migration: move ram stuff to migration/ram

For historic reasons, ram migration have been on arch_init.c.  Just
split it into migration/ram.c, the same that happened with block.c.

There is only code movement, no changes altogether.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

1 files changed, 0 insertions, 1588 deletions

diff --git a/arch_init.c b/arch_init.c
index d29447497b..63c44d379a 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -55,14 +55,6 @@
 #include "qemu/host-utils.h"
 #include "qemu/rcu_queue.h"
 
-#ifdef DEBUG_ARCH_INIT
-#define DPRINTF(fmt, ...) \
-    do { fprintf(stdout, "arch_init: " fmt, ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) \
-    do { } while (0)
-#endif
-
 #ifdef TARGET_SPARC
 int graphic_width = 1024;
 int graphic_height = 768;
@@ -111,24 +103,6 @@ int graphic_depth = 32;
 #endif
 
 const uint32_t arch_type = QEMU_ARCH;
-static bool mig_throttle_on;
-static int dirty_rate_high_cnt;
-static void check_guest_throttling(void);
-
-static uint64_t bitmap_sync_count;
-
-/***********************************************************/
-/* ram save/restore */
-
-#define RAM_SAVE_FLAG_FULL     0x01 /* Obsolete, not used anymore */
-#define RAM_SAVE_FLAG_COMPRESS 0x02
-#define RAM_SAVE_FLAG_MEM_SIZE 0x04
-#define RAM_SAVE_FLAG_PAGE     0x08
-#define RAM_SAVE_FLAG_EOS      0x10
-#define RAM_SAVE_FLAG_CONTINUE 0x20
-#define RAM_SAVE_FLAG_XBZRLE   0x40
-/* 0x80 is reserved in migration.h start with 0x100 next */
-#define RAM_SAVE_FLAG_COMPRESS_PAGE    0x100
 
 static struct defconfig_file {
     const char *filename;
@@ -139,8 +113,6 @@ static struct defconfig_file {
     { NULL }, /* end of list */
 };
 
-static const uint8_t ZERO_TARGET_PAGE[TARGET_PAGE_SIZE];
-
 int qemu_read_default_config_files(bool userconfig)
 {
     int ret;
@@ -159,1517 +131,6 @@ int qemu_read_default_config_files(bool userconfig)
     return 0;
 }
 
-static inline bool is_zero_range(uint8_t *p, uint64_t size)
-{
-    return buffer_find_nonzero_offset(p, size) == size;
-}
-
-/* struct contains XBZRLE cache and a static page
-   used by the compression */
-static struct {
-    /* buffer used for XBZRLE encoding */
-    uint8_t *encoded_buf;
-    /* buffer for storing page content */
-    uint8_t *current_buf;
-    /* Cache for XBZRLE, Protected by lock. */
-    PageCache *cache;
-    QemuMutex lock;
-} XBZRLE;
-
-/* buffer used for XBZRLE decoding */
-static uint8_t *xbzrle_decoded_buf;
-
-static void XBZRLE_cache_lock(void)
-{
-    if (migrate_use_xbzrle())
-        qemu_mutex_lock(&XBZRLE.lock);
-}
-
-static void XBZRLE_cache_unlock(void)
-{
-    if (migrate_use_xbzrle())
-        qemu_mutex_unlock(&XBZRLE.lock);
-}
-
-/*
- * called from qmp_migrate_set_cache_size in main thread, possibly while
- * a migration is in progress.
- * A running migration maybe using the cache and might finish during this
- * call, hence changes to the cache are protected by XBZRLE.lock().
- */
-int64_t xbzrle_cache_resize(int64_t new_size)
-{
-    PageCache *new_cache;
-    int64_t ret;
-
-    if (new_size < TARGET_PAGE_SIZE) {
-        return -1;
-    }
-
-    XBZRLE_cache_lock();
-
-    if (XBZRLE.cache != NULL) {
-        if (pow2floor(new_size) == migrate_xbzrle_cache_size()) {
-            goto out_new_size;
-        }
-        new_cache = cache_init(new_size / TARGET_PAGE_SIZE,
-                                        TARGET_PAGE_SIZE);
-        if (!new_cache) {
-            error_report("Error creating cache");
-            ret = -1;
-            goto out;
-        }
-
-        cache_fini(XBZRLE.cache);
-        XBZRLE.cache = new_cache;
-    }
-
-out_new_size:
-    ret = pow2floor(new_size);
-out:
-    XBZRLE_cache_unlock();
-    return ret;
-}
-
-/* accounting for migration statistics */
-typedef struct AccountingInfo {
-    uint64_t dup_pages;
-    uint64_t skipped_pages;
-    uint64_t norm_pages;
-    uint64_t iterations;
-    uint64_t xbzrle_bytes;
-    uint64_t xbzrle_pages;
-    uint64_t xbzrle_cache_miss;
-    double xbzrle_cache_miss_rate;
-    uint64_t xbzrle_overflows;
-} AccountingInfo;
-
-static AccountingInfo acct_info;
-
-static void acct_clear(void)
-{
-    memset(&acct_info, 0, sizeof(acct_info));
-}
-
-uint64_t dup_mig_bytes_transferred(void)
-{
-    return acct_info.dup_pages * TARGET_PAGE_SIZE;
-}
-
-uint64_t dup_mig_pages_transferred(void)
-{
-    return acct_info.dup_pages;
-}
-
-uint64_t skipped_mig_bytes_transferred(void)
-{
-    return acct_info.skipped_pages * TARGET_PAGE_SIZE;
-}
-
-uint64_t skipped_mig_pages_transferred(void)
-{
-    return acct_info.skipped_pages;
-}
-
-uint64_t norm_mig_bytes_transferred(void)
-{
-    return acct_info.norm_pages * TARGET_PAGE_SIZE;
-}
-
-uint64_t norm_mig_pages_transferred(void)
-{
-    return acct_info.norm_pages;
-}
-
-uint64_t xbzrle_mig_bytes_transferred(void)
-{
-    return acct_info.xbzrle_bytes;
-}
-
-uint64_t xbzrle_mig_pages_transferred(void)
-{
-    return acct_info.xbzrle_pages;
-}
-
-uint64_t xbzrle_mig_pages_cache_miss(void)
-{
-    return acct_info.xbzrle_cache_miss;
-}
-
-double xbzrle_mig_cache_miss_rate(void)
-{
-    return acct_info.xbzrle_cache_miss_rate;
-}
-
-uint64_t xbzrle_mig_pages_overflow(void)
-{
-    return acct_info.xbzrle_overflows;
-}
-
-/* This is the last block that we have visited serching for dirty pages
- */
-static RAMBlock *last_seen_block;
-/* This is the last block from where we have sent data */
-static RAMBlock *last_sent_block;
-static ram_addr_t last_offset;
-static unsigned long *migration_bitmap;
-static uint64_t migration_dirty_pages;
-static uint32_t last_version;
-static bool ram_bulk_stage;
-
-struct CompressParam {
-    bool start;
-    bool done;
-    QEMUFile *file;
-    QemuMutex mutex;
-    QemuCond cond;
-    RAMBlock *block;
-    ram_addr_t offset;
-};
-typedef struct CompressParam CompressParam;
-
-struct DecompressParam {
-    bool start;
-    QemuMutex mutex;
-    QemuCond cond;
-    void *des;
-    uint8 *compbuf;
-    int len;
-};
-typedef struct DecompressParam DecompressParam;
-
-static CompressParam *comp_param;
-static QemuThread *compress_threads;
-/* comp_done_cond is used to wake up the migration thread when
- * one of the compression threads has finished the compression.
- * comp_done_lock is used to co-work with comp_done_cond.
- */
-static QemuMutex *comp_done_lock;
-static QemuCond *comp_done_cond;
-/* The empty QEMUFileOps will be used by file in CompressParam */
-static const QEMUFileOps empty_ops = { };
-
-static bool compression_switch;
-static bool quit_comp_thread;
-static bool quit_decomp_thread;
-static DecompressParam *decomp_param;
-static QemuThread *decompress_threads;
-static uint8_t *compressed_data_buf;
-
-static int do_compress_ram_page(CompressParam *param);
-
-static void *do_data_compress(void *opaque)
-{
-    CompressParam *param = opaque;
-
-    while (!quit_comp_thread) {
-        qemu_mutex_lock(&param->mutex);
-        /* Re-check the quit_comp_thread in case of
-         * terminate_compression_threads is called just before
-         * qemu_mutex_lock(&param->mutex) and after
-         * while(!quit_comp_thread), re-check it here can make
-         * sure the compression thread terminate as expected.
-         */
-        while (!param->start && !quit_comp_thread) {
-            qemu_cond_wait(&param->cond, &param->mutex);
-        }
-        if (!quit_comp_thread) {
-            do_compress_ram_page(param);
-        }
-        param->start = false;
-        qemu_mutex_unlock(&param->mutex);
-
-        qemu_mutex_lock(comp_done_lock);
-        param->done = true;
-        qemu_cond_signal(comp_done_cond);
-        qemu_mutex_unlock(comp_done_lock);
-    }
-
-    return NULL;
-}
-
-static inline void terminate_compression_threads(void)
-{
-    int idx, thread_count;
-
-    thread_count = migrate_compress_threads();
-    quit_comp_thread = true;
-    for (idx = 0; idx < thread_count; idx++) {
-        qemu_mutex_lock(&comp_param[idx].mutex);
-        qemu_cond_signal(&comp_param[idx].cond);
-        qemu_mutex_unlock(&comp_param[idx].mutex);
-    }
-}
-
-void migrate_compress_threads_join(void)
-{
-    int i, thread_count;
-
-    if (!migrate_use_compression()) {
-        return;
-    }
-    terminate_compression_threads();
-    thread_count = migrate_compress_threads();
-    for (i = 0; i < thread_count; i++) {
-        qemu_thread_join(compress_threads + i);
-        qemu_fclose(comp_param[i].file);
-        qemu_mutex_destroy(&comp_param[i].mutex);
-        qemu_cond_destroy(&comp_param[i].cond);
-    }
-    qemu_mutex_destroy(comp_done_lock);
-    qemu_cond_destroy(comp_done_cond);
-    g_free(compress_threads);
-    g_free(comp_param);
-    g_free(comp_done_cond);
-    g_free(comp_done_lock);
-    compress_threads = NULL;
-    comp_param = NULL;
-    comp_done_cond = NULL;
-    comp_done_lock = NULL;
-}
-
-void migrate_compress_threads_create(void)
-{
-    int i, thread_count;
-
-    if (!migrate_use_compression()) {
-        return;
-    }
-    quit_comp_thread = false;
-    compression_switch = true;
-    thread_count = migrate_compress_threads();
-    compress_threads = g_new0(QemuThread, thread_count);
-    comp_param = g_new0(CompressParam, thread_count);
-    comp_done_cond = g_new0(QemuCond, 1);
-    comp_done_lock = g_new0(QemuMutex, 1);
-    qemu_cond_init(comp_done_cond);
-    qemu_mutex_init(comp_done_lock);
-    for (i = 0; i < thread_count; i++) {
-        /* com_param[i].file is just used as a dummy buffer to save data, set
-         * it's ops to empty.
-         */
-        comp_param[i].file = qemu_fopen_ops(NULL, &empty_ops);
-        comp_param[i].done = true;
-        qemu_mutex_init(&comp_param[i].mutex);
-        qemu_cond_init(&comp_param[i].cond);
-        qemu_thread_create(compress_threads + i, "compress",
-                           do_data_compress, comp_param + i,
-                           QEMU_THREAD_JOINABLE);
-    }
-}
-
-/**
- * save_page_header: Write page header to wire
- *
- * If this is the 1st block, it also writes the block identification
- *
- * Returns: Number of bytes written
- *
- * @f: QEMUFile where to send the data
- * @block: block that contains the page we want to send
- * @offset: offset inside the block for the page
- *          in the lower bits, it contains flags
- */
-static size_t save_page_header(QEMUFile *f, RAMBlock *block, ram_addr_t offset)
-{
-    size_t size;
-
-    qemu_put_be64(f, offset);
-    size = 8;
-
-    if (!(offset & RAM_SAVE_FLAG_CONTINUE)) {
-        qemu_put_byte(f, strlen(block->idstr));
-        qemu_put_buffer(f, (uint8_t *)block->idstr,
-                        strlen(block->idstr));
-        size += 1 + strlen(block->idstr);
-    }
-    return size;
-}
-
-/* Update the xbzrle cache to reflect a page that's been sent as all 0.
- * The important thing is that a stale (not-yet-0'd) page be replaced
- * by the new data.
- * As a bonus, if the page wasn't in the cache it gets added so that
- * when a small write is made into the 0'd page it gets XBZRLE sent
- */
-static void xbzrle_cache_zero_page(ram_addr_t current_addr)
-{
-    if (ram_bulk_stage || !migrate_use_xbzrle()) {
-        return;
-    }
-
-    /* We don't care if this fails to allocate a new cache page
-     * as long as it updated an old one */
-    cache_insert(XBZRLE.cache, current_addr, ZERO_TARGET_PAGE,
-                 bitmap_sync_count);
-}
-
-#define ENCODING_FLAG_XBZRLE 0x1
-
-/**
- * save_xbzrle_page: compress and send current page
- *
- * Returns: 1 means that we wrote the page
- *          0 means that page is identical to the one already sent
- *          -1 means that xbzrle would be longer than normal
- *
- * @f: QEMUFile where to send the data
- * @current_data:
- * @current_addr:
- * @block: block that contains the page we want to send
- * @offset: offset inside the block for the page
- * @last_stage: if we are at the completion stage
- * @bytes_transferred: increase it with the number of transferred bytes
- */
-static int save_xbzrle_page(QEMUFile *f, uint8_t **current_data,
-                            ram_addr_t current_addr, RAMBlock *block,
-                            ram_addr_t offset, bool last_stage,
-                            uint64_t *bytes_transferred)
-{
-    int encoded_len = 0, bytes_xbzrle;
-    uint8_t *prev_cached_page;
-
-    if (!cache_is_cached(XBZRLE.cache, current_addr, bitmap_sync_count)) {
-        acct_info.xbzrle_cache_miss++;
-        if (!last_stage) {
-            if (cache_insert(XBZRLE.cache, current_addr, *current_data,
-                             bitmap_sync_count) == -1) {
-                return -1;
-            } else {
-                /* update *current_data when the page has been
-                   inserted into cache */
-                *current_data = get_cached_data(XBZRLE.cache, current_addr);
-            }
-        }
-        return -1;
-    }
-
-    prev_cached_page = get_cached_data(XBZRLE.cache, current_addr);
-
-    /* save current buffer into memory */
-    memcpy(XBZRLE.current_buf, *current_data, TARGET_PAGE_SIZE);
-
-    /* XBZRLE encoding (if there is no overflow) */
-    encoded_len = xbzrle_encode_buffer(prev_cached_page, XBZRLE.current_buf,
-                                       TARGET_PAGE_SIZE, XBZRLE.encoded_buf,
-                                       TARGET_PAGE_SIZE);
-    if (encoded_len == 0) {
-        DPRINTF("Skipping unmodified page\n");
-        return 0;
-    } else if (encoded_len == -1) {
-        DPRINTF("Overflow\n");
-        acct_info.xbzrle_overflows++;
-        /* update data in the cache */
-        if (!last_stage) {
-            memcpy(prev_cached_page, *current_data, TARGET_PAGE_SIZE);
-            *current_data = prev_cached_page;
-        }
-        return -1;
-    }
-
-    /* we need to update the data in the cache, in order to get the same data */
-    if (!last_stage) {
-        memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
-    }
-
-    /* Send XBZRLE based compressed page */
-    bytes_xbzrle = save_page_header(f, block, offset | RAM_SAVE_FLAG_XBZRLE);
-    qemu_put_byte(f, ENCODING_FLAG_XBZRLE);
-    qemu_put_be16(f, encoded_len);
-    qemu_put_buffer(f, XBZRLE.encoded_buf, encoded_len);
-    bytes_xbzrle += encoded_len + 1 + 2;
-    acct_info.xbzrle_pages++;
-    acct_info.xbzrle_bytes += bytes_xbzrle;
-    *bytes_transferred += bytes_xbzrle;
-
-    return 1;
-}
-
-static inline
-ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,
-                                                 ram_addr_t start)
-{
-    unsigned long base = mr->ram_addr >> TARGET_PAGE_BITS;
-    unsigned long nr = base + (start >> TARGET_PAGE_BITS);
-    uint64_t mr_size = TARGET_PAGE_ALIGN(memory_region_size(mr));
-    unsigned long size = base + (mr_size >> TARGET_PAGE_BITS);
-
-    unsigned long next;
-
-    if (ram_bulk_stage && nr > base) {
-        next = nr + 1;
-    } else {
-        next = find_next_bit(migration_bitmap, size, nr);
-    }
-
-    if (next < size) {
-        clear_bit(next, migration_bitmap);
-        migration_dirty_pages--;
-    }
-    return (next - base) << TARGET_PAGE_BITS;
-}
-
-static void migration_bitmap_sync_range(ram_addr_t start, ram_addr_t length)
-{
-    migration_dirty_pages +=
-        cpu_physical_memory_sync_dirty_bitmap(migration_bitmap, start, length);
-}
-
-
-/* Fix me: there are too many global variables used in migration process. */
-static int64_t start_time;
-static int64_t bytes_xfer_prev;
-static int64_t num_dirty_pages_period;
-static uint64_t xbzrle_cache_miss_prev;
-static uint64_t iterations_prev;
-
-static void migration_bitmap_sync_init(void)
-{
-    start_time = 0;
-    bytes_xfer_prev = 0;
-    num_dirty_pages_period = 0;
-    xbzrle_cache_miss_prev = 0;
-    iterations_prev = 0;
-}
-
-/* Called with iothread lock held, to protect ram_list.dirty_memory[] */
-static void migration_bitmap_sync(void)
-{
-    RAMBlock *block;
-    uint64_t num_dirty_pages_init = migration_dirty_pages;
-    MigrationState *s = migrate_get_current();
-    int64_t end_time;
-    int64_t bytes_xfer_now;
-
-    bitmap_sync_count++;
-
-    if (!bytes_xfer_prev) {
-        bytes_xfer_prev = ram_bytes_transferred();
-    }
-
-    if (!start_time) {
-        start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
-    }
-
-    trace_migration_bitmap_sync_start();
-    address_space_sync_dirty_bitmap(&address_space_memory);
-
-    rcu_read_lock();
-    QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
-        migration_bitmap_sync_range(block->mr->ram_addr, block->used_length);
-    }
-    rcu_read_unlock();
-
-    trace_migration_bitmap_sync_end(migration_dirty_pages
-                                    - num_dirty_pages_init);
-    num_dirty_pages_period += migration_dirty_pages - num_dirty_pages_init;
-    end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
-
-    /* more than 1 second = 1000 millisecons */
-    if (end_time > start_time + 1000) {
-        if (migrate_auto_converge()) {
-            /* The following detection logic can be refined later. For now:
-               Check to see if the dirtied bytes is 50% more than the approx.
-               amount of bytes that just got transferred since the last time we
-               were in this routine. If that happens >N times (for now N==4)
-               we turn on the throttle down logic */
-            bytes_xfer_now = ram_bytes_transferred();
-            if (s->dirty_pages_rate &&
-               (num_dirty_pages_period * TARGET_PAGE_SIZE >
-                   (bytes_xfer_now - bytes_xfer_prev)/2) &&
-               (dirty_rate_high_cnt++ > 4)) {
-                    trace_migration_throttle();
-                    mig_throttle_on = true;
-                    dirty_rate_high_cnt = 0;
-             }
-             bytes_xfer_prev = bytes_xfer_now;
-        } else {
-             mig_throttle_on = false;
-        }
-        if (migrate_use_xbzrle()) {
-            if (iterations_prev != acct_info.iterations) {
-                acct_info.xbzrle_cache_miss_rate =
-                   (double)(acct_info.xbzrle_cache_miss -
-                            xbzrle_cache_miss_prev) /
-                   (acct_info.iterations - iterations_prev);
-            }
-            iterations_prev = acct_info.iterations;
-            xbzrle_cache_miss_prev = acct_info.xbzrle_cache_miss;
-        }
-        s->dirty_pages_rate = num_dirty_pages_period * 1000
-            / (end_time - start_time);
-        s->dirty_bytes_rate = s->dirty_pages_rate * TARGET_PAGE_SIZE;
-        start_time = end_time;
-        num_dirty_pages_period = 0;
-    }
-    s->dirty_sync_count = bitmap_sync_count;
-}
-
-/**
- * save_zero_page: Send the zero page to the stream
- *
- * Returns: Number of pages written.
- *
- * @f: QEMUFile where to send the data
- * @block: block that contains the page we want to send
- * @offset: offset inside the block for the page
- * @p: pointer to the page
- * @bytes_transferred: increase it with the number of transferred bytes
- */
-static int save_zero_page(QEMUFile *f, RAMBlock *block, ram_addr_t offset,
-                          uint8_t *p, uint64_t *bytes_transferred)
-{
-    int pages = -1;
-
-    if (is_zero_range(p, TARGET_PAGE_SIZE)) {
-        acct_info.dup_pages++;
-        *bytes_transferred += save_page_header(f, block,
-                                               offset | RAM_SAVE_FLAG_COMPRESS);
-        qemu_put_byte(f, 0);
-        *bytes_transferred += 1;
-        pages = 1;
-    }
-
-    return pages;
-}
-
-/**
- * ram_save_page: Send the given page to the stream
- *
- * Returns: Number of pages written.
- *
- * @f: QEMUFile where to send the data
- * @block: block that contains the page we want to send
- * @offset: offset inside the block for the page
- * @last_stage: if we are at the completion stage
- * @bytes_transferred: increase it with the number of transferred bytes
- */
-static int ram_save_page(QEMUFile *f, RAMBlock* block, ram_addr_t offset,
-                         bool last_stage, uint64_t *bytes_transferred)
-{
-    int pages = -1;
-    uint64_t bytes_xmit;
-    ram_addr_t current_addr;
-    MemoryRegion *mr = block->mr;
-    uint8_t *p;
-    int ret;
-    bool send_async = true;
-
-    p = memory_region_get_ram_ptr(mr) + offset;
-
-    /* In doubt sent page as normal */
-    bytes_xmit = 0;
-    ret = ram_control_save_page(f, block->offset,
-                           offset, TARGET_PAGE_SIZE, &bytes_xmit);
-    if (bytes_xmit) {
-        *bytes_transferred += bytes_xmit;
-        pages = 1;
-    }
-
-    XBZRLE_cache_lock();
-
-    current_addr = block->offset + offset;
-
-    if (block == last_sent_block) {
-        offset |= RAM_SAVE_FLAG_CONTINUE;
-    }
-    if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
-        if (ret != RAM_SAVE_CONTROL_DELAYED) {
-            if (bytes_xmit > 0) {
-                acct_info.norm_pages++;
-            } else if (bytes_xmit == 0) {
-                acct_info.dup_pages++;
-            }
-        }
-    } else {
-        pages = save_zero_page(f, block, offset, p, bytes_transferred);
-        if (pages > 0) {
-            /* Must let xbzrle know, otherwise a previous (now 0'd) cached
-             * page would be stale
-             */
-            xbzrle_cache_zero_page(current_addr);
-        } else if (!ram_bulk_stage && migrate_use_xbzrle()) {
-            pages = save_xbzrle_page(f, &p, current_addr, block,
-                                     offset, last_stage, bytes_transferred);
-            if (!last_stage) {
-                /* Can't send this cached data async, since the cache page
-                 * might get updated before it gets to the wire
-                 */
-                send_async = false;
-            }
-        }
-    }
-
-    /* XBZRLE overflow or normal page */
-    if (pages == -1) {
-        *bytes_transferred += save_page_header(f, block,
-                                               offset | RAM_SAVE_FLAG_PAGE);
-        if (send_async) {
-            qemu_put_buffer_async(f, p, TARGET_PAGE_SIZE);
-        } else {
-            qemu_put_buffer(f, p, TARGET_PAGE_SIZE);
-        }
-        *bytes_transferred += TARGET_PAGE_SIZE;
-        pages = 1;
-        acct_info.norm_pages++;
-    }
-
-    XBZRLE_cache_unlock();
-
-    return pages;
-}
-
-static int do_compress_ram_page(CompressParam *param)
-{
-    int bytes_sent, blen;
-    uint8_t *p;
-    RAMBlock *block = param->block;
-    ram_addr_t offset = param->offset;
-
-    p = memory_region_get_ram_ptr(block->mr) + (offset & TARGET_PAGE_MASK);
-
-    bytes_sent = save_page_header(param->file, block, offset |
-                                  RAM_SAVE_FLAG_COMPRESS_PAGE);
-    blen = qemu_put_compression_data(param->file, p, TARGET_PAGE_SIZE,
-                                     migrate_compress_level());
-    bytes_sent += blen;
-
-    return bytes_sent;
-}
-
-static inline void start_compression(CompressParam *param)
-{
-    param->done = false;
-    qemu_mutex_lock(&param->mutex);
-    param->start = true;
-    qemu_cond_signal(&param->cond);
-    qemu_mutex_unlock(&param->mutex);
-}
-
-static inline void start_decompression(DecompressParam *param)
-{
-    qemu_mutex_lock(&param->mutex);
-    param->start = true;
-    qemu_cond_signal(&param->cond);
-    qemu_mutex_unlock(&param->mutex);
-}
-
-static uint64_t bytes_transferred;
-
-static void flush_compressed_data(QEMUFile *f)
-{
-    int idx, len, thread_count;
-
-    if (!migrate_use_compression()) {
-        return;
-    }
-    thread_count = migrate_compress_threads();
-    for (idx = 0; idx < thread_count; idx++) {
-        if (!comp_param[idx].done) {
-            qemu_mutex_lock(comp_done_lock);
-            while (!comp_param[idx].done && !quit_comp_thread) {
-                qemu_cond_wait(comp_done_cond, comp_done_lock);
-            }
-            qemu_mutex_unlock(comp_done_lock);
-        }
-        if (!quit_comp_thread) {
-            len = qemu_put_qemu_file(f, comp_param[idx].file);
-            bytes_transferred += len;
-        }
-    }
-}
-
-static inline void set_compress_params(CompressParam *param, RAMBlock *block,
-                                       ram_addr_t offset)
-{
-    param->block = block;
-    param->offset = offset;
-}
-
-static int compress_page_with_multi_thread(QEMUFile *f, RAMBlock *block,
-                                           ram_addr_t offset,
-                                           uint64_t *bytes_transferred)
-{
-    int idx, thread_count, bytes_xmit = -1, pages = -1;
-
-    thread_count = migrate_compress_threads();
-    qemu_mutex_lock(comp_done_lock);
-    while (true) {
-        for (idx = 0; idx < thread_count; idx++) {
-            if (comp_param[idx].done) {
-                bytes_xmit = qemu_put_qemu_file(f, comp_param[idx].file);
-                set_compress_params(&comp_param[idx], block, offset);
-                start_compression(&comp_param[idx]);
-                pages = 1;
-                acct_info.norm_pages++;
-                *bytes_transferred += bytes_xmit;
-                break;
-            }
-        }
-        if (pages > 0) {
-            break;
-        } else {
-            qemu_cond_wait(comp_done_cond, comp_done_lock);
-        }
-    }
-    qemu_mutex_unlock(comp_done_lock);
-
-    return pages;
-}
-
-/**
- * ram_save_compressed_page: compress the given page and send it to the stream
- *
- * Returns: Number of pages written.
- *
- * @f: QEMUFile where to send the data
- * @block: block that contains the page we want to send
- * @offset: offset inside the block for the page
- * @last_stage: if we are at the completion stage
- * @bytes_transferred: increase it with the number of transferred bytes
- */
-static int ram_save_compressed_page(QEMUFile *f, RAMBlock *block,
-                                    ram_addr_t offset, bool last_stage,
-                                    uint64_t *bytes_transferred)
-{
-    int pages = -1;
-    uint64_t bytes_xmit;
-    MemoryRegion *mr = block->mr;
-    uint8_t *p;
-    int ret;
-
-    p = memory_region_get_ram_ptr(mr) + offset;
-
-    bytes_xmit = 0;
-    ret = ram_control_save_page(f, block->offset,
-                                offset, TARGET_PAGE_SIZE, &bytes_xmit);
-    if (bytes_xmit) {
-        *bytes_transferred += bytes_xmit;
-        pages = 1;
-    }
-    if (block == last_sent_block) {
-        offset |= RAM_SAVE_FLAG_CONTINUE;
-    }
-    if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
-        if (ret != RAM_SAVE_CONTROL_DELAYED) {
-            if (bytes_xmit > 0) {
-                acct_info.norm_pages++;
-            } else if (bytes_xmit == 0) {
-                acct_info.dup_pages++;
-            }
-        }
-    } else {
-        /* When starting the process of a new block, the first page of
-         * the block should be sent out before other pages in the same
-         * block, and all the pages in last block should have been sent
-         * out, keeping this order is important, because the 'cont' flag
-         * is used to avoid resending the block name.
-         */
-        if (block != last_sent_block) {
-            flush_compressed_data(f);
-            pages = save_zero_page(f, block, offset, p, bytes_transferred);
-            if (pages == -1) {
-                set_compress_params(&comp_param[0], block, offset);
-                /* Use the qemu thread to compress the data to make sure the
-                 * first page is sent out before other pages
-                 */
-                bytes_xmit = do_compress_ram_page(&comp_param[0]);
-                acct_info.norm_pages++;
-                qemu_put_qemu_file(f, comp_param[0].file);
-                *bytes_transferred += bytes_xmit;
-                pages = 1;
-            }
-        } else {
-            pages = save_zero_page(f, block, offset, p, bytes_transferred);
-            if (pages == -1) {
-                pages = compress_page_with_multi_thread(f, block, offset,
-                                                        bytes_transferred);
-            }
-        }
-    }
-
-    return pages;
-}
-
-/**
- * ram_find_and_save_block: Finds a dirty page and sends it to f
- *
- * Called within an RCU critical section.
- *
- * Returns:  The number of pages written
- *           0 means no dirty pages
- *
- * @f: QEMUFile where to send the data
- * @last_stage: if we are at the completion stage
- * @bytes_transferred: increase it with the number of transferred bytes
- */
-
-static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
-                                   uint64_t *bytes_transferred)
-{
-    RAMBlock *block = last_seen_block;
-    ram_addr_t offset = last_offset;
-    bool complete_round = false;
-    int pages = 0;
-    MemoryRegion *mr;
-
-    if (!block)
-        block = QLIST_FIRST_RCU(&ram_list.blocks);
-
-    while (true) {
-        mr = block->mr;
-        offset = migration_bitmap_find_and_reset_dirty(mr, offset);
-        if (complete_round && block == last_seen_block &&
-            offset >= last_offset) {
-            break;
-        }
-        if (offset >= block->used_length) {
-            offset = 0;
-            block = QLIST_NEXT_RCU(block, next);
-            if (!block) {
-                block = QLIST_FIRST_RCU(&ram_list.blocks);
-                complete_round = true;
-                ram_bulk_stage = false;
-                if (migrate_use_xbzrle()) {
-                    /* If xbzrle is on, stop using the data compression at this
-                     * point. In theory, xbzrle can do better than compression.
-                     */
-                    flush_compressed_data(f);
-                    compression_switch = false;
-                }
-            }
-        } else {
-            if (compression_switch && migrate_use_compression()) {
-                pages = ram_save_compressed_page(f, block, offset, last_stage,
-                                                 bytes_transferred);
-            } else {
-                pages = ram_save_page(f, block, offset, last_stage,
-                                      bytes_transferred);
-            }
-
-            /* if page is unmodified, continue to the next */
-            if (pages > 0) {
-                last_sent_block = block;
-                break;
-            }
-        }
-    }
-
-    last_seen_block = block;
-    last_offset = offset;
-
-    return pages;
-}
-
-void acct_update_position(QEMUFile *f, size_t size, bool zero)
-{
-    uint64_t pages = size / TARGET_PAGE_SIZE;
-    if (zero) {
-        acct_info.dup_pages += pages;
-    } else {
-        acct_info.norm_pages += pages;
-        bytes_transferred += size;
-        qemu_update_position(f, size);
-    }
-}
-
-static ram_addr_t ram_save_remaining(void)
-{
-    return migration_dirty_pages;
-}
-
-uint64_t ram_bytes_remaining(void)
-{
-    return ram_save_remaining() * TARGET_PAGE_SIZE;
-}
-
-uint64_t ram_bytes_transferred(void)
-{
-    return bytes_transferred;
-}
-
-uint64_t ram_bytes_total(void)
-{
-    RAMBlock *block;
-    uint64_t total = 0;
-
-    rcu_read_lock();
-    QLIST_FOREACH_RCU(block, &ram_list.blocks, next)
-        total += block->used_length;
-    rcu_read_unlock();
-    return total;
-}
-
-void free_xbzrle_decoded_buf(void)
-{
-    g_free(xbzrle_decoded_buf);
-    xbzrle_decoded_buf = NULL;
-}
-
-static void migration_end(void)
-{
-    if (migration_bitmap) {
-        memory_global_dirty_log_stop();
-        g_free(migration_bitmap);
-        migration_bitmap = NULL;
-    }
-
-    XBZRLE_cache_lock();
-    if (XBZRLE.cache) {
-        cache_fini(XBZRLE.cache);
-        g_free(XBZRLE.encoded_buf);
-        g_free(XBZRLE.current_buf);
-        XBZRLE.cache = NULL;
-        XBZRLE.encoded_buf = NULL;
-        XBZRLE.current_buf = NULL;
-    }
-    XBZRLE_cache_unlock();
-}
-
-static void ram_migration_cancel(void *opaque)
-{
-    migration_end();
-}
-
-static void reset_ram_globals(void)
-{
-    last_seen_block = NULL;
-    last_sent_block = NULL;
-    last_offset = 0;
-    last_version = ram_list.version;
-    ram_bulk_stage = true;
-}
-
-#define MAX_WAIT 50 /* ms, half buffered_file limit */
-
-
-/* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
- * long-running RCU critical section.  When rcu-reclaims in the code
- * start to become numerous it will be necessary to reduce the
- * granularity of these critical sections.
- */
-
-static int ram_save_setup(QEMUFile *f, void *opaque)
-{
-    RAMBlock *block;
-    int64_t ram_bitmap_pages; /* Size of bitmap in pages, including gaps */
-
-    mig_throttle_on = false;
-    dirty_rate_high_cnt = 0;
-    bitmap_sync_count = 0;
-    migration_bitmap_sync_init();
-
-    if (migrate_use_xbzrle()) {
-        XBZRLE_cache_lock();
-        XBZRLE.cache = cache_init(migrate_xbzrle_cache_size() /
-                                  TARGET_PAGE_SIZE,
-                                  TARGET_PAGE_SIZE);
-        if (!XBZRLE.cache) {
-            XBZRLE_cache_unlock();
-            error_report("Error creating cache");
-            return -1;
-        }
-        XBZRLE_cache_unlock();
-
-        /* We prefer not to abort if there is no memory */
-        XBZRLE.encoded_buf = g_try_malloc0(TARGET_PAGE_SIZE);
-        if (!XBZRLE.encoded_buf) {
-            error_report("Error allocating encoded_buf");
-            return -1;
-        }
-
-        XBZRLE.current_buf = g_try_malloc(TARGET_PAGE_SIZE);
-        if (!XBZRLE.current_buf) {
-            error_report("Error allocating current_buf");
-            g_free(XBZRLE.encoded_buf);
-            XBZRLE.encoded_buf = NULL;
-            return -1;
-        }
-
-        acct_clear();
-    }
-
-    /* iothread lock needed for ram_list.dirty_memory[] */
-    qemu_mutex_lock_iothread();
-    qemu_mutex_lock_ramlist();
-    rcu_read_lock();
-    bytes_transferred = 0;
-    reset_ram_globals();
-
-    ram_bitmap_pages = last_ram_offset() >> TARGET_PAGE_BITS;
-    migration_bitmap = bitmap_new(ram_bitmap_pages);
-    bitmap_set(migration_bitmap, 0, ram_bitmap_pages);
-
-    /*
-     * Count the total number of pages used by ram blocks not including any
-     * gaps due to alignment or unplugs.
-     */
-    migration_dirty_pages = ram_bytes_total() >> TARGET_PAGE_BITS;
-
-    memory_global_dirty_log_start();
-    migration_bitmap_sync();
-    qemu_mutex_unlock_ramlist();
-    qemu_mutex_unlock_iothread();
-
-    qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
-
-    QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
-        qemu_put_byte(f, strlen(block->idstr));
-        qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
-        qemu_put_be64(f, block->used_length);
-    }
-
-    rcu_read_unlock();
-
-    ram_control_before_iterate(f, RAM_CONTROL_SETUP);
-    ram_control_after_iterate(f, RAM_CONTROL_SETUP);
-
-    qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
-
-    return 0;
-}
-
-static int ram_save_iterate(QEMUFile *f, void *opaque)
-{
-    int ret;
-    int i;
-    int64_t t0;
-    int pages_sent = 0;
-
-    rcu_read_lock();
-    if (ram_list.version != last_version) {
-        reset_ram_globals();
-    }
-
-    /* Read version before ram_list.blocks */
-    smp_rmb();
-
-    ram_control_before_iterate(f, RAM_CONTROL_ROUND);
-
-    t0 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
-    i = 0;
-    while ((ret = qemu_file_rate_limit(f)) == 0) {
-        int pages;
-
-        pages = ram_find_and_save_block(f, false, &bytes_transferred);
-        /* no more pages to sent */
-        if (pages == 0) {
-            break;
-        }
-        pages_sent += pages;
-        acct_info.iterations++;
-        check_guest_throttling();
-        /* we want to check in the 1st loop, just in case it was the 1st time
-           and we had to sync the dirty bitmap.
-           qemu_get_clock_ns() is a bit expensive, so we only check each some
-           iterations
-        */
-        if ((i & 63) == 0) {
-            uint64_t t1 = (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - t0) / 1000000;
-            if (t1 > MAX_WAIT) {
-                DPRINTF("big wait: %" PRIu64 " milliseconds, %d iterations\n",
-                        t1, i);
-                break;
-            }
-        }
-        i++;
-    }
-    flush_compressed_data(f);
-    rcu_read_unlock();
-
-    /*
-     * Must occur before EOS (or any QEMUFile operation)
-     * because of RDMA protocol.
-     */
-    ram_control_after_iterate(f, RAM_CONTROL_ROUND);
-
-    qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
-    bytes_transferred += 8;
-
-    ret = qemu_file_get_error(f);
-    if (ret < 0) {
-        return ret;
-    }
-
-    return pages_sent;
-}
-
-/* Called with iothread lock */
-static int ram_save_complete(QEMUFile *f, void *opaque)
-{
-    rcu_read_lock();
-
-    migration_bitmap_sync();
-
-    ram_control_before_iterate(f, RAM_CONTROL_FINISH);
-
-    /* try transferring iterative blocks of memory */
-
-    /* flush all remaining blocks regardless of rate limiting */
-    while (true) {
-        int pages;
-
-        pages = ram_find_and_save_block(f, true, &bytes_transferred);
-        /* no more blocks to sent */
-        if (pages == 0) {
-            break;
-        }
-    }
-
-    flush_compressed_data(f);
-    ram_control_after_iterate(f, RAM_CONTROL_FINISH);
-    migration_end();
-
-    rcu_read_unlock();
-    qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
-
-    return 0;
-}
-
-static uint64_t ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size)
-{
-    uint64_t remaining_size;
-
-    remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
-
-    if (remaining_size < max_size) {
-        qemu_mutex_lock_iothread();
-        rcu_read_lock();
-        migration_bitmap_sync();
-        rcu_read_unlock();
-        qemu_mutex_unlock_iothread();
-        remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
-    }
-    return remaining_size;
-}
-
-static int load_xbzrle(QEMUFile *f, ram_addr_t addr, void *host)
-{
-    unsigned int xh_len;
-    int xh_flags;
-
-    if (!xbzrle_decoded_buf) {
-        xbzrle_decoded_buf = g_malloc(TARGET_PAGE_SIZE);
-    }
-
-    /* extract RLE header */
-    xh_flags = qemu_get_byte(f);
-    xh_len = qemu_get_be16(f);
-
-    if (xh_flags != ENCODING_FLAG_XBZRLE) {
-        error_report("Failed to load XBZRLE page - wrong compression!");
-        return -1;
-    }
-
-    if (xh_len > TARGET_PAGE_SIZE) {
-        error_report("Failed to load XBZRLE page - len overflow!");
-        return -1;
-    }
-    /* load data and decode */
-    qemu_get_buffer(f, xbzrle_decoded_buf, xh_len);
-
-    /* decode RLE */
-    if (xbzrle_decode_buffer(xbzrle_decoded_buf, xh_len, host,
-                             TARGET_PAGE_SIZE) == -1) {
-        error_report("Failed to load XBZRLE page - decode error!");
-        return -1;
-    }
-
-    return 0;
-}
-
-/* Must be called from within a rcu critical section.
- * Returns a pointer from within the RCU-protected ram_list.
- */
-static inline void *host_from_stream_offset(QEMUFile *f,
-                                            ram_addr_t offset,
-                                            int flags)
-{
-    static RAMBlock *block = NULL;
-    char id[256];
-    uint8_t len;
-
-    if (flags & RAM_SAVE_FLAG_CONTINUE) {
-        if (!block || block->max_length <= offset) {
-            error_report("Ack, bad migration stream!");
-            return NULL;
-        }
-
-        return memory_region_get_ram_ptr(block->mr) + offset;
-    }
-
-    len = qemu_get_byte(f);
-    qemu_get_buffer(f, (uint8_t *)id, len);
-    id[len] = 0;
-
-    QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
-        if (!strncmp(id, block->idstr, sizeof(id)) &&
-            block->max_length > offset) {
-            return memory_region_get_ram_ptr(block->mr) + offset;
-        }
-    }
-
-    error_report("Can't find block %s!", id);
-    return NULL;
-}
-
-/*
- * If a page (or a whole RDMA chunk) has been
- * determined to be zero, then zap it.
- */
-void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
-{
-    if (ch != 0 || !is_zero_range(host, size)) {
-        memset(host, ch, size);
-    }
-}
-
-static void *do_data_decompress(void *opaque)
-{
-    DecompressParam *param = opaque;
-    unsigned long pagesize;
-
-    while (!quit_decomp_thread) {
-        qemu_mutex_lock(&param->mutex);
-        while (!param->start && !quit_decomp_thread) {
-            qemu_cond_wait(&param->cond, &param->mutex);
-            pagesize = TARGET_PAGE_SIZE;
-            if (!quit_decomp_thread) {
-                /* uncompress() will return failed in some case, especially
-                 * when the page is dirted when doing the compression, it's
-                 * not a problem because the dirty page will be retransferred
-                 * and uncompress() won't break the data in other pages.
-                 */
-                uncompress((Bytef *)param->des, &pagesize,
-                           (const Bytef *)param->compbuf, param->len);
-            }
-            param->start = false;
-        }
-        qemu_mutex_unlock(&param->mutex);
-    }
-
-    return NULL;
-}
-
-void migrate_decompress_threads_create(void)
-{
-    int i, thread_count;
-
-    thread_count = migrate_decompress_threads();
-    decompress_threads = g_new0(QemuThread, thread_count);
-    decomp_param = g_new0(DecompressParam, thread_count);
-    compressed_data_buf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
-    quit_decomp_thread = false;
-    for (i = 0; i < thread_count; i++) {
-        qemu_mutex_init(&decomp_param[i].mutex);
-        qemu_cond_init(&decomp_param[i].cond);
-        decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
-        qemu_thread_create(decompress_threads + i, "decompress",
-                           do_data_decompress, decomp_param + i,
-                           QEMU_THREAD_JOINABLE);
-    }
-}
-
-void migrate_decompress_threads_join(void)
-{
-    int i, thread_count;
-
-    quit_decomp_thread = true;
-    thread_count = migrate_decompress_threads();
-    for (i = 0; i < thread_count; i++) {
-        qemu_mutex_lock(&decomp_param[i].mutex);
-        qemu_cond_signal(&decomp_param[i].cond);
-        qemu_mutex_unlock(&decomp_param[i].mutex);
-    }
-    for (i = 0; i < thread_count; i++) {
-        qemu_thread_join(decompress_threads + i);
-        qemu_mutex_destroy(&decomp_param[i].mutex);
-        qemu_cond_destroy(&decomp_param[i].cond);
-        g_free(decomp_param[i].compbuf);
-    }
-    g_free(decompress_threads);
-    g_free(decomp_param);
-    g_free(compressed_data_buf);
-    decompress_threads = NULL;
-    decomp_param = NULL;
-    compressed_data_buf = NULL;
-}
-
-static void decompress_data_with_multi_threads(uint8_t *compbuf,
-                                               void *host, int len)
-{
-    int idx, thread_count;
-
-    thread_count = migrate_decompress_threads();
-    while (true) {
-        for (idx = 0; idx < thread_count; idx++) {
-            if (!decomp_param[idx].start) {
-                memcpy(decomp_param[idx].compbuf, compbuf, len);
-                decomp_param[idx].des = host;
-                decomp_param[idx].len = len;
-                start_decompression(&decomp_param[idx]);
-                break;
-            }
-        }
-        if (idx < thread_count) {
-            break;
-        }
-    }
-}
-
-static int ram_load(QEMUFile *f, void *opaque, int version_id)
-{
-    int flags = 0, ret = 0;
-    static uint64_t seq_iter;
-    int len = 0;
-
-    seq_iter++;
-
-    if (version_id != 4) {
-        ret = -EINVAL;
-    }
-
-    /* This RCU critical section can be very long running.
-     * When RCU reclaims in the code start to become numerous,
-     * it will be necessary to reduce the granularity of this
-     * critical section.
-     */
-    rcu_read_lock();
-    while (!ret && !(flags & RAM_SAVE_FLAG_EOS)) {
-        ram_addr_t addr, total_ram_bytes;
-        void *host;
-        uint8_t ch;
-
-        addr = qemu_get_be64(f);
-        flags = addr & ~TARGET_PAGE_MASK;
-        addr &= TARGET_PAGE_MASK;
-
-        switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
-        case RAM_SAVE_FLAG_MEM_SIZE:
-            /* Synchronize RAM block list */
-            total_ram_bytes = addr;
-            while (!ret && total_ram_bytes) {
-                RAMBlock *block;
-                uint8_t len;
-                char id[256];
-                ram_addr_t length;
-
-                len = qemu_get_byte(f);
-                qemu_get_buffer(f, (uint8_t *)id, len);
-                id[len] = 0;
-                length = qemu_get_be64(f);
-
-                QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
-                    if (!strncmp(id, block->idstr, sizeof(id))) {
-                        if (length != block->used_length) {
-                            Error *local_err = NULL;
-
-                            ret = qemu_ram_resize(block->offset, length, &local_err);
-                            if (local_err) {
-                                error_report_err(local_err);
-                            }
-                        }
-                        break;
-                    }
-                }
-
-                if (!block) {
-                    error_report("Unknown ramblock \"%s\", cannot "
-                                 "accept migration", id);
-                    ret = -EINVAL;
-                }
-
-                total_ram_bytes -= length;
-            }
-            break;
-        case RAM_SAVE_FLAG_COMPRESS:
-            host = host_from_stream_offset(f, addr, flags);
-            if (!host) {
-                error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
-                ret = -EINVAL;
-                break;
-            }
-            ch = qemu_get_byte(f);
-            ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
-            break;
-        case RAM_SAVE_FLAG_PAGE:
-            host = host_from_stream_offset(f, addr, flags);
-            if (!host) {
-                error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
-                ret = -EINVAL;
-                break;
-            }
-            qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
-            break;
-        case RAM_SAVE_FLAG_COMPRESS_PAGE:
-            host = host_from_stream_offset(f, addr, flags);
-            if (!host) {
-                error_report("Invalid RAM offset " RAM_ADDR_FMT, addr);
-                ret = -EINVAL;
-                break;
-            }
-
-            len = qemu_get_be32(f);
-            if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
-                error_report("Invalid compressed data length: %d", len);
-                ret = -EINVAL;
-                break;
-            }
-            qemu_get_buffer(f, compressed_data_buf, len);
-            decompress_data_with_multi_threads(compressed_data_buf, host, len);
-            break;
-        case RAM_SAVE_FLAG_XBZRLE:
-            host = host_from_stream_offset(f, addr, flags);
-            if (!host) {
-                error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
-                ret = -EINVAL;
-                break;
-            }
-            if (load_xbzrle(f, addr, host) < 0) {
-                error_report("Failed to decompress XBZRLE page at "
-                             RAM_ADDR_FMT, addr);
-                ret = -EINVAL;
-                break;
-            }
-            break;
-        case RAM_SAVE_FLAG_EOS:
-            /* normal exit */
-            break;
-        default:
-            if (flags & RAM_SAVE_FLAG_HOOK) {
-                ram_control_load_hook(f, flags);
-            } else {
-                error_report("Unknown combination of migration flags: %#x",
-                             flags);
-                ret = -EINVAL;
-            }
-        }
-        if (!ret) {
-            ret = qemu_file_get_error(f);
-        }
-    }
-
-    rcu_read_unlock();
-    DPRINTF("Completed load of VM with exit code %d seq iteration "
-            "%" PRIu64 "\n", ret, seq_iter);
-    return ret;
-}
-
-static SaveVMHandlers savevm_ram_handlers = {
-    .save_live_setup = ram_save_setup,
-    .save_live_iterate = ram_save_iterate,
-    .save_live_complete = ram_save_complete,
-    .save_live_pending = ram_save_pending,
-    .load_state = ram_load,
-    .cancel = ram_migration_cancel,
-};
-
-void ram_mig_init(void)
-{
-    qemu_mutex_init(&XBZRLE.lock);
-    register_savevm_live(NULL, "ram", 0, 4, &savevm_ram_handlers, NULL);
-}
-
 struct soundhw {
     const char *name;
     const char *descr;
@@ -1869,52 +330,3 @@ TargetInfo *qmp_query_target(Error **errp)
 
     return info;
 }
-
-/* Stub function that's gets run on the vcpu when its brought out of the
-   VM to run inside qemu via async_run_on_cpu()*/
-static void mig_sleep_cpu(void *opq)
-{
-    qemu_mutex_unlock_iothread();
-    g_usleep(30*1000);
-    qemu_mutex_lock_iothread();
-}
-
-/* To reduce the dirty rate explicitly disallow the VCPUs from spending
-   much time in the VM. The migration thread will try to catchup.
-   Workload will experience a performance drop.
-*/
-static void mig_throttle_guest_down(void)
-{
-    CPUState *cpu;
-
-    qemu_mutex_lock_iothread();
-    CPU_FOREACH(cpu) {
-        async_run_on_cpu(cpu, mig_sleep_cpu, NULL);
-    }
-    qemu_mutex_unlock_iothread();
-}
-
-static void check_guest_throttling(void)
-{
-    static int64_t t0;
-    int64_t        t1;
-
-    if (!mig_throttle_on) {
-        return;
-    }
-
-    if (!t0)  {
-        t0 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
-        return;
-    }
-
-    t1 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
-
-    /* If it has been more than 40 ms since the last time the guest
-     * was throttled then do it again.
-     */
-    if (40 < (t1-t0)/1000000) {
-        mig_throttle_guest_down();
-        t0 = t1;
-    }
-}