| Age | Commit message (Collapse) | Author |
|---|
|
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
|
|
When in IBD, we'd like to use all our outbound peers to help us
sync the chain. Disconnect any outbound peers whose headers have
insufficient work.
|
|
sendheaders.py
6d51eaefe qa: Fix race condition in sendheaders.py (Suhas Daftuar)
c96b2e4f0 qa: Fix replace-by-fee race condition failures (Suhas Daftuar)
Pull request description:
I think #11407 broke replace-by-fee by introducing a race condition. I was observing frequent failures of replace-by-fee locally, always with a mempool sync failure (the sync call was added in #11407).
It appeared to me like there were two causes: sometimes the node would be in IBD and not request the transaction that was relayed; other times the blocks generated in make_utxo wouldn't have relayed quickly enough for the spend of the transaction to be accepted. I believe I've fixed both potential errors.
ping @instagibbs
Edit: I found a race condition in the sendheaders.py test, where if the verack from the python node wasn't processed before the first block in the test was generated, then no block announcement would go out to that peer, breaking the test. Fixed by adding a sync_with_ping after waiting for verack.
Tree-SHA512: 6ad160966e432c151c1ce6e88ae67e60e47123523bda3755cf7697a00e1a5ba38de8561751826e3d7cf0e492f8c2aec298e1b4de8424ebbaf497f099a1ef1d07
|
|
|
|
|
|
|
|
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.
Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.
BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429
Fixes #11429
|
|
cc9ee80 Improve ZMQ functional test (João Barbosa)
Pull request description:
After #11439, this PR only improves:
- test comments;
- simplicity by removing *duplicate* tests;
- also removes duplicate code.
Tree-SHA512: 3636fa9694c827128128742ad31e635d19670c3645aef8e7b1cb46069c21631e8b0db059486a6f6e7eee237a23d93bce6df95190394b5a8dcfce31a49a72d17f
|
|
fafa003 qa: Remove never used return value of sync_with_ping (MarcoFalke)
fa9de37 qa: Make tmpdir option an absolute path (MarcoFalke)
Pull request description:
This should fix issues with the multiwallet test and its symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
Tree-SHA512: 189690f3d065ea2f0f48e06775c86d513d0916c7c86312432e8e16df160e65539e288c2bd53d49a4180735fa940f6fcd52b506ccd7d9815651a9b1a69850dda6
|
|
c5dfa90 [tests] Add uacomment tests (Cristian Mircea Messel)
Pull request description:
Checks for setting the value, max length and reserved characters
Tree-SHA512: a62e2cf8e455a3cd3987c0855f7bfc49de47504c01263e3573366e3cbff400c5678224773d4f1e4ac684fff34d987994e490a0978c4da05ff2a4bfa972c84723
|
|
a44a21517 Fix importmulti bug when importing an already imported key (Pedro Branco)
Pull request description:
This PR fixes a bug in `importmulti` RPC call where it returns an invalid response when importing an already imported key.
Before:
```sh
❯ bitcoin-cli -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655239 }]'
[{ "success": true }]
❯ bitcoin-cli -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655239 }]' '{ "rescan": false }'
[ false ]
❯ bitcoin-cli -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655239 }]' '{ "rescan": true }'
error code: -1
error message:
JSON value is not a boolean as expected
```
After this fix:
```sh
❯ bitcoin-cli -rpcuser=u -rpcpassword=p -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655139 }]'
[{ "success": true }]
❯ bitcoin-cli -rpcuser=u -rpcpassword=p -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655139 }]'
[{ "success": false, "error": { "code": -4, "message": "The wallet already contains the private key for this address or script" } }]
```
Tree-SHA512: 4acebdfb7d0ebd7cd48e943b93ed1cec072db1ace5c42b3f5cc225603764b6e804e4b823b0710965826aafc2f0c615c53d5aefcfdb9bc9c379f5221b798a318c
|
|
|
|
|
|
|
|
|
|
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
|
|
|
|
This should fix issues with the multiwallet test and symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
|
|
|
|
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
|
|
Checks for setting the value, max length and reserved characters
|
|
|
|
857b32b [tests] Add -walletnotify functional test (João Barbosa)
df18d29 [tests] Add -blocknotify functional test (João Barbosa)
9c72a46 [tests] Tidy up forknotify.py (John Newbery)
Pull request description:
This patch adds the missing functional tests for `-blocknotify` and `-walletnotify` notifications. The `-alertnotify` test file `forknotify.py` is renamed to `notifications.py` to accommodate the new tests. Credits to @jnewbery for this cleanup and unification.
Tree-SHA512: ee7b28b9f1bd225587efaefa6427c6d080ccb50ead390b23d94717c137a317183b37be00da0b2bffedd4192a363c971dea510d78d29278eb9fa76374f7855c09
|
|
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
|
|
|
|
|
|
|
|
|
|
47ba8cf71 scripted-diff: rename assert_raises_jsonrpc to assert_raises_rpc error (John Newbery)
677d893ff [tests] do not allow assert_raises_message to be called with JSONRPCException (John Newbery)
5864e9c16 [tests] remove direct testing on JSONRPCException from individual test cases (John Newbery)
Pull request description:
I did this a few months ago (here: #9707), but a few new examples have crept back in.
When testing RPC failures, the test case should always assert the error value and message, to ensure that the failure was for the correct reason. Not doing that can hide bugs in the test code and mean that the test is not testing the correct behaviour.
RPC failure testing should use the utility function `assert_raises_jsonrpc()` (renamed in the final commit of this PR to `assert_raises_rpc_error()`.
This PR does the following:
- changes all remaining instances of tests directly testing on `JSONRPCException` to calls to `assert_raises_jsonrpc()`
- prevents `assert_raises_message()` from being called with `JSONRPCException`
- scripted-diff changes `assert_raises_jsonrpc()` to `assert_raises_rpc_error()`
Tree-SHA512: 2cc5e320704ec623a6e5a27d3c2c81cea86b502e29896f03bb5bf92cc36725132c1144410aecdf49e90d4577d512ee467d50d8184e9d5c5d0870bfc931316a5a
|
|
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
|
|
b7dfc6c [rpc] getblockchaininfo: add size_on_disk, prune_target_size, automatic_pruning (Daniel Edgecumbe)
Pull request description:
Tree-SHA512: c255c27d6c922434d203ffdefda0dd3dddbd765b6a9cce5f80f5af5cb0b1c11c8aff6f4d00e96a326701d0bc81aace2f216fd1985675aa979f76c16f564a6cf6
|
|
Fixes #11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/assert_raises_jsonrpc/assert_raises_rpc_error/g' test/functional/*py test/functional/test_framework/*py
-END VERIFY SCRIPT-
|
|
|
|
|
|
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes #9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
|
|
Tests bug reported in https://github.com/bitcoin/bitcoin/issues/11257
|
|
Without this change, batch RPC calls are not included in coverage logs.
|
|
This fixes a bug in coverage logging that's been around since the logging was
introduced.
|
|
Split off AuthServiceProxy.get_request method to make it easier to batch RPC
requests without duplicating code and remove leading underscore from _batch
method.
This does not change any existing behavior.
|
|
Change AuthServiceProxyWrapper.__getattr__ to only wrap proxied attributes, not
real attributes. This way AuthServiceProxyWrapper can continue logging RPC
calls without complicating other object usages, and special case handling for
the .url property can be dropped.
|
|
|
|
line arg
1088b5322 add functional test for mempoolreplacement command line arg (Gregory Sanders)
Pull request description:
Currently untested.
Tree-SHA512: 2dd9d55a3499844e48b3774df9155fd650220b0761da45d16869570356bb0ed17a88d4efa4302a517dd96e1e9cb34113661b3c9df688736f6849201a3d544deb
|
|
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)
Pull request description:
1. calculate nblocks more adaptive.
-> set default nblocks to min (blocks for 1 month, target block's height - 1)
-> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
2. correct error message.
-> nblocks accepts [1 .. block's height -1] . so add a word "-1".
3. add check 0-divide.
-> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
-> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.
Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
|
|
49f869f Fix bip68-sequence rpc test (Johnson Lau)
Pull request description:
The test mined 1 extra block for the ACTIVE state. Test added to catch the right moment of LOCKED_IN->ACTIVE transaction
Tree-SHA512: a42477cf0b137e7e3b7c6c7b2530101cfad4e4f59866170b8fc0d655c43b3144aad6bca4287a4a8df4c28d7cf08d3f8df166975ad2e8dcb7d2cc15de60cf11cd
|
|
Fix pruneheight help text.
Move fPruneMode block to match output ordering with help text.
Add functional tests for new fields in getblockchaininfo.
|
|
future similar errors
f97ab35fa qa: Fix bug introduced in p2p-segwit.py (Suhas Daftuar)
a7820422e qa: Treat mininode p2p exceptions as fatal (Suhas Daftuar)
Pull request description:
#11121 inadvertently broke the constructor for the `TestNode()` object in `p2p-segwit.py`, silently breaking at least one of the tests.
Although the python code was raising exceptions due to a `TestNode()` object not existing (or having the right type), mininode was masking these from anyone running the test through the test_runner (like travis), because it catches all exceptions during message delivery and just prints a log message and continues. Such "graceful" handling of errors is almost certainly something we don't want in our test suite, so the first commit here attempts to prevent that type of failure from ever being masked.
The second commit fixes the particular bug in `p2p-segwit.py`.
Tree-SHA512: b6646e3cb1e05c35c28e8899c44104bf2e2d0384643ca87042ab7f6ec0960d89f5bf25a7b95bab6e32d401c20a6018226160500f6ddceb923e81ffb04adb4f2f
|
|
d3677ab75 Tests for zmqpubrawtx and zmqpubrawblock (Andrew Chow)
Pull request description:
Tree-SHA512: 9e367fd8936514bfb567ef3f3d83770d374287354b59c9187e844056dd086e8aa2de32ce55d35486cecd706e7c93cd1c1e2709ee82d3dddb805827be8d2bcb14
|
|
|
|
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
|
