aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndrew Baumann <Andrew.Baumann@microsoft.com>2016-03-04 11:30:18 +0000
committerPeter Maydell <peter.maydell@linaro.org>2016-03-04 11:30:18 +0000
commiteab713941ab83c6d30739e430357e817bf81dad1 (patch)
treecce06d5a80235bca5be00a8b8cbccc0ee8c80409
parent4824a61a6dc1ce768be5c0a81f16224618104a63 (diff)
bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses
PMM pointed out that ldl_phys and stl_phys are dependent on the CPU's endianness, whereas device model code should be independent of it. This changes the relevant Raspberry Pi devices to explicitly call the little-endian variants. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456880233-22568-1-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-rw-r--r--hw/misc/bcm2835_mbox.c6
-rw-r--r--hw/misc/bcm2835_property.c38
2 files changed, 22 insertions, 22 deletions
diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c
index 500baba7c0..106585a7bf 100644
--- a/hw/misc/bcm2835_mbox.c
+++ b/hw/misc/bcm2835_mbox.c
@@ -98,7 +98,7 @@ static void bcm2835_mbox_update(BCM2835MboxState *s)
*/
for (n = 0; n < MBOX_CHAN_COUNT; n++) {
while (s->available[n] && !(s->mbox[0].status & ARM_MS_FULL)) {
- value = ldl_phys(&s->mbox_as, n << MBOX_AS_CHAN_SHIFT);
+ value = ldl_le_phys(&s->mbox_as, n << MBOX_AS_CHAN_SHIFT);
assert(value != MBOX_INVALID_DATA); /* Pending interrupt but no data */
mbox_push(&s->mbox[0], value);
}
@@ -207,12 +207,12 @@ static void bcm2835_mbox_write(void *opaque, hwaddr offset,
ch = value & 0xf;
if (ch < MBOX_CHAN_COUNT) {
childaddr = ch << MBOX_AS_CHAN_SHIFT;
- if (ldl_phys(&s->mbox_as, childaddr + MBOX_AS_PENDING)) {
+ if (ldl_le_phys(&s->mbox_as, childaddr + MBOX_AS_PENDING)) {
/* Child busy, push delayed. Push it in the arm->vc mbox */
mbox_push(&s->mbox[1], value);
} else {
/* Push it directly to the child device */
- stl_phys(&s->mbox_as, childaddr, value);
+ stl_le_phys(&s->mbox_as, childaddr, value);
}
} else {
/* Invalid channel number */
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 581922abd7..41fbbe3e7f 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -22,20 +22,20 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
s->addr = value;
- tot_len = ldl_phys(&s->dma_as, value);
+ tot_len = ldl_le_phys(&s->dma_as, value);
/* @(addr + 4) : Buffer response code */
value = s->addr + 8;
while (value + 8 <= s->addr + tot_len) {
- tag = ldl_phys(&s->dma_as, value);
- bufsize = ldl_phys(&s->dma_as, value + 4);
+ tag = ldl_le_phys(&s->dma_as, value);
+ bufsize = ldl_le_phys(&s->dma_as, value + 4);
/* @(value + 8) : Request/response indicator */
resplen = 0;
switch (tag) {
case 0x00000000: /* End tag */
break;
case 0x00000001: /* Get firmware revision */
- stl_phys(&s->dma_as, value + 12, 346337);
+ stl_le_phys(&s->dma_as, value + 12, 346337);
resplen = 4;
break;
case 0x00010001: /* Get board model */
@@ -44,7 +44,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
resplen = 4;
break;
case 0x00010002: /* Get board revision */
- stl_phys(&s->dma_as, value + 12, s->board_rev);
+ stl_le_phys(&s->dma_as, value + 12, s->board_rev);
resplen = 4;
break;
case 0x00010003: /* Get board MAC address */
@@ -58,24 +58,24 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
break;
case 0x00010005: /* Get ARM memory */
/* base */
- stl_phys(&s->dma_as, value + 12, 0);
+ stl_le_phys(&s->dma_as, value + 12, 0);
/* size */
- stl_phys(&s->dma_as, value + 16, s->ram_size);
+ stl_le_phys(&s->dma_as, value + 16, s->ram_size);
resplen = 8;
break;
case 0x00028001: /* Set power state */
/* Assume that whatever device they asked for exists,
* and we'll just claim we set it to the desired state
*/
- tmp = ldl_phys(&s->dma_as, value + 16);
- stl_phys(&s->dma_as, value + 16, (tmp & 1));
+ tmp = ldl_le_phys(&s->dma_as, value + 16);
+ stl_le_phys(&s->dma_as, value + 16, (tmp & 1));
resplen = 8;
break;
/* Clocks */
case 0x00030001: /* Get clock state */
- stl_phys(&s->dma_as, value + 16, 0x1);
+ stl_le_phys(&s->dma_as, value + 16, 0x1);
resplen = 8;
break;
@@ -88,15 +88,15 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
case 0x00030002: /* Get clock rate */
case 0x00030004: /* Get max clock rate */
case 0x00030007: /* Get min clock rate */
- switch (ldl_phys(&s->dma_as, value + 12)) {
+ switch (ldl_le_phys(&s->dma_as, value + 12)) {
case 1: /* EMMC */
- stl_phys(&s->dma_as, value + 16, 50000000);
+ stl_le_phys(&s->dma_as, value + 16, 50000000);
break;
case 2: /* UART */
- stl_phys(&s->dma_as, value + 16, 3000000);
+ stl_le_phys(&s->dma_as, value + 16, 3000000);
break;
default:
- stl_phys(&s->dma_as, value + 16, 700000000);
+ stl_le_phys(&s->dma_as, value + 16, 700000000);
break;
}
resplen = 8;
@@ -113,19 +113,19 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
/* Temperature */
case 0x00030006: /* Get temperature */
- stl_phys(&s->dma_as, value + 16, 25000);
+ stl_le_phys(&s->dma_as, value + 16, 25000);
resplen = 8;
break;
case 0x0003000A: /* Get max temperature */
- stl_phys(&s->dma_as, value + 16, 99000);
+ stl_le_phys(&s->dma_as, value + 16, 99000);
resplen = 8;
break;
case 0x00060001: /* Get DMA channels */
/* channels 2-5 */
- stl_phys(&s->dma_as, value + 12, 0x003C);
+ stl_le_phys(&s->dma_as, value + 12, 0x003C);
resplen = 4;
break;
@@ -143,12 +143,12 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
break;
}
- stl_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
+ stl_le_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
value += bufsize + 12;
}
/* Buffer response code */
- stl_phys(&s->dma_as, s->addr + 4, (1 << 31));
+ stl_le_phys(&s->dma_as, s->addr + 4, (1 << 31));
}
static uint64_t bcm2835_property_read(void *opaque, hwaddr offset,