Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging

hppa power button support, graphics updates and firmware fixes

# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg:                using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg:                 aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D  25F8 3E5F 3D04 A7A2 4603
#      Subkey fingerprint: BCE9 123E 1AD2 9F07 C049  BBDE F712 B510 A23A 0F5F

* remotes/hdeller/tags/target-hppa-pull-request:
  hw/display/artist: Allow screen size up to 2048 lines
  hw/display/artist: Refactor x/y coordination extraction
  hw/display/artist: Verify artist screen resolution
  target/hppa: Fix boot with old Linux installation CDs
  hw/hppa: Add power button emulation
  hw/hppa: Tell SeaBIOS port address of fw_cfg
  hw/hppa: Change fw_cfg port address
  hw/hppa: Store boot device in fw_cfg section
  hw/hppa: Make number of TLB and BTLB entries configurable
  seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

7 files changed, 94 insertions, 23 deletions

diff --git a/hw/display/artist.c b/hw/display/artist.c
index 71982559c6..955296d3d8 100644
--- a/hw/display/artist.c
+++ b/hw/display/artist.c
@@ -192,6 +192,10 @@ static const char *artist_reg_name(uint64_t addr)
 }
 #undef REG_NAME
 
+/* artist has a fixed line length of 2048 bytes. */
+#define ADDR_TO_Y(addr) extract32(addr, 11, 11)
+#define ADDR_TO_X(addr) extract32(addr, 0, 11)
+
 static int16_t artist_get_x(uint32_t reg)
 {
     return reg >> 16;
@@ -348,13 +352,13 @@ static void artist_invalidate_cursor(ARTISTState *s)
                             y, s->cursor_height);
 }
 
-static void vram_bit_write(ARTISTState *s, int posx, int posy, bool incr_x,
+static void vram_bit_write(ARTISTState *s, int posy, bool incr_x,
                            int size, uint32_t data)
 {
     struct vram_buffer *buf;
     uint32_t vram_bitmask = s->vram_bitmask;
     int mask, i, pix_count, pix_length;
-    unsigned int offset, width;
+    unsigned int posx, offset, width;
     uint8_t *data8, *p;
 
     pix_count = vram_write_pix_per_transfer(s);
@@ -366,6 +370,8 @@ static void vram_bit_write(ARTISTState *s, int posx, int posy, bool incr_x,
     if (s->cmap_bm_access) {
         offset = s->vram_pos;
     } else {
+        posx = ADDR_TO_X(s->vram_pos >> 2);
+        posy += ADDR_TO_Y(s->vram_pos >> 2);
         offset = posy * width + posx;
     }
 
@@ -858,7 +864,6 @@ static void artist_reg_write(void *opaque, hwaddr addr, uint64_t val,
                              unsigned size)
 {
     ARTISTState *s = opaque;
-    int posx, posy;
     int width, height;
 
     trace_artist_reg_write(size, addr, artist_reg_name(addr & ~3ULL), val);
@@ -881,16 +886,12 @@ static void artist_reg_write(void *opaque, hwaddr addr, uint64_t val,
         break;
 
     case VRAM_WRITE_INCR_Y:
-        posx = (s->vram_pos >> 2) & 0x7ff;
-        posy = (s->vram_pos >> 13) & 0x3ff;
-        vram_bit_write(s, posx, posy + s->vram_char_y++, false, size, val);
+        vram_bit_write(s, s->vram_char_y++, false, size, val);
         break;
 
     case VRAM_WRITE_INCR_X:
     case VRAM_WRITE_INCR_X2:
-        posx = (s->vram_pos >> 2) & 0x7ff;
-        posy = (s->vram_pos >> 13) & 0x3ff;
-        vram_bit_write(s, posx, posy + s->vram_char_y, true, size, val);
+        vram_bit_write(s, s->vram_char_y, true, size, val);
         break;
 
     case VRAM_IDX:
@@ -1156,8 +1157,7 @@ static void artist_vram_write(void *opaque, hwaddr addr, uint64_t val,
 {
     ARTISTState *s = opaque;
     struct vram_buffer *buf;
-    int posy = (addr >> 11) & 0x3ff;
-    int posx = addr & 0x7ff;
+    unsigned int posy, posx;
     unsigned int offset;
     trace_artist_vram_write(size, addr, val);
 
@@ -1170,6 +1170,9 @@ static void artist_vram_write(void *opaque, hwaddr addr, uint64_t val,
     }
 
     buf = vram_write_buffer(s);
+    posy = ADDR_TO_Y(addr);
+    posx = ADDR_TO_X(addr);
+
     if (!buf->size) {
         return;
     }
@@ -1212,7 +1215,7 @@ static uint64_t artist_vram_read(void *opaque, hwaddr addr, unsigned size)
     ARTISTState *s = opaque;
     struct vram_buffer *buf;
     uint64_t val;
-    int posy, posx;
+    unsigned int posy, posx;
 
     if (s->cmap_bm_access) {
         buf = &s->vram_buffer[ARTIST_BUFFER_CMAP];
@@ -1229,8 +1232,8 @@ static uint64_t artist_vram_read(void *opaque, hwaddr addr, unsigned size)
         return 0;
     }
 
-    posy = (addr >> 13) & 0x3ff;
-    posx = (addr >> 2) & 0x7ff;
+    posy = ADDR_TO_Y(addr);
+    posx = ADDR_TO_X(addr);
 
     if (posy > buf->height || posx > buf->width) {
         return 0;
@@ -1374,6 +1377,18 @@ static void artist_realizefn(DeviceState *dev, Error **errp)
     struct vram_buffer *buf;
     hwaddr offset = 0;
 
+    if (s->width > 2048 || s->height > 2048) {
+        error_report("artist: screen size can not exceed 2048 x 2048 pixel.");
+        s->width = MIN(s->width, 2048);
+        s->height = MIN(s->height, 2048);
+    }
+
+    if (s->width < 640 || s->height < 480) {
+        error_report("artist: minimum screen size is 640 x 480 pixel.");
+        s->width = MAX(s->width, 640);
+        s->height = MAX(s->height, 480);
+    }
+
     memory_region_init(&s->mem_as_root, OBJECT(dev), "artist", ~0ull);
     address_space_init(&s->as, &s->mem_as_root, "artist");
 
diff --git a/hw/hppa/hppa_hardware.h b/hw/hppa/hppa_hardware.h
index cdb7fa6240..bc258895c9 100644
--- a/hw/hppa/hppa_hardware.h
+++ b/hw/hppa/hppa_hardware.h
@@ -38,8 +38,7 @@
 #define PORT_PCI_CMD    (PCI_HPA + DINO_PCI_ADDR)
 #define PORT_PCI_DATA   (PCI_HPA + DINO_CONFIG_DATA)
 
-/* QEMU fw_cfg interface port */
-#define QEMU_FW_CFG_IO_BASE     (MEMORY_HPA + 0x80)
+#define FW_CFG_IO_BASE  0xfffa0000
 
 #define PORT_SERIAL1    (DINO_UART_HPA + 0x800)
 #define PORT_SERIAL2    (LASI_UART_HPA + 0x800)
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 90aeefe2a4..d5164457ee 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -12,6 +12,7 @@
 #include "qemu/error-report.h"
 #include "sysemu/reset.h"
 #include "sysemu/sysemu.h"
+#include "sysemu/runstate.h"
 #include "hw/rtc/mc146818rtc.h"
 #include "hw/timer/i8254.h"
 #include "hw/char/serial.h"
@@ -27,6 +28,30 @@
 
 #define MIN_SEABIOS_HPPA_VERSION 1 /* require at least this fw version */
 
+#define HPA_POWER_BUTTON (FIRMWARE_END - 0x10)
+
+static void hppa_powerdown_req(Notifier *n, void *opaque)
+{
+    hwaddr soft_power_reg = HPA_POWER_BUTTON;
+    uint32_t val;
+
+    val = ldl_be_phys(&address_space_memory, soft_power_reg);
+    if ((val >> 8) == 0) {
+        /* immediately shut down when under hardware control */
+        qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+        return;
+    }
+
+    /* clear bit 31 to indicate that the power switch was pressed. */
+    val &= ~1;
+    stl_be_phys(&address_space_memory, soft_power_reg, val);
+}
+
+static Notifier hppa_system_powerdown_notifier = {
+    .notify = hppa_powerdown_req
+};
+
+
 static ISABus *hppa_isa_bus(void)
 {
     ISABus *isa_bus;
@@ -58,12 +83,18 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)
 static HPPACPU *cpu[HPPA_MAX_CPUS];
 static uint64_t firmware_entry;
 
+static void fw_cfg_boot_set(void *opaque, const char *boot_device,
+                            Error **errp)
+{
+    fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
+}
+
 static FWCfgState *create_fw_cfg(MachineState *ms)
 {
     FWCfgState *fw_cfg;
     uint64_t val;
 
-    fw_cfg = fw_cfg_init_mem(QEMU_FW_CFG_IO_BASE, QEMU_FW_CFG_IO_BASE + 4);
+    fw_cfg = fw_cfg_init_mem(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4);
     fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, ms->smp.cpus);
     fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, HPPA_MAX_CPUS);
     fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, ram_size);
@@ -72,6 +103,21 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
     fw_cfg_add_file(fw_cfg, "/etc/firmware-min-version",
                     g_memdup(&val, sizeof(val)), sizeof(val));
 
+    val = cpu_to_le64(HPPA_TLB_ENTRIES);
+    fw_cfg_add_file(fw_cfg, "/etc/cpu/tlb_entries",
+                    g_memdup(&val, sizeof(val)), sizeof(val));
+
+    val = cpu_to_le64(HPPA_BTLB_ENTRIES);
+    fw_cfg_add_file(fw_cfg, "/etc/cpu/btlb_entries",
+                    g_memdup(&val, sizeof(val)), sizeof(val));
+
+    val = cpu_to_le64(HPA_POWER_BUTTON);
+    fw_cfg_add_file(fw_cfg, "/etc/power-button-addr",
+                    g_memdup(&val, sizeof(val)), sizeof(val));
+
+    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ms->boot_order[0]);
+    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
+
     return fw_cfg;
 }
 
@@ -160,6 +206,9 @@ static void machine_hppa_init(MachineState *machine)
         }
     }
 
+    /* register power switch emulation */
+    qemu_register_powerdown_notifier(&hppa_system_powerdown_notifier);
+
     /* Load firmware.  Given that this is not "real" firmware,
        but one explicitly written for the emulation, we might as
        well load it directly from an ELF image.  */
@@ -273,6 +322,9 @@ static void machine_hppa_init(MachineState *machine)
 
     /* tell firmware how many SMP CPUs to present in inventory table */
     cpu[0]->env.gr[21] = smp_cpus;
+
+    /* tell firmware fw_cfg port */
+    cpu[0]->env.gr[19] = FW_CFG_IO_BASE;
 }
 
 static void hppa_machine_reset(MachineState *ms)
@@ -300,6 +352,8 @@ static void hppa_machine_reset(MachineState *ms)
     cpu[0]->env.gr[24] = 'c';
     /* gr22/gr23 unused, no initrd while reboot. */
     cpu[0]->env.gr[21] = smp_cpus;
+    /* tell firmware fw_cfg port */
+    cpu[0]->env.gr[19] = FW_CFG_IO_BASE;
 }
 
 
diff --git a/pc-bios/hppa-firmware.img b/pc-bios/hppa-firmware.img
index f0f8d0e164..4ba8c7f8b8 100644
--- a/pc-bios/hppa-firmware.img
+++ b/pc-bios/hppa-firmware.img
diff --git a/roms/seabios-hppa b/roms/seabios-hppa
-Subproject 4ff7639e2b86d5775fa7d5cd0dbfa4d3a385a70
+Subproject 73b740f77190643b2ada5ee97a9a108c6ef2a37
diff --git a/target/hppa/cpu.h b/target/hppa/cpu.h
index 801a4fb1ba..fb6c59d075 100644
--- a/target/hppa/cpu.h
+++ b/target/hppa/cpu.h
@@ -196,9 +196,12 @@ struct CPUHPPAState {
     target_ureg shadow[7];   /* shadow registers */
 
     /* ??? The number of entries isn't specified by the architecture.  */
+#define HPPA_TLB_ENTRIES        256
+#define HPPA_BTLB_ENTRIES       0
+
     /* ??? Implement a unified itlb/dtlb for the moment.  */
     /* ??? We should use a more intelligent data structure.  */
-    hppa_tlb_entry tlb[256];
+    hppa_tlb_entry tlb[HPPA_TLB_ENTRIES];
     uint32_t tlb_last;
 };
 
diff --git a/target/hppa/insns.decode b/target/hppa/insns.decode
index f0dd71dd08..dceaad65e9 100644
--- a/target/hppa/insns.decode
+++ b/target/hppa/insns.decode
@@ -149,9 +149,9 @@ lci             000001 ----- ----- -- 01001100 0 t:5
 # Arith/Log
 ####
 
-andcm           000010 ..... ..... .... 000000 0 .....  @rrr_cf
-and             000010 ..... ..... .... 001000 0 .....  @rrr_cf
-or              000010 ..... ..... .... 001001 0 .....  @rrr_cf
+andcm           000010 ..... ..... .... 000000 - .....  @rrr_cf
+and             000010 ..... ..... .... 001000 - .....  @rrr_cf
+or              000010 ..... ..... .... 001001 - .....  @rrr_cf
 xor             000010 ..... ..... .... 001010 0 .....  @rrr_cf
 uxor            000010 ..... ..... .... 001110 0 .....  @rrr_cf
 ds              000010 ..... ..... .... 010001 0 .....  @rrr_cf
@@ -161,13 +161,13 @@ uaddcm_tc       000010 ..... ..... .... 100111 0 .....  @rrr_cf
 dcor            000010 ..... 00000 .... 101110 0 .....  @rr_cf
 dcor_i          000010 ..... 00000 .... 101111 0 .....  @rr_cf
 
-add             000010 ..... ..... .... 0110.. 0 .....  @rrr_cf_sh
+add             000010 ..... ..... .... 0110.. - .....  @rrr_cf_sh
 add_l           000010 ..... ..... .... 1010.. 0 .....  @rrr_cf_sh
 add_tsv         000010 ..... ..... .... 1110.. 0 .....  @rrr_cf_sh
 add_c           000010 ..... ..... .... 011100 0 .....  @rrr_cf_sh0
 add_c_tsv       000010 ..... ..... .... 111100 0 .....  @rrr_cf_sh0
 
-sub             000010 ..... ..... .... 010000 0 .....  @rrr_cf
+sub             000010 ..... ..... .... 010000 - .....  @rrr_cf
 sub_tsv         000010 ..... ..... .... 110000 0 .....  @rrr_cf
 sub_tc          000010 ..... ..... .... 010011 0 .....  @rrr_cf
 sub_tsv_tc      000010 ..... ..... .... 110011 0 .....  @rrr_cf