raspi: add BCM2835 SOC MPHI emulation

Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

5 files changed, 255 insertions, 0 deletions

diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index f1bcc14f55..b3e0495040 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -125,6 +125,10 @@ static void bcm2835_peripherals_init(Object *obj)
                                    OBJECT(&s->sdhci.sdbus));
     object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost",
                                    OBJECT(&s->sdhost.sdbus));
+
+    /* Mphi */
+    sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi),
+                          TYPE_BCM2835_MPHI);
 }
 
 static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
@@ -360,6 +364,19 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
 
     object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
 
+    /* Mphi */
+    object_property_set_bool(OBJECT(&s->mphi), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    memory_region_add_subregion(&s->peri_mr, MPHI_OFFSET,
+                sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mphi), 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->mphi), 0,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_HOSTPORT));
+
     create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40);
     create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
     create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000);
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index b25181b711..60a9d80b74 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -56,6 +56,7 @@ common-obj-$(CONFIG_OMAP) += omap_l4.o
 common-obj-$(CONFIG_OMAP) += omap_sdrc.o
 common-obj-$(CONFIG_OMAP) += omap_tap.o
 common-obj-$(CONFIG_RASPI) += bcm2835_mbox.o
+common-obj-$(CONFIG_RASPI) += bcm2835_mphi.o
 common-obj-$(CONFIG_RASPI) += bcm2835_property.o
 common-obj-$(CONFIG_RASPI) += bcm2835_rng.o
 common-obj-$(CONFIG_RASPI) += bcm2835_thermal.o
diff --git a/hw/misc/bcm2835_mphi.c b/hw/misc/bcm2835_mphi.c
new file mode 100644
index 0000000000..0428e10ba5
--- /dev/null
+++ b/hw/misc/bcm2835_mphi.c
@@ -0,0 +1,191 @@
+/*
+ * BCM2835 SOC MPHI emulation
+ *
+ * Very basic emulation, only providing the FIQ interrupt needed to
+ * allow the dwc-otg USB host controller driver in the Raspbian kernel
+ * to function.
+ *
+ * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/misc/bcm2835_mphi.h"
+#include "migration/vmstate.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/main-loop.h"
+
+static inline void mphi_raise_irq(BCM2835MphiState *s)
+{
+    qemu_set_irq(s->irq, 1);
+}
+
+static inline void mphi_lower_irq(BCM2835MphiState *s)
+{
+    qemu_set_irq(s->irq, 0);
+}
+
+static uint64_t mphi_reg_read(void *ptr, hwaddr addr, unsigned size)
+{
+    BCM2835MphiState *s = ptr;
+    uint32_t val = 0;
+
+    switch (addr) {
+    case 0x28:  /* outdda */
+        val = s->outdda;
+        break;
+    case 0x2c:  /* outddb */
+        val = s->outddb;
+        break;
+    case 0x4c:  /* ctrl */
+        val = s->ctrl;
+        val |= 1 << 17;
+        break;
+    case 0x50:  /* intstat */
+        val = s->intstat;
+        break;
+    case 0x1f0: /* swirq_set */
+        val = s->swirq;
+        break;
+    case 0x1f4: /* swirq_clr */
+        val = s->swirq;
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "read from unknown register");
+        break;
+    }
+
+    return val;
+}
+
+static void mphi_reg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size)
+{
+    BCM2835MphiState *s = ptr;
+    int do_irq = 0;
+
+    switch (addr) {
+    case 0x28:  /* outdda */
+        s->outdda = val;
+        break;
+    case 0x2c:  /* outddb */
+        s->outddb = val;
+        if (val & (1 << 29)) {
+            do_irq = 1;
+        }
+        break;
+    case 0x4c:  /* ctrl */
+        s->ctrl = val;
+        if (val & (1 << 16)) {
+            do_irq = -1;
+        }
+        break;
+    case 0x50:  /* intstat */
+        s->intstat = val;
+        if (val & ((1 << 16) | (1 << 29))) {
+            do_irq = -1;
+        }
+        break;
+    case 0x1f0: /* swirq_set */
+        s->swirq |= val;
+        do_irq = 1;
+        break;
+    case 0x1f4: /* swirq_clr */
+        s->swirq &= ~val;
+        do_irq = -1;
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "write to unknown register");
+        return;
+    }
+
+    if (do_irq > 0) {
+        mphi_raise_irq(s);
+    } else if (do_irq < 0) {
+        mphi_lower_irq(s);
+    }
+}
+
+static const MemoryRegionOps mphi_mmio_ops = {
+    .read = mphi_reg_read,
+    .write = mphi_reg_write,
+    .impl.min_access_size = 4,
+    .impl.max_access_size = 4,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void mphi_reset(DeviceState *dev)
+{
+    BCM2835MphiState *s = BCM2835_MPHI(dev);
+
+    s->outdda = 0;
+    s->outddb = 0;
+    s->ctrl = 0;
+    s->intstat = 0;
+    s->swirq = 0;
+}
+
+static void mphi_realize(DeviceState *dev, Error **errp)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    BCM2835MphiState *s = BCM2835_MPHI(dev);
+
+    sysbus_init_irq(sbd, &s->irq);
+}
+
+static void mphi_init(Object *obj)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    BCM2835MphiState *s = BCM2835_MPHI(obj);
+
+    memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE);
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+const VMStateDescription vmstate_mphi_state = {
+    .name = "mphi",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(outdda, BCM2835MphiState),
+        VMSTATE_UINT32(outddb, BCM2835MphiState),
+        VMSTATE_UINT32(ctrl, BCM2835MphiState),
+        VMSTATE_UINT32(intstat, BCM2835MphiState),
+        VMSTATE_UINT32(swirq, BCM2835MphiState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void mphi_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = mphi_realize;
+    dc->reset = mphi_reset;
+    dc->vmsd = &vmstate_mphi_state;
+}
+
+static const TypeInfo bcm2835_mphi_type_info = {
+    .name          = TYPE_BCM2835_MPHI,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(BCM2835MphiState),
+    .instance_init = mphi_init,
+    .class_init    = mphi_class_init,
+};
+
+static void bcm2835_mphi_register_types(void)
+{
+    type_register_static(&bcm2835_mphi_type_info);
+}
+
+type_init(bcm2835_mphi_register_types)
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index 2e8655a7c2..7a7a8f6141 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -21,6 +21,7 @@
 #include "hw/misc/bcm2835_property.h"
 #include "hw/misc/bcm2835_rng.h"
 #include "hw/misc/bcm2835_mbox.h"
+#include "hw/misc/bcm2835_mphi.h"
 #include "hw/misc/bcm2835_thermal.h"
 #include "hw/sd/sdhci.h"
 #include "hw/sd/bcm2835_sdhost.h"
@@ -42,6 +43,7 @@ typedef struct BCM2835PeripheralState {
     qemu_irq irq, fiq;
 
     BCM2835SystemTimerState systmr;
+    BCM2835MphiState mphi;
     UnimplementedDeviceState armtmr;
     UnimplementedDeviceState cprman;
     UnimplementedDeviceState a2w;
diff --git a/include/hw/misc/bcm2835_mphi.h b/include/hw/misc/bcm2835_mphi.h
new file mode 100644
index 0000000000..e084314d0f
--- /dev/null
+++ b/include/hw/misc/bcm2835_mphi.h
@@ -0,0 +1,44 @@
+/*
+ * BCM2835 SOC MPHI state definitions
+ *
+ * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef HW_MISC_BCM2835_MPHI_H
+#define HW_MISC_BCM2835_MPHI_H
+
+#include "hw/irq.h"
+#include "hw/sysbus.h"
+
+#define MPHI_MMIO_SIZE      0x1000
+
+typedef struct BCM2835MphiState BCM2835MphiState;
+
+struct BCM2835MphiState {
+    SysBusDevice parent_obj;
+    qemu_irq irq;
+    MemoryRegion iomem;
+
+    uint32_t outdda;
+    uint32_t outddb;
+    uint32_t ctrl;
+    uint32_t intstat;
+    uint32_t swirq;
+};
+
+#define TYPE_BCM2835_MPHI   "bcm2835-mphi"
+
+#define BCM2835_MPHI(obj) \
+    OBJECT_CHECK(BCM2835MphiState, (obj), TYPE_BCM2835_MPHI)
+
+#endif