bitmap0",
-    "granularity": 32768
-  }
-}
-```
-
-### Deletion
-
-* Bitmaps that are frozen cannot be deleted.
-
-* Deleting the bitmap does not impact any other bitmaps attached to the same
-  node, nor does it affect any backups already created from this node.
-
-* Because bitmaps are only unique to the node to which they are attached,
-  you must specify the node/drive name here, too.
-
-```json
-{ "execute": "block-dirty-bitmap-remove",
-  "arguments": {
-    "node": "drive0",
-    "name": "bitmap0"
-  }
-}
-```
-
-### Resetting
-
-* Resetting a bitmap will clear all information it holds.
-
-* An incremental backup created from an empty bitmap will copy no data,
-  as if nothing has changed.
-
-```json
-{ "execute": "block-dirty-bitmap-clear",
-  "arguments": {
-    "node": "drive0",
-    "name": "bitmap0"
-  }
-}
-```
-
-## Transactions
-
-### Justification
-
-Bitmaps can be safely modified when the VM is paused or halted by using
-the basic QMP commands. For instance, you might perform the following actions:
-
-1. Boot the VM in a paused state.
-2. Create a full drive backup of drive0.
-3. Create a new bitmap attached to drive0.
-4. Resume execution of the VM.
-5. Incremental backups are ready to be created.
-
-At this point, the bitmap and drive backup would be correctly in sync,
-and incremental backups made from this point forward would be correctly aligned
-to the full drive backup.
-
-This is not particularly useful if we decide we want to start incremental
-backups after the VM has been running for a while, for which we will need to
-perform actions such as the following:
-
-1. Boot the VM and begin execution.
-2. Using a single transaction, perform the following operations:
-    * Create bitmap0.
-    * Create a full drive backup of drive0.
-3. Incremental backups are now ready to be created.
-
-### Supported Bitmap Transactions
-
-* block-dirty-bitmap-add
-* block-dirty-bitmap-clear
-
-The usages are identical to their respective QMP commands, but see below
-for examples.
-
-### Example: New Incremental Backup
-
-As outlined in the justification, perhaps we want to create a new incremental
-backup chain attached to a drive.
-
-```json
-{ "execute": "transaction",
-  "arguments": {
-    "actions": [
-      {"type": "block-dirty-bitmap-add",
-       "data": {"node": "drive0", "name": "bitmap0"} },
-      {"type": "drive-backup",
-       "data": {"device": "drive0", "target": "/path/to/full_backup.img",
-                "sync": "full", "format": "qcow2"} }
-    ]
-  }
-}
-```
-
-### Example: New Incremental Backup Anchor Point
-
-Maybe we just want to create a new full backup with an existing bitmap and
-want to reset the bitmap to track the new chain.
-
-```json
-{ "execute": "transaction",
-  "arguments": {
-    "actions": [
-      {"type": "block-dirty-bitmap-clear",
-       "data": {"node": "drive0", "name": "bitmap0"} },
-      {"type": "drive-backup",
-       "data": {"device": "drive0", "target": "/path/to/new_full_backup.img",
-                "sync": "full", "format": "qcow2"} }
-    ]
-  }
-}
-```
-
-## Incremental Backups
-
-The star of the show.
-
-**Nota Bene!** Only incremental backups of entire drives are supported for now.
-So despite the fact that you can attach a bitmap to any arbitrary node, they are
-only currently useful when attached to the root node. This is because
-drive-backup only supports drives/devices instead of arbitrary nodes.
-
-### Example: First Incremental Backup
-
-1. Create a full backup and sync it to the dirty bitmap, as in the transactional
-examples above; or with the VM offline, manually create a full copy and then
-create a new bitmap before the VM begins execution.
-
-    * Let's assume the full backup is named 'full_backup.img'.
-    * Let's assume the bitmap you created is 'bitmap0' attached to 'drive0'.
-
-2. Create a destination image for the incremental backup that utilizes the
-full backup as a backing image.
-
-    * Let's assume it is named 'incremental.0.img'.
-
-    ```sh
-    # qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
-    ```
-
-3. Issue the incremental backup command:
-
-    ```json
-    { "execute": "drive-backup",
-      "arguments": {
-        "device": "drive0",
-        "bitmap": "bitmap0",
-        "target": "incremental.0.img",
-        "format": "qcow2",
-        "sync": "incremental",
-        "mode": "existing"
-      }
-    }
-    ```
-
-### Example: Second Incremental Backup
-
-1. Create a new destination image for the incremental backup that points to the
-   previous one, e.g.: 'incremental.1.img'
-
-    ```sh
-    # qemu-img create -f qcow2 incremental.1.img -b incremental.0.img -F qcow2
-    ```
-
-2. Issue a new incremental backup command. The only difference here is that we
-   have changed the target image below.
-
-    ```json
-    { "execute": "drive-backup",
-      "arguments": {
-        "device": "drive0",
-        "bitmap": "bitmap0",
-        "target": "incremental.1.img",
-        "format": "qcow2",
-        "sync": "incremental",
-        "mode": "existing"
-      }
-    }
-    ```
-
-## Errors
-
-* In the event of an error that occurs after a backup job is successfully
-  launched, either by a direct QMP command or a QMP transaction, the user
-  will receive a BLOCK_JOB_COMPLETE event with a failure message, accompanied
-  by a BLOCK_JOB_ERROR event.
-
-* In the case of an event being cancelled, the user will receive a
-  BLOCK_JOB_CANCELLED event instead of a pair of COMPLETE and ERROR events.
-
-* In either case, the incremental backup data contained within the bitmap is
-  safely rolled back, and the data within the bitmap is not lost. The image
-  file created for the failed attempt can be safely deleted.
-
-* Once the underlying problem is fixed (e.g. more storage space is freed up),
-  you can simply retry the incremental backup command with the same bitmap.
-
-### Example
-
-1. Create a target image:
-
-    ```sh
-    # qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
-    ```
-
-2. Attempt to create an incremental backup via QMP:
-
-    ```json
-    { "execute": "drive-backup",
-      "arguments": {
-        "device": "drive0",
-        "bitmap": "bitmap0",
-        "target": "incremental.0.img",
-        "format": "qcow2",
-        "sync": "incremental",
-        "mode": "existing"
-      }
-    }
-    ```
-
-3. Receive an event notifying us of failure:
-
-    ```json
-    { "timestamp": { "seconds": 1424709442, "microseconds": 844524 },
-      "data": { "speed": 0, "offset": 0, "len": 67108864,
-                "error": "No space left on device",
-                "device": "drive1", "type": "backup" },
-      "event": "BLOCK_JOB_COMPLETED" }
-    ```
-
-4. Delete the failed incremental, and re-create the image.
-
-    ```sh
-    # rm incremental.0.img
-    # qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
-    ```
-
-5. Retry the command after fixing the underlying problem,
-   such as freeing up space on the backup volume:
-
-    ```json
-    { "execute": "drive-backup",
-      "arguments": {
-        "device": "drive0",
-        "bitmap": "bitmap0",
-        "target": "incremental.0.img",
-        "format": "qcow2",
-        "sync": "incremental",
-        "mode": "existing"
-      }
-    }
-    ```
-
-6. Receive confirmation that the job completed successfully:
-
-    ```json
-    { "timestamp": { "seconds": 1424709668, "microseconds": 526525 },
-      "data": { "device": "drive1", "type": "backup",
-                "speed": 0, "len": 67108864, "offset": 67108864},
-      "event": "BLOCK_JOB_COMPLETED" }
-    ```
-
-### Partial Transactional Failures
-
-* Sometimes, a transaction will succeed in launching and return success,
-  but then later the backup jobs themselves may fail. It is possible that
-  a management application may have to deal with a partial backup failure
-  after a successful transaction.
-
-* If multiple backup jobs are specified in a single transaction, when one of
-  them fails, it will not interact with the other backup jobs in any way.
-
-* The job(s) that succeeded will clear the dirty bitmap associated with the
-  operation, but the job(s) that failed will not. It is not "safe" to delete
-  any incremental backups that were created successfully in this scenario,
-  even though others failed.
-
-#### Example
-
-* QMP example highlighting two backup jobs:
-
-    ```json
-    { "execute": "transaction",
-      "arguments": {
-        "actions": [
-          { "type": "drive-backup",
-            "data": { "device": "drive0", "bitmap": "bitmap0",
-                      "format": "qcow2", "mode": "existing",
-                      "sync": "incremental", "target": "d0-incr-1.qcow2" } },
-          { "type": "drive-backup",
-            "data": { "device": "drive1", "bitmap": "bitmap1",
-                      "format": "qcow2", "mode": "existing",
-                      "sync": "incremental", "target": "d1-incr-1.qcow2" } },
-        ]
-      }
-    }
-    ```
-
-* QMP example response, highlighting one success and one failure:
-    * Acknowledgement that the Transaction was accepted and jobs were launched:
-        ```json
-        { "return": {} }
-        ```
-
-    * Later, QEMU sends notice that the first job was completed:
-        ```json
-        { "timestamp": { "seconds": 1447192343, "microseconds": 615698 },
-          "data": { "device": "drive0", "type": "backup",
-                     "speed": 0, "len": 67108864, "offset": 67108864 },
-          "event": "BLOCK_JOB_COMPLETED"
-        }
-        ```
-
-    * Later yet, QEMU sends notice that the second job has failed:
-        ```json
-        { "timestamp": { "seconds": 1447192399, "microseconds": 683015 },
-          "data": { "device": "drive1", "action": "report",
-                    "operation": "read" },
-          "event": "BLOCK_JOB_ERROR" }
-        ```
-
-        ```json
-        { "timestamp": { "seconds": 1447192399, "microseconds": 685853 },
-          "data": { "speed": 0, "offset": 0, "len": 67108864,
-                    "error": "Input/output error",
-                    "device": "drive1", "type": "backup" },
-          "event": "BLOCK_JOB_COMPLETED" }
-
-* In the above example, "d0-incr-1.qcow2" is valid and must be kept,
-  but "d1-incr-1.qcow2" is invalid and should be deleted. If a VM-wide
-  incremental backup of all drives at a point-in-time is to be made,
-  new backups for both drives will need to be made, taking into account
-  that a new incremental backup for drive0 needs to be based on top of
-  "d0-incr-1.qcow2."
-
-### Grouped Completion Mode
-
-* While jobs launched by transactions normally complete or fail on their own,
-  it is possible to instruct them to complete or fail together as a group.
-
-* QMP transactions take an optional properties structure that can affect
-  the semantics of the transaction.
-
-* The "completion-mode" transaction property can be either "individual"
-  which is the default, legacy behavior described above, or "grouped,"
-  a new behavior detailed below.
-
-* Delayed Completion: In grouped completion mode, no jobs will report
-  success until all jobs are ready to report success.
-
-* Grouped failure: If any job fails in grouped completion mode, all remaining
-  jobs will be cancelled. Any incremental backups will restore their dirty
-  bitmap objects as if no backup command was ever issued.
-
-    * Regardless of if QEMU reports a particular incremental backup job as
-      CANCELLED or as an ERROR, the in-memory bitmap will be restored.
-
-#### Example
-
-* Here's the same example scenario from above with the new property:
-
-    ```json
-    { "execute": "transaction",
-      "arguments": {
-        "actions": [
-          { "type": "drive-backup",
-            "data": { "device": "drive0", "bitmap": "bitmap0",
-                      "format": "qcow2", "mode": "existing",
-                      "sync": "incremental", "target": "d0-incr-1.qcow2" } },
-          { "type": "drive-backup",
-            "data": { "device": "drive1", "bitmap": "bitmap1",
-                      "format": "qcow2", "mode": "existing",
-                      "sync": "incremental", "target": "d1-incr-1.qcow2" } },
-        ],
-        "properties": {
-          "completion-mode": "grouped"
-        }
-      }
-    }
-    ```
-
-* QMP example response, highlighting a failure for drive2:
-    * Acknowledgement that the Transaction was accepted and jobs were launched:
-        ```json
-        { "return": {} }
-        ```
-
-    * Later, QEMU sends notice that the second job has errored out,
-      but that the first job was also cancelled:
-        ```json
-        { "timestamp": { "seconds": 1447193702, "microseconds": 632377 },
-          "data": { "device": "drive1", "action": "report",
-                    "operation": "read" },
-          "event": "BLOCK_JOB_ERROR" }
-        ```
-
-        ```json
-        { "timestamp": { "seconds": 1447193702, "microseconds": 640074 },
-          "data": { "speed": 0, "offset": 0, "len": 67108864,
-                    "error": "Input/output error",
-                    "device": "drive1", "type": "backup" },
-          "event": "BLOCK_JOB_COMPLETED" }
-        ```
-
-        ```json
-        { "timestamp": { "seconds": 1447193702, "microseconds": 640163 },
-          "data": { "device": "drive0", "type": "backup", "speed": 0,
-                    "len": 67108864, "offset": 16777216 },
-          "event": "BLOCK_JOB_CANCELLED" }
-        ```
-
-<!--
-The FreeBSD Documentation License
-
-Redistribution and use in source (Markdown) and 'compiled' forms (SGML, HTML,
-PDF, PostScript, RTF and so forth) with or without modification, are permitted
-provided that the following conditions are met:
-
-Redistributions of source code (Markdown) must retain the above copyright
-notice, this list of conditions and the following disclaimer of this file
-unmodified.
-
-Redistributions in compiled form (transformed to other DTDs, converted to PDF,
-PostScript, RTF and other formats) must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation and/or
-other materials provided with the distribution.
-
-THIS DOCUMENTATION IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS  BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--->
diff --git a/docs/interop/bitmaps.rst b/docs/interop/bitmaps.rst
new file mode 100644
index 0000000000..7bcfe7f461
--- /dev/null
+++ b/docs/interop/bitmaps.rst
@@ -0,0 +1,555 @@
+..
+   Copyright 2015 John Snow <jsnow@redhat.com> and Red Hat, Inc.
+   All rights reserved.
+
+   This file is licensed via The FreeBSD Documentation License, the full
+   text of which is included at the end of this document.
+
+====================================
+Dirty Bitmaps and Incremental Backup
+====================================
+
+-  Dirty Bitmaps are objects that track which data needs to be backed up
+   for the next incremental backup.
+
+-  Dirty bitmaps can be created at any time and attached to any node
+   (not just complete drives).
+
+.. contents::
+
+Dirty Bitmap Names
+------------------
+
+-  A dirty bitmap's name is unique to the node, but bitmaps attached to
+   different nodes can share the same name.
+
+-  Dirty bitmaps created for internal use by QEMU may be anonymous and
+   have no name, but any user-created bitmaps must have a name. There
+   can be any number of anonymous bitmaps per node.
+
+-  The name of a user-created bitmap must not be empty ("").
+
+Bitmap Modes
+------------
+
+-  A bitmap can be "frozen," which means that it is currently in-use by
+   a backup operation and cannot be deleted, renamed, written to, reset,
+   etc.
+
+-  The normal operating mode for a bitmap is "active."
+
+Basic QMP Usage
+---------------
+
+Supported Commands
+~~~~~~~~~~~~~~~~~~
+
+- ``block-dirty-bitmap-add``
+- ``block-dirty-bitmap-remove``
+- ``block-dirty-bitmap-clear``
+
+Creation
+~~~~~~~~
+
+-  To create a new bitmap, enabled, on the drive with id=drive0:
+
+.. code:: json
+
+    { "execute": "block-dirty-bitmap-add",
+      "arguments": {
+        "node": "drive0",
+        "name": "bitmap0"
+      }
+    }
+
+-  This bitmap will have a default granularity that matches the cluster
+   size of its associated drive, if available, clamped to between [4KiB,
+   64KiB]. The current default for qcow2 is 64KiB.
+
+-  To create a new bitmap that tracks changes in 32KiB segments:
+
+.. code:: json
+
+    { "execute": "block-dirty-bitmap-add",
+      "arguments": {
+        "node": "drive0",
+        "name": "bitmap0",
+        "granularity": 32768
+      }
+    }
+
+Deletion
+~~~~~~~~
+
+-  Bitmaps that are frozen cannot be deleted.
+
+-  Deleting the bitmap does not impact any other bitmaps attached to the
+   same node, nor does it affect any backups already created from this
+   node.
+
+-  Because bitmaps are only unique to the node to which they are
+   attached, you must specify the node/drive name here, too.
+
+.. code:: json
+
+    { "execute": "block-dirty-bitmap-remove",
+      "arguments": {
+        "node": "drive0",
+        "name": "bitmap0"
+      }
+    }
+
+Resetting
+~~~~~~~~~
+
+-  Resetting a bitmap will clear all information it holds.
+
+-  An incremental backup created from an empty bitmap will copy no data,
+   as if nothing has changed.
+
+.. code:: json
+
+    { "execute": "block-dirty-bitmap-clear",
+      "arguments": {
+        "node": "drive0",
+        "name": "bitmap0"
+      }
+    }
+
+Transactions
+------------
+
+Justification
+~~~~~~~~~~~~~
+
+Bitmaps can be safely modified when the VM is paused or halted by using
+the basic QMP commands. For instance, you might perform the following
+actions:
+
+1. Boot the VM in a paused state.
+2. Create a full drive backup of drive0.
+3. Create a new bitmap attached to drive0.
+4. Resume execution of the VM.
+5. Incremental backups are ready to be created.
+
+At this point, the bitmap and drive backup would be correctly in sync,
+and incremental backups made from this point forward would be correctly
+aligned to the full drive backup.
+
+This is not particularly useful if we decide we want to start
+incremental backups after the VM has been running for a while, for which
+we will need to perform actions such as the following:
+
+1. Boot the VM and begin execution.
+2. Using a single transaction, perform the following operations:
+
+   -  Create ``bitmap0``.
+   -  Create a full drive backup of ``drive0``.
+
+3. Incremental backups are now ready to be created.
+
+Supported Bitmap Transactions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+-  ``block-dirty-bitmap-add``
+-  ``block-dirty-bitmap-clear``
+
+The usages are identical to their respective QMP commands, but see below
+for examples.
+
+Example: New Incremental Backup
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As outlined in the justification, perhaps we want to create a new
+incremental backup chain attached to a drive.
+
+.. code:: json
+
+    { "execute": "transaction",
+      "arguments": {
+        "actions": [
+          {"type": "block-dirty-bitmap-add",
+           "data": {"node": "drive0", "name": "bitmap0"} },
+          {"type": "drive-backup",
+           "data": {"device": "drive0", "target": "/path/to/full_backup.img",
+                    "sync": "full", "format": "qcow2"} }
+        ]
+      }
+    }
+
+Example: New Incremental Backup Anchor Point
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Maybe we just want to create a new full backup with an existing bitmap
+and want to reset the bitmap to track the new chain.
+
+.. code:: json
+
+    { "execute": "transaction",
+      "arguments": {
+        "actions": [
+          {"type": "block-dirty-bitmap-clear",
+           "data": {"node": "drive0", "name": "bitmap0"} },
+          {"type": "drive-backup",
+           "data": {"device": "drive0", "target": "/path/to/new_full_backup.img",
+                    "sync": "full", "format": "qcow2"} }
+        ]
+      }
+    }
+
+Incremental Backups
+-------------------
+
+The star of the show.
+
+**Nota Bene!** Only incremental backups of entire drives are supported
+for now. So despite the fact that you can attach a bitmap to any
+arbitrary node, they are only currently useful when attached to the root
+node. This is because drive-backup only supports drives/devices instead
+of arbitrary nodes.
+
+Example: First Incremental Backup
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+1. Create a full backup and sync it to the dirty bitmap, as in the
+   transactional examples above; or with the VM offline, manually create
+   a full copy and then create a new bitmap before the VM begins
+   execution.
+
+   -  Let's assume the full backup is named ``full_backup.img``.
+   -  Let's assume the bitmap you created is ``bitmap0`` attached to
+      ``drive0``.
+
+2. Create a destination image for the incremental backup that utilizes
+   the full backup as a backing image.
+
+   -  Let's assume the new incremental image is named
+      ``incremental.0.img``.
+
+   .. code:: bash
+
+       $ qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
+
+3. Issue the incremental backup command:
+
+   .. code:: json
+
+       { "execute": "drive-backup",
+         "arguments": {
+           "device": "drive0",
+           "bitmap": "bitmap0",
+           "target": "incremental.0.img",
+           "format": "qcow2",
+           "sync": "incremental",
+           "mode": "existing"
+         }
+       }
+
+Example: Second Incremental Backup
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+1. Create a new destination image for the incremental backup that points
+   to the previous one, e.g.: ``incremental.1.img``
+
+   .. code:: bash
+
+       $ qemu-img create -f qcow2 incremental.1.img -b incremental.0.img -F qcow2
+
+2. Issue a new incremental backup command. The only difference here is
+   that we have changed the target image below.
+
+   .. code:: json
+
+       { "execute": "drive-backup",
+         "arguments": {
+           "device": "drive0",
+           "bitmap": "bitmap0",
+           "target": "incremental.1.img",
+           "format": "qcow2",
+           "sync": "incremental",
+           "mode": "existing"
+         }
+       }
+
+Errors
+------
+
+-  In the event of an error that occurs after a backup job is
+   successfully launched, either by a direct QMP command or a QMP
+   transaction, the user will receive a ``BLOCK_JOB_COMPLETE`` event with
+   a failure message, accompanied by a ``BLOCK_JOB_ERROR`` event.
+
+-  In the case of an event being cancelled, the user will receive a
+   ``BLOCK_JOB_CANCELLED`` event instead of a pair of COMPLETE and ERROR
+   events.
+
+-  In either case, the incremental backup data contained within the
+   bitmap is safely rolled back, and the data within the bitmap is not
+   lost. The image file created for the failed attempt can be safely
+   deleted.
+
+-  Once the underlying problem is fixed (e.g. more storage space is
+   freed up), you can simply retry the incremental backup command with
+   the same bitmap.
+
+Example
+~~~~~~~
+
+1. Create a target image:
+
+   .. code:: bash
+
+       $ qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
+
+2. Attempt to create an incremental backup via QMP:
+
+   .. code:: json
+
+       { "execute": "drive-backup",
+         "arguments": {
+           "device": "drive0",
+           "bitmap": "bitmap0",
+           "target": "incremental.0.img",
+           "format": "qcow2",
+           "sync": "incremental",
+           "mode": "existing"
+         }
+       }
+
+3. Receive an event notifying us of failure:
+
+   .. code:: json
+
+       { "timestamp": { "seconds": 1424709442, "microseconds": 844524 },
+         "data": { "speed": 0, "offset": 0, "len": 67108864,
+                   "error": "No space left on device",
+                   "device": "drive1", "type": "backup" },
+         "event": "BLOCK_JOB_COMPLETED" }
+
+4. Delete the failed incremental, and re-create the image.
+
+   .. code:: bash
+
+       $ rm incremental.0.img
+       $ qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
+
+5. Retry the command after fixing the underlying problem, such as
+   freeing up space on the backup volume:
+
+   .. code:: json
+
+       { "execute": "drive-backup",
+         "arguments": {
+           "device": "drive0",
+           "bitmap": "bitmap0",
+           "target": "incremental.0.img",
+           "format": "qcow2",
+           "sync": "incremental",
+           "mode": "existing"
+         }
+       }
+
+6. Receive confirmation that the job completed successfully:
+
+   .. code:: json
+
+       { "timestamp": { "seconds": 1424709668, "microseconds": 526525 },
+         "data": { "device": "drive1", "type": "backup",
+                   "speed": 0, "len": 67108864, "offset": 67108864},
+         "event": "BLOCK_JOB_COMPLETED" }
+
+Partial Transactional Failures
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+-  Sometimes, a transaction will succeed in launching and return
+   success, but then later the backup jobs themselves may fail. It is
+   possible that a management application may have to deal with a
+   partial backup failure after a successful transaction.
+
+-  If multiple backup jobs are specified in a single transaction, when
+   one of them fails, it will not interact with the other backup jobs in
+   any way.
+
+-  The job(s) that succeeded will clear the dirty bitmap associated with
+   the operation, but the job(s) that failed will not. It is not "safe"
+   to delete any incremental backups that were created successfully in
+   this scenario, even though others failed.
+
+Example
+^^^^^^^
+
+-  QMP example highlighting two backup jobs:
+
+   .. code:: json
+
+       { "execute": "transaction",
+         "arguments": {
+           "actions": [
+             { "type": "drive-backup",
+               "data": { "device": "drive0", "bitmap": "bitmap0",
+                         "format": "qcow2", "mode": "existing",
+                         "sync": "incremental", "target": "d0-incr-1.qcow2" } },
+             { "type": "drive-backup",
+               "data": { "device": "drive1", "bitmap": "bitmap1",
+                         "format": "qcow2", "mode": "existing",
+                         "sync": "incremental", "target": "d1-incr-1.qcow2" } },
+           ]
+         }
+       }
+
+-  QMP example response, highlighting one success and one failure:
+
+   -  Acknowledgement that the Transaction was accepted and jobs were
+      launched:
+
+      .. code:: json
+
+          { "return": {} }
+
+   -  Later, QEMU sends notice that the first job was completed:
+
+      .. code:: json
+
+          { "timestamp": { "seconds": 1447192343, "microseconds": 615698 },
+            "data": { "device": "drive0", "type": "backup",
+                       "speed": 0, "len": 67108864, "offset": 67108864 },
+            "event": "BLOCK_JOB_COMPLETED"
+          }
+
+   -  Later yet, QEMU sends notice that the second job has failed:
+
+      .. code:: json
+
+          { "timestamp": { "seconds": 1447192399, "microseconds": 683015 },
+            "data": { "device": "drive1", "action": "report",
+                      "operation": "read" },
+            "event": "BLOCK_JOB_ERROR" }
+
+      .. code:: json
+
+          { "timestamp": { "seconds": 1447192399, "microseconds":
+          685853 }, "data": { "speed": 0, "offset": 0, "len": 67108864,
+          "error": "Input/output error", "device": "drive1", "type":
+          "backup" }, "event": "BLOCK_JOB_COMPLETED" }
+
+-  In the above example, ``d0-incr-1.qcow2`` is valid and must be kept,
+   but ``d1-incr-1.qcow2`` is invalid and should be deleted. If a VM-wide
+   incremental backup of all drives at a point-in-time is to be made,
+   new backups for both drives will need to be made, taking into account
+   that a new incremental backup for drive0 needs to be based on top of
+   ``d0-incr-1.qcow2``.
+
+Grouped Completion Mode
+~~~~~~~~~~~~~~~~~~~~~~~
+
+-  While jobs launched by transactions normally complete or fail on
+   their own, it is possible to instruct them to complete or fail
+   together as a group.
+
+-  QMP transactions take an optional properties structure that can
+   affect the semantics of the transaction.
+
+-  The "completion-mode" transaction property can be either "individual"
+   which is the default, legacy behavior described above, or "grouped,"
+   a new behavior detailed below.
+
+-  Delayed Completion: In grouped completion mode, no jobs will report
+   success until all jobs are ready to report success.
+
+-  Grouped failure: If any job fails in grouped completion mode, all
+   remaining jobs will be cancelled. Any incremental backups will
+   restore their dirty bitmap objects as if no backup command was ever
+   issued.
+
+   -  Regardless of if QEMU reports a particular incremental backup job
+      as CANCELLED or as an ERROR, the in-memory bitmap will be
+      restored.
+
+Example
+^^^^^^^
+
+-  Here's the same example scenario from above with the new property:
+
+   .. code:: json
+
+       { "execute": "transaction",
+         "arguments": {
+           "actions": [
+             { "type": "drive-backup",
+               "data": { "device": "drive0", "bitmap": "bitmap0",
+                         "format": "qcow2", "mode": "existing",
+                         "sync": "incremental", "target": "d0-incr-1.qcow2" } },
+             { "type": "drive-backup",
+               "data": { "device": "drive1", "bitmap": "bitmap1",
+                         "format": "qcow2", "mode": "existing",
+                         "sync": "incremental", "target": "d1-incr-1.qcow2" } },
+           ],
+           "properties": {
+             "completion-mode": "grouped"
+           }
+         }
+       }
+
+-  QMP example response, highlighting a failure for ``drive2``:
+
+   -  Acknowledgement that the Transaction was accepted and jobs were
+      launched:
+
+      .. code:: json
+
+          { "return": {} }
+
+   -  Later, QEMU sends notice that the second job has errored out, but
+      that the first job was also cancelled:
+
+      .. code:: json
+
+          { "timestamp": { "seconds": 1447193702, "microseconds": 632377 },
+            "data": { "device": "drive1", "action": "report",
+                      "operation": "read" },
+            "event": "BLOCK_JOB_ERROR" }
+
+      .. code:: json
+
+          { "timestamp": { "seconds": 1447193702, "microseconds": 640074 },
+            "data": { "speed": 0, "offset": 0, "len": 67108864,
+                      "error": "Input/output error",
+                      "device": "drive1", "type": "backup" },
+            "event": "BLOCK_JOB_COMPLETED" }
+
+      .. code:: json
+
+          { "timestamp": { "seconds": 1447193702, "microseconds": 640163 },
+            "data": { "device": "drive0", "type": "backup", "speed": 0,
+                      "len": 67108864, "offset": 16777216 },
+            "event": "BLOCK_JOB_CANCELLED" }
+
+.. raw:: html
+
+   <!--
+   The FreeBSD Documentation License
+
+   Redistribution and use in source (Markdown) and 'compiled' forms (SGML, HTML,
+   PDF, PostScript, RTF and so forth) with or without modification, are permitted
+   provided that the following conditions are met:
+
+   Redistributions of source code (Markdown) must retain the above copyright
+   notice, this list of conditions and the following disclaimer of this file
+   unmodified.
+
+   Redistributions in compiled form (transformed to other DTDs, converted to PDF,
+   PostScript, RTF and other formats) must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation and/or
+   other materials provided with the distribution.
+
+   THIS DOCUMENTATION IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  PURPOSE ARE
+   DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS  BE LIABLE
+   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+   CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+   THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+   -->