Age | Commit message (Collapse) | Author |
|
While limitations on the influence of attackers on addrman already
exist (affected buckets are restricted to a subset based on incoming
IP / network group), there is no reason to permit them to let them
feed us addresses at more than a multiple of the normal network
rate.
This commit introduces a "token bucket" rate limiter for the
processing of addresses in incoming ADDR and ADDRV2 messages.
Every connection gets an associated token bucket. Processing an
address in an ADDR or ADDRV2 message from non-whitelisted peers
consumes a token from the bucket. If the bucket is empty, the
address is ignored (it is not forwarded or processed). The token
counter increases at a rate of 0.1 tokens per second, and will
accrue up to a maximum of 1000 tokens (the maximum we accept in a
single ADDR or ADDRV2). When a GETADDR is sent to a peer, it
immediately gets 1000 additional tokens, as we actively desire many
addresses from such peers (this may temporarily cause the token
count to exceed 1000).
The rate limit of 0.1 addr/s was chosen based on observation of
honest nodes on the network. Activity in general from most nodes
is either 0, or up to a maximum around 0.025 addr/s for recent
Bitcoin Core nodes. A few (self-identified, through subver) crawler
nodes occasionally exceed 0.1 addr/s.
Github-Pull: #22387
Rebased-From: 0d64b8f709b4655d8702f810d4876cd8d96ded82
|
|
Github-Pull: #20535
Rebased-From: fa275e1539941b49fe206ff0bf110e3362bec6bb
|
|
Remove the erroneous trailing newline '\n'. Also, print only the first
value to remove needless redundancy in the error message.
Github-Pull: #22002
Rebased-From: fad0867d6ab9430070aa7d60bf7617a6508e0586
|
|
Github-Pull: #22002
Rebased-From: fa9f711c3746ca3962f15224285a453744cd45b3
|
|
Github-Pull: #21377
Rebased-From: 73d4a706393e6dbd6b6d6b6428f8d3233ac0a2d8
|
|
Github-Pull: #21166
Rebased-From: a97a9298cea085858e1a65a5e9b20d7a9e0f7303
|
|
Reduced version of the test from master/#20861 by John Newbery.
Github-Pull: #20861
Rebased-From: fe5e495c31de47b0ec732b943db11fe345d874af
|
|
This also includes updates to the Python test framework implementation,
test vectors, and release notes.
Github-Pull: #20861
Rebased-From: fe5e495c31de47b0ec732b943db11fe345d874af
|
|
Tests that a fully signed transaction given to
signrawtransactionwithwallet is both unchanged and marked as complete.
This tests for a regression in 0.20 where the transaction would not be
marked as complete.
Github-Pull: #20562
Rebased-From: 773c42b265fb2212b5cb8785b7226a206d063543
|
|
Github-Pull: #21201
Rebased-From: 6bfbc97d716faad38c87603ac6049d222236d623
|
|
Signed-off-by: practicalswift <practicalswift@users.noreply.github.com>
Github-Pull: #21043
Rebased-From: 3ddbf22ed179a2db733af4b521bec5d2b13ebf4b
|
|
Github-Pull: #21081
Rebased-From: 5e0cd25e29541e6c19559fb5c2555e008ed896fa
|
|
Co-authored-by: Jon Atack <jon@atack.com>
Github-Pull: #20852
Rebased-From: 39b43298d9c54f9c18bef36f3d5934f57aefd088
|
|
Github-Pull: #20595
Rebased-From: 0f949cde3dff15170db7930b0f7345ff995c267d
|
|
Github-Pull: #20573
Rebased-From: 6fa72ceb8021c3b5aea62f6cfe92665c29212923
|
|
Github-Pull: #20573
Rebased-From: ce207d6b93d35bc02fcd2dd28f1fd95869261d43
|
|
See the corresponding BIP change: https://github.com/bitcoin/bips/pull/1043
Github-Pull: #20564
Rebased-From: 1583498fb6781c01ca2f33c09319ed793964c574
|
|
as the feeRate argument should soon be deprecated.
Also loosen one test (and a similar one) that caused a one-off CI failure with:
expected message
'Insufficient total fee 0.00000141, must be at least 0.00001704 (oldFee 0.00000999 + incrementalFee 0.00000705)'
actual message
'Insufficient total fee 0.00000141, must be at least 0.00001712 (oldFee 0.00001007 + incrementalFee 0.00000705)'
Github-Pull: #20426
Rebased-From: 3f1e10b2b1cd11f7112fbad6355464bd4adbbc5c
|
|
A check to raise an error on zero-fee txns was mistakenly extended in commit
a0d4957 from the bumpfee and send{toaddress, many} RPCs to also include
fundrawtransaction and walletcreatefundedpsbt.
This commit overrides zero fee rate checking for these two RPCs, not only for
the feeRate (BTC/kvB) arg to return to previous behavior, but also for the new
fee_rate (sat/vB) arg.
Github-Pull: #20426
Rebased-From: 1b3d7009280595108eb22ac1188bc43678
|
|
coverage
ca8cd893bb56bf5d455154b0498b1f58f77d20ed wallet: fix and improve upgradewallet error responses (Jon Atack)
99d56e357159c7154f69f28cb5587c5ca20d6594 wallet: fix and improve upgradewallet result responses (Jon Atack)
2498b04ce88696a3216fc38b7d393906b733e8b1 Don't upgrade to HD split if it is already supported (Andrew Chow)
c46c18b788cb0862aafbb116fd37936cbed6a431 wallet: refactor GetClosestWalletFeature() (Jon Atack)
Pull request description:
Github-Pull: #20403
Rebased-From: c46c18b788cb0862aafbb116fd37936cbed6a431
Github-Pull: #20403
Rebased-From: 2498b04ce88696a3216fc38b7d393906b733e8b1
Github-Pull: #20403
Rebased-From: 99d56e357159c7154f69f28cb5587c5ca20d6594
Github-Pull: #20403
Rebased-From: ca8cd893bb56bf5d455154b0498b1f58f77d20ed
Top commit has no ACKs.
Tree-SHA512: b18a1d015c963298740c585385eaa056988464112c88a519fe619be22dc78a8f6a102365cf799c50b781a77a09bec82b58ce411ab007b48f8b5de876e9c75060
|
|
None-type
fa69c2c78455fd0dc436018fece9ff7fc83a180d wallet: Do not treat default constructed types as None-type (MarcoFalke)
fac4e136fa3d0fab7fde900a6be921313e16e7a6 refactor: Change pointer to reference because it can not be null (MarcoFalke)
Pull request description:
Github-Pull: #20410
Rebased-From: fac4e136fa3d0fab7fde900a6be921313e16e7a6
Github-Pull: #20410
Rebased-From: fa69c2c78455fd0dc436018fece9ff7fc83a180d
Top commit has no ACKs.
Tree-SHA512: 05c3fe29677710b57dcc482fd529b0ab79475519f60f9cfde19f956c4e2212d09b042af458ec4f1272c581360ce841b735dca4df144e0798b3ccf16547de9cd0
|
|
fa05d19bd6ba619bb3f9aabc05c439cd18d34544 test: Fix intermittent issue in mempool_compatibility (MarcoFalke)
Pull request description:
Github-Pull: #20456
Rebased-From: fa05d19bd6ba619bb3f9aabc05c439cd18d34544
Top commit has no ACKs.
Tree-SHA512: c07ed3ffab315da2bf70427882e2da8216964fef97dd538d7c46c5d5b3563b0732626ffbe4b0e19537ad49a8542eedb3c08850cccacdef466f24582defe99d22
|
|
RPC endpoint and wallet_name parameter specify a wallet
b1f59d55d920d2b35269b474762f94fec87bfb16 RPC/Wallet: unloadwallet: Clarify docs/error when both the RPC endpoint and wallet_name parameter specify a wallet (Luke Dashjr)
Pull request description:
Github-Pull: #20462
Rebased-From: b1f59d55d920d2b35269b474762f94fec87bfb16
Top commit has no ACKs.
Tree-SHA512: 2ee0a8a280f56baf196a3a48a59620f297075d23898e6aa3b3e677cdde74826688614d27a477a1448306234c2109fa39083946f691ced10d8bbc53006730784e
|
|
wallet_name parameter specify a wallet
|
|
|
|
7ffac12545328cadd92a3caec4f1c6ca7c127493 tests: shrink feature_taproot transfer of funds tx (Anthony Towns)
Pull request description:
Github-Pull: #20428
Rebased-From: 7ffac12545328cadd92a3caec4f1c6ca7c127493
Top commit has no ACKs.
Tree-SHA512: 4e6b37a44dca3e29d5168b7eb9238a7ce0bbb9b0924a21671537a7c534790fb6b05b1a30a404db434fade030b4f369adfc73694ef85d91884bb7349adddc5f6a
|
|
|
|
|
|
|
|
|
|
It is unnecessary to upgrade to FEATURE_HD_SPLIT if this feature is
already supported by the wallet. Because upgrading to FEATURE_HD_SPLIT
actually requires upgrading to FEATURE_PRE_SPLIT_KEYPOOL, users would
accidentally be upgraded to FEATURE_PRE_SPLIT_KEYPOOL instead of nothing
being done.
Fixes the issue described at
https://github.com/bitcoin/bitcoin/pull/20403#discussion_r526063920
|
|
05e82d86b09d914ebce05dbc92a7299cb026847b wallet: override minfee checks (fOverrideFeeRate) for fee_rate (Jon Atack)
9a670b4f07a6140de809d73cbd7f3e614eb6ea74 wallet: update sendtoaddress, send RPC examples with fee_rate (Jon Atack)
be481b72e24fb6834bd674cd8daee67c6938b42d wallet: use MIN_RELAY_TX_FEE in bumpfee help (Jon Atack)
449b730579566459e350703611629e63e54657ed wallet: provide valid values if invalid estimate mode passed (Jon Atack)
6da3afbaee5809ebf6d88efaa3958c505c2d71c7 wallet: update remaining rpcwallet fee rate units to BTC/kvB (Jon Atack)
173b5b5fe07d45be5a1e5bc7a5df996f20ab1e85 wallet: update fee rate units, use sat/vB for fee_rate error messages (Jon Atack)
7f9835a05abf3e168ad93e7195cbaa4bf61b9b07 wallet: remove fee rates from conf_target helps (Jon Atack)
b7994c01e9a3251536fe6538a22f614774eec82d wallet: add fee_rate unit warnings to bumpfee (Jon Atack)
410e471fa42d3db04e8879c71f8c824dcc151a83 wallet: remove redundant bumpfee fee_rate checks (Jon Atack)
a0d495747320c79b27a83c216dcc526ac8df8f24 wallet: introduce fee_rate (sat/vB) param/option (Jon Atack)
e21212f01b7c41eba13b0479b252053cf482bc1f wallet: remove unneeded WALLET_BTC_KB_TO_SAT_B constant (Jon Atack)
6112cf20d43b0be34fe0edce2ac3e6b27cae1bbe wallet: add CFeeRate ctor doxygen documentation (Jon Atack)
3f7279161347543ce4e997d78ea89a4043491145 wallet: fix bug in RPC send options (Jon Atack)
Pull request description:
This PR builds on #11413 and #20220 to address #19543.
- replace overloading the conf_target and estimate_mode params with `fee_rate` in sat/vB in the sendtoaddress, sendmany, send, fundrawtransaction, walletcreatefundedpsbt, and bumpfee RPCs
- allow non-actionable conf_target value of `0` and estimate_mode value of `""` to be passed to use `fee_rate` as a positional argument, in addition to as a named argument
- fix a bug in the experimental send RPC described in https://github.com/bitcoin/bitcoin/pull/20220#discussion_r513789526 where args were not being passed correctly into the options values
- update the feerate error message units for these RPCs from BTC/kB to sat/vB
- update the test coverage, help docs, doxygen docs, and some of the RPC examples
- other changes to address the excellent review feedback
See this wallet meeting log for more context: http://www.erisian.com.au/bitcoin-core-dev/log-2020-11-06.html#l-309
ACKs for top commit:
achow101:
re-ACK 05e82d8
MarcoFalke:
review ACK 05e82d86b0 did not test and found a few style nits, which can be fixed later 🍯
Xekyo:
tACK 05e82d86b09d914ebce05dbc92a7299cb026847b
Sjors:
utACK 05e82d86b09d914ebce05dbc92a7299cb026847b
Tree-SHA512: a4ee5f184ada53f1840b2923d25873bda88c5a2ae48e67eeea2417a0b35154798cfdb3c147b05dd56bd6608a784e1b91623bb985ee2ab9ef2baaec22206d0a9c
|
|
5f9c0b6360215636cfa62a70d3a70f1feb3977ab wallet: Remove -upgradewallet from dummywallet (MarcoFalke)
a314271f08215feba53ead27096ac7fda34acb3c test: Remove unused wallet.dat (MarcoFalke)
bf7635963c03203e7189ddaa56c6b086a0108cbf tests: Test specific upgradewallet scenarios and that upgrades work (Andrew Chow)
4b418a9decc3e855ee4b0bbf9e61121c8e9904e5 test: Add test_framework/bdb.py module for inspecting bdb files (Andrew Chow)
092fc434854f881330771a93a1280ac67b1d3549 tests: Add a sha256sum_file function to util (Andrew Chow)
0bd995aa19be65b0dd23df1df571c71428c2bc32 wallet: upgrade the CHDChain version number when upgrading to split hd (Andrew Chow)
8e32e1c41c995e832e643f605d35a7aa112837e6 wallet: remove nWalletMaxVersion (Andrew Chow)
bd7398cc6258c258e9f4411c50630ec4a552341b wallet: have ScriptPubKeyMan::Upgrade check against the new version (Andrew Chow)
5f720544f34dedf75b063b962845fa8eca604514 wallet: Add GetClosestWalletFeature function (Andrew Chow)
842ae3842df489f1b8d68e67a234788966218184 wallet: Add utility method for CanSupportFeature (Andrew Chow)
Pull request description:
This PR cleans up the wallet upgrade mechanism a bit, fixes some probably bugs, and adds more test cases.
The `nWalletMaxVersion` member variable has been removed as it made `CanSupportFeature` unintuitive and was causing a couple of bugs. The reason this was introduced originally was to allow a wallet upgrade to only occur when the new feature is first used. While this makes sense for the old `-upgradewallet` option, for an RPC, this does not quite make sense. It's more intuitive for an upgrade to occur if possible if the `upgradewallet` RPC is used as that's an explicit request to upgrade a particular wallet to a newer version. `nWalletMaxVersion` was only relevant for upgrades to `FEATURE_WALLETCRYPT` and `FEATURE_COMPRPUBKEY` both of which are incredibly old features. So for such wallets, the behavior of `upgradewallet` will be that the feature is enabled immediately without the wallet needing to be encrypted at that time (note that `FEATURE_WALLETCRYPT` indicates support for encryption, not that the wallet is encrypted) or for a new key to be generated.
`CanSupportFeature` would previously indicate whether we could upgrade to `nWalletMaxVersion` not just whether the current wallet version supported a feature. While this property was being used to determine whether we should upgrade to HD and HD chain split, it was also causing a few bugs. Determining whether we should upgrade to HD or HD chain split is resolved by passing into `ScriptPubKeyMan::Upgrade` the version we are upgrading to and checking against that. By removing `nWalletMaxVersion` we also fix a bug where you could upgrade to HD chain split without the pre-split keypool.
`nWalletMaxVersion` was also the version that was being reported by `getwalletinfo` which meant that the version reported was not always consistent across restarts as it depended on whether `upgradewallet` was used. Additionally to make the wallet versions consistent with actually supported versions, instead of just setting the wallet version to whatever is given to `upgradewallet`, we normalize the version number to the closest supported version number. For example, if given 150000, we would store and report 139900.
Another bug where CHDChain was not being upgraded to the version supporting HD chain split is also fixed by this PR.
Lastly several more tests have been added. Some refactoring to the test was made to make these tests easier. These tests check specific upgrading scenarios, such as from non-HD (version 60000) to HD to pre-split keypool. Although not specifically related to `upgradewallet`, `UpgradeKeyMetadata` is now being tested too.
Part of the new tests is checking that the wallet files are identical before and after failed upgrades. To facilitate this, a utility function `sha256sum_file` has been added. Another part of the tests is to examine the wallet file itself to ensure that the records in the wallet.dat file have been correctly modified. So a new `bdb.py` module has been added to deserialize the BDB db of the wallet.dat file. This format isn't explicitly documented anywhere, but the code and comments in BDB's source code in file `dbinc/db_page.h` describe it. This module just dumps all of the fields into a dict.
ACKs for top commit:
MarcoFalke:
approach ACK 5f9c0b6360
laanwj:
Code review ACK 5f9c0b6360215636cfa62a70d3a70f1feb3977ab
jonatack:
ACK 5f9c0b6360215636cfa62a70d3a70f1feb3977ab, approach seems fine, code review, only skimmed the test changes but they look well done, rebased on current master, debug built and verified the `wallet_upgradewallet.py` test runs green both before and after running `test/get_previous_releases.py -b v0.19.1 v0.18.1 v0.17.2 v0.16.3 v0.15.2`
Tree-SHA512: 7c4ebf420850d596a586cb6dd7f2ef39c6477847d12d105fcd362abb07f2a8aa4f7afc5bfd36cbc8b8c72fcdd1de8d2d3f16ad8e8ba736b6f4f31f133fe5feba
|
|
in RPCs fundrawtransaction and walletcreatefundedpsbt only.
This provides the existing feeRate (BTC/kvB) behavior in these two RPCs to the
new fee_rate (sat/vB) param also.
See these two GitHub review discussions for more info:
https://github.com/bitcoin/bitcoin/pull/10706/#discussion_r126560525
https://github.com/bitcoin/bitcoin/pull/20305#discussion_r520032533
|
|
Co-authored-by: Murch <murch@murch.one>
|
|
and BTC/kvB for feeRate error messages.
|
|
checks
24d2d3341d07509ad3f37bb6f130446ad20ac807 QA: wallet_multiwallet: Check that recursive symlink directory and wallet.dat loops are ignored (Luke Dashjr)
69f59af54d15ee9800d5df86bcdb0e962c71e7c3 Bugfix: Wallet: Soft-fail exceptions within ListWalletDir file checks (Luke Dashjr)
Pull request description:
Previously, an exception would be thrown, which could kill the node in some circumstances.
Includes test changes to cause failure.
Review with `?w=1`
ACKs for top commit:
hebasto:
re-ACK 24d2d3341d07509ad3f37bb6f130446ad20ac807, rebased only since my [previous](https://github.com/bitcoin/bitcoin/pull/19502#pullrequestreview-520552944) review.
promag:
Tested ACK 24d2d3341d07509ad3f37bb6f130446ad20ac807, test change fails on master.
meshcollider:
utACK 24d2d3341d07509ad3f37bb6f130446ad20ac807
Tree-SHA512: f701f81b3aa3d3e15cee52ac9e7c31a73c0d8166e56bf077235294507cbcee099829fedc432a1c4b6d8780885f4e37897b44b980b08125771de3c849c000499e
|
|
SetFeeEstimateMode() handles these checks now and provides a more actionable
error message.
|
|
Create a fee_rate (sat/vB) RPC param and replace overloading the conf_target and
estimate_mode params in the following 6 RPCs with it:
- sendtoaddress
- sendmany
- send
- fundrawtransaction
- walletcreatefundedpsbt
- bumpfee
In RPC bumpfee, the previously existing fee_rate remains but the unit is changed
from BTC/kvB to sat/vB. This is a breaking change, but it should not be an
overly risky one, as the units change by a factor of 1e5 and any fees specified
in BTC/kvB after this commit will either be too low and raise an error or be 1
sat/vB and can be RBFed.
Update the test coverage for each RPC.
Co-authored-by: Murch <murch@murch.one>
|
|
when empty, options were not being populated by arguments of the same name
found while adding test coverage in 603c0050
|
|
444412821e5349ce0e0b039d884583edb70c4399 test: Fix intermittent issue in wallet_listsinceblock (MarcoFalke)
Pull request description:
ACKs for top commit:
Empact:
Code Review ACK https://github.com/bitcoin/bitcoin/pull/20322/commits/444412821e5349ce0e0b039d884583edb70c4399
Tree-SHA512: 86d47b1e3c8681dd479654589c894016ac81a3c96a34c3b4a75278b2af85054ea8c6f768e518a5322a4928d82d5e99105bbce0f4fa6a7a18c40e3e0799f9ab54
|
|
into a watch-only wallet
538be4219ae7e65862e4aff540af88c9421e6061 wallet: fix importdescriptor silent fail (Ivan Metlushko)
Pull request description:
Currently `importdescriptor` command will successfully import a descriptor with hardened derivations into a watch-only wallet while silently failing to expand the descriptor to fill the cache. This leads to a broken wallet state and failure to load such wallet due to missing cache on subsequent restart.
ACKs for top commit:
laanwj:
Code review ACK 538be4219ae7e65862e4aff540af88c9421e6061
achow101:
ACK 538be4219ae7e65862e4aff540af88c9421e6061
meshcollider:
utACK 538be4219ae7e65862e4aff540af88c9421e6061
Tree-SHA512: 4bdd0ab4437d55b3f1a79c3a300a0b186089155c020fe220a73d0cce274de47d90371d88918d39fd795f9fccf8db328f1e322d29a6062f9ce94a1c254398f004
|
|
GetNetworksInfo, regression tests
7b5bd3102e06f7ff34b5d0f1d45a005560f265a5 test: add getnetworkinfo network name regression tests (Jon Atack)
9a75e1e5697476058b56cd8014a36de31bfecd4c rpc: update GetNetworksInfo() to not return unsupported networks (Jon Atack)
ba8997fb2eda73603ce457bfec668cb7e0acbc89 net: update GetNetworkName() with all enum Network cases (Jon Atack)
Pull request description:
Following up on the BIP155 addrv2 changes, and starting with 7be6ff6 in #19845, RPC getnetworkinfo began returning networks with empty names.
<details><summary><code>getnetworkinfo</code> on current master</summary><p>
```
"networks": [
{
"name": "ipv4",
"limited": false,
"reachable": true,
"proxy": "",
"proxy_randomize_credentials": false
},
{
"name": "ipv6",
"limited": false,
"reachable": true,
"proxy": "",
"proxy_randomize_credentials": false
},
{
"name": "onion",
"limited": false,
"reachable": true,
"proxy": "127.0.0.1:9050",
"proxy_randomize_credentials": true
},
{
"name": "",
"limited": false,
"reachable": true,
"proxy": "",
"proxy_randomize_credentials": false
},
{
"name": "",
"limited": false,
"reachable": true,
"proxy": "",
"proxy_randomize_credentials": false
}
],
```
</p></details>
<details><summary><code>getnetworkinfo</code> on this branch</summary><p>
```
"networks": [
{
"name": "ipv4",
"limited": false,
"reachable": true,
"proxy": "",
"proxy_randomize_credentials": false
},
{
"name": "ipv6",
"limited": false,
"reachable": true,
"proxy": "",
"proxy_randomize_credentials": false
},
{
"name": "onion",
"limited": false,
"reachable": true,
"proxy": "127.0.0.1:9050",
"proxy_randomize_credentials": true
}
],
```
</p></details>
This patch:
- updates `GetNetworkName()` to the current Network enum
- updates `getNetworksInfo()` to ignore as-yet unsupported networks
- adds regression tests
ACKs for top commit:
hebasto:
re-ACK 7b5bd3102e06f7ff34b5d0f1d45a005560f265a5
vasild:
ACK 7b5bd3102
Tree-SHA512: 8f12363eb430e6f45e59e3b1d69c2f2eb5ead254ce7a67547d116c3b70138d763157335a3c85b51f684a3b3b502c6aace4f6fa60ac3b988cf7a9475a7423c4d7
|
|
fab900802d74799ac1004265951be1b66e70cf76 ci: Bump timeout factor (MarcoFalke)
50eb0c2512842b96a0128a7d592a357665f6e006 Small improvements to the Taproot functional tests (Pieter Wuille)
fac865b72d5c0e01fce74b84ab21e5ebbf069327 test: Fix intermittent feature_taproot issue (MarcoFalke)
fa1dea19fc50db449386c9f969adc5ad327a0f0d test: Fix deser issue in create_block (MarcoFalke)
fa762a3fd43e49f8572be69e9129cd9170855f76 test: Remove unused unnamed parameter from block.serialize call (MarcoFalke)
Pull request description:
This fixes three bugs. Also, fix some unrelated code style issues.
Please refer to the commit messages for more information.
ACKs for top commit:
laanwj:
Code review ACK fab900802d74799ac1004265951be1b66e70cf76
Tree-SHA512: 4e22c240cf345710f3b21fc63243126b90014b3656d0865ff87156e958dd1442e6572c6c0a5701dbbe503eee931a0ceb66eeeb3553137f3d1f5afd27a9f9cada
|
|
bd93fc9945bfd4be117990c5d861f61ddd451f96 Fix change detection of imported internal descriptors (Andrew Chow)
Pull request description:
Import internal descriptors were having address book entries added which meant they would be detected as non-change. Fix this and add a test for it.
ACKs for top commit:
laanwj:
Code review ACK bd93fc9945bfd4be117990c5d861f61ddd451f96
meshcollider:
utACK bd93fc9945bfd4be117990c5d861f61ddd451f96
promag:
Code review ACK bd93fc9945bfd4be117990c5d861f61ddd451f96.
Tree-SHA512: 8fa9e364be317627ec171eedffdb505976c0e7f1e55bc7e8cfdffa3aeea5db24d231f55166602cd0e97a5ba621acc871de0a765c75d0c65678f83e93c3b657c5
|
|
wallet.dat loops are ignored
|
|
|
|
|
|
|
|
failure
fae45c34d13330442d5135cb9ac5a56dc697497b test: Only try witness deserialize when checking for witness deserialize failure (MarcoFalke)
Pull request description:
Witness deserialize will fail always. (This is what the test is checking for)
Consequently, non-witness deserialize is also tried, and it might succeed accidentally. Avoid that by not trying non-witness deserialize.
Fixes #20249
ACKs for top commit:
jnewbery:
utACK fae45c34d1
Tree-SHA512: 45e65b31603e3ca839776a7ed30e363b32eba20dfb67b7b55bff06715876850d4f6ba22f8ea4911a62e1f8ffff395bf187b23c46ddc766516b97057df000deb3
|