docs: convert README, CODING_STYLE and HACKING to RST syntax

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

1 files changed, 0 insertions, 257 deletions

diff --git a/HACKING b/HACKING
deleted file mode 100644
index 097d482603..0000000000
--- a/HACKING
+++ /dev/null
@@ -1,257 +0,0 @@
-1. Preprocessor
-
-1.1. Variadic macros
-
-For variadic macros, stick with this C99-like syntax:
-
-#define DPRINTF(fmt, ...)                                       \
-    do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
-
-1.2. Include directives
-
-Order include directives as follows:
-
-#include "qemu/osdep.h"  /* Always first... */
-#include <...>           /* then system headers... */
-#include "..."           /* and finally QEMU headers. */
-
-The "qemu/osdep.h" header contains preprocessor macros that affect the behavior
-of core system headers like <stdint.h>.  It must be the first include so that
-core system headers included by external libraries get the preprocessor macros
-that QEMU depends on.
-
-Do not include "qemu/osdep.h" from header files since the .c file will have
-already included it.
-
-2. C types
-
-It should be common sense to use the right type, but we have collected
-a few useful guidelines here.
-
-2.1. Scalars
-
-If you're using "int" or "long", odds are good that there's a better type.
-If a variable is counting something, it should be declared with an
-unsigned type.
-
-If it's host memory-size related, size_t should be a good choice (use
-ssize_t only if required). Guest RAM memory offsets must use ram_addr_t,
-but only for RAM, it may not cover whole guest address space.
-
-If it's file-size related, use off_t.
-If it's file-offset related (i.e., signed), use off_t.
-If it's just counting small numbers use "unsigned int";
-(on all but oddball embedded systems, you can assume that that
-type is at least four bytes wide).
-
-In the event that you require a specific width, use a standard type
-like int32_t, uint32_t, uint64_t, etc.  The specific types are
-mandatory for VMState fields.
-
-Don't use Linux kernel internal types like u32, __u32 or __le32.
-
-Use hwaddr for guest physical addresses except pcibus_t
-for PCI addresses.  In addition, ram_addr_t is a QEMU internal address
-space that maps guest RAM physical addresses into an intermediate
-address space that can map to host virtual address spaces.  Generally
-speaking, the size of guest memory can always fit into ram_addr_t but
-it would not be correct to store an actual guest physical address in a
-ram_addr_t.
-
-For CPU virtual addresses there are several possible types.
-vaddr is the best type to use to hold a CPU virtual address in
-target-independent code. It is guaranteed to be large enough to hold a
-virtual address for any target, and it does not change size from target
-to target. It is always unsigned.
-target_ulong is a type the size of a virtual address on the CPU; this means
-it may be 32 or 64 bits depending on which target is being built. It should
-therefore be used only in target-specific code, and in some
-performance-critical built-per-target core code such as the TLB code.
-There is also a signed version, target_long.
-abi_ulong is for the *-user targets, and represents a type the size of
-'void *' in that target's ABI. (This may not be the same as the size of a
-full CPU virtual address in the case of target ABIs which use 32 bit pointers
-on 64 bit CPUs, like sparc32plus.) Definitions of structures that must match
-the target's ABI must use this type for anything that on the target is defined
-to be an 'unsigned long' or a pointer type.
-There is also a signed version, abi_long.
-
-Of course, take all of the above with a grain of salt.  If you're about
-to use some system interface that requires a type like size_t, pid_t or
-off_t, use matching types for any corresponding variables.
-
-Also, if you try to use e.g., "unsigned int" as a type, and that
-conflicts with the signedness of a related variable, sometimes
-it's best just to use the *wrong* type, if "pulling the thread"
-and fixing all related variables would be too invasive.
-
-Finally, while using descriptive types is important, be careful not to
-go overboard.  If whatever you're doing causes warnings, or requires
-casts, then reconsider or ask for help.
-
-2.2. Pointers
-
-Ensure that all of your pointers are "const-correct".
-Unless a pointer is used to modify the pointed-to storage,
-give it the "const" attribute.  That way, the reader knows
-up-front that this is a read-only pointer.  Perhaps more
-importantly, if we're diligent about this, when you see a non-const
-pointer, you're guaranteed that it is used to modify the storage
-it points to, or it is aliased to another pointer that is.
-
-2.3. Typedefs
-
-Typedefs are used to eliminate the redundant 'struct' keyword, since type
-names have a different style than other identifiers ("CamelCase" versus
-"snake_case").  Each named struct type should have a CamelCase name and a
-corresponding typedef.
-
-Since certain C compilers choke on duplicated typedefs, you should avoid
-them and declare a typedef only in one header file.  For common types,
-you can use "include/qemu/typedefs.h" for example.  However, as a matter
-of convenience it is also perfectly fine to use forward struct
-definitions instead of typedefs in headers and function prototypes; this
-avoids problems with duplicated typedefs and reduces the need to include
-headers from other headers.
-
-2.4. Reserved namespaces in C and POSIX
-Underscore capital, double underscore, and underscore 't' suffixes should be
-avoided.
-
-3. Low level memory management
-
-Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign
-APIs is not allowed in the QEMU codebase. Instead of these routines,
-use the GLib memory allocation routines g_malloc/g_malloc0/g_new/
-g_new0/g_realloc/g_free or QEMU's qemu_memalign/qemu_blockalign/qemu_vfree
-APIs.
-
-Please note that g_malloc will exit on allocation failure, so there
-is no need to test for failure (as you would have to with malloc).
-Calling g_malloc with a zero size is valid and will return NULL.
-
-Prefer g_new(T, n) instead of g_malloc(sizeof(T) * n) for the following
-reasons:
-
-  a. It catches multiplication overflowing size_t;
-  b. It returns T * instead of void *, letting compiler catch more type
-     errors.
-
-Declarations like T *v = g_malloc(sizeof(*v)) are acceptable, though.
-
-Memory allocated by qemu_memalign or qemu_blockalign must be freed with
-qemu_vfree, since breaking this will cause problems on Win32.
-
-4. String manipulation
-
-Do not use the strncpy function.  As mentioned in the man page, it does *not*
-guarantee a NULL-terminated buffer, which makes it extremely dangerous to use.
-It also zeros trailing destination bytes out to the specified length.  Instead,
-use this similar function when possible, but note its different signature:
-void pstrcpy(char *dest, int dest_buf_size, const char *src)
-
-Don't use strcat because it can't check for buffer overflows, but:
-char *pstrcat(char *buf, int buf_size, const char *s)
-
-The same limitation exists with sprintf and vsprintf, so use snprintf and
-vsnprintf.
-
-QEMU provides other useful string functions:
-int strstart(const char *str, const char *val, const char **ptr)
-int stristart(const char *str, const char *val, const char **ptr)
-int qemu_strnlen(const char *s, int max_len)
-
-There are also replacement character processing macros for isxyz and toxyz,
-so instead of e.g. isalnum you should use qemu_isalnum.
-
-Because of the memory management rules, you must use g_strdup/g_strndup
-instead of plain strdup/strndup.
-
-5. Printf-style functions
-
-Whenever you add a new printf-style function, i.e., one with a format
-string argument and following "..." in its prototype, be sure to use
-gcc's printf attribute directive in the prototype.
-
-This makes it so gcc's -Wformat and -Wformat-security options can do
-their jobs and cross-check format strings with the number and types
-of arguments.
-
-6. C standard, implementation defined and undefined behaviors
-
-C code in QEMU should be written to the C99 language specification. A copy
-of the final version of the C99 standard with corrigenda TC1, TC2, and TC3
-included, formatted as a draft, can be downloaded from:
- http://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf
-
-The C language specification defines regions of undefined behavior and
-implementation defined behavior (to give compiler authors enough leeway to
-produce better code).  In general, code in QEMU should follow the language
-specification and avoid both undefined and implementation defined
-constructs. ("It works fine on the gcc I tested it with" is not a valid
-argument...) However there are a few areas where we allow ourselves to
-assume certain behaviors because in practice all the platforms we care about
-behave in the same way and writing strictly conformant code would be
-painful. These are:
- * you may assume that integers are 2s complement representation
- * you may assume that right shift of a signed integer duplicates
-   the sign bit (ie it is an arithmetic shift, not a logical shift)
-
-In addition, QEMU assumes that the compiler does not use the latitude
-given in C99 and C11 to treat aspects of signed '<<' as undefined, as
-documented in the GNU Compiler Collection manual starting at version 4.0.
-
-7. Error handling and reporting
-
-7.1 Reporting errors to the human user
-
-Do not use printf(), fprintf() or monitor_printf().  Instead, use
-error_report() or error_vreport() from error-report.h.  This ensures the
-error is reported in the right place (current monitor or stderr), and in
-a uniform format.
-
-Use error_printf() & friends to print additional information.
-
-error_report() prints the current location.  In certain common cases
-like command line parsing, the current location is tracked
-automatically.  To manipulate it manually, use the loc_*() from
-error-report.h.
-
-7.2 Propagating errors
-
-An error can't always be reported to the user right where it's detected,
-but often needs to be propagated up the call chain to a place that can
-handle it.  This can be done in various ways.
-
-The most flexible one is Error objects.  See error.h for usage
-information.
-
-Use the simplest suitable method to communicate success / failure to
-callers.  Stick to common methods: non-negative on success / -1 on
-error, non-negative / -errno, non-null / null, or Error objects.
-
-Example: when a function returns a non-null pointer on success, and it
-can fail only in one way (as far as the caller is concerned), returning
-null on failure is just fine, and certainly simpler and a lot easier on
-the eyes than propagating an Error object through an Error ** parameter.
-
-Example: when a function's callers need to report details on failure
-only the function really knows, use Error **, and set suitable errors.
-
-Do not report an error to the user when you're also returning an error
-for somebody else to handle.  Leave the reporting to the place that
-consumes the error returned.
-
-7.3 Handling errors
-
-Calling exit() is fine when handling configuration errors during
-startup.  It's problematic during normal operation.  In particular,
-monitor commands should never exit().
-
-Do not call exit() or abort() to handle an error that can be triggered
-by the guest (e.g., some unimplemented corner case in guest code
-translation or device emulation).  Guests should not be able to
-terminate QEMU.
-
-Note that &error_fatal is just another way to exit(1), and &error_abort
-is just another way to abort().