| Age | Commit message (Collapse) | Author |
|---|
|
This adds two new constants, MAX_OPS_PER_SCRIPT and
MAX_PUBKEYS_PER_MULTISIG.
|
|
60af755 build: univalue subdir build fixups (Cory Fields)
|
|
Replace literal occurances of the key "prefixes" 'c' and 'b' in txdb.cpp
by the respective constants.
|
|
- Force a rebuild if the headers change
- Only build the lib target
- Clean univalue on 'make clean'
|
|
dcd8e27 Refer to obfuscate_key via pointer in peripheral CLevelDB classes (James O'Beirne)
1488506 Add tests for gettxoutsetinfo, CLevelDBBatch, CLevelDBIterator (James O'Beirne)
0fdf8c8 Handle obfuscation in CLevelDBIterator (James O'Beirne)
3499ce1 Encapsulate CLevelDB iterators cleanly (Pieter Wuille)
|
|
700f52e Clarification of unit test build instructions. (Eric Lombrozo)
|
|
3b1279f build: match upstream build change (Cory Fields)
313e7f5 Squashed 'src/univalue/' changes from 87d9045..5839ac3 (MarcoFalke)
|
|
|
|
|
|
cc @sipa
|
|
Thanks @dexX7.
|
|
To bridge the time until a dynamic method for determining this fee is
merged.
This is especially aimed at the stable releases (0.10, 0.11) because
full mempool limiting, as will be in 0.12, is too invasive and risky to
backport.
|
|
|
|
|
|
b22692c build: Make use of ZMQ_CFLAGS (Cory Fields)
|
|
b2af29b Ignore bench_bitcoin binary. (Pavel Janík)
|
|
|
|
Conflicts:
src/leveldb.cpp
src/leveldb.h
src/txdb.cpp
|
|
|
|
1534d9a Creates unittests for addrman, makes addrman testable. Adds several unittests for addrman to verify it works as expected. Makes small modifications to addrman to allow deterministic and targeted tests. (EthanHeilman)
|
|
b196b68 Test LowS in standardness, removes nuisance malleability vector. (Gregory Maxwell)
|
|
42cb388 Add chainstate obfuscation to avoid spurious antivirus detection (James O'Beirne)
|
|
|
|
Adds an `obfuscate` parameter to `CLevelDBWrapper` and makes use of it
for all new chainstate stores built via `CCoinsViewDB`. Also adds an
`Xor` method to `CDataStream`.
Thanks to @sipa @laanwj @pstratem @dexX7 @KyrosKrane @gmaxwell.
|
|
7072c54 Support very-fast-running benchmarks (Gavin Andresen)
535ed92 Simple benchmarking framework (Gavin Andresen)
|
|
58981d4 Changed logging to make -logtimestamps to work also for -printtoconsole (Arne Brutschy)
|
|
This adds SCRIPT_VERIFY_LOW_S to STANDARD_SCRIPT_VERIFY_FLAGS which
will make the node require the canonical 'low-s' encoding for
ECDSA signatures when relaying or mining.
Consensus behavior is unchanged.
The rational is explained in a81cd96805ce6b65cca3a40ebbd3b2eb428abb7b:
Absent this kind of test ECDSA is not a strong signature as given
a valid signature {r, s} both that value and {r, -s mod n} are valid.
These two encodings have different hashes allowing third parties a
vector to change users txids. These attacks are avoided by picking
a particular form as canonical and rejecting the other form(s); in
the of the LOW_S rule, the smaller of the two possible S values is
used.
If widely deployed this change would eliminate the last remaining
known vector for nuisance malleability on boring SIGHASH_ALL
p2pkh transactions. On the down-side it will block most
transactions made by sufficiently out of date software.
Unlike the other avenues to change txids on boring transactions this
one was randomly violated by all deployed bitcoin software prior to
its discovery. So, while other malleability vectors where made
non-standard as soon as they were discovered, this one has remained
permitted. Even BIP62 did not propose applying this rule to
old version transactions, but conforming implementations have become
much more common since BIP62 was initially written.
Bitcoin Core has produced compatible signatures since a28fb70e in
September 2013, but this didn't make it into a release until 0.9
in March 2014; Bitcoinj has done so for a similar span of time.
Bitcoinjs and electrum have been more recently updated.
This does not replace the need for BIP62 or similar, as miners can
still cooperate to break transactions. Nor does it replace the
need for wallet software to handle malleability sanely[1]. This
only eliminates the cheap and irritating DOS attack.
[1] On the Malleability of Bitcoin Transactions
Marcin Andrychowicz, Stefan Dziembowski, Daniel Malinowski, Łukasz Mazurek
http://fc15.ifca.ai/preproceedings/bitcoin/paper_9.pdf
|
|
Previously only one PUSHDATA was allowed, needlessly limiting
applications such as matching OP_RETURN contents with bloom filters that
operate on a per-PUSHDATA level. Now any combination that passes
IsPushOnly() is allowed, so long as the total size of the scriptPubKey
is less than 42 bytes. (unchanged modulo non-minimal PUSHDATA encodings)
Also, this fixes the odd bug where previously the PUSHDATA could be
replaced by any single opcode, even sigops consuming opcodes such as
CHECKMULTISIG. (20 sigops!)
|
|
Allows IsPushOnly() to be applied to just part of the script for
OP_RETURN outputs.
|
|
Previously unlike other transaction types the TX_SCRIPTHASH would not
clear vSolutionsRet, which means that unlike other transaction types if
it was called twice in a row you would get the result of the previous
invocation as well.
|
|
95acf3c remove $(@F) and subdirs from univalue make (Jonas Schnelli)
9623e93 [Univalue] add univalue over subtree (Jonas Schnelli)
2f9f082 Squashed 'src/univalue/' content from commit 87d9045 (Jonas Schnelli)
0917306 remove univalue, prepare for subtree (Jonas Schnelli)
|
|
|
|
e761d7a Bugfix: Allow mining on top of old tip blocks for testnet (fixes testnet-in-a-box use case) (Luke Dashjr)
|
|
|
|
835c122 Clean up change computation in CreateTransaction. (Daniel Kraft)
|
|
similar to secp256k1 include and compile univalue over a subtree
|
|
|
|
|
|
|
|
Avoid calling gettimeofday every time through the benchmarking loop, by keeping
track of how long each loop takes and doubling the number of iterations done
between time checks when they take less than 1/16'th of the total elapsed time.
|
|
Benchmarking framework, loosely based on google's micro-benchmarking
library (https://github.com/google/benchmark)
Wny not use the Google Benchmark framework? Because adding Even More Dependencies
isn't worth it. If we get a dozen or three benchmarks and need nanosecond-accurate
timings of threaded code then switching to the full-blown Google Benchmark library
should be considered.
The benchmark framework is hard-coded to run each benchmark for one wall-clock second,
and then spits out .csv-format timing information to stdout. It is left as an
exercise for later (or maybe never) to add command-line arguments to specify which
benchmark(s) to run, how long to run them for, how to format results, etc etc etc.
Again, see the Google Benchmark framework for where that might end up.
See src/bench/MilliSleep.cpp for a sanity-test benchmark that just benchmarks
'sleep 100 milliseconds.'
To compile and run benchmarks:
cd src; make bench
Sample output:
Benchmark,count,min,max,average
Sleep100ms,10,0.101854,0.105059,0.103881
|
|
d76a8ac use CBlockIndex* insted of uint256 for UpdatedBlockTip signal (Jonas Schnelli)
|
|
43edd51 SanitizeString: Allow hypen char (MarcoFalke)
|
|
testnet-in-a-box use case)
|
|
a5b78c2 build: Remove dependency of bitcoin-cli on secp256k1 (Wladimir J. van der Laan)
|
|
|
|
9fea833 timedata: Prevent warning overkill (Wladimir J. van der Laan)
|
|
This makes sure that the event loop eventually terminates, even if an
event (like an open timeout, or a hanging connection) happens to be
holding it up.
|
|
Add a WaitExit() call to http's WorkQueue to make it delete the work
queue only when all worker threads stopped.
This fixes a problem that was reproducable by pressing Ctrl-C during
AppInit2:
```
/usr/include/boost/thread/pthread/condition_variable_fwd.hpp:81: boost::condition_variable::~condition_variable(): Assertion `!ret' failed.
/usr/include/boost/thread/pthread/mutex.hpp:108: boost::mutex::~mutex(): Assertion `!posix::pthread_mutex_destroy(&m)' failed.
```
I was assuming that `threadGroup->join_all();` would always have been
called when entering the Shutdown(). However this is not the case in
bitcoind's AppInit2-non-zero-exit case "was left out intentionally
here".
|
|
Shutting down the HTTP server currently breaks off all current requests.
This can create a race condition with RPC `stop` command, where the calling
process never receives confirmation.
This change removes the listening sockets on shutdown so that no new
requests can come in, but no longer breaks off requests in progress.
Meant to fix #6717.
|
