| Age | Commit message (Collapse) | Author |
|---|
|
Instead turning tx.vout into a vector of `CRecipient`, make `FundTransaction`
take a `CRecipient` vector directly. This allows us to remove SFFO logic from
the wrapper RPC `FundTransaction` since the `CRecipient` objects have already
been created with the correct SFFO values. This also allows us to remove
SFFO from both `FundTransaction` function signatures.
This sets us up in a future PR to be able to use these RPCs with BIP352
static payment codes.
|
|
Since #25273, the behavior of 'inserting change at a random
position' is instructed by passing std::nullopt instead of -1.
Also, added missing documentation about the meaning of
'change_pos=std::nullopt' inside 'CWallet::CreateTransaction()'
|
|
Instead of using the output parameters, return CreatedTransactionResult
from FundTransaction in the same way that CreateTransaction does.
Additionally, instead of modifying the original CMutableTransaction, the
result from CreateTransactionInternal is used.
|
|
Instead of making -1 a magic number meaning no change or random change
position, use an optional to have that meaning.
|
|
At the end of coin selection reduce the fees by the difference between
the individual bump fee estimates and the collective bump fee estimate.
|
|
The previous behavior for getAvailableBalance when coin control
has selected coins was to return the sum of them. Instead, we
are currently returning the wallet's available total balance minus
the selected coins total amount.
This turns into a GUI-only issue for the "use available balance"
button when the user manually select coins in the send screen.
Reason:
We missed to update the GetAvailableBalance function to include
the coin control selected coins on #25685.
Context:
Since #25685 we skip the selected coins inside `AvailableCoins`,
the reason is that there is no need to traverse the wallet's
txes map just to get coins that can directly be fetched by
their id.
|
|
we only need the "include unsafe" flag, not all what coin
control stores.
|
|
Optimizes coin selection by performing the "group outputs"
procedure only once, outside the "attempt selection" process.
Avoiding the repeated execution of the 'GroupOutputs' operation
that occurs on each coin eligibility filters (up to 8 of them);
then for every coin vector type plus one for all the coins together.
This also let us not perform coin selection over coin eligibility
filtered groups that don't add new elements.
(because, if the previous round failed, and the subsequent one has
the same coins, then this new round will fail again).
|
|
The 'GroupOutputs()' function performs the same
calculations for only-positive and mixed groups,
the only difference is that when we look for
only-positive groups, we discard negative utxos.
So, instead of wasting resources calling GroupOutputs()
for positive-only first, then call it again to include
the negative ones in the result, we can execute
GroupOutputs() only once, including in the response
both group types (positive-only and mixed).
|
|
Another step towards the single OutputGroups calculation goal
|
|
Initial steps towards sharing COutput instances across all possible
OutputGroups (instead of copying them time after time).
|
|
When producing a dummy signature for the purpose of estimating the transaction fee, do not assume an external signer performs R-value grinding on the signature.
In particular, this avoids a scenario where the fee rate is 1 sat / vbyte and a transaction with a 72 byte signature is not accepted into our mempool.
This commit also drops the nullptr default for CCoinControl arguments for functions that it touches. This is because having a boolean argument right next to an optional pointer is error prone.
Co-Authored-By: S3RK <1466284+S3RK@users.noreply.github.com>
|
|
a2ac6f9582c4c996fa36e4801fa0aac756235754 wallet: unify FindNonChangeParentOutput functions (furszy)
b3f4e827378e010cd2a5d1b876d01db52c054d26 wallet: simplify ListCoins implementation (furszy)
Pull request description:
Focused on the following changes:
1) Removed the entire locked coins lookup that was inside `ListCoins` by including them directly on the `AvailableCoins` result (where we were skipping them before).
2) Unified both `FindNonChangeParentOutput` functions (only called from `ListCoins`)
ACKs for top commit:
achow101:
ACK a2ac6f9582c4c996fa36e4801fa0aac756235754
aureleoules:
ACK a2ac6f9582c4c996fa36e4801fa0aac756235754, LGTM
theStack:
Code-review ACK a2ac6f9582c4c996fa36e4801fa0aac756235754
Tree-SHA512: f72b21ee1600c5992559b5dcd8ff260527afac2ec696737f998343a0850b84d439e7f86ea52a14cc0cddabf132a30bf5b52fb34950578ac323083d4375b937f1
|
|
messages
76dc547ee7b05864e7b1b6c55fc0301d47aa3a15 gui: create tx, launch error dialog if backend throws runtime_error (furszy)
f4d79477ff0946b0bd340ade9251fa38e3b95dd7 wallet: coin selection, add duplicated inputs checks (furszy)
0aa065b14e67592d5be8f46ebbe5d59a083ff0a5 wallet: return accurate error messages from Coin Selection (furszy)
7e8340ab1a970a14e180b1fcf420b46a5657b062 wallet: make SelectCoins flow return util::Result (furszy)
e5e147fe97f706e82bc51358f8bdc355f355be57 wallet: refactor eight consecutive 'AttemptSelection' calls into a loop (furszy)
Pull request description:
Work decoupled from #25806, which cleanup and improves the Coin Selection flow further.
Adding the capability to propagate specific error messages from the Coin Selection process to the user.
Instead of always returning the general "Insufficient funds" message which is not always accurate to what happened internally.
Letting us instruct the user how to proceed under certain circumstances.
The following error messages were added:
1) If the selection result exceeds the maximum transaction weight,
we now will return:
-> "The inputs size exceeds the maximum weight. Please try sending
a smaller amount or manually consolidating your wallet's UTXOs".
2) If the user pre-selected inputs and disallowed the automatic coin
selection process (no other inputs are allowed), we now will
return:
-> "The preselected coins total amount does not cover the transaction
target. Please allow other inputs to be automatically selected or include
more coins manually".
3) The double-counted preset inputs during Coin Selection error will now
throw an "internal bug detected" message instead of crashing the node.
The essence of this work comes from several comments:
1. https://github.com/bitcoin/bitcoin/pull/26560#discussion_r1037395665
2. https://github.com/bitcoin/bitcoin/pull/25729#discussion_r940619491
3. https://github.com/bitcoin/bitcoin/pull/25269#pullrequestreview-1135240825
4. https://github.com/bitcoin/bitcoin/issues/23144 (which is connected to #24845)
ACKs for top commit:
ishaanam:
crACK 76dc547ee7b05864e7b1b6c55fc0301d47aa3a15
achow101:
ACK 76dc547ee7b05864e7b1b6c55fc0301d47aa3a15
aureleoules:
ACK 76dc547ee7b05864e7b1b6c55fc0301d47aa3a15
theStack:
ACK 76dc547ee7b05864e7b1b6c55fc0301d47aa3a15 :city_sunrise:
Tree-SHA512: 9de30792d7a5849cae77747aa978e70390b66ee9d082779a56088a024f82e725b0af050e6603aece0ac8229f6d73bc471ba97b4ab69dc7eddf419f5f56ae89a5
|
|
The function is only used in ListCoins.
|
|
coverage
9622fe64b8785430c71d4abc8637075026dc690c test: move coins result test to wallet_tests.cpp (furszy)
f69347d0588647ff9a4e986c7be987827a0417f4 test: extend and simplify availablecoins_tests (furszy)
212ccdf2c2b70d973b18ae78f0158ec5f0c3bbb4 wallet: AvailableCoins, add arg to include/skip locked coins (furszy)
Pull request description:
Negative PR with extended test coverage :).
1) Cleaned duplicated code and added coverage for the 'AvailableCoins' incremental result.
2) The class `AvailableCoinsTestingSetup` inside `availablecoins_tests.cpp` is a plain copy
of `ListCoinsTestingSetup` that is inside `wallet_tests.cpp`.
So, deleted the file and moved the `BasicOutputTypesTest` test case to `wallet_tests.cpp`.
3) Added arg to include/skip locked coins from the `AvailableCoins` result. This is needed for point (1) as otherwise the wallet will spend the coins that we recently created due its closeness to the recipient amount.
Note: this last point comes from #25659 where I'm using the same functionality to clean/speedup another flow as well.
ACKs for top commit:
achow101:
ACK 9622fe64b8785430c71d4abc8637075026dc690c
theStack:
ACK 9622fe64b8785430c71d4abc8637075026dc690c
aureleoules:
reACK 9622fe64b8785430c71d4abc8637075026dc690c, nice cleanup!
Tree-SHA512: 1ed9133120bfe8815455d1ad317bb0ff96e11a0cc34ee8098716ab9b001749168fa649212b2fa14b330c1686cb1f29039ff1f88ae306db68881b0428c038f388
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
Commits of previous years:
- 2021: f47dda2c58b5d8d623e0e7ff4e74bc352dfa83d7
- 2020: fa0074e2d82928016a43ca408717154a1c70a4db
- 2019: aaaaad6ac95b402fe18d019d67897ced6b316ee0
|
|
and not the general "Insufficient funds" when the wallet
actually have funds.
Two new error messages:
1) If the selection result exceeds the maximum transaction weight,
we now will return: "The inputs size exceeds the maximum weight".
2) If the user preselected inputs and disallowed the automatic coin
selection process (no other inputs are allowed), we now will
return: "The preselected coins total amount does not cover the
transaction target".
|
|
|
|
there is nothing to mix.
|
|
|
|
The CoinsResult class will now count the raw total amount and the effective
total amount internally (inside the 'CoinsResult::Add' and 'CoinsResult::Erase'
methods).
So there is no discrepancy between what we add/erase and the total values.
(which is what was happening on the coinselector_test because the 'CoinsResult'
object is manually created there, and we were not keeping the total amount
in sync with the outputs being added/removed).
|
|
The loop break shouldn't have being there.
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/nMinimumAmount/min_amount/g' $(git grep -l nMinimumAmount)
sed -i 's/nMaximumAmount/max_amount/g' $(git grep -l nMaximumAmount)
sed -i 's/nMinimumSumAmount/min_sum_amount/g' $(git grep -l nMinimumSumAmount)
sed -i 's/nMaximumCount/max_count/g' $(git grep -l nMaximumCount)
-END VERIFY SCRIPT-
|
|
Plus clean callers that use the params default values
|
|
so we can return the immature coinbase UTXOs as well.
|
|
so if there is an error in any of the pre-set coins, we can fail right away
without computing the wallet available coins set (calling `AvailableCoins`)
which is a slow operation as it goes through the entire wallet's txes map.
----------------------
And to make the Coin Selection flow cleared, have decoupled SelectCoins in two functions:
1) AutomaticCoinSelection.
2) SelectCoins.
1) AutomaticCoinSelection:
Receives a set of coins and selects the best subset of them to
cover the target amount.
2) SelectCoins
In charge of select all the user manually selected coins first ("pre-set inputs"), and
if coin_control 'm_allow_other_inputs=true', call 'AutomaticCoinSelection' to select a
subset of coins owned by the wallet to cover for the target - preset_inputs.total_amount
remaining value.
|
|
First step towards decoupling the pre-selected-inputs fetching functionality
from `SelectCoins`. Which, will let us not waste resources calculating the
available coins if one of the pre-set inputs has an error.
(right now, if one of the pre-set inputs is invalid, we first walk through
the entire wallet txes map just to end up failing right after it finish)
|
|
switch to new methods, remove old code. this also
updates the Size, All, and Clear methods to now use
the coins map.
this commit is not strictly a refactor because previously
coin selection was never run over the UNKNOWN type until the last
step when being run over all. now that we are iterating over each,
it is run over UNKNOWN but this is expected to be empty most of the time.
Co-authored-by: furszy <matiasfurszyfer@protonmail.com>
|
|
Change `CoinsResult` functions to uppercase to be consistent with
the style guide.
-BEGIN VERIFY SCRIPT-
git grep -l "available_coins" | grep -v mempool_stress.cpp | xargs sed -i "s/available_coins\.\(size\|all\|clear\)/available_coins\.\u\1/"
git grep -l AvailableCoins | xargs sed -i "/AvailableCoins/ s/\(all()\|size()\|clear()\)/\u\1/"
sed -i "s/\(clear()\|all()\|size()\)/\u&/g" src/wallet/spend.h
sed -i "/CoinsResult::/ s/\(clear()\|all()\|size()\)/\u&/" src/wallet/spend.cpp
sed -i "s/result.size/result.Size/" src/wallet/spend.cpp
sed -i "s/this->size/this->Size/" src/wallet/spend.cpp
-END VERIFY SCRIPT-
|
|
add Shuffle, Erase, and Add to CoinsResult struct
add a helper function for mapping TxoutType to OutputType
Co-authored-by: furszy <matiasfurszyfer@protonmail.com>
|
|
Rename `BResult` class to `util::Result` and update the class interface to be
more compatible with `std::optional` and with a full-featured result class
implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for
this change is to update existing `BResult` usages now so they don't have to
change later when more features are added in #25665.
This change makes the following improvements originally implemented in #25665:
- More explicit API. Drops potentially misleading `BResult` constructor that
treats any bilingual string argument as an error. Adds `util::Error`
constructor so it is never ambiguous when a result is being assigned an error
or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return
values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same
operators and methods as `std::optional`. `BResult` had a less familiar
interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj
naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so
naming reflects code organization and it is obvious where the class is coming
from. Drops "B" from name because it is undocumented what it stands for
(bilingual?)
- Has unit tests.
|
|
Run coin selection on each OutputType separately, choosing the best
solution according to the waste metric.
This is to avoid mixing UTXOs that are of different OutputTypes,
which can hurt privacy.
If no single OutputType can fund the transaction, then coin selection
considers the entire wallet, potentially mixing (current behavior).
This is done inside AttemptSelection so that all OutputTypes are
considered at each back-off in coin selection.
|
|
Pass the whole CoinsResult struct to SelectCoins instead of only a
vector. This means we now have to remove preselected coins from each
OutputType vector and shuffle each vector individually.
Pass the whole CoinsResult struct to AttemptSelection. This involves
moving the logic in AttemptSelection to a newly named function,
ChooseSelectionResult. This will allow us to run ChooseSelectionResult
over each OutputType in a later commit. This ensures the backoffs work
properly.
Update unit and bench tests to use CoinResult.
|
|
Store COutputs by OutputType in CoinsResult.
The struct stores vectors of `COutput`s by `OutputType`
for more convenient access
|
|
connect it to CreateTransaction and GetNewDestination
111ea3ab711414236f8678566a7884d48619b2d8 wallet: refactor GetNewDestination, use BResult (furszy)
22351725bc4c5eb63ee45f607374bbf2d76e2b8c send: refactor CreateTransaction flow to return a BResult<CTransactionRef> (furszy)
198fcca162f4d2f877feab485e629ff89818ff56 wallet: refactor, include 'FeeCalculation' inside 'CreatedTransactionResult' (furszy)
7a45c33d1f8a758850cf8e7bd6ad508939ba5c0d Introduce generic 'Result' class (furszy)
Pull request description:
Based on a common function signature pattern that we have all around the sources:
```cpp
bool doSomething(arg1, arg2, arg3, arg4, &result_obj, &error_string) {
// do something...
if (error) {
error_string = "something bad happened";
return false;
}
result = goodResult;
return true;
}
```
Introduced a generic class `BResult` that encapsulate the function boolean result, the result object (in case of having it) and, in case of failure, the string error reason.
Obtaining in this way cleaner function signatures and removing boilerplate code:
```cpp
BResult<Obj> doSomething(arg1, arg2, arg3, arg4) {
// do something...
if (error) return "something bad happened";
return goodResult;
}
```
Same cleanup applies equally to the function callers' side as well. There is no longer need to add the error string and the result object declarations before calling the function:
Before:
```cpp
Obj result_obj;
std::string error_string;
if (!doSomething(arg1, arg2, arg3, arg4, result_obj, error_string)) {
LogPrintf("Error: %s", error_string);
}
return result_obj;
```
Now:
```cpp
BResult<Obj> op_res = doSomething(arg1, arg2, arg3, arg4);
if (!op_res) {
LogPrintf("Error: %s", op_res.GetError());
}
return op_res.GetObjResult();
```
### Initial Implementation:
Have connected this new concept to two different flows for now:
1) The `CreateTransaction` flow. --> 7ba2b87c
2) The `GetNewDestination` flow. --> bcee0912
Happy note: even when introduced a new class into the sources, the amount of lines removed is almost equal to added ones :).
Extra note: this work is an extended version (and a decoupling) of the work that is inside #24845 (which does not contain the `GetNewDestination` changes nor the inclusion of the `FeeCalculation` field inside `CreatedTransactionResult`).
ACKs for top commit:
achow101:
ACK 111ea3ab711414236f8678566a7884d48619b2d8
w0xlt:
reACK https://github.com/bitcoin/bitcoin/pull/25218/commits/111ea3ab711414236f8678566a7884d48619b2d8
theStack:
re-ACK 111ea3ab711414236f8678566a7884d48619b2d8
MarcoFalke:
review ACK 111ea3ab711414236f8678566a7884d48619b2d8 🎏
Tree-SHA512: 6d84d901a4cb923727067f25ff64542a40edd1ea84fdeac092312ac684c34e3688a52ac5eb012717d2b73f4cb742b9d78e458eb0e9cb9d6d72a916395be91f69
|
|
|
|
|
|
|
|
|
|
Filtering `AvailableCoins` by spendable outputs only and using the retrieved total_amount.
|
|
We are skipping the non-spendable coins that appear in vCoins ('AvailableCoins' result) later, in several parts of the CreateTransaction and GetBalance flows:
GetAvailableBalance (1) gets all the available coins calling AvailableCoins and, right away, walk through the entire vector, skipping the non-spendable coins, to calculate the total balance.
Inside CreateTransactionInternal —> SelectCoins(vCoins,...), we have several calls to AttemptSelection which, on each of them internally, we call twice to GroupOutputs which internally has two for-loops over the entire vCoins vector that skip the non-spendable coins.
So, Purpose is not add the non-spendable coins into the AvailableCoins result (vCoins) in the first place for the processes that aren’t using them at all, so we don’t waste resources skipping them later so many times.
Note: this speedup is for all the processes that call to CreateTransaction and GetBalance* internally.
|
|
Instead of accepting a `vCoins` reference that is cleared at the beginning of the method.
Note:
This new struct, down the commits line, will contain other `AvailableCoins` useful results.
|
|
Previously in COutput, effective_value was initialized as the absolute
value of the txout, and fee as 0. effective_value along with fee were
calculated outside of the COutput constructor and set after the
object had been initialized. These changes will allow either the fee
or the feerate to be passed in a COutput constructor. If either are
provided, fee and effective_value are calculated and set in the
constructor. As a result, AvailableCoins also needs to be passed the
feerate when utxos are being spent. When balance is calculated or the
coins are being listed and feerate is neither available nor required,
AvailableCoinsListUnspent is used instead, which runs AvailableCoins
while providing the default value for feerate. Unit tests for the
calculation of effective value have also been added.
|
|
|
|
|
|
|
|
|
|
Instead of having a pointer to the CWalletTx in COutput, we can just
store the COutPoint and the CTxOut as those are the only things we need
from the CWalletTx. Other things CWalletTx used to provide were time and
fIsFromMe but these are also being stored by COutput.
|
