Age | Commit message (Collapse) | Author |
|
Adds test in mempool_accept to check if a negative maxfeerate is inputed
into check_mempool_result, asserts "Amount out of range" error message
and -3 error code
|
|
|
|
In functional tests it is a quite common scenario to generate fresh
elliptic curve keypairs, which is currently a bit cumbersome as it
involves multiple steps, e.g.:
privkey = ECKey()
privkey.generate()
privkey_wif = bytes_to_wif(privkey.get_bytes())
pubkey = privkey.get_pubkey().get_bytes()
Simplify this by providing a new `generate_keypair` helper function that
returns the private key either as `ECKey` object or as WIF-string
(depending on the boolean `wif` parameter) and the public key as
byte-string; these formats are what we mostly need (currently we don't
use `ECPubKey` objects from generated keypairs anywhere).
With this, most of the affected code blocks following the pattern above
can be replaced by one-liners, e.g.:
privkey, pubkey = generate_keypair(wif=True)
Note that after this commit, the only direct uses of `ECKey` remain in
situations where we want to set the private key explicitly, e.g. in
MiniWallet (test/functional/test_framework/wallet.py) or the test for
the signet miner script (test/functional/tool_signet_miner.py).
|
|
|
|
this simplifies usage when MiniWallet is used with a pre-mined chain.
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
Commits of previous years:
- 2021: f47dda2c58b5d8d623e0e7ff4e74bc352dfa83d7
- 2020: fa0074e2d82928016a43ca408717154a1c70a4db
- 2019: aaaaad6ac95b402fe18d019d67897ced6b316ee0
|
|
Since the original fix was set to be a "reasonable" transaction
to reduce allocations and the true motivation later revealed,
it makes sense to relax this check to something more principled.
There are more exotic transaction patterns that could take advantage
of a relaxed requirement, such as 1 input, 1 output OP_RETURN to burn
a utxo to fees for CPFP purposes when change isn't practical.
Two changes could be accomplished:
1) Anything not 64 bytes could be allowed
2) Anything above 64 bytes could be allowed
In the Great Consensus Cleanup, suggestion (2) was the route taken.
It would not allow an "empty" OP_RETURN
but would reduce the required padding from 22 bytes to 5.
The functional test is also modified to test the actual case
we care about: 64 bytes
|
|
We were throwing two different errors for the same problematic:
* "Expected type {expected], got {type}" --> RPCTypeCheckArgument()
* "JSON value of type {type} is not of expected type {expected}" --> UniValue::checkType()
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's:BIP125_SEQUENCE_NUMBER:MAX_BIP125_RBF_SEQUENCE:g' $(git grep -l BIP125_SEQUENCE_NUMBER ./test)
-END VERIFY SCRIPT-
|
|
|
|
This test can now be run even with the Bitcoin Core wallet disabled.
|
|
|
|
The previous diff touched most files in ./test/, so bump the headers to
avoid having to touch them again for a bump later.
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./test/
-END VERIFY SCRIPT-
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed --regexp-extended -i \
's/((self\.)?(nodes\[[^]]+\]|[a-z_]*(wallet|node)[0-9a-z_]*))\.(generate(|toaddress|block|todescriptor)(\(|, ))/self.\5\1, /g' \
$(git grep -l generate ./test | grep -v 'test_framework/' | grep -v 'feature_rbf')
-END VERIFY SCRIPT-
|
|
607076d01bf23c69ac21950c17b01fb4e1130774 test: remove confusing `MAX_BLOCK_BASE_SIZE` (Sebastian Falbesoner)
4af97c74edcda56cd15523bf3a335adea2bad14a test: introduce `get_weight()` helper for CBlock (Sebastian Falbesoner)
a084ebe1330bcec15715e08b0f65319142927ad1 test: introduce `get_weight()` helper for CTransaction (Sebastian Falbesoner)
Pull request description:
This is a very late follow-up PR to #10618, which removed the constant `MAX_BLOCK_BASE_SIZE` from the core implementation about four years ago (see also #10608 in why it was considered confusing and superfluous).
Since there is also no point in still keeping it in the functional test framework, the PR switches to weight-based accounting on the relevant test code parts and use `MAX_BLOCK_WEIGHT` instead for the block limit checks. To prepare that, the first two commits introduce `get_weight()` helpers for the classes CTransaction and CBlock, respectively.
ACKs for top commit:
MarcoFalke:
review ACK 607076d01bf23c69ac21950c17b01fb4e1130774 🚴
Tree-SHA512: d59aa0b6b3dfd0a849b8063e66de275d252f705f99e25cd3bf6daec028b47d946777ee5b42a060f5283cb18e917ac073119c2c0e11bbc21211f69ef0a6ed335a
|
|
creating P2{PKH,SH,WPKH,WSH} scripts
905d672b743edf31531d095ffe800449eaffec69 test: use script_util helpers for creating P2W{PKH,SH} scripts (Sebastian Falbesoner)
285a65ccfde2e811cfe01e916b998c02ee534a97 test: use script_util helpers for creating P2SH scripts (Sebastian Falbesoner)
b57b633b942da162045b1fe7743a8abdfeaf60e2 test: use script_util helpers for creating P2PKH scripts (Sebastian Falbesoner)
61b6a017a9f99ef072b2d1980dd547eb20093352 test: wallet util: fix multisig P2SH-P2WSH script creation (Sebastian Falbesoner)
Pull request description:
PR #18788 (commit 08067aebfd7e838e6ce6b030c31a69422260fc6f) introduced functions to generate output scripts for various types. This PR replaces all manual CScript creations in the P2PKH, P2SH, P2WPKH, P2WSH formats with those helpers in order to increase readability and maintainability over the functional test codebase. The first commit fixes a bug in the wallet_util helper module w.r.t. to P2SH-P2WSH script creation (the result is not used in any test so far, hence it can still be seen as refactoring).
The following table shows a summary of the output script patterns tackled in this PR:
| Type | master branch | PR branch |
| ---------- | ------------- | ------------- |
| P2PKH | `CScript([OP_DUP, OP_HASH160, hash160(key), OP_EQUALVERIFY, OP_CHECKSIG])` | `key_to_p2pkh_script(key)` |
| | `CScript([OP_DUP, OP_HASH160, keyhash, OP_EQUALVERIFY, OP_CHECKSIG])` | `keyhash_to_p2pkh_script(keyhash)` |
| P2SH | `CScript([OP_HASH160, hash160(script), OP_EQUAL])` | `script_to_p2sh_script(script)` |
| P2WPKH | `CScript([OP_0, hash160(key)])` | `key_to_p2wpkh_script(key)` |
| P2WSH | `CScript([OP_0, sha256(script)])` | `script_to_p2wsh_script(script)` |
Note that the `key_to_...` helpers can't be used if an invalid key size (not 33 or 65 bytes) is passed, which is the case in some rare instances where the scripts still have to be created manually.
Possible follow-up ideas:
* further simplify by identifying P2SH-wrapped scripts and using `key_to_p2sh_p2wpkh_script()` and `script_to_p2sh_p2wsh_script()` helpers
* introduce and use `key_to_p2pk_script()` helper for P2PK scripts
ACKs for top commit:
rajarshimaitra:
tACK https://github.com/bitcoin/bitcoin/pull/22363/commits/905d672b743edf31531d095ffe800449eaffec69
LarryRuane:
tACK 905d672b743edf31531d095ffe800449eaffec69
0xB10C:
ACK 905d672b743edf31531d095ffe800449eaffec69
MarcoFalke:
review ACK 905d672b743edf31531d095ffe800449eaffec69 🕹
Tree-SHA512: 7ccfe69699bc81168ac122b03536720013355c1b2fbb088355b616015318644c4d1cd27e20c4f56c89ad083ae609add4bc838cf6316794d0edb0ce9cf7fa0fd8
|
|
|
|
|
|
The constant `MAX_BLOCK_BASE_SIZE` has been removed from the
core implementation years ago due to being confusing and
superfluous, as it is implied by the block weight limit (see
PRs #10618 and #10608). Since there is also no point in
still keeping it in the functional test framework, we switch
to weight-based accounting on the relevant test code parts
and use `MAX_BLOCK_WEIGHT` instead for the block limit
checks.
|
|
`FromHex` is mostly used for transactions, so we introduce a
shortcut `tx_from_hex` for `FromHex(CTransaction, hex_str)`.
|
|
Only allow "packages" with no conflicts, sorted in order of dependency,
and no more than 25 for now. Note that these groups of transactions
don't necessarily need to adhere to some strict definition of a package
or have any dependency relationships. Clients are free to pass in a
batch of 25 unrelated transactions if they want to.
|
|
|
|
+ fee, fee_expected, output_amount
+ Using value of coin['amount'] as decimal and removed 'int'
+ Removed unnecessary parentheses
+ Remove str() and use quotes
|
|
|
|
Return fee and vsize if tx would pass ATMP.
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
|
|
1be0b1fb2adcf95d76f879195564c0bf84162e31 test: add functional test for non-standard bare multisig txs (Sebastian Falbesoner)
Pull request description:
Approaches another missing functional test of issue #17394 (counterpart to unit test in PR #17502): A transaction is rejected by the mempool with reason `"bare-multisig"` if any of the outputs' scriptPubKey has bare multisig format (`M <PubKey1> <PubKey2> ... <PubKeyN> N OP_CHECKSIG`) and bitcoind is started with the argument `-permitbaremultisig=0`.
ACKs for top commit:
instagibbs:
utACK https://github.com/bitcoin/bitcoin/pull/17541/commits/1be0b1fb2adcf95d76f879195564c0bf84162e31
kristapsk:
ACK 1be0b1fb2adcf95d76f879195564c0bf84162e31
Tree-SHA512: 2cade68c4454029b62278b38d0f137c2605a0e4450c435cdda2833667234edd4406f017ed12fa8df9730618654acbaeb68b16dcabb9f5aa84bad9f1c76c6d476
|
|
|
|
A transaction is rejected by the mempool with reason "bare-multisig" if any of
the outputs' scriptPubKey has bare multisig format (M <PubKey1> <PubKey2> ...
<PubKeyN> N OP_CHECKSIG) and bitcoind is started with "-permitbaremultisig=0".
|
|
A transaction is rejected by the mempool with reason "scriptsig-size" if any of
the inputs' scriptSig is larger than 1650 bytes.
|
|
Remove the BIP61 REJECT code from error messages and logs when a
transaction is rejected.
BIP61 support was removed from Bitcoin Core in
fa25f43ac5692082dba3f90456c501eb08f1b75c. The REJECT codes will be
removed from the codebase entirely in the following commit.
|
|
2dfd6834ef8737e16e4b96df0c459f30a0721d6c test: Add test for default maxfeerate in sendrawtransaction (Joonmo Yang)
261843e4bef96ab296a9775819a99bfa60cad743 wallet/rpc: Use the default maxfeerate value as BTC/kB (Joonmo Yang)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/16382
This patch tries to treat `maxfeerate` in sendrawtransaction/testmempoolaccept RPC as a rate(BTC/kB) instead of an absolute value(BTC).
The included test case checks if the new behavior works correctly, by using the transaction with an absolute fee of ~0.02BTC, where the fee rate is ~0.2BTC/kB.
This test should be failing if the default `maxfeerate` is 0.1BTC, but pass if the default value is 0.1BTC/kB
ACKs for top commit:
laanwj:
ACK 2dfd6834ef8737e16e4b96df0c459f30a0721d6c (ACKs by Sjors and MarcoFalke above for trivially different code)
Tree-SHA512: a1795bffe8a182acef8844797955db1f60bb0c0ded97148f3572dc265234d5219271a3a7aa0b6418a43f73b2b2720ef7412ba169c99bb1cdcac52051f537d6af
|
|
p2p_invalid_block test.
0c62e3aa73839e97e65a3155e06a98d84b700a1e New regression testing for CVE-2018-17144, CVE-2012-2459, and CVE-2010-5137. (lucash-dev)
38bfca6bb2ad68719415e9c54a981441052da072 Added comments referencing multiple CVEs in tests and production code. (lucash-dev)
Pull request description:
This functional test includes two scenarios that test for regressions of vulnerabilities, but they are only briefly described. There are freely available documents explaining in detail the issues, but without explicit mentions, the developer trying to maintain the code needs an additional step of digging in commit history and PR conversations to figure it out.
Added comments to explicitly mention CVE-2018-17144 and CVE-2012-2459, for more complete documentation.
This improves developer experience by making understanding the tests easier.
ACKs for top commit:
laanwj:
ACK 0c62e3aa73839e97e65a3155e06a98d84b700a1e, checked the CVE numbers, thanks for adding documentation
Tree-SHA512: 3ee05351745193b8b959e4a25d50f25a693b2d24b0732ed53cf7d5882df40b5dd0f1877bd5c69cffb921d4a7acf9deb3cc1160b96dc730d9b5984151ad06b7c9
|
|
|
|
|
|
This commit adds comments referencing multiple CVEs both in production and test code.
CVEs covered in this commit:
CVE-2010-5137
CVE-2010-5139
CVE-2010-5141
CVE-2012-1909
CVE-2012-2459
CVE-2012-3789
CVE-2018-17144
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./test/
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
sed -i -e "s/def bytes_to_hex_str/def b_2_x/g" $(git grep -l bytes_to_hex_str)
export RE_B_0="[^()]*" # match no bracket
export RE_B_1="${RE_B_0}\(${RE_B_0}\)${RE_B_0}" # match exactly one ()
export RE_B_2="${RE_B_0}\(${RE_B_1}\)${RE_B_0}" # match wrapped (())
export RE_M="(b2x|bytes_to_hex_str)\(((${RE_B_0}|${RE_B_1}|${RE_B_2})*)\)"
sed -i --regexp-extended -e "s/${RE_M}/\2.hex()/g" $(git grep -l -E '(b2x|bytes_to_hex_str)')
sed -i --regexp-extended -e "/ +bytes_to_hex_str( as b2x)?,/d" $(git grep -l bytes_to_hex_str)
sed -i --regexp-extended -e "s/ +bytes_to_hex_str( as b2x)?,//g" $(git grep -l bytes_to_hex_str)
sed -i --regexp-extended -e "s/, bytes_to_hex_str( as b2x)?//g" $(git grep -l bytes_to_hex_str)
export RE_M="(binascii\.)?hexlify\(((${RE_B_0}|${RE_B_1}|${RE_B_2})*)\).decode\(${RE_B_0}\)"
sed -i --regexp-extended -e "s/${RE_M}/\2.hex()/g" $(git grep -l hexlify -- ':(exclude)share')
sed -i --regexp-extended -e "/from binascii import hexlify$/d" $(git grep -l hexlify -- ':(exclude)share')
sed -i --regexp-extended -e "s/(from binascii import) .*hexlify/\1 unhexlify/g" $(git grep -l hexlify -- ':(exclude)share')
sed -i -e 's/ignore-names "/ignore-names "b_2_x,/g' ./test/lint/lint-python-dead-code.sh
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
|
|
transaction is actually oversize
29aeed1734 Bugfix: test/functional/mempool_accept: Ensure oversize transaction is actually oversize (Luke Dashjr)
Pull request description:
Simply integer dividing results in an acceptable size if the limit isn't an exact multiple of the input size.
Use math.ceil to ensure the transaction is always oversize.
(This issue can be triggered by changing the address style used.)
Tree-SHA512: e45062b0e8a3e9cb08e9dac5275b68d86e4377b460f1b3b995944090a055b0542a6986826312ec0e223369838094e42e20d8614b5c2bab9975b9a6f749295b21
|
|
actually oversize
Simply integer dividing results in an acceptable size if the limit isn't an exact multiple of the input size.
Use math.ceil to ensure the transaction is always oversize.
|
|
|