migration: run pending/iterate callbacks out of big lock

This makes it possible to do blocking writes directly to the socket,
with no buffer in the middle.  For RAM, only the migration_bitmap_sync()
call needs the iothread lock.  For block migration, it is needed by
the block layer (including bdrv_drain_all and dirty bitmap access),
but because some code is shared between iterate and complete, all of
mig_save_device_dirty is run with the lock taken.

In the savevm case, the iterate callback runs within the big lock.
This is annoying because it complicates the rules.  Luckily we do not
need to do anything about it: the RAM iterate callback does not need
the iothread lock, and block migration never runs during savevm.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

1 files changed, 35 insertions, 2 deletions

diff --git a/block-migration.c b/block-migration.c
index b726c6c002..8da5f868af 100644
--- a/block-migration.c
+++ b/block-migration.c
@@ -107,6 +107,10 @@ static void blk_mig_unlock(void)
     qemu_mutex_unlock(&block_mig_state.lock);
 }
 
+/* Must run outside of the iothread lock during the bulk phase,
+ * or the VM will stall.
+ */
+
 static void blk_send(QEMUFile *f, BlkMigBlock * blk)
 {
     int len;
@@ -226,6 +230,8 @@ static void blk_mig_read_cb(void *opaque, int ret)
     blk_mig_unlock();
 }
 
+/* Called with no lock taken.  */
+
 static int mig_save_device_bulk(QEMUFile *f, BlkMigDevState *bmds)
 {
     int64_t total_sectors = bmds->total_sectors;
@@ -235,11 +241,13 @@ static int mig_save_device_bulk(QEMUFile *f, BlkMigDevState *bmds)
     int nr_sectors;
 
     if (bmds->shared_base) {
+        qemu_mutex_lock_iothread();
         while (cur_sector < total_sectors &&
                !bdrv_is_allocated(bs, cur_sector, MAX_IS_ALLOCATED_SEARCH,
                                   &nr_sectors)) {
             cur_sector += nr_sectors;
         }
+        qemu_mutex_unlock_iothread();
     }
 
     if (cur_sector >= total_sectors) {
@@ -272,15 +280,19 @@ static int mig_save_device_bulk(QEMUFile *f, BlkMigDevState *bmds)
     block_mig_state.submitted++;
     blk_mig_unlock();
 
+    qemu_mutex_lock_iothread();
     blk->aiocb = bdrv_aio_readv(bs, cur_sector, &blk->qiov,
                                 nr_sectors, blk_mig_read_cb, blk);
 
     bdrv_reset_dirty(bs, cur_sector, nr_sectors);
-    bmds->cur_sector = cur_sector + nr_sectors;
+    qemu_mutex_unlock_iothread();
 
+    bmds->cur_sector = cur_sector + nr_sectors;
     return (bmds->cur_sector >= total_sectors);
 }
 
+/* Called with iothread lock taken.  */
+
 static void set_dirty_tracking(int enable)
 {
     BlkMigDevState *bmds;
@@ -336,6 +348,8 @@ static void init_blk_migration(QEMUFile *f)
     bdrv_iterate(init_blk_migration_it, NULL);
 }
 
+/* Called with no lock taken.  */
+
 static int blk_mig_save_bulked_block(QEMUFile *f)
 {
     int64_t completed_sector_sum = 0;
@@ -382,6 +396,8 @@ static void blk_mig_reset_dirty_cursor(void)
     }
 }
 
+/* Called with iothread lock taken.  */
+
 static int mig_save_device_dirty(QEMUFile *f, BlkMigDevState *bmds,
                                  int is_async)
 {
@@ -451,7 +467,9 @@ error:
     return ret;
 }
 
-/* return value:
+/* Called with iothread lock taken.
+ *
+ * return value:
  * 0: too much data for max_downtime
  * 1: few enough data for max_downtime
 */
@@ -470,6 +488,8 @@ static int blk_mig_save_dirty_block(QEMUFile *f, int is_async)
     return ret;
 }
 
+/* Called with no locks taken.  */
+
 static int flush_blks(QEMUFile *f)
 {
     BlkMigBlock *blk;
@@ -509,6 +529,8 @@ static int flush_blks(QEMUFile *f)
     return ret;
 }
 
+/* Called with iothread lock taken.  */
+
 static int64_t get_remaining_dirty(void)
 {
     BlkMigDevState *bmds;
@@ -521,6 +543,8 @@ static int64_t get_remaining_dirty(void)
     return dirty << BDRV_SECTOR_BITS;
 }
 
+/* Called with iothread lock taken.  */
+
 static void blk_mig_cleanup(void)
 {
     BlkMigDevState *bmds;
@@ -600,7 +624,12 @@ static int block_save_iterate(QEMUFile *f, void *opaque)
             }
             ret = 0;
         } else {
+            /* Always called with iothread lock taken for
+             * simplicity, block_save_complete also calls it.
+             */
+            qemu_mutex_lock_iothread();
             ret = blk_mig_save_dirty_block(f, 1);
+            qemu_mutex_unlock_iothread();
         }
         if (ret < 0) {
             return ret;
@@ -622,6 +651,8 @@ static int block_save_iterate(QEMUFile *f, void *opaque)
     return qemu_ftell(f) - last_ftell;
 }
 
+/* Called with iothread lock taken.  */
+
 static int block_save_complete(QEMUFile *f, void *opaque)
 {
     int ret;
@@ -665,6 +696,7 @@ static uint64_t block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size)
     /* Estimate pending number of bytes to send */
     uint64_t pending;
 
+    qemu_mutex_lock_iothread();
     blk_mig_lock();
     pending = get_remaining_dirty() +
                        block_mig_state.submitted * BLOCK_SIZE +
@@ -675,6 +707,7 @@ static uint64_t block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size)
         pending = BLOCK_SIZE;
     }
     blk_mig_unlock();
+    qemu_mutex_unlock_iothread();
 
     DPRINTF("Enter save live pending  %" PRIu64 "\n", pending);
     return pending;