Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201110' into staging

target-arm queue:
 * hw/arm/Kconfig: ARM_V7M depends on PTIMER
 * Minor coding style fixes
 * docs: add some notes on the sbsa-ref machine
 * hw/arm/virt: Remove dependency on Cortex-A15 MPCore peripherals
 * target/arm: Fix neon VTBL/VTBX for len > 1
 * hw/arm/armsse: Correct expansion MPC interrupt lines
 * hw/misc/stm32f2xx_syscfg: Remove extraneous IRQ
 * hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup()
 * hw/arm/musicpal: Don't connect two qemu_irqs directly to the same input
 * hw/arm/musicpal: Only use qdev_get_gpio_in() when necessary
 * hw/arm/nseries: Check return value from load_image_targphys()
 * tests/qtest/npcm7xx_rng-test: count runs properly
 * target/arm/translate-neon.c: Handle VTBL UNDEF case before VFP access check

# gpg: Signature made Tue 10 Nov 2020 11:17:45 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201110:
  target/arm/translate-neon.c: Handle VTBL UNDEF case before VFP access check
  tests/qtest/npcm7xx_rng-test: count runs properly
  hw/arm/nseries: Check return value from load_image_targphys()
  hw/arm/musicpal: Only use qdev_get_gpio_in() when necessary
  hw/arm/musicpal: Don't connect two qemu_irqs directly to the same input
  hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup()
  hw/misc/stm32f2xx_syscfg: Remove extraneous IRQ
  hw/arm/armsse: Correct expansion MPC interrupt lines
  target/arm: Fix neon VTBL/VTBX for len > 1
  hw/arm/virt: Remove dependency on Cortex-A15 MPCore peripherals
  docs: add some notes on the sbsa-ref machine
  target/arm: add space before the open parenthesis '('
  target/arm: Don't use '#' flag of printf format
  target/arm: add spaces around operator
  ssi: Fix bad printf format specifiers
  hw/arm/Kconfig: ARM_V7M depends on PTIMER

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 32 insertions, 0 deletions

diff --git a/docs/system/arm/sbsa.rst b/docs/system/arm/sbsa.rst
new file mode 100644
index 0000000000..b8ecfdb62f
--- /dev/null
+++ b/docs/system/arm/sbsa.rst
@@ -0,0 +1,32 @@
+Arm Server Base System Architecture Reference board (``sbsa-ref``)
+==================================================================
+
+While the `virt` board is a generic board platform that doesn't match
+any real hardware the `sbsa-ref` board intends to look like real
+hardware. The `Server Base System Architecture
+<https://developer.arm.com/documentation/den0029/latest>` defines a
+minimum base line of hardware support and importantly how the firmware
+reports that to any operating system. It is a static system that
+reports a very minimal DT to the firmware for non-discoverable
+information about components affected by the qemu command line (i.e.
+cpus and memory). As a result it must have a firmware specifically
+built to expect a certain hardware layout (as you would in a real
+machine).
+
+It is intended to be a machine for developing firmware and testing
+standards compliance with operating systems.
+
+Supported devices
+"""""""""""""""""
+
+The sbsa-ref board supports:
+
+  - A configurable number of AArch64 CPUs
+  - GIC version 3
+  - System bus AHCI controller
+  - System bus EHCI controller
+  - CDROM and hard disc on AHCI bus
+  - E1000E ethernet card on PCIe bus
+  - VGA display adaptor on PCIe bus
+  - A generic SBSA watchdog device
+