diff options
author | John Snow <jsnow@redhat.com> | 2014-08-21 13:44:38 -0400 |
---|---|---|
committer | Stefan Hajnoczi <stefanha@redhat.com> | 2014-09-22 11:39:42 +0100 |
commit | dbc180e5725e4eb4fd1632d0af41189c7410e459 (patch) | |
tree | fae6d80adeee3cb7ba4df9b718062c591bb1fd6d | |
parent | c2f3029fbc5e7beb4cfb7ac264e10838fada524e (diff) |
ahci: Add test_hba_enable to ahci-test.
This test engages the HBA functionality and initializes
values to sane defaults to allow for minimal HBA functionality.
Buffers are allocated and pointers are updated to allow minimal
I/O commands to complete as expected. Error registers and responses
are sanity checked for specification adherence.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-rw-r--r-- | tests/ahci-test.c | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/tests/ahci-test.c b/tests/ahci-test.c index 9d5a7870d9..9cd6faf0e8 100644 --- a/tests/ahci-test.c +++ b/tests/ahci-test.c @@ -277,11 +277,17 @@ static uint32_t ahci_fingerprint; #define AHCI_WRITE(OFST, VAL) qpci_io_writel(ahci, hba_base + (OFST), (VAL)) #define AHCI_RREG(regno) AHCI_READ(4 * (regno)) #define AHCI_WREG(regno, val) AHCI_WRITE(4 * (regno), (val)) +#define AHCI_SET(regno, mask) AHCI_WREG((regno), AHCI_RREG(regno) | (mask)) +#define AHCI_CLR(regno, mask) AHCI_WREG((regno), AHCI_RREG(regno) & ~(mask)) /*** IO macros for port-specific offsets inside of AHCI memory. ***/ #define PX_OFST(port, regno) (HBA_PORT_NUM_REG * (port) + AHCI_PORTS + (regno)) #define PX_RREG(port, regno) AHCI_RREG(PX_OFST((port), (regno))) #define PX_WREG(port, regno, val) AHCI_WREG(PX_OFST((port), (regno)), (val)) +#define PX_SET(port, reg, mask) PX_WREG((port), (reg), \ + PX_RREG((port), (reg)) | (mask)); +#define PX_CLR(port, reg, mask) PX_WREG((port), (reg), \ + PX_RREG((port), (reg)) & ~(mask)); /*** Function Declarations ***/ static QPCIDevice *get_ahci_device(void); @@ -432,6 +438,140 @@ static QPCIDevice *start_ahci_device(QPCIDevice *ahci, void **hba_base) return ahci; } +/** + * Test and initialize the AHCI's HBA memory areas. + * Initialize and start any ports with devices attached. + * Bring the HBA into the idle state. + */ +static void ahci_hba_enable(QPCIDevice *ahci, void *hba_base) +{ + /* Bits of interest in this section: + * GHC.AE Global Host Control / AHCI Enable + * PxCMD.ST Port Command: Start + * PxCMD.SUD "Spin Up Device" + * PxCMD.POD "Power On Device" + * PxCMD.FRE "FIS Receive Enable" + * PxCMD.FR "FIS Receive Running" + * PxCMD.CR "Command List Running" + */ + + g_assert(ahci != NULL); + g_assert(hba_base != NULL); + + uint32_t reg, ports_impl, clb, fb; + uint16_t i; + uint8_t num_cmd_slots; + + g_assert(hba_base != 0); + + /* Set GHC.AE to 1 */ + AHCI_SET(AHCI_GHC, AHCI_GHC_AE); + reg = AHCI_RREG(AHCI_GHC); + ASSERT_BIT_SET(reg, AHCI_GHC_AE); + + /* Read CAP.NCS, how many command slots do we have? */ + reg = AHCI_RREG(AHCI_CAP); + num_cmd_slots = ((reg & AHCI_CAP_NCS) >> ctzl(AHCI_CAP_NCS)) + 1; + g_test_message("Number of Command Slots: %u", num_cmd_slots); + + /* Determine which ports are implemented. */ + ports_impl = AHCI_RREG(AHCI_PI); + + for (i = 0; ports_impl; ports_impl >>= 1, ++i) { + if (!(ports_impl & 0x01)) { + continue; + } + + g_test_message("Initializing port %u", i); + + reg = PX_RREG(i, AHCI_PX_CMD); + if (BITCLR(reg, AHCI_PX_CMD_ST | AHCI_PX_CMD_CR | + AHCI_PX_CMD_FRE | AHCI_PX_CMD_FR)) { + g_test_message("port is idle"); + } else { + g_test_message("port needs to be idled"); + PX_CLR(i, AHCI_PX_CMD, (AHCI_PX_CMD_ST | AHCI_PX_CMD_FRE)); + /* The port has 500ms to disengage. */ + usleep(500000); + reg = PX_RREG(i, AHCI_PX_CMD); + ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR); + ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR); + g_test_message("port is now idle"); + /* The spec does allow for possibly needing a PORT RESET + * or HBA reset if we fail to idle the port. */ + } + + /* Allocate Memory for the Command List Buffer & FIS Buffer */ + /* PxCLB space ... 0x20 per command, as in 4.2.2 p 36 */ + clb = guest_alloc(guest_malloc, num_cmd_slots * 0x20); + g_test_message("CLB: 0x%08x", clb); + PX_WREG(i, AHCI_PX_CLB, clb); + g_assert_cmphex(clb, ==, PX_RREG(i, AHCI_PX_CLB)); + + /* PxFB space ... 0x100, as in 4.2.1 p 35 */ + fb = guest_alloc(guest_malloc, 0x100); + g_test_message("FB: 0x%08x", fb); + PX_WREG(i, AHCI_PX_FB, fb); + g_assert_cmphex(fb, ==, PX_RREG(i, AHCI_PX_FB)); + + /* Clear PxSERR, PxIS, then IS.IPS[x] by writing '1's. */ + PX_WREG(i, AHCI_PX_SERR, 0xFFFFFFFF); + PX_WREG(i, AHCI_PX_IS, 0xFFFFFFFF); + AHCI_WREG(AHCI_IS, (1 << i)); + + /* Verify Interrupts Cleared */ + reg = PX_RREG(i, AHCI_PX_SERR); + g_assert_cmphex(reg, ==, 0); + + reg = PX_RREG(i, AHCI_PX_IS); + g_assert_cmphex(reg, ==, 0); + + reg = AHCI_RREG(AHCI_IS); + ASSERT_BIT_CLEAR(reg, (1 << i)); + + /* Enable All Interrupts: */ + PX_WREG(i, AHCI_PX_IE, 0xFFFFFFFF); + reg = PX_RREG(i, AHCI_PX_IE); + g_assert_cmphex(reg, ==, ~((uint32_t)AHCI_PX_IE_RESERVED)); + + /* Enable the FIS Receive Engine. */ + PX_SET(i, AHCI_PX_CMD, AHCI_PX_CMD_FRE); + reg = PX_RREG(i, AHCI_PX_CMD); + ASSERT_BIT_SET(reg, AHCI_PX_CMD_FR); + + /* AHCI 1.3 spec: if !STS.BSY, !STS.DRQ and PxSSTS.DET indicates + * physical presence, a device is present and may be started. However, + * PxSERR.DIAG.X /may/ need to be cleared a priori. */ + reg = PX_RREG(i, AHCI_PX_SERR); + if (BITSET(reg, AHCI_PX_SERR_DIAG_X)) { + PX_SET(i, AHCI_PX_SERR, AHCI_PX_SERR_DIAG_X); + } + + reg = PX_RREG(i, AHCI_PX_TFD); + if (BITCLR(reg, AHCI_PX_TFD_STS_BSY | AHCI_PX_TFD_STS_DRQ)) { + reg = PX_RREG(i, AHCI_PX_SSTS); + if ((reg & AHCI_PX_SSTS_DET) == SSTS_DET_ESTABLISHED) { + /* Device Found: set PxCMD.ST := 1 */ + PX_SET(i, AHCI_PX_CMD, AHCI_PX_CMD_ST); + ASSERT_BIT_SET(PX_RREG(i, AHCI_PX_CMD), AHCI_PX_CMD_CR); + g_test_message("Started Device %u", i); + } else if ((reg & AHCI_PX_SSTS_DET)) { + /* Device present, but in some unknown state. */ + g_assert_not_reached(); + } + } + } + + /* Enable GHC.IE */ + AHCI_SET(AHCI_GHC, AHCI_GHC_IE); + reg = AHCI_RREG(AHCI_GHC); + ASSERT_BIT_SET(reg, AHCI_GHC_IE); + + /* TODO: The device should now be idling and waiting for commands. + * In the future, a small test-case to inspect the Register D2H FIS + * and clear the initial interrupts might be good. */ +} + /*** Specification Adherence Tests ***/ /** @@ -1038,6 +1178,21 @@ static void test_hba_spec(void) ahci_shutdown(ahci); } +/** + * Engage the HBA functionality of the AHCI PCI device, + * and bring it into a functional idle state. + */ +static void test_hba_enable(void) +{ + QPCIDevice *ahci; + void *hba_base; + + ahci = ahci_boot(); + ahci_pci_enable(ahci, &hba_base); + ahci_hba_enable(ahci, hba_base); + ahci_shutdown(ahci); +} + /******************************************************************************/ int main(int argc, char **argv) @@ -1091,6 +1246,7 @@ int main(int argc, char **argv) qtest_add_func("/ahci/pci_spec", test_pci_spec); qtest_add_func("/ahci/pci_enable", test_pci_enable); qtest_add_func("/ahci/hba_spec", test_hba_spec); + qtest_add_func("/ahci/hba_enable", test_hba_enable); ret = g_test_run(); |