Age | Commit message (Collapse) | Author |
|
Review note: The changes are complete, because self.options.descriptors
is set to None in parse_args (test_framework.py).
A value of None implies -disablewallet, see the previous commit.
So if a call to add_wallet_options is missing, it will lead to a test
failure when the wallet is compiled in.
|
|
so if there is an error in any of the pre-set coins, we can fail right away
without computing the wallet available coins set (calling `AvailableCoins`)
which is a slow operation as it goes through the entire wallet's txes map.
----------------------
And to make the Coin Selection flow cleared, have decoupled SelectCoins in two functions:
1) AutomaticCoinSelection.
2) SelectCoins.
1) AutomaticCoinSelection:
Receives a set of coins and selects the best subset of them to
cover the target amount.
2) SelectCoins
In charge of select all the user manually selected coins first ("pre-set inputs"), and
if coin_control 'm_allow_other_inputs=true', call 'AutomaticCoinSelection' to select a
subset of coins owned by the wallet to cover for the target - preset_inputs.total_amount
remaining value.
|
|
|
|
|
|
|
|
ab3c06db1aed979847158505f3df1dcea9fd6c2b doc: Release notes for default RBF (Andrew Chow)
61d9149e7804e2cec8fecf4150837344322eb301 rpc: Default rbf enabled (Andrew Chow)
e3c33637bac7db8ae56ab497df10911fad773981 wallet: Enable -walletrbf by default (Andrew Chow)
Pull request description:
The GUI currently opts in to RBF by default, but RPCs do not, and `-walletrbf` is default disabled. This PR makes the default in those two places to also opt in.
The last time this was proposed (#9527), the primary objections were the novelty at the time, the inability to bump transactions, and the gui not having the option to disable rbf. In the 5 years since, RBF usage has steadily grown, with ~27% of txs opting in. The GUI has the option to enable/disable RBF, and is also defaulted to having it enabled. And we have the ability to bump RBF'd transactions in both the RPC and the GUI. So I think it makes sense to finally change the default to always opt in to RBF.
ACKs for top commit:
darosior:
reACK ab3c06db1aed979847158505f3df1dcea9fd6c2b
aureleoules:
ACK ab3c06db1aed979847158505f3df1dcea9fd6c2b.
glozow:
utACK ab3c06db1a
Tree-SHA512: 81b012c5033e270f86a87a6a196ccc549eb54b158eebf88e917cc6621d40d7bdcd1566b602688907dd5d364b95a557b29f97dce869cea512e339588262c027b6
|
|
|
|
|
|
inputs' UTXOs
d2ed97656bba050051cfc677f1fa7eb3fc633f7d wallet: Precompute Txdata after setting PSBT inputs' UTXOs (Andrew Chow)
Pull request description:
If we are given a PSBT that is missing one or more input UTXOs, our
PrecomputedTransactionData will be incorrect and missing information
that it should otherwise have, and therefore we may not produce a
signature when we should. To avoid this problem, we can do the
precomputation after we have set the UTXOs the wallet is able to set for
the PSBT.
Also adds a test for this behavior.
ACKs for top commit:
instagibbs:
reACK https://github.com/bitcoin/bitcoin/pull/25590/commits/d2ed97656bba050051cfc677f1fa7eb3fc633f7d
Sjors:
ACK d2ed97656bba050051cfc677f1fa7eb3fc633f7d
aureleoules:
ACK d2ed97656bba050051cfc677f1fa7eb3fc633f7d.
Tree-SHA512: 71beb6c7946096e82cfca83f36277302aa9e69d27b4f6d73d7d8f2f9f0ea1c0d653e846fa6aebee5e4763f56f950b4481240e953f6a2412caa84908d519171e1
|
|
|
|
|
|
If we are given a PSBT that is missing one or more input UTXOs, our
PrecomputedTransactionData will be incorrect and missing information
that it should otherwise have, and therefore we may not produce a
signature when we should. To avoid this problem, we can do the
precomputation after we have set the UTXOs the wallet is able to set for
the PSBT.
Also adds a test for this behavior.
|
|
|
|
|
|
The external input test with specifying input weight would make a
pessimistic estimate of the input weight. However this would result in a
test failure as it is sometimes too pessimistic when an ECDSA signature
ends up being smaller than usual. To correct this, we can calculate the
input weight more accurately.
|
|
Added tests to rpc_fundrawtransaction, wallet_send, and rpc_psbt that
test that external inputs can be spent when input weight is provided.
Also tested that the input weight overrides any calculated weight.
Additionally, rpc_psbt's external inputs test is cleaned up a bit to be
more similar to rpc_fundrawtransaction's and avoid potential pitfalls
due to non-deterministic coin selection behavior.
|
|
Make the behavior align with the help text by actually using
SIGHASH_DEFAULT as the default sighash for signing PSBTs.
|
|
finalizing
a99ed8986554fa1ecc854e43ea373d957e598db8 psbt: sign without finalizing (Andrew Chow)
Pull request description:
It can be useful to sign an input with `walletprocesspsbt` but not finalize that input if it is complete. This PR adds another option to `walletprocesspsbt` to be able to do that. We will still finalize by default.
This does not materially change the PSBT workflow since `finalizepsbt` needs to be called in order to extract the tx for broadcast.
ACKs for top commit:
meshcollider:
utACK a99ed8986554fa1ecc854e43ea373d957e598db8
Sjors:
utACK a99ed89
Tree-SHA512: c88e5d3222109c5f4e763b1b9d97ce4655f68f2985a4509caab2d4e7f5bac5047328fd69696e82a330f5c5a333e0312568ae293515689b77a4747ca2f17caca6
|
|
|
|
The previous diff touched most files in ./test/, so bump the headers to
avoid having to touch them again for a bump later.
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./test/
-END VERIFY SCRIPT-
|
|
The sync calls are redundant after a call to generate, because generate
already syncs itself.
-BEGIN VERIFY SCRIPT-
perl -0777 -pi -e 's/(generate[^\n]*\)[^\n]*)(\n|\s)+self.sync_(all|blocks)\([^\)]*\)\n/\1\n/g' $(git grep -l generate ./test)
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
We don't always want to finalize after signing, so make it possible to
do that.
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed --regexp-extended -i \
's/((self\.)?(nodes\[[^]]+\]|[a-z_]*(wallet|node)[0-9a-z_]*))\.(generate(|toaddress|block|todescriptor)(\(|, ))/self.\5\1, /g' \
$(git grep -l generate ./test | grep -v 'test_framework/' | grep -v 'feature_rbf')
-END VERIFY SCRIPT-
|
|
11d6459b6e101f05f36e13799c400bef82d2fc21 rpc: include_unsafe option for fundrawtransaction (t-bast)
Pull request description:
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning nodes using anchor outputs) are very limited if they can only use safe inputs.
I also added this option to `send` and `walletcreatefundedpsbt` who internally delegate to `fundrawtransaction`.
Fixes #21299
ACKs for top commit:
laanwj:
Code review ACK 11d6459b6e101f05f36e13799c400bef82d2fc21
Tree-SHA512: 5e542a4febcfd6f41cf784678ff02ec9282eae2082c274983f72c5ea87b7ebbe1bd5fdc6a020d7a9d5996157754eb4966b8aeb6c1ceebf0b1519f735579b8bac
|
|
|
|
|
|
|
|
|
|
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning
nodes using anchor outputs) are very limited if they can only use safe inputs.
Fixes #21299
|
|
1) add a new sane "address" field (for outputs that have an
identifiable address, which doesn't include bare multisig)
2) with -deprecatedrpc: leave "reqSigs" and "addresses" intact
(with all weird/wrong behavior they have now)
3) without -deprecatedrpc: drop "reqSigs" and "addresses" entirely,
always.
|
|
-BEGIN VERIFY SCRIPT-
git grep -l "self.setup_clean_chain = False" test/functional/*.py | xargs sed -i "/self.setup_clean_chain = False/d";
-END VERIFY SCRIPT-
|
|
|
|
A check to raise an error on zero-fee txns was mistakenly extended in commit
a0d4957 from the bumpfee and send{toaddress, many} RPCs to also include
fundrawtransaction and walletcreatefundedpsbt.
This commit overrides zero fee rate checking for these two RPCs, not only for
the feeRate (BTC/kvB) arg to return to previous behavior, but also for the new
fee_rate (sat/vB) arg.
|
|
in RPCs fundrawtransaction and walletcreatefundedpsbt only.
This provides the existing feeRate (BTC/kvB) behavior in these two RPCs to the
new fee_rate (sat/vB) param also.
See these two GitHub review discussions for more info:
https://github.com/bitcoin/bitcoin/pull/10706/#discussion_r126560525
https://github.com/bitcoin/bitcoin/pull/20305#discussion_r520032533
|
|
Co-authored-by: Murch <murch@murch.one>
|
|
and BTC/kvB for feeRate error messages.
|
|
Create a fee_rate (sat/vB) RPC param and replace overloading the conf_target and
estimate_mode params in the following 6 RPCs with it:
- sendtoaddress
- sendmany
- send
- fundrawtransaction
- walletcreatefundedpsbt
- bumpfee
In RPC bumpfee, the previously existing fee_rate remains but the unit is changed
from BTC/kvB to sat/vB. This is a breaking change, but it should not be an
overly risky one, as the units change by a factor of 1e5 and any fees specified
in BTC/kvB after this commit will either be too low and raise an error or be 1
sat/vB and can be RBFed.
Update the test coverage for each RPC.
Co-authored-by: Murch <murch@murch.one>
|
|
0be29000c011dec0722481dbebb159873da6fa54 rpc: update conf_target helps for correctness/consistency (Jon Atack)
778b9be40667876c705e586849ea9c9e44cf451c wallet, rpc: fix send subtract_fee_from_outputs help (Jon Atack)
603c0050837ec65765208dd54dde354145fbe098 wallet: add rpc send explicit fee rate coverage (Jon Atack)
dd341e602d5160fc621c0299179b91403756b61d wallet: add sendtoaddress/sendmany explicit fee rate coverage (Jon Atack)
44e7bfa60313e4ae67da49e5ba4535038b71b453 wallet: add walletcreatefundedpsbt explicit fee rate coverage (Jon Atack)
6e1ea4273e52fdcd86c87628aa595c03a071ca8c test: refactor for walletcreatefundedpsbt fee rate coverage (Jon Atack)
3ac7b0c6f1c68e74a84d868a454f508bada6b09d wallet: fundrawtx fee rate coverage, fixup ParseConfirmTarget() (Jon Atack)
2d8eba8f8425a2515022d51f1f5b4911329fbf55 wallet: combine redundant bumpfee invalid params and args tests (Jon Atack)
1697a40b6f841a54ee0d9744ed7fd09034b0ddad wallet: improve bumpfee error/help, add explicit fee rate coverage (Jon Atack)
fc5721723d34f76f9e1ffd2e31f274ea6b22f894 wallet: fix SetFeeEstimateMode() error message (Jon Atack)
052427eef1c9da84c474c5161b1910d3328ef0da wallet, bugfix: fix bumpfee with explicit fee rate modes (Jon Atack)
Pull request description:
Follow-up to #11413 providing a base to build on for #19543:
- bugfix for `bumpfee` raising a JSON error with explicit feerates, fixes issue #20219
- adds explicit feerate test coverage for `bumpfee`, `fundrawtransaction`, `walletcreatefundedpsbt`, `send`, `sendtoaddress`, and `sendmany`
- improves a few related RPC error messages and `ParseConfirmTarget()` / error message
- fixes/improves the explicit fee rate information in the 6 RPC helps, of which 2 were also missing `conf_target` sat/B units
This provides a spec and regression coverage for the potential next step of a universal `sat/vB` feerate argument (see #19543), as well as immediate coverage and minimum fixes for 0.21.
ACKs for top commit:
kallewoof:
Concept/Tested ACK 0be29000c011dec0722481dbebb159873da6fa54
meshcollider:
Code review + functional test run ACK 0be29000c011dec0722481dbebb159873da6fa54
Tree-SHA512: efd965003e991cba51d4504e2940f06ab3d742e34022e96a673606b44fad85596aa03a8c1809f06df7ebcf21a38e18a891e54392fe3d6fb4d120bbe4ea0cf5e0
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
# max-depth=0 excludes test/functional/test_framework/...
FILES=$(git grep -l --max-depth 0 "connect_nodes" test/functional)
# Replace (dis)?connect_nodes(self.nodes[a], b) with self.(dis)?connect_nodes(a, b)
sed -i 's/\b\(dis\)\?connect_nodes(self\.nodes\[\(.*\)\]/self.\1connect_nodes(\2/g' $FILES
# Remove imports in the middle of a line
sed -i 's/\(dis\)\?connect_nodes, //g' $FILES
sed -i 's/, \(dis\)\?connect_nodes//g' $FILES
# Remove imports on a line by themselves
sed -i '/^\s*\(dis\)\?connect_nodes,\?$/d' $FILES
sed -i '/^from test_framework\.util import connect_nodes$/d' $FILES
-END VERIFY SCRIPT-
Co-authored-by: Elliott Jin <elliott.jin@gmail.com>
|
|
A later scripted-diff commit replaces the majority of uses, which all
follow this pattern:
(dis)?connect_nodes(self.nodes[a], b)
This commit replaces the few "special cases".
|
|
clients
b048b275d9711f70847afaea5450f17a0f7e673a [validation] Remove absurdfee from accepttomempool (John Newbery)
932564b9cfda8446a957649c2316a52e868ad5d4 scripted-diff: update max-fee-exceeded error message to include RPC (gzhao408)
8f1290c60159a3171c27250bc95687548c5c1b84 [rpc/node] check for high fee before ATMP in clients (gzhao408)
Pull request description:
Picked up from #15810. Add separate fee-checking logic for clients that need to enforce max fee rates, then remove the `absurdFee` logic from ATMP.
ATMP's `nAbsurdFee` argument is used to enforce user-specific behavior (it is not policy since it isn't applied consistently: it is only ever used in RPC and wallet, and set to 0 everywhere else internally). It should be removed from `AcceptToMemoryPool` because (1) validation results/mempool behavior should not be user-specific and (2) enforcing a max fee rate should be the responsibility of the client instead of the mempool.
Note: this PR does not intend to _remove_ protection from high fees, just re-delegate the responsibility to clients.
ACKs for top commit:
jnewbery:
utACK b048b275d9711f70847afaea5450f17a0f7e673a
LarryRuane:
re-ACK b048b275d9711f70847afaea5450f17a0f7e673a
MarcoFalke:
re-ACK b048b275d9 , only change is squashing one commit 🏦
instagibbs:
utACK https://github.com/bitcoin/bitcoin/pull/19339/commits/b048b275d9711f70847afaea5450f17a0f7e673a
Tree-SHA512: 57c17ba16d230a4cae2896dd6a64c924f307757824e35784bf96da7b10aff2d8ea910710edf35e981035623a155f8766209a92a0fdb856549fde78bc3eaae4d2
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/Fee exceeds maximum configured by \-\maxtxfee/Fee exceeds maximum configured by user (e.g. -maxtxfee, maxfeerate)/g' src/util/error.cpp test/functional/rpc_fundrawtransaction.py test/functional/rpc_psbt.py test/functional/rpc_rawtransaction.py test/functional/wallet_bumpfee.py test/functional/wallet_create_tx.py
-END VERIFY SCRIPT-
|
|
Make sure the options "change_type" and "changeAddress" of the
walletcreatefundedpsbt RPC cannot both be specified a the same time.
|
|
Make sure the wallet's default change type is respected by default when
funding a PSBT but can be overwritten by the "change_type" option.
|