hw/mips/jazz: Fix implicit creation of "-drive if=scsi" devices

The global hack for creating SCSI devices has recently been removed,
but this apparently broke SCSI devices on some boards that were not
ready for this change yet. For the pica61 machine you now get:

$ mips64-softmmu/qemu-system-mips64 -M pica61 -cdrom x.iso
qemu-system-mips64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2

Fix it by calling scsi_bus_legacy_handle_cmdline() after creating the
corresponding SCSI controller.

Fixes: 1454509726719e0933c800fad00d6999752688ea
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1520414644-11535-1-git-send-email-thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

3 files changed, 16 insertions, 13 deletions

diff --git a/hw/mips/mips_jazz.c b/hw/mips/mips_jazz.c
index 08e6f620fc..e135385265 100644
--- a/hw/mips/mips_jazz.c
+++ b/hw/mips/mips_jazz.c
@@ -146,6 +146,7 @@ static void mips_jazz_init(MachineState *machine,
     MemoryRegion *ram = g_new(MemoryRegion, 1);
     MemoryRegion *bios = g_new(MemoryRegion, 1);
     MemoryRegion *bios2 = g_new(MemoryRegion, 1);
+    ESPState *esp;
 
     /* init CPUs */
     cpu = MIPS_CPU(cpu_create(machine->cpu_type));
@@ -277,9 +278,9 @@ static void mips_jazz_init(MachineState *machine,
     }
 
     /* SCSI adapter */
-    esp_init(0x80002000, 0,
-             rc4030_dma_read, rc4030_dma_write, dmas[0],
-             qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);
+    esp = esp_init(0x80002000, 0, rc4030_dma_read, rc4030_dma_write, dmas[0],
+                   qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);
+    scsi_bus_legacy_handle_cmdline(&esp->bus);
 
     /* Floppy */
     for (n = 0; n < MAX_FD; n++) {
diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 45975c21e8..64ec285826 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -618,11 +618,11 @@ static const MemoryRegionOps sysbus_esp_mem_ops = {
     .valid.accepts = esp_mem_accepts,
 };
 
-void esp_init(hwaddr espaddr, int it_shift,
-              ESPDMAMemoryReadWriteFunc dma_memory_read,
-              ESPDMAMemoryReadWriteFunc dma_memory_write,
-              void *dma_opaque, qemu_irq irq, qemu_irq *reset,
-              qemu_irq *dma_enable)
+ESPState *esp_init(hwaddr espaddr, int it_shift,
+                   ESPDMAMemoryReadWriteFunc dma_memory_read,
+                   ESPDMAMemoryReadWriteFunc dma_memory_write,
+                   void *dma_opaque, qemu_irq irq, qemu_irq *reset,
+                   qemu_irq *dma_enable)
 {
     DeviceState *dev;
     SysBusDevice *s;
@@ -644,6 +644,8 @@ void esp_init(hwaddr espaddr, int it_shift,
     sysbus_mmio_map(s, 0, espaddr);
     *reset = qdev_get_gpio_in(dev, 0);
     *dma_enable = qdev_get_gpio_in(dev, 1);
+
+    return esp;
 }
 
 static const struct SCSIBusInfo esp_scsi_info = {
diff --git a/include/hw/scsi/esp.h b/include/hw/scsi/esp.h
index 3b160f858c..93fdaced67 100644
--- a/include/hw/scsi/esp.h
+++ b/include/hw/scsi/esp.h
@@ -7,11 +7,6 @@
 /* esp.c */
 #define ESP_MAX_DEVS 7
 typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len);
-void esp_init(hwaddr espaddr, int it_shift,
-              ESPDMAMemoryReadWriteFunc dma_memory_read,
-              ESPDMAMemoryReadWriteFunc dma_memory_write,
-              void *dma_opaque, qemu_irq irq, qemu_irq *reset,
-              qemu_irq *dma_enable);
 
 #define ESP_REGS 16
 #define TI_BUFSZ 16
@@ -136,6 +131,11 @@ typedef struct {
 #define TCHI_FAS100A 0x4
 #define TCHI_AM53C974 0x12
 
+ESPState *esp_init(hwaddr espaddr, int it_shift,
+                   ESPDMAMemoryReadWriteFunc dma_memory_read,
+                   ESPDMAMemoryReadWriteFunc dma_memory_write,
+                   void *dma_opaque, qemu_irq irq, qemu_irq *reset,
+                   qemu_irq *dma_enable);
 void esp_dma_enable(ESPState *s, int irq, int level);
 void esp_request_cancelled(SCSIRequest *req);
 void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid);