| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
tx_valid.json
18be3ab139 Adding test case for SINGLE|ANYONECANPAY hash type in tx_valid.json (Chris Stewart)
Pull request description:
We are missing a test vector for SINGLE|ANYONECANPAY inside of tx_valid.json. This addresses the issue #12060
Tree-SHA512: e3526113477dbf575c4a844cf489dcfa2c037c6d928af6f97413edc1a8d29cdf2143da96471cdfd3de08bf5ed178117ed67926fd70fd42ca391ac0bb0d08f3fd
|
|
New global variables were introduced in #11403 and not setting them causes:
test_bitcoin: wallet/wallet.cpp:4199: CTxDestination GetDestinationForKey(const CPubKey&, OutputType): Assertion `false' failed.
unknown location(0): fatal error in "ListCoins": signal: SIGABRT (application abort requested)
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/ListCoins
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
|
|
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
|
|
|
|
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
|
|
Make CKeyStore automatically known about the redeemscripts necessary for P2SH-P2WPKH
(and due to the extra checks in IsMine, also P2WPKH) spending.
|
|
|
|
|
|
addresses
73041c3c99 RPC Docs: addmultisigaddress is intended for non-watchonly addresses (Gregory Sanders)
Pull request description:
Spent a couple hours debugging why my p2sh watchonly funds were not appearing in various accounting calls when address was imported via `addmultisigaddress`.
Tree-SHA512: 0673e276e5ca8cdc4c9357bd835a29bd5a994520a78179600944932c700917142930288bf179f5e89b0874beaf1a88bd70129f3a297a46df42a10bab847017bb
|
|
Replaces numbered place marker %2 with %1, because the QString::arg() member function is called once on the string used to create the QString object.
|
|
c99a3c32c8 [tests] util_tests.cpp: actually check ignored args (Anthony Towns)
Pull request description:
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
Tree-SHA512: 7b81fde49742e524f1bb67e2ec084f5909ae36125f237f0210df4587c62e5a5a8f277f13543f0a85ad145c4bb80d62339a7d50d7ed41659df318c8198ea7f428
|
|
updating help
aad3090 [rpc] Adding ::minRelayTxFee amount to getmempoolinfo and updating mempoolminfee help description (Jeff Rade)
Pull request description:
These are RPC document changes from #11475 which is now merged. Took into consideration comments from #11475 and #6941 for this PR.
Biggest change here is when calling `getmempoolinfo`, will now show the `minrelaytxfee` in the JSON reponse (see below):
```
$ bitcoin-cli getmempoolinfo
{
"size": 50,
"bytes": 13102,
"usage": 70480,
"maxmempool": 300000000,
"mempoolminfee": 0.00001000,
"minrelaytxfee": 0.00001000
}
```
Fixes #8953
Tree-SHA512: 5ca583961365ee1cfe6e0d19afb0b41d542e179efee3b3c5f3fcf7d3ebca9cc3eedfd1434a0da40c5eed84fba98b35646fda201e6e61c689b58bee9cbea44b9e
|
|
ebcee1de2 bips: add bip176 (Bits Denomination) (William Casarin)
275b2eeed [qt] change µBTC to bits (William Casarin)
Pull request description:
Now that we have bip176, change "µBTC" to the more colloquial "bits"
Tree-SHA512: eba5e5f89c392728a4f0a3bd81a9779a117b8d72a490390fd031d4e7cc56c2bfee0016aba7ef9535903e8cf2262ce46497283424e378906d0e3bf5b0d2d981c7
|
|
6dda059bd [qt] Simplifies boolean expression model && model->haveWatchOnly() (251)
Pull request description:
This PR optimizes the boolean expression `model && model->haveWatchOnly()` to `model->haveWatchOnly()`.
The boolean expression can be optimized because the method `TransactionView::exportClicked` already guards against a potential dereferenced null pointer by returning early if `model` is null.
https://github.com/bitcoin/bitcoin/blob/63a4dc10876bfc61c2e87d35dcf17da2f0f8c316/src/qt/transactionview.cpp#L351-L353
Tree-SHA512: 8bdd0d05bf879745fa39d3ca7524471720ae08ceee9427d5a08776e7b56d18542ae87a6991cd6779e232305f504fdfc77223702b72ecbe231f5f5e98453456dd
|
|
|
|
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
|
|
This adds new fields 'pubkeys' and 'embedded' to the RPC's output, and improves the
documentation for previously added 'witness_version' and 'witness_program' fields.
|
|
|
|
|
|
|
|
in 2017
595a7ba Increment MIT Licence copyright header year on files modified in 2017 (Akira Takizawa)
Pull request description:
Edited via:
$ contrib/devtools/copyright_header.py update .
ps) It is the same commit as #9450
Tree-SHA512: 274bfcd6cf2914315ed52f6db773a68800ce9d6bd225a3142654483f0bbc3fd865009e62f9d954f65765d038c626e55d2a64e37e16843809adc2f67abe659b6d
|
|
|
|
This commit removes the escaped backslash and quote characters from the keys in the JSON object to make it a plain JSON object.
|
|
|
|
The boolean expression model && model->haveWatchOnly() can be simplified to model->haveWatchOnly(), because if (!model || !model->getOptionsModel()) { return; } guards against a potential dereferenced null pointer.
|
|
mempoolminfee help description
|
|
97d2b09c12 Add helper to wait for validation interface queue to catch up (Matt Corallo)
36137497f1 Block ActivateBestChain to empty validationinterface queue (Matt Corallo)
5a933cefcc Add an interface to get the queue depth out of CValidationInterface (Matt Corallo)
a99b76f269 Require no cs_main lock for ProcessNewBlock/ActivateBestChain (Matt Corallo)
a734896038 Avoid cs_main in net_processing ActivateBestChain calls (Matt Corallo)
66aa1d58a1 Refactor ProcessGetData in anticipation of avoiding cs_main for ABC (Matt Corallo)
818075adac Create new mutex for orphans, no cs_main in PLV::BlockConnected (Matt Corallo)
Pull request description:
This should fix #11822.
It ended up bigger than I hoped for, but its not too gnarly. Note that "
Require no cs_main lock for ProcessNewBlock/ActivateBestChain" is mostly pure code-movement.
Tree-SHA512: 1127688545926f6099449dca6a4e6609eefc3abbd72f1c66e03d32bd8c7b31e82097d8307822cfd1dec0321703579cfdd82069cab6e17b1024e75eac694122cb
|
|
* Now that we have bip176, change "µBTC" to the more colloquial "bits"
* We retain the `µBTC (bits)` description in dropdowns and status bars.
The more concise "bits" is used when appended to numbers.
Signed-off-by: William Casarin <jb55@jb55.com>
|
|
|
|
|
|
|
|
This requires the removal of some very liberal (incorrect) cs_mains
sprinkled in some tests. It adds some chainActive.Tip() races, but
the tests are all single-threaded anyway.
|
|
|
|
|
|
760af84 Removed CCheckQueueSpeed benchmark (Martin Ankerl)
00721e6 Improved microbenchmarking with multiple features. (Martin Ankerl)
Pull request description:
The benchmark's KeepRunning() used to make a function call for each call, inflating measurement times for short running code. This change inlines the critical code that is executed each run and moves the slow timer updates into a new function.
This change increases the average runtime for Trig from 0.000000082339208 sec to 0.000000080948591.
Tree-SHA512: 36b3bc55fc9b1d4cbf526b7103af6af18e9783e6b8f3ad3adbd09fac0bf9401cfefad58fd1e6fa2615d3c4e677998f912f3323d61d7b00b1c660d581c257d577
|
|
3e1ee31 [Tests] Adding unit tests for GetDifficulty in blockchain.cpp. (sean)
Pull request description:
blockchain.cpp has low unit test coverage. This commit is intended
to start improving its code coverage to reasonable levels. One or more
follow up commits will complete the task that this commit is starting
(though the usefulness of this commit is not dependent upon later
commits).
Note that these tests were not written based upon a specification of how
GetDifficulty *should* work, but rather how it actually *does* work. As
a result, if there are any bugs in the current GetDifficulty
implementation, these unit tests serve to lock them in rather than
expose them.
-- Why has blockchain.cpp been modified if this is a unit testing change?
Since the existing GetDifficulty function relies on a global variable,
chainActive, it was not suitable for unit testing purposes. Both the
existing GetDifficulty function and the unit tests now call through to
a new, more modular version of GetDifficulty that can work on any chain,
not just chainActive.
-- Why does blockchain_tests.cpp directly include blockchain.cpp instead
of blockchain.h?
While the new GetDifficulty function's signature is arguably better than
the old one's, it still isn't great, and doesn't seem to warrant inclusion
as part of the blockchain.h API, especially since only test code is
directly using it. If a better way of exposing the new GetDifficulty
function to unit tests exists, please mention it and the commit will be
updated accordingly.
-- Why is the test fixture named blockchain_difficulty_tests rather than
blockchain_tests?
The Bitcoin Core policy for naming unit test files is to match the the
file under test ("blockchain" becomes "blockchain_tests"). While this
commit complies with that, blockchain.cpp is a massive file, such that
having all of the unit tests in one file will tend towards disorder.
Since there will be a lot more tests added to this file, the intention
is to divide up different types of tests into different test fixtures
within the same file.
Tree-SHA512: a7dda9c2a9414d4819b4d2911f5637891dc19cecbecfc1463846161d2a78793151927a5ab911c69a5d3013f7668e75a1d78a65667cb9d83910cda439cbe84d62
|
|
This benchmark's runtime was rather unpredictive on different machines, not really a useful benchmark.
|
|
* inline performance critical code
* Average runtime is specified and used to calculate iterations.
* Console: show median of multiple runs
* plot: show box plot
* filter benchmarks
* specify scaling factor
* ignore src/test and src/bench in command line check script
* number of iterations instead of time
* Replaced runtime in BENCHMARK makro number of iterations.
* Added -? to bench_bitcoin
* Benchmark plotly.js URL, width, height can be customized
* Fixed incorrect precision warning
|
|
149dffd [rpc] mempoolinfo should take ::minRelayTxFee into account (Cristian Mircea Messel)
Pull request description:
Fixes #6941 following https://github.com/bitcoin/bitcoin/pull/11410#issuecomment-332991078 's suggestion
This takes care of the mentioned ticket without changing the behavior of https://github.com/bitcoin/bitcoin/pull/11410/files#diff-24efdb00bfbe56b140fb006b562cc70bL629
By modifying https://github.com/bitcoin/bitcoin/blob/5a9da37fb3f4b53f556e1d46509b94dc3c661d75/src/txmempool.cpp#L984 the syncing mempools becomes problematic as per https://github.com/bitcoin/bitcoin/pull/11410#issuecomment-333868390
~~Same code causes different tests to fail: https://travis-ci.org/bitcoin/bitcoin/jobs/286128241 https://travis-ci.org/bitcoin/bitcoin/jobs/286128241 . I can't reproduce the problems locally, am I doing something wrong?~~ travis sometimes fails unexpectedly
Tree-SHA512: fd81628da6a3eff51bd09e5342d781bac0710f79d6b330b1df3662756ecaceb2e1682bf9768b5f8edbcba6479a3223dfa6604d37c9e9d37d00d077172da4f6ea
|
|
5cbbbd7 [Wallet] Use RBF by default in QT only (Sjors Provoost)
Pull request description:
~If there are no objections, this would supersede #11556.~
Enabling RBF by default avoids the need to explain all possible use cases of RBF.
This PR does not change the default RPC wallet behavior, as this could break implementations that depend on it and it's not clear what happens when automated services suddenly switch on RBF on a large scale.
After trying various approaches, we settled on just having QT ignore `-walletrbf`.
Send screen:
<img width="388" alt="send" src="https://user-images.githubusercontent.com/10217/34251097-329c8dee-e63f-11e7-9e14-d7f55d2b52cc.png">
Confirmation screen by default (with RBF):
<img width="429" alt="rbf yes" src="https://user-images.githubusercontent.com/10217/32442799-f50d54aa-c2fc-11e7-9392-96339d0f1f74.png">
Confirmation screen without RBF:
<img width="431" alt="rf no" src="https://user-images.githubusercontent.com/10217/32442793-ef30bc34-c2fc-11e7-8ca2-e86a97175278.png">
Tree-SHA512: 53efb5d277144478143e69dcae8112c1b9c2beb981fdd0fe778592e5f7d5bf838f73d48052ead874586a75b944e8af469b25e5f376c135cf48cc3598e77f5891
|
|
GUI wallet uses RBF by default, regardless of -walletrbf.
RPC and debug console in the GUI remain unchanged; they don't
use RBF by default, unless launched with -walletrbf=1.
|
|
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes #11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
|
|
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
|
|
63179d0 Scope the ECDSA constant sizes to CPubKey / CKey classes (Jack Grigg)
1ce9f0a Ensure that ECDSA constant sizes are correctly-sized (Jack Grigg)
48abe78 Remove redundant `= 0` initialisations (Jack Grigg)
17fa391 Specify ECDSA constant sizes as constants (Jack Grigg)
e4a1086 Update Debian copyright list (Jack Grigg)
e181dbe Add comments (Jack Grigg)
a3603ac Fix potential overflows in ECDSA DER parsers (Jack Grigg)
Pull request description:
Mostly trivial, but includes fixes to potential overflows in the ECDSA DER parsers.
Cherry-picked from Zcash PR https://github.com/zcash/zcash/pull/2335
Tree-SHA512: 8fcbd51b0bd6723e5d33fa5d592f7cb68ed182796a9b837ecc8217991ad69d6c970258617dc00eb378c8caa4cec5d6b304d9d2c066acd40cda98e4da68e0caa4
|
|
f455a24 [net] add seed.testnet.bitcoin.sprovoost.nl to testnet DNS seeds (Sjors Provoost)
Pull request description:
I tested it myself by:
* `dig seed.testnet.bitcoin.sprovoost.nl` (should have propagated by now, but if you only see two records with `A 66.111... ` try again later)
* deleting the other seeds and all data in `.../testnet3`, recompiling and then starting the node. Log shows `21 addresses found from DNS seeds`.
ACK https://github.com/bitcoin/bitcoin/blob/master/doc/dnsseed-policy.md
I'm willing to keep it up and running at least throughout 2018, unless something bad happens.
About my setup:
* Amazon EC2 instance in Europe, running Ubuntu 16.04; I use this instance for some other chores, but only port 53 is world reachable (for mainnet I'd probably run a dedicated instance, and perhaps a location I have physical control over)
* running [sipa/bitcoin-seeder](https://github.com/sipa/bitcoin-seeder) with default settings (and the non-root port redirect)
* feedback about my domain / DNS setup is welcome, I can provide more details via private email
I can use guidance on _Any hosting services contracted by the operator are equally expected to uphold these expectations_. Although I assume the requirements for testnet are less strict than for mainnet, in case I want to pursue the latter in the future: what unpleasant things can Amazon, my domain registrar and other intermediaries do? How would I mitigate that?
Also note that The Netherlands passed some pretty onerous legislation creating uncertainty over what the secret service can compel people like myself to do. However these laws won't take effect before mid 2018, there's probably more interesting targets than myself to go after, and it's easier for them to just monitor all unencrypted P2P traffic everywhere, or monitor some intermediary I depend on.
Any good tools for monitoring uptime?
Tree-SHA512: 386fe688e5006ab8352d93ab3954fc07dc566876ae002891baa51acfaa5bb113f51b1f5ca08c7394a530b10a2f5008c56d57153af3ed07544a305586dda06b97
|
|
2862b56 [tests] remove redundant univalue_tests.cpp (John Newbery)
Pull request description:
univalue unit tests were added in #4730 , and exist at `/src/test/univalue_tests.cpp` (outside the univalue tree). That test was brought into the univalue repository in https://github.com/bitcoin-core/univalue/pull/4 , which was pulled into the github repository in https://github.com/bitcoin/bitcoin/pull/11420.
That means that the univalue test exists in two places:
1. `/src/test/univalue_tests.cpp`
2. `/src/univalue/test/object.cpp`
(2) is a strict superset of (1). It adds some macros to work around boost not being a univalue dependency, and adds a few extra lines of test.
Therefore remove `/src/test/univalue_tests.cpp`
Tree-SHA512: 3747b10bbf62e9f12363905488b29945ad559ddca68c5c03d8a362de612a51f408f41a04d3712c6889bfc1632fb1a5fa0d7df0fbf02c322b3981a6d698f501b0
|
|
88411e9 Squashed 'src/univalue/' changes from fe805ea74f..07947ff2da (MarcoFalke)
Pull request description:
Pulls in the test changes to the univalue subtree.
Beside looking at the code, reviewers should refer to https://github.com/bitcoin/bitcoin/blob/master/contrib/devtools/README.md#git-subtree-checksh on how to verify the subtree pull.
Tree-SHA512: 09493625a573dca1140570326ee90c1bb84e4893e1dab2cdd51bc23ae1fba1e33c43ed771ca9e112ac71b0242e8a8d058071334562c738d502587eadd5a0f114
|
|
|
