usb-host: rewrite usb_linux_update_endp_table

This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:

 * We are using the USBDescriptor struct instead of hard-coded offsets
   now to access descriptor data.
 * (debug) printfs are all gone, tracepoints have been added instead.
 * We don't try (and fail) to skip over unneeded descriptors.  We parse
   them all one by one.  We keep track of which configuration, interface
   and altsetting we are looking at and use this information to figure
   which desciptors are in use and which we can ignore.
 * On parse errors we clear all endpoint information, which will
   disallow any communication with the device, except control endpoint
   messages.  This makes sure we don't end up with a silly device state
   where half of the endpoints got enabled and the other half was left
   disabled.
 * Some sanity checks have been added.

The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

2 files changed, 107 insertions, 93 deletions

diff --git a/hw/usb/host-linux.c b/hw/usb/host-linux.c
index a382f0ad98..061a1b7825 100644
--- a/hw/usb/host-linux.c
+++ b/hw/usb/host-linux.c
@@ -42,6 +42,7 @@
 #include <linux/usbdevice_fs.h>
 #include <linux/version.h>
 #include "hw/usb.h"
+#include "hw/usb/desc.h"
 
 /* We redefine it to avoid version problems */
 struct usb_ctrltransfer {
@@ -1108,121 +1109,128 @@ static int usb_host_handle_control(USBDevice *dev, USBPacket *p,
     return USB_RET_ASYNC;
 }
 
-static uint8_t usb_linux_get_alt_setting(USBHostDevice *s,
-    uint8_t configuration, uint8_t interface)
-{
-    char device_name[64], line[1024];
-    int alt_setting;
-
-    sprintf(device_name, "%d-%s:%d.%d", s->bus_num, s->port,
-            (int)configuration, (int)interface);
-
-    if (!usb_host_read_file(line, sizeof(line), "bAlternateSetting",
-                            device_name)) {
-        /* Assume alt 0 on error */
-        return 0;
-    }
-    if (sscanf(line, "%d", &alt_setting) != 1) {
-        /* Assume alt 0 on error */
-        return 0;
-    }
-    return alt_setting;
-}
-
 /* returns 1 on problem encountered or 0 for success */
 static int usb_linux_update_endp_table(USBHostDevice *s)
 {
-    uint8_t *descriptors;
-    uint8_t devep, type, alt_interface;
-    uint16_t raw;
-    int interface, length, i, ep, pid;
+    static const char *tname[] = {
+        [USB_ENDPOINT_XFER_CONTROL] = "control",
+        [USB_ENDPOINT_XFER_ISOC]    = "isoc",
+        [USB_ENDPOINT_XFER_BULK]    = "bulk",
+        [USB_ENDPOINT_XFER_INT]     = "int",
+    };
+    uint8_t devep, type;
+    uint16_t mps, v, p;
+    int ep, pid;
+    unsigned int i, configuration = -1, interface = -1, altsetting = -1;
     struct endp_data *epd;
+    USBDescriptor *d;
+    bool active = false;
 
     usb_ep_init(&s->dev);
 
-    if (s->dev.configuration == 0) {
-        /* not configured yet -- leave all endpoints disabled */
-        return 0;
-    }
-
-    /* get the desired configuration, interface, and endpoint descriptors
-     * from device description */
-    descriptors = &s->descr[18];
-    length = s->descr_len - 18;
-    i = 0;
-
-    while (i < length) {
-        if (descriptors[i + 1] != USB_DT_CONFIG) {
-            fprintf(stderr, "invalid descriptor data\n");
-            return 1;
-        } else if (descriptors[i + 5] != s->dev.configuration) {
-            DPRINTF("not requested configuration %d\n", s->dev.configuration);
-            i += (descriptors[i + 3] << 8) + descriptors[i + 2];
-            continue;
-        }
-        i += descriptors[i];
-
-        if (descriptors[i + 1] != USB_DT_INTERFACE ||
-            (descriptors[i + 1] == USB_DT_INTERFACE &&
-             descriptors[i + 4] == 0)) {
-            i += descriptors[i];
-            continue;
+    for (i = 0;; i += d->bLength) {
+        if (i+2 >= s->descr_len) {
+            break;
         }
-
-        interface = descriptors[i + 2];
-        alt_interface = usb_linux_get_alt_setting(s, s->dev.configuration,
-                                                  interface);
-
-        /* the current interface descriptor is the active interface
-         * and has endpoints */
-        if (descriptors[i + 3] != alt_interface) {
-            i += descriptors[i];
-            continue;
+        d = (void *)(s->descr + i);
+        if (d->bLength < 2) {
+            trace_usb_host_parse_error(s->bus_num, s->addr,
+                                       "descriptor too short");
+            goto error;
         }
-
-        /* advance to the endpoints */
-        while (i < length && descriptors[i +1] != USB_DT_ENDPOINT) {
-            i += descriptors[i];
+        if (i + d->bLength > s->descr_len) {
+            trace_usb_host_parse_error(s->bus_num, s->addr,
+                                       "descriptor too long");
+            goto error;
         }
-
-        if (i >= length)
+        switch (d->bDescriptorType) {
+        case 0:
+            trace_usb_host_parse_error(s->bus_num, s->addr,
+                                       "invalid descriptor type");
+            goto error;
+        case USB_DT_DEVICE:
+            if (d->bLength < 0x12) {
+                trace_usb_host_parse_error(s->bus_num, s->addr,
+                                           "device descriptor too short");
+                goto error;
+            }
+            v = (d->u.device.idVendor_hi << 8) | d->u.device.idVendor_lo;
+            p = (d->u.device.idProduct_hi << 8) | d->u.device.idProduct_lo;
+            trace_usb_host_parse_device(s->bus_num, s->addr, v, p);
             break;
-
-        while (i < length) {
-            if (descriptors[i + 1] != USB_DT_ENDPOINT) {
-                break;
+        case USB_DT_CONFIG:
+            if (d->bLength < 0x09) {
+                trace_usb_host_parse_error(s->bus_num, s->addr,
+                                           "config descriptor too short");
+                goto error;
             }
-
-            devep = descriptors[i + 2];
+            configuration = d->u.config.bConfigurationValue;
+            active = (configuration == s->dev.configuration);
+            trace_usb_host_parse_config(s->bus_num, s->addr,
+                                        configuration, active);
+            break;
+        case USB_DT_INTERFACE:
+            if (d->bLength < 0x09) {
+                trace_usb_host_parse_error(s->bus_num, s->addr,
+                                           "interface descriptor too short");
+                goto error;
+            }
+            interface = d->u.interface.bInterfaceNumber;
+            altsetting = d->u.interface.bAlternateSetting;
+            active = (configuration == s->dev.configuration) &&
+                (altsetting == s->dev.altsetting[interface]);
+            trace_usb_host_parse_interface(s->bus_num, s->addr,
+                                           interface, altsetting, active);
+            break;
+        case USB_DT_ENDPOINT:
+            if (d->bLength < 0x07) {
+                trace_usb_host_parse_error(s->bus_num, s->addr,
+                                           "endpoint descriptor too short");
+                goto error;
+            }
+            devep = d->u.endpoint.bEndpointAddress;
             pid = (devep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT;
             ep = devep & 0xf;
             if (ep == 0) {
-                fprintf(stderr, "usb-linux: invalid ep descriptor, ep == 0\n");
-                return 1;
+                trace_usb_host_parse_error(s->bus_num, s->addr,
+                                           "invalid endpoint address");
+                goto error;
             }
 
-            type = descriptors[i + 3] & 0x3;
-            raw = descriptors[i + 4] + (descriptors[i + 5] << 8);
-            usb_ep_set_max_packet_size(&s->dev, pid, ep, raw);
-            assert(usb_ep_get_type(&s->dev, pid, ep) ==
-                   USB_ENDPOINT_XFER_INVALID);
-            usb_ep_set_type(&s->dev, pid, ep, type);
-            usb_ep_set_ifnum(&s->dev, pid, ep, interface);
-            if ((s->options & (1 << USB_HOST_OPT_PIPELINE)) &&
-                (type == USB_ENDPOINT_XFER_BULK)) {
-                usb_ep_set_pipeline(&s->dev, pid, ep, true);
-            }
+            type = d->u.endpoint.bmAttributes & 0x3;
+            mps = d->u.endpoint.wMaxPacketSize_lo |
+                (d->u.endpoint.wMaxPacketSize_hi << 8);
+            trace_usb_host_parse_endpoint(s->bus_num, s->addr, ep,
+                                          (devep & USB_DIR_IN) ? "in" : "out",
+                                          tname[type], active);
+
+            if (active) {
+                usb_ep_set_max_packet_size(&s->dev, pid, ep, mps);
+                assert(usb_ep_get_type(&s->dev, pid, ep) ==
+                       USB_ENDPOINT_XFER_INVALID);
+                usb_ep_set_type(&s->dev, pid, ep, type);
+                usb_ep_set_ifnum(&s->dev, pid, ep, interface);
+                if ((s->options & (1 << USB_HOST_OPT_PIPELINE)) &&
+                    (type == USB_ENDPOINT_XFER_BULK)) {
+                    usb_ep_set_pipeline(&s->dev, pid, ep, true);
+                }
 
-            epd = get_endp(s, pid, ep);
-            epd->halted = 0;
+                epd = get_endp(s, pid, ep);
+                epd->halted = 0;
+            }
 
-            i += descriptors[i];
+            break;
+        default:
+            trace_usb_host_parse_unknown(s->bus_num, s->addr,
+                                         d->bLength, d->bDescriptorType);
+            break;
         }
     }
-#ifdef DEBUG
-    usb_ep_dump(&s->dev);
-#endif
     return 0;
+
+error:
+    usb_ep_init(&s->dev);
+    return 1;
 }
 
 /*
diff --git a/trace-events b/trace-events
index e7ce5b2cb3..d2e787962f 100644
--- a/trace-events
+++ b/trace-events
@@ -337,6 +337,12 @@ usb_host_reset(int bus, int addr) "dev %d:%d"
 usb_host_auto_scan_enabled(void)
 usb_host_auto_scan_disabled(void)
 usb_host_claim_port(int bus, int hub, int port) "bus %d, hub addr %d, port %d"
+usb_host_parse_device(int bus, int addr, int vendor, int product) "dev %d:%d, id %04x:%04x"
+usb_host_parse_config(int bus, int addr, int value, int active) "dev %d:%d, value %d, active %d"
+usb_host_parse_interface(int bus, int addr, int num, int alt, int active) "dev %d:%d, num %d, alt %d, active %d"
+usb_host_parse_endpoint(int bus, int addr, int ep, const char *dir, const char *type, int active) "dev %d:%d, ep %d, %s, %s, active %d"
+usb_host_parse_unknown(int bus, int addr, int len, int type) "dev %d:%d, len %d, type %d"
+usb_host_parse_error(int bus, int addr, const char *errmsg) "dev %d:%d, msg %s"
 
 # hw/scsi-bus.c
 scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"