aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Hajnoczi <stefanha@redhat.com>2016-12-01 19:26:42 +0000
committerStefan Hajnoczi <stefanha@redhat.com>2017-01-03 16:38:48 +0000
commit4a1cba3802554a3b077d436002519ff1fb0c18bf (patch)
tree57a8294b21598e4176e88ba91e6be74e057a8958
parentf6a51c84cdc97e0178aab7690788d3891d2fcf0a (diff)
aio: add polling mode to AioContext
The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-rw-r--r--aio-posix.c165
-rw-r--r--aio-win32.c10
-rw-r--r--async.c13
-rw-r--r--include/block/aio.h16
-rw-r--r--trace-events4
5 files changed, 178 insertions, 30 deletions
diff --git a/aio-posix.c b/aio-posix.c
index feab8e8a00..c6adddbd82 100644
--- a/aio-posix.c
+++ b/aio-posix.c
@@ -18,6 +18,8 @@
#include "block/block.h"
#include "qemu/queue.h"
#include "qemu/sockets.h"
+#include "qemu/cutils.h"
+#include "trace.h"
#ifdef CONFIG_EPOLL_CREATE1
#include <sys/epoll.h>
#endif
@@ -27,6 +29,7 @@ struct AioHandler
GPollFD pfd;
IOHandler *io_read;
IOHandler *io_write;
+ AioPollFn *io_poll;
int deleted;
void *opaque;
bool is_external;
@@ -210,7 +213,7 @@ void aio_set_fd_handler(AioContext *ctx,
node = find_aio_handler(ctx, fd);
/* Are we deleting the fd handler? */
- if (!io_read && !io_write) {
+ if (!io_read && !io_write && !io_poll) {
if (node == NULL) {
return;
}
@@ -229,6 +232,10 @@ void aio_set_fd_handler(AioContext *ctx,
QLIST_REMOVE(node, node);
deleted = true;
}
+
+ if (!node->io_poll) {
+ ctx->poll_disable_cnt--;
+ }
} else {
if (node == NULL) {
/* Alloc and insert if it's not already there */
@@ -238,10 +245,16 @@ void aio_set_fd_handler(AioContext *ctx,
g_source_add_poll(&ctx->source, &node->pfd);
is_new = true;
+
+ ctx->poll_disable_cnt += !io_poll;
+ } else {
+ ctx->poll_disable_cnt += !io_poll - !node->io_poll;
}
+
/* Update handler with latest information */
node->io_read = io_read;
node->io_write = io_write;
+ node->io_poll = io_poll;
node->opaque = opaque;
node->is_external = is_external;
@@ -251,6 +264,7 @@ void aio_set_fd_handler(AioContext *ctx,
aio_epoll_update(ctx, node, is_new);
aio_notify(ctx);
+
if (deleted) {
g_free(node);
}
@@ -408,10 +422,83 @@ static void add_pollfd(AioHandler *node)
npfd++;
}
+/* run_poll_handlers:
+ * @ctx: the AioContext
+ * @max_ns: maximum time to poll for, in nanoseconds
+ *
+ * Polls for a given time.
+ *
+ * Note that ctx->notify_me must be non-zero so this function can detect
+ * aio_notify().
+ *
+ * Note that the caller must have incremented ctx->walking_handlers.
+ *
+ * Returns: true if progress was made, false otherwise
+ */
+static bool run_poll_handlers(AioContext *ctx, int64_t max_ns)
+{
+ bool progress = false;
+ int64_t end_time;
+
+ assert(ctx->notify_me);
+ assert(ctx->walking_handlers > 0);
+ assert(ctx->poll_disable_cnt == 0);
+
+ trace_run_poll_handlers_begin(ctx, max_ns);
+
+ end_time = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + max_ns;
+
+ do {
+ AioHandler *node;
+
+ QLIST_FOREACH(node, &ctx->aio_handlers, node) {
+ if (!node->deleted && node->io_poll &&
+ node->io_poll(node->opaque)) {
+ progress = true;
+ }
+
+ /* Caller handles freeing deleted nodes. Don't do it here. */
+ }
+ } while (!progress && qemu_clock_get_ns(QEMU_CLOCK_REALTIME) < end_time);
+
+ trace_run_poll_handlers_end(ctx, progress);
+
+ return progress;
+}
+
+/* try_poll_mode:
+ * @ctx: the AioContext
+ * @blocking: polling is only attempted when blocking is true
+ *
+ * If blocking is true then ctx->notify_me must be non-zero so this function
+ * can detect aio_notify().
+ *
+ * Note that the caller must have incremented ctx->walking_handlers.
+ *
+ * Returns: true if progress was made, false otherwise
+ */
+static bool try_poll_mode(AioContext *ctx, bool blocking)
+{
+ if (blocking && ctx->poll_max_ns && ctx->poll_disable_cnt == 0) {
+ /* See qemu_soonest_timeout() uint64_t hack */
+ int64_t max_ns = MIN((uint64_t)aio_compute_timeout(ctx),
+ (uint64_t)ctx->poll_max_ns);
+
+ if (max_ns) {
+ if (run_poll_handlers(ctx, max_ns)) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
- int i, ret;
+ int i;
+ int ret = 0;
bool progress;
int64_t timeout;
@@ -431,42 +518,47 @@ bool aio_poll(AioContext *ctx, bool blocking)
ctx->walking_handlers++;
- assert(npfd == 0);
+ if (try_poll_mode(ctx, blocking)) {
+ progress = true;
+ } else {
+ assert(npfd == 0);
- /* fill pollfds */
+ /* fill pollfds */
- if (!aio_epoll_enabled(ctx)) {
- QLIST_FOREACH(node, &ctx->aio_handlers, node) {
- if (!node->deleted && node->pfd.events
- && aio_node_check(ctx, node->is_external)) {
- add_pollfd(node);
+ if (!aio_epoll_enabled(ctx)) {
+ QLIST_FOREACH(node, &ctx->aio_handlers, node) {
+ if (!node->deleted && node->pfd.events
+ && aio_node_check(ctx, node->is_external)) {
+ add_pollfd(node);
+ }
}
}
- }
- timeout = blocking ? aio_compute_timeout(ctx) : 0;
+ timeout = blocking ? aio_compute_timeout(ctx) : 0;
- /* wait until next event */
- if (timeout) {
- aio_context_release(ctx);
- }
- if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
- AioHandler epoll_handler;
-
- epoll_handler.pfd.fd = ctx->epollfd;
- epoll_handler.pfd.events = G_IO_IN | G_IO_OUT | G_IO_HUP | G_IO_ERR;
- npfd = 0;
- add_pollfd(&epoll_handler);
- ret = aio_epoll(ctx, pollfds, npfd, timeout);
- } else {
- ret = qemu_poll_ns(pollfds, npfd, timeout);
+ /* wait until next event */
+ if (timeout) {
+ aio_context_release(ctx);
+ }
+ if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
+ AioHandler epoll_handler;
+
+ epoll_handler.pfd.fd = ctx->epollfd;
+ epoll_handler.pfd.events = G_IO_IN | G_IO_OUT | G_IO_HUP | G_IO_ERR;
+ npfd = 0;
+ add_pollfd(&epoll_handler);
+ ret = aio_epoll(ctx, pollfds, npfd, timeout);
+ } else {
+ ret = qemu_poll_ns(pollfds, npfd, timeout);
+ }
+ if (timeout) {
+ aio_context_acquire(ctx);
+ }
}
+
if (blocking) {
atomic_sub(&ctx->notify_me, 2);
}
- if (timeout) {
- aio_context_acquire(ctx);
- }
aio_notify_accept(ctx);
@@ -492,6 +584,13 @@ bool aio_poll(AioContext *ctx, bool blocking)
void aio_context_setup(AioContext *ctx)
{
+ /* TODO remove this in final patch submission */
+ if (getenv("QEMU_AIO_POLL_MAX_NS")) {
+ fprintf(stderr, "The QEMU_AIO_POLL_MAX_NS environment variable has "
+ "been replaced with -object iothread,poll-max-ns=NUM\n");
+ exit(1);
+ }
+
#ifdef CONFIG_EPOLL_CREATE1
assert(!ctx->epollfd);
ctx->epollfd = epoll_create1(EPOLL_CLOEXEC);
@@ -503,3 +602,13 @@ void aio_context_setup(AioContext *ctx)
}
#endif
}
+
+void aio_context_set_poll_params(AioContext *ctx, int64_t max_ns, Error **errp)
+{
+ /* No thread synchronization here, it doesn't matter if an incorrect poll
+ * timeout is used once.
+ */
+ ctx->poll_max_ns = max_ns;
+
+ aio_notify(ctx);
+}
diff --git a/aio-win32.c b/aio-win32.c
index 3ef8ea4caa..0a6e91b0c3 100644
--- a/aio-win32.c
+++ b/aio-win32.c
@@ -20,6 +20,7 @@
#include "block/block.h"
#include "qemu/queue.h"
#include "qemu/sockets.h"
+#include "qapi/error.h"
struct AioHandler {
EventNotifier *e;
@@ -38,6 +39,7 @@ void aio_set_fd_handler(AioContext *ctx,
bool is_external,
IOHandler *io_read,
IOHandler *io_write,
+ AioPollFn *io_poll,
void *opaque)
{
/* fd is a SOCKET in our case */
@@ -103,7 +105,8 @@ void aio_set_fd_handler(AioContext *ctx,
void aio_set_event_notifier(AioContext *ctx,
EventNotifier *e,
bool is_external,
- EventNotifierHandler *io_notify)
+ EventNotifierHandler *io_notify,
+ AioPollFn *io_poll)
{
AioHandler *node;
@@ -376,3 +379,8 @@ bool aio_poll(AioContext *ctx, bool blocking)
void aio_context_setup(AioContext *ctx)
{
}
+
+void aio_context_set_poll_params(AioContext *ctx, int64_t max_ns, Error **errp)
+{
+ error_setg(errp, "AioContext polling is not implemented on Windows");
+}
diff --git a/async.c b/async.c
index 678845fb2c..29abf40ca7 100644
--- a/async.c
+++ b/async.c
@@ -349,6 +349,15 @@ static void event_notifier_dummy_cb(EventNotifier *e)
{
}
+/* Returns true if aio_notify() was called (e.g. a BH was scheduled) */
+static bool event_notifier_poll(void *opaque)
+{
+ EventNotifier *e = opaque;
+ AioContext *ctx = container_of(e, AioContext, notifier);
+
+ return atomic_read(&ctx->notified);
+}
+
AioContext *aio_context_new(Error **errp)
{
int ret;
@@ -367,7 +376,7 @@ AioContext *aio_context_new(Error **errp)
false,
(EventNotifierHandler *)
event_notifier_dummy_cb,
- NULL);
+ event_notifier_poll);
#ifdef CONFIG_LINUX_AIO
ctx->linux_aio = NULL;
#endif
@@ -376,6 +385,8 @@ AioContext *aio_context_new(Error **errp)
qemu_rec_mutex_init(&ctx->lock);
timerlistgroup_init(&ctx->tlg, aio_timerlist_notify, ctx);
+ ctx->poll_max_ns = 0;
+
return ctx;
fail:
g_source_destroy(&ctx->source);
diff --git a/include/block/aio.h b/include/block/aio.h
index 7d9cd0d03f..349143f6d9 100644
--- a/include/block/aio.h
+++ b/include/block/aio.h
@@ -131,6 +131,12 @@ struct AioContext {
int external_disable_cnt;
+ /* Number of AioHandlers without .io_poll() */
+ int poll_disable_cnt;
+
+ /* Maximum polling time in nanoseconds */
+ int64_t poll_max_ns;
+
/* epoll(7) state used when built with CONFIG_EPOLL */
int epollfd;
bool epoll_enabled;
@@ -481,4 +487,14 @@ static inline bool aio_context_in_iothread(AioContext *ctx)
*/
void aio_context_setup(AioContext *ctx);
+/**
+ * aio_context_set_poll_params:
+ * @ctx: the aio context
+ * @max_ns: how long to busy poll for, in nanoseconds
+ *
+ * Poll mode can be disabled by setting poll_max_ns to 0.
+ */
+void aio_context_set_poll_params(AioContext *ctx, int64_t max_ns,
+ Error **errp);
+
#endif
diff --git a/trace-events b/trace-events
index f74e1d3d22..7fe3a1b0e8 100644
--- a/trace-events
+++ b/trace-events
@@ -25,6 +25,10 @@
#
# The <format-string> should be a sprintf()-compatible format string.
+# aio-posix.c
+run_poll_handlers_begin(void *ctx, int64_t max_ns) "ctx %p max_ns %"PRId64
+run_poll_handlers_end(void *ctx, bool progress) "ctx %p progress %d"
+
# thread-pool.c
thread_pool_submit(void *pool, void *req, void *opaque) "pool %p req %p opaque %p"
thread_pool_complete(void *pool, void *req, void *opaque, int ret) "pool %p req %p opaque %p ret %d"