| Age | Commit message (Collapse) | Author |
|---|
|
Review note: The changes are complete, because self.options.descriptors
is set to None in parse_args (test_framework.py).
A value of None implies -disablewallet, see the previous commit.
So if a call to add_wallet_options is missing, it will lead to a test
failure when the wallet is compiled in.
|
|
so if there is an error in any of the pre-set coins, we can fail right away
without computing the wallet available coins set (calling `AvailableCoins`)
which is a slow operation as it goes through the entire wallet's txes map.
----------------------
And to make the Coin Selection flow cleared, have decoupled SelectCoins in two functions:
1) AutomaticCoinSelection.
2) SelectCoins.
1) AutomaticCoinSelection:
Receives a set of coins and selects the best subset of them to
cover the target amount.
2) SelectCoins
In charge of select all the user manually selected coins first ("pre-set inputs"), and
if coin_control 'm_allow_other_inputs=true', call 'AutomaticCoinSelection' to select a
subset of coins owned by the wallet to cover for the target - preset_inputs.total_amount
remaining value.
|
|
|
|
The external input test with specifying input weight would make a
pessimistic estimate of the input weight. However this would result in a
test failure as it is sometimes too pessimistic when an ECDSA signature
ends up being smaller than usual. To correct this, we can calculate the
input weight more accurately.
|
|
It returns an incorrect result when called with a Decimal,
for which the "//" operator works differently.
Also drop unnecessary call to satoshi_round.
|
|
Added tests to rpc_fundrawtransaction, wallet_send, and rpc_psbt that
test that external inputs can be spent when input weight is provided.
Also tested that the input weight overrides any calculated weight.
Additionally, rpc_psbt's external inputs test is cleaned up a bit to be
more similar to rpc_fundrawtransaction's and avoid potential pitfalls
due to non-deterministic coin selection behavior.
|
|
The previous diff touched most files in ./test/, so bump the headers to
avoid having to touch them again for a bump later.
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./test/
-END VERIFY SCRIPT-
|
|
The sync calls are redundant after a call to generate, because generate
already syncs itself.
-BEGIN VERIFY SCRIPT-
perl -0777 -pi -e 's/(generate[^\n]*\)[^\n]*)(\n|\s)+self.sync_(all|blocks)\([^\)]*\)\n/\1\n/g' $(git grep -l generate ./test)
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed --regexp-extended -i \
's/((self\.)?(nodes\[[^]]+\]|[a-z_]*(wallet|node)[0-9a-z_]*))\.(generate(|toaddress|block|todescriptor)(\(|, ))/self.\5\1, /g' \
$(git grep -l generate ./test | grep -v 'test_framework/' | grep -v 'feature_rbf')
-END VERIFY SCRIPT-
|
|
11d6459b6e101f05f36e13799c400bef82d2fc21 rpc: include_unsafe option for fundrawtransaction (t-bast)
Pull request description:
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning nodes using anchor outputs) are very limited if they can only use safe inputs.
I also added this option to `send` and `walletcreatefundedpsbt` who internally delegate to `fundrawtransaction`.
Fixes #21299
ACKs for top commit:
laanwj:
Code review ACK 11d6459b6e101f05f36e13799c400bef82d2fc21
Tree-SHA512: 5e542a4febcfd6f41cf784678ff02ec9282eae2082c274983f72c5ea87b7ebbe1bd5fdc6a020d7a9d5996157754eb4966b8aeb6c1ceebf0b1519f735579b8bac
|
|
|
|
|
|
|
|
|
|
|
|
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning
nodes using anchor outputs) are very limited if they can only use safe inputs.
Fixes #21299
|
|
1) add a new sane "address" field (for outputs that have an
identifiable address, which doesn't include bare multisig)
2) with -deprecatedrpc: leave "reqSigs" and "addresses" intact
(with all weird/wrong behavior they have now)
3) without -deprecatedrpc: drop "reqSigs" and "addresses" entirely,
always.
|
|
Fixes the wallet setup so this test works with descriptor wallets. Also
enabled explicit descriptor and legacy wallet testing in the test
runner.
|
|
|
|
fa69c2c78455fd0dc436018fece9ff7fc83a180d wallet: Do not treat default constructed types as None-type (MarcoFalke)
fac4e136fa3d0fab7fde900a6be921313e16e7a6 refactor: Change pointer to reference because it can not be null (MarcoFalke)
Pull request description:
Equating `0==None` and `""==None` is confusing, unneeded and undocumented
ACKs for top commit:
jonatack:
ACK fa69c2c78455fd0dc436018fece9ff7fc83a180d
achow101:
ACK fa69c2c78455fd0dc436018fece9ff7fc83a180d
Sjors:
tACK fa69c2c78455fd0dc436018fece9ff7fc83a180d modulo `unset`
Tree-SHA512: c4c8d0ad80c6697621d356a9545caf28ca2facc82bb2fa8e70eceb52372d25f0685237c73688c4b01da0e75d213c77c0d45011a8bdfe81ea783d85f045786dac
|
|
A check to raise an error on zero-fee txns was mistakenly extended in commit
a0d4957 from the bumpfee and send{toaddress, many} RPCs to also include
fundrawtransaction and walletcreatefundedpsbt.
This commit overrides zero fee rate checking for these two RPCs, not only for
the feeRate (BTC/kvB) arg to return to previous behavior, but also for the new
fee_rate (sat/vB) arg.
|
|
|
|
Co-authored-by: Murch <murch@murch.one>
|
|
and BTC/kvB for feeRate error messages.
|
|
Create a fee_rate (sat/vB) RPC param and replace overloading the conf_target and
estimate_mode params in the following 6 RPCs with it:
- sendtoaddress
- sendmany
- send
- fundrawtransaction
- walletcreatefundedpsbt
- bumpfee
In RPC bumpfee, the previously existing fee_rate remains but the unit is changed
from BTC/kvB to sat/vB. This is a breaking change, but it should not be an
overly risky one, as the units change by a factor of 1e5 and any fees specified
in BTC/kvB after this commit will either be too low and raise an error or be 1
sat/vB and can be RBFed.
Update the test coverage for each RPC.
Co-authored-by: Murch <murch@murch.one>
|
|
when empty, options were not being populated by arguments of the same name
found while adding test coverage in 603c0050
|
|
0be29000c011dec0722481dbebb159873da6fa54 rpc: update conf_target helps for correctness/consistency (Jon Atack)
778b9be40667876c705e586849ea9c9e44cf451c wallet, rpc: fix send subtract_fee_from_outputs help (Jon Atack)
603c0050837ec65765208dd54dde354145fbe098 wallet: add rpc send explicit fee rate coverage (Jon Atack)
dd341e602d5160fc621c0299179b91403756b61d wallet: add sendtoaddress/sendmany explicit fee rate coverage (Jon Atack)
44e7bfa60313e4ae67da49e5ba4535038b71b453 wallet: add walletcreatefundedpsbt explicit fee rate coverage (Jon Atack)
6e1ea4273e52fdcd86c87628aa595c03a071ca8c test: refactor for walletcreatefundedpsbt fee rate coverage (Jon Atack)
3ac7b0c6f1c68e74a84d868a454f508bada6b09d wallet: fundrawtx fee rate coverage, fixup ParseConfirmTarget() (Jon Atack)
2d8eba8f8425a2515022d51f1f5b4911329fbf55 wallet: combine redundant bumpfee invalid params and args tests (Jon Atack)
1697a40b6f841a54ee0d9744ed7fd09034b0ddad wallet: improve bumpfee error/help, add explicit fee rate coverage (Jon Atack)
fc5721723d34f76f9e1ffd2e31f274ea6b22f894 wallet: fix SetFeeEstimateMode() error message (Jon Atack)
052427eef1c9da84c474c5161b1910d3328ef0da wallet, bugfix: fix bumpfee with explicit fee rate modes (Jon Atack)
Pull request description:
Follow-up to #11413 providing a base to build on for #19543:
- bugfix for `bumpfee` raising a JSON error with explicit feerates, fixes issue #20219
- adds explicit feerate test coverage for `bumpfee`, `fundrawtransaction`, `walletcreatefundedpsbt`, `send`, `sendtoaddress`, and `sendmany`
- improves a few related RPC error messages and `ParseConfirmTarget()` / error message
- fixes/improves the explicit fee rate information in the 6 RPC helps, of which 2 were also missing `conf_target` sat/B units
This provides a spec and regression coverage for the potential next step of a universal `sat/vB` feerate argument (see #19543), as well as immediate coverage and minimum fixes for 0.21.
ACKs for top commit:
kallewoof:
Concept/Tested ACK 0be29000c011dec0722481dbebb159873da6fa54
meshcollider:
Code review + functional test run ACK 0be29000c011dec0722481dbebb159873da6fa54
Tree-SHA512: efd965003e991cba51d4504e2940f06ab3d742e34022e96a673606b44fad85596aa03a8c1809f06df7ebcf21a38e18a891e54392fe3d6fb4d120bbe4ea0cf5e0
|
|
|
|
|
|
No changes in behavior
|
|
|
|
|
|
|
