| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Only if -changetype is not set and -addresstype is not "legacy".
|
|
When launched with -adresstype=legacy the checkbox will be hidden.
|
|
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
|
|
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
|
|
|
|
|
|
(bool, char, etc.)
99ba0c3 Don't use pass by reference to const for cheaply-copied types (bool, char, etc.). (practicalswift)
Pull request description:
Don't use pass by reference to const for cheaply-copied types (`bool`, `char`, etc.).
Tree-SHA512: ccad5e2695dff0b3d6de3e713ff3448f2981168cdac72d73bee10ad346b9919d8d4d588933369e54657a244b8b222fa0bef919bc56d983e1fa64b2004e51b225
|
|
Suggested by Matt Corallo <git@bluematt.me>
https://github.com/bitcoin/bitcoin/pull/11403#discussion_r155599383
Combining the maps was probably never a good arrangement but is more
problematic now in presence of WitnessV0ScriptHash and WitnessV0KeyHash types.
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
|
|
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
|
|
This avoid calling out to mempool state during coin selection,
balance calculation, etc. In the next commit we ensure all wallet
callbacks from CValidationInterface happen in the same queue,
serialized with each other. This helps to avoid re-introducing one
of the issues described in #9584 [1] by further disconnecting
wallet from current chain/mempool state.
Thanks to @morcos for the suggestion to do this.
Note that there are several race conditions introduced here:
* If a user calls sendrawtransaction from RPC, adding a
transaction which is "trusted" (ie from them) and pays them
change, it may not be immediately used by coin selection until
the notification callbacks finish running. No such race is
introduced in normal transaction-sending RPCs as this case is
explicitly handled.
* Until Block{Connected,Disconnected} and
TransactionAddedToMempool calls also run in the CSceduler
background thread, there is a race where
TransactionAddedToMempool might be called after a
Block{Connected,Disconnected} call happens.
* Wallet will write a new best chain from the SetBestChain
callback prior to having processed the transaction from that
block.
[1] "you could go to select coins, need to use 0-conf change, but
such 0-conf change may have been included in a block who's
callbacks have not yet been processed - resulting in thinking they
are not in mempool and, thus, not selectable."
|
|
This blocks until the wallet has synced up to the current height.
|
|
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
|
|
|
|
A C-style cast is equivalent to try casting in the following order:
1. const_cast(...)
2. static_cast(...)
3. const_cast(static_cast(...))
4. reinterpret_cast(...)
5. const_cast(reinterpret_cast(...))
By using static_cast<T>(...) explicitly we avoid the possibility
of an unintentional and dangerous reinterpret_cast. Furthermore
static_cast<T>(...) allows for easier grepping of casts.
|
|
|
|
713a92073 Remove usehd option and warn when it is used (Andrew Chow)
d4c18f733 Bump wallet version number to 159900 (Andrew Chow)
Pull request description:
Bump the wallet version number to 159900 so that new wallets made without a default key will no longer work on previous versions at all. Also remove the `usehd` option to avoid weird interaction with wallet version numbers and HD-ness of wallets.
Tree-SHA512: dd7965505bfad6a926c79afd423236f509229a398a8398076f8d57d90a5974243f9459a61225c4daee560c796f427445c9e55a3ad528a3a97a9123ca6a1269ab
|
|
|
|
|
|
f01103c MOVEONLY: Init functions wallet/wallet.cpp -> wallet/init.cpp (Russell Yanofsky)
e7fe320 MOVEONLY: Fee functions wallet/wallet.cpp -> wallet/fees.cpp (Russell Yanofsky)
d97fe20 Move some static functions out of wallet.h/cpp (Russell Yanofsky)
Pull request description:
This just moves some static wallet fee and init functions out of `wallet/wallet.cpp` and into new `wallet/fees.cpp` and `wallet/init.cpp` source files. There is one commit updating declarations and callers, followed by two MOVEONLY commits actually moving the function bodies.
This change is desirable because wallet.h/cpp are monolithic and hard to navigate, so pulling things out and grouping together pieces of related functionality should improve the organization.
Another motivation is the wallet process separation work in https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially) parameter parsing and fee estimation are still done in the main process rather than the wallet process, and having functions that run in different processes scrambled up throughout wallet.cpp is unnecessarily confusing.
Tree-SHA512: 6e6982ff82b2ab4e681c043907e2b1801ceb9513394730070f16c46ad338278a863f5b3759aa13db76a259b268b1c919c81f4e339f0796a3cfb990161e8c316d
|
|
40a0f9f Enable devirtualization opportunities by using the final specifier (C++11) (practicalswift)
9a1675e optim: mark a few classes final (Cory Fields)
Pull request description:
Using gcc's ```-Wsuggest-final-types``` and lto, I identified a few easy devirtualization wins:
> wallet/wallet.h:651:7: warning: Declaring type 'struct CWallet' final would enable devirtualization of 26 calls [-Wsuggest-final-types]
>coins.h:201:7: warning: Declaring type 'struct CCoinsViewCache' final would enable devirtualization of 13 calls [-Wsuggest-final-types]
>txdb.h:67:7: warning: Declaring type 'struct CCoinsViewDB' final would enable devirtualization of 5 calls [-Wsuggest-final-types]
>zmq/zmqnotificationinterface.h:16:7: warning: Declaring type 'struct CZMQNotificationInterface' final would enable devirtualization of 4 calls [-Wsuggest-final-types]
>httpserver.cpp:42:7: warning: Declaring type 'struct HTTPWorkItem' final would enable devirtualization of 2 calls [-Wsuggest-final-types]
Tree-SHA512: 2a825fd27121ccabaacff5cde2fc8a50d1b4cc846374606caa2a71b0cd8fcb0d3c9b5b3fd342d944998610e2168048601278f8a3709cc515191a0bb2d98ba782
|
|
e53615b Remove vchDefaultKey and have better first run detection (Andrew Chow)
Pull request description:
Removes vchDefaultKey which was only used for first run detection. Improves wallet first run detection by checking to see if any keys were read from the database.
This also fixes a (rather contrived) case where an encrypted non-HD wallet has corruption such that the default key is no longer valid and is loaded into a Core version that supports HD wallets. This causes a runtime exception since a new hd master key is generated as the software believes the wallet file is newly created but cannot add the generated key to the wallet since it is encrypted. I was only able to replicate this error by creating a non-hd wallet, encrypting it, then editing the wallet using `db_dump` and `db_load` before loading the wallet with hd enabled. This problem has been reported by [two](https://bitcointalk.org/index.php?topic=1993244.0) [users](https://bitcointalk.org/index.php?topic=1746976.msg17511261#msg17511261) so it is something that can happen, although that raises the question of "what corrupted the default key".
~P.S. I don't know what's up with the whitespace changes. I think my text editor is doing something stupid but I don't think those are important enough to attempt undoing them.~ Undid those
Tree-SHA512: 63b485f356566e8ffa033ad9b7101f7f6b56372b29ec2a43b947b0eeb1ada4c2cfe24740515d013aedd5f51aa1890dfbe499d2c5c062fc1b5d272324728a7d55
|
|
67ceff4 [wallet] Add logging to MarkReserveKeysAsUsed (John Newbery)
1221f60 [wallet] Remove keypool_topup_cleanups (John Newbery)
Pull request description:
A couple of minor cleanups suggested by @ryanofsky here: https://github.com/bitcoin/bitcoin/pull/11022#pullrequestreview-55598940
Does not affect functionality. Not required for v0.15.
Tree-SHA512: d8d0698fd26ea49a4157e68669d5511095760c3a1ecfa3f917e3f273efbafb55c51a202d677614216eae3f796b6e8d17506b2ec2d4799a94f18981b396e65eec
|
|
Unused function. Mostly reverts c25d90f125d69e33688288eff439eb7be75012e9
c25d90f... was merged as part of PR 11022 but is not required.
|
|
In order to avoid unintended implicit conversions.
|
|
Removes vchDefaultKey which was only used for first run detection.
Improves wallet first run detection by checking to see if any keys
were read from the database.
This will now also check for a valid defaultkey for backwards
compatibility reasons and to check for any corruption.
Keys will stil be generated on the first one, but there won't be
any shown in the address book as was previously done.
|
|
etc.).
|
|
This commit just moves a few function declarations and updates callers.
Function bodies are moved in two followup MOVEONLY commits.
This change is desirable because wallet.h/cpp are monolithic and hard to
navigate, so pulling things out and grouping together pieces of related
functionality should improve the organization.
Another proximate motivation is the wallet process separation work in
https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially)
parameter parsing and fee estimation are still done in the main process rather
than the wallet process, and having functions that run in different processes
scrambled up throughout wallet.cpp is unnecessarily confusing.
|
|
pointer literal instead of the macro NULL
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
|
|
d34957e [wallet] [tests] Add keypool topup functional test (Jonas Schnelli)
095142d [wallet] keypool mark-used and topup (John Newbery)
c25d90f [wallet] Add HasUnusedKeys() helper (John Newbery)
f2123e3 [wallet] Cache keyid -> keypool id mappings (John Newbery)
83f1ec3 [wallet] Don't hold cs_LastBlockFile while calling setBestChain (John Newbery)
2376bfc [wallet] [moveonly] Move LoadKeyPool to cpp (Matt Corallo)
cab8557 [wallet] [moveonly] Move CAffectedKeysVisitor (Jonas Schnelli)
Pull request description:
This PR contains the first part of #10882 :
- if a key from the keypool is used, mark all keys up to that key as used, and then try to top up the keypool
- top up the keypool on startup
Notably, it does not stop the node or prevent the best block from advancing if the keypool drops below a threshold (which means that transactions may be missed and funds lost if restoring from an old HD wallet backup).
Tree-SHA512: ac681fefeaf7ec2aab2fa1da93d12273ea80bd05eb48d7b3b551ea6e5d975dd97ba7de52b7fba52993823280ac4079cc36cf78a27dac708107ebf8fb6326142b
|
|
This commit adds basic keypool mark-used and topup:
- try to topup the keypool on initial load
- if a key in the keypool is used, mark all keys before that as used and
try to top up
|
|
instead of the macro NULL
-BEGIN VERIFY SCRIPT-
sed -i 's/\<NULL\>/nullptr/g' src/*.cpp src/*.h src/*/*.cpp src/*/*.h src/qt/*/*.cpp src/qt/*/*.h src/wallet/*/*.cpp src/wallet/*/*.h src/support/allocators/*.h
sed -i 's/Prefer nullptr, otherwise SAFECOOKIE./Prefer NULL, otherwise SAFECOOKIE./g' src/torcontrol.cpp
sed -i 's/tor: Using nullptr authentication/tor: Using NULL authentication/g' src/torcontrol.cpp
sed -i 's/METHODS=nullptr/METHODS=NULL/g' src/test/torcontrol_tests.cpp src/torcontrol.cpp
sed -i 's/nullptr certificates/NULL certificates/g' src/qt/paymentserver.cpp
sed -i 's/"nullptr"/"NULL"/g' src/torcontrol.cpp src/test/torcontrol_tests.cpp
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
|
|
|
|
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
|
|
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This could be particularly nasty in some use-cases (especially
pre-HD-split) - eg a user might fundrawtransaction, then call
getnewaddress, hand out the address for someone to pay them, then
sendrawtransaction. This may result in the user thinking they have
received payment, even though it was really just their own change!
This could obviously result in needless key-reuse.
|
|
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change).
|
|
This fixes an issue where you could reserve a keypool entry, then
top up the keypool, writing out a new key at the given index, then
return they key from the pool. This isnt likely to cause issues,
but given there is no reason to ever re-use keypool indexes
(they're 64 bits...), best to avoid it alltogether.
|
|
* Declaring CCoinsViewErrorCatcher final enables devirtualization of two calls
* Declaring CReserveKey final enables devirtualization of one call
|
|
|
|
increase keypool size.
b0e8e2d Print one log message per keypool top-up, not one per key. (Gregory Maxwell)
41dc163 Increase wallet default keypool size to 1000. (Gregory Maxwell)
30d8f3a Pushdown walletdb though CWallet::AddKeyPubKey to avoid flushes. (Gregory Maxwell)
3a53f19 Pushdown walletdb object through GenerateNewKey/DeriveNewChildKey. (Gregory Maxwell)
Pull request description:
This carries the walletdb object from top-up through GenerateNewKey/DeriveNewChildKey/CWallet::AddKeyPubKey, which allows us to avoid the flush on destruction until the top up finishes instead of flushing the wallet for every key.
This speeds up adding keys by well over 10x on my laptop (actually something like 17x), I wouldn't be surprised if it were an even bigger speedup on spinning rust.
Then it increases the keypool size to 1000. I would have preferred to use 10,000 but in the case where the user creates a new wallet and then turns on encryption it seems kind of dumb to have >400KB of marked-used born unencrypted keys just laying around.
(Thanks to Matt for cluesticking me on how to bypass the crypter spaghetti)
Tree-SHA512: 868303de38fce4c3f67d7fe133f765f15435c94b39d252d7450b5fee5c607a3cc2f5e531861a69d8c8877bf130e0ff4c539f97500a6bc0ff6d67e4a42c9385c7
|
|
|
|
This prevents the wallet from being flushed between each and
every key during top-up. This results in a >10x speed-up
for the top-up.
|
|
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
|
