Spelling fixes, by Stefan Weil.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3066 c046a42c-6fe2-441c-8c8c-71466251a162

12 files changed, 17 insertions, 17 deletions

diff --git a/block-raw.c b/block-raw.c
index 29882e1f70..e9e5027683 100644
--- a/block-raw.c
+++ b/block-raw.c
@@ -1295,7 +1295,7 @@ static int hdev_open(BlockDriverState *bs, const char *filename, int flags)
 
 #if 0
 /***********************************************/
-/* removable device additionnal commands */
+/* removable device additional commands */
 
 static int raw_is_inserted(BlockDriverState *bs)
 {
diff --git a/dis-asm.h b/dis-asm.h
index 2b2f1d1dec..ad08cc5d6c 100644
--- a/dis-asm.h
+++ b/dis-asm.h
@@ -421,7 +421,7 @@ extern int generic_symbol_at_address
 /* Call this macro to initialize only the internal variables for the
    disassembler.  Architecture dependent things such as byte order, or machine
    variant are not touched by this macro.  This makes things much easier for
-   GDB which must initialize these things seperatly.  */
+   GDB which must initialize these things separately.  */
 
 #define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
   (INFO).fprintf_func = (FPRINTF_FUNC), \
diff --git a/gdbstub.c b/gdbstub.c
index 06cf30200c..2ac8c5712a 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -1248,12 +1248,12 @@ int gdbserver_start(int port)
     return 0;
 }
 #else
-static int gdb_chr_can_recieve(void *opaque)
+static int gdb_chr_can_receive(void *opaque)
 {
   return 1;
 }
 
-static void gdb_chr_recieve(void *opaque, const uint8_t *buf, int size)
+static void gdb_chr_receive(void *opaque, const uint8_t *buf, int size)
 {
     GDBState *s = opaque;
     int i;
@@ -1304,7 +1304,7 @@ int gdbserver_start(const char *port)
     }
     s->env = first_cpu; /* XXX: allow to change CPU */
     s->chr = chr;
-    qemu_chr_add_handlers(chr, gdb_chr_can_recieve, gdb_chr_recieve,
+    qemu_chr_add_handlers(chr, gdb_chr_can_receive, gdb_chr_receive,
                           gdb_chr_event, s);
     qemu_add_vm_stop_handler(gdb_vm_stopped, s);
     return 0;
diff --git a/hw/i2c.h b/hw/i2c.h
index 17e52e7e80..9330ae8521 100644
--- a/hw/i2c.h
+++ b/hw/i2c.h
@@ -10,7 +10,7 @@ enum i2c_event {
     I2C_START_RECV,
     I2C_START_SEND,
     I2C_FINISH,
-    I2C_NACK /* Masker NACKed a recieve byte.  */
+    I2C_NACK /* Masker NACKed a receive byte.  */
 };
 
 typedef struct i2c_slave i2c_slave;
diff --git a/hw/ide.c b/hw/ide.c
index c4fabe6a64..9acb02a85e 100644
--- a/hw/ide.c
+++ b/hw/ide.c
@@ -1567,7 +1567,7 @@ static void ide_atapi_cmd(IDEState *s)
         buf[1] = 0x80; /* removable */
         buf[2] = 0x00; /* ISO */
         buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
-        buf[4] = 31; /* additionnal length */
+        buf[4] = 31; /* additional length */
         buf[5] = 0; /* reserved */
         buf[6] = 0; /* reserved */
         buf[7] = 0; /* reserved */
diff --git a/hw/pl011.c b/hw/pl011.c
index 64b753019d..149a85e540 100644
--- a/hw/pl011.c
+++ b/hw/pl011.c
@@ -176,7 +176,7 @@ static void pl011_write(void *opaque, target_phys_addr_t offset,
     }
 }
 
-static int pl011_can_recieve(void *opaque)
+static int pl011_can_receive(void *opaque)
 {
     pl011_state *s = (pl011_state *)opaque;
 
@@ -186,7 +186,7 @@ static int pl011_can_recieve(void *opaque)
         return s->read_count < 1;
 }
 
-static void pl011_recieve(void *opaque, const uint8_t *buf, int size)
+static void pl011_receive(void *opaque, const uint8_t *buf, int size)
 {
     pl011_state *s = (pl011_state *)opaque;
     int slot;
@@ -241,7 +241,7 @@ void pl011_init(uint32_t base, qemu_irq irq,
     s->cr = 0x300;
     s->flags = 0x90;
     if (chr){ 
-        qemu_chr_add_handlers(chr, pl011_can_recieve, pl011_recieve,
+        qemu_chr_add_handlers(chr, pl011_can_receive, pl011_receive,
                               pl011_event, s);
     }
     /* ??? Save/restore.  */
diff --git a/hw/pl181.c b/hw/pl181.c
index 912465971f..62ccad9e4e 100644
--- a/hw/pl181.c
+++ b/hw/pl181.c
@@ -160,7 +160,7 @@ static void pl181_send_command(pl181_state *s)
             s->response[2] = RWORD(8);
             s->response[3] = RWORD(12) & ~1;
         }
-        DPRINTF("Response recieved\n");
+        DPRINTF("Response received\n");
         s->status |= PL181_STATUS_CMDRESPEND;
 #undef RWORD
     } else {
@@ -174,7 +174,7 @@ error:
     s->status |= PL181_STATUS_CMDTIMEOUT;
 }
 
-/* Transfer data between teh card and the FIFO.  This is complicated by
+/* Transfer data between the card and the FIFO.  This is complicated by
    the FIFO holding 32-bit words and the card taking data in single byte
    chunks.  FIFO bytes are transferred in little-endian order.  */
    
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index d1e60e8294..705bddb4eb 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -790,7 +790,7 @@ static int rtl8139_can_receive(void *opaque)
     RTL8139State *s = opaque;
     int avail;
 
-    /* Recieve (drop) packets if card is disabled.  */
+    /* Receive (drop) packets if card is disabled.  */
     if (!s->clock_enabled)
       return 1;
     if (!rtl8139_receiver_enabled(s))
diff --git a/hw/usb.c b/hw/usb.c
index efbc6dbe98..17cb8df367 100644
--- a/hw/usb.c
+++ b/hw/usb.c
@@ -140,7 +140,7 @@ int usb_generic_handle_packet(USBDevice *s, USBPacket *p)
                     s->setup_state = SETUP_STATE_IDLE;
                     /* transfer OK */
                 } else {
-                    /* ignore additionnal output */
+                    /* ignore additional output */
                 }
                 break;
             case SETUP_STATE_DATA:
diff --git a/linux-user/signal.c b/linux-user/signal.c
index 5b1334a1ce..6dcb9dc530 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -244,7 +244,7 @@ void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info)
 }
 
 /* XXX: we support only POSIX RT signals are used. */
-/* XXX: find a solution for 64 bit (additionnal malloced data is needed) */
+/* XXX: find a solution for 64 bit (additional malloced data is needed) */
 void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo)
 {
     info->si_signo = tswap32(tinfo->si_signo);
diff --git a/m68k-dis.c b/m68k-dis.c
index dd195582e6..ef0f89c744 100644
--- a/m68k-dis.c
+++ b/m68k-dis.c
@@ -560,7 +560,7 @@ static char *const reg_names[] =
 };
 
 /* Name of register halves for MAC/EMAC.
-   Seperate from reg_names since 'spu', 'fpl' look weird.  */
+   Separate from reg_names since 'spu', 'fpl' look weird.  */
 static char *const reg_half_names[] =
 {
   "%d0", "%d1", "%d2", "%d3", "%d4", "%d5", "%d6", "%d7",
diff --git a/target-i386/cpu.h b/target-i386/cpu.h
index 3a82426b8d..6d764f5353 100644
--- a/target-i386/cpu.h
+++ b/target-i386/cpu.h
@@ -121,7 +121,7 @@
 #define VIP_MASK                0x00100000
 #define ID_MASK                 0x00200000
 
-/* hidden flags - used internally by qemu to represent additionnal cpu
+/* hidden flags - used internally by qemu to represent additional cpu
    states. Only the CPL, INHIBIT_IRQ and HALTED are not redundant. We avoid
    using the IOPL_MASK, TF_MASK and VM_MASK bit position to ease oring
    with eflags. */