| Age | Commit message (Collapse) | Author |
|---|
|
4e9efac678a9c0ea4e4c7dd956ea036ae6cf17ec test: Check wallet name in -walletnotify script (João Barbosa)
9a5b5ee81f15b1d89cb25ff3e137a672536cdc46 wallet: Replace %w by wallet name in -walletnotify script (João Barbosa)
Pull request description:
Fixes #13237.
ACKs for top commit:
laanwj:
ACK 4e9efac678a9c0ea4e4c7dd956ea036ae6cf17ec
Tree-SHA512: 189dd1c785485f2e974d7c12531851b2a977778b3b954aa95efd527322ba3345924cfd587fb9c90b0fa979202af0ab2d90e53d125fe266a36c94f757e4176203
|
|
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
|
|
If after a backup, an address is issued beyond the initial
keypool range and none of the addresses in this range
is seen onchain, if a wallet is restored from backup, even in
case of rescan, funds may be loss due to the look-ahead
buffer not being incremented and so restored wallet not detecting
onchain out-of-range address as derived from its seed.
This scenario is theoretically unavoidable due to the requirement
of the keypool to have a max size. However, given the default
keypool size, this is unlikely. Document better keypool size
implications to avoid user setting a too low value.
|
|
|
|
|
|
So g_connman and g_banman globals can be removed next commit.
|
|
-BEGIN VERIFY SCRIPT-
s() { git grep -l "$1" src | xargs sed -i "s/$1/$2/g"; }
s 'struct InitInterfaces' 'struct NodeContext'
s 'InitInterfaces interfaces' 'NodeContext node'
s 'InitInterfaces& interfaces' 'NodeContext\& node'
s 'InitInterfaces m_interfaces' 'NodeContext m_context'
s 'InitInterfaces\* g_rpc_interfaces' 'NodeContext* g_rpc_node'
s 'g_rpc_interfaces = &interfaces' 'g_rpc_node = \&node'
s 'g_rpc_interfaces' 'g_rpc_node'
s 'm_interfaces' 'm_context'
s 'interfaces\.chain' 'node.chain'
s '\(AppInitMain\|Shutdown\|Construct\)(interfaces)' '\1(node)'
s 'init interfaces' 'chain clients'
-END VERIFY SCRIPT-
|
|
|
|
Prior to this PR, the wallet would not allow the `-rescan` option at
startup if pruning was enabled. This is unnecessarily restrictive. It
should be possible to rescan if pruning is enabled, as long as no blocks
have actually been pruned yet.
Remove the pruning check from WalletInit::ParameterInteraction(). If any
blocks have been pruned, that will be caught in CreateWalletFromFile().
|
|
Before it was 0 by default for main and 20000 for test and regtest.
Now it is 0 by default for all chains, thus there's no need to call Params().
Also now the default for main is properly documented
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/unsigned int flags, const bool debug_only,/unsigned int flags,/' src/util/system.h src/util/system.cpp
sed -i 's/ArgsManager::NONE, debug_only/flags, false/' src/util/system.cpp
sed -i 's/arg.second.m_debug_only/(arg.second.m_flags \& ArgsManager::DEBUG_ONLY)/' src/util/system.cpp
sed -i 's/ArgsManager::ALLOW_ANY, true, OptionsCategory::/ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::/' $(git grep --files-with-matches 'AddArg(' src)
sed -i 's/ArgsManager::ALLOW_ANY, false, OptionsCategory::/ArgsManager::ALLOW_ANY, OptionsCategory::/' $(git grep --files-with-matches 'AddArg(' src)
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/const bool debug_only,/unsigned int flags, &/' src/util/system.h src/util/system.cpp
sed -i -E 's/(true|false), OptionsCategory::/ArgsManager::ALLOW_ANY, &/' $(git grep --files-with-matches 'AddArg(' src)
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/inline std::string _(const char\* psz)/inline bilingual_str _(const char\* psz)/' src/util/translation.h
sed -i 's/return G_TRANSLATION_FUN ? (G_TRANSLATION_FUN)(psz) : psz;/return bilingual_str{psz, G_TRANSLATION_FUN ? (G_TRANSLATION_FUN)(psz) : psz};/' src/util/translation.h
sed -i 's/\b_("\([^"]\|\\"\)*")/&.translated/g' $(git grep --files-with-matches '\b_("' src)
echo Hard cases - multiline strings.
sed -i 's/"Visit %s for further information about the software.")/&.translated/g' src/init.cpp
sed -i "s/\"Only rebuild the block database if you are sure that your computer's date and time are correct\")/&.translated/g" src/init.cpp
sed -i 's/" restore from a backup.")/&.translated/g' src/wallet/db.cpp
sed -i 's/" or address book entries might be missing or incorrect.")/&.translated/g' src/wallet/wallet.cpp
echo Special case.
sed -i 's/_(COPYRIGHT_HOLDERS)/&.translated/' src/util/system.cpp test/lint/lint-format-strings.py
-END VERIFY SCRIPT-
|
|
This is a prerequisite for introducing bilingual error messages.
Note: #includes are arranged by clang-format-diff.py script.
|
|
|
|
f874e14cd3c84cd412bd3fb42b3ee1706ca6a267 [build]: check std::system for -[alert|block|wallet]notify (Sjors Provoost)
cc3ad56ff2bc2583fe68c4a9e0b41072a47c0b07 [build] MSVC: set HAVE_SYSTEM for desktop apps (Sjors Provoost)
c1c91bb78d7267f01ee3a3c156c218b46a92cd39 [build] detect std::system or ::wsystem (Sjors Provoost)
Pull request description:
Platforms such as iOs and Universal Windows Platform do not support launching a process through system().
ACKs for top commit:
laanwj:
code review ACK f874e14cd3c84cd412bd3fb42b3ee1706ca6a267
Tree-SHA512: 16bb4a8fa1896046ccb22a46c8985e1aa45f5b11ecf5539eb2299e9a58f1a5b085c0c12cb6939c7493d93abce7e84fadcbfc73374c887db63da6d00c08aa476d
|
|
5ebc6b0eb267e0552c66fffc5e5afe7df8becf80 bitcoind: update -avoidpartialspends description to account for auto-enable for avoid_reuse wallets (Karl-Johan Alm)
ada258f8c8f92d44d893cf9f22d15acdeca40b1a doc: release notes for avoid_reuse (Karl-Johan Alm)
27669551da52099e4a6a401acd7aa32b32832423 wallet: enable avoid_partial_spends by default if avoid_reuse is set (Karl-Johan Alm)
8f2e208f7c0468f9ba92bc789a698281b1c81284 test: add test for avoidreuse feature (Karl-Johan Alm)
0bdfbd34cf4015de87741ff549db35e5064f4e16 wallet/rpc: add 'avoid_reuse' option to RPC commands (Karl-Johan Alm)
f904723e0d5883309cb0dd14b826bc45c5e776fb wallet/rpc: add setwalletflag RPC and MUTABLE_WALLET_FLAGS (Karl-Johan Alm)
8247a0da3a46d7c38943ee0304343ab7465305bd wallet: enable avoid_reuse feature (Karl-Johan Alm)
eec15662fad917b169f5e3b8baaf4301dcf00a7b wallet: avoid reuse flags (Karl-Johan Alm)
58928098c299efdc7c5ddf2dc20716ca5272f21b wallet: make IsWalletFlagSet() const (Karl-Johan Alm)
129a5bafd9a3efa2fa16d780885048a06566d262 wallet: rename g_known_wallet_flags constant to KNOWN_WALLET_FLAGS (Karl-Johan Alm)
Pull request description:
Add a new wallet flag called `avoid_reuse` which, when enabled, will keep track of when a specific destination has been spent from, and will actively "blacklist" any new UTXOs which send to an already-spent-from destination.
This improves privacy, as a payer could otherwise begin tracking a payee's wallet by regularly peppering a known UTXO with dust outputs, which would then be scooped up and used in payments by the payee, allowing the payer to map out (1) the inputs owned by the payee and (2) the destinations to which the payee is making payments.
This replaces #10386 and together with the (now merged) #12257 it addresses #10065 in full. The concerns raised in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381 are also addressed due to #12257.
~~Note: this builds on top of #15780.~~ (merged)
ACKs for commit 5ebc6b:
jnewbery:
ACK 5ebc6b0eb
laanwj:
Concept and code-review ACK 5ebc6b0eb267e0552c66fffc5e5afe7df8becf80
meshcollider:
Code review ACK https://github.com/bitcoin/bitcoin/pull/13756/commits/5ebc6b0eb267e0552c66fffc5e5afe7df8becf80
achow101:
ACK 5ebc6b0eb267e0552c66fffc5e5afe7df8becf80 modulo above nits
Tree-SHA512: fdef45826af544cbbb45634ac367852cc467ec87081d86d08b53ca849e588617e9a0a255b7e7bb28692d15332de58d6c3d274ac003355220e4213d7d9070742e
|
|
Platforms such as iOs do not support launching a process
through system().
|
|
|
|
for avoid_reuse wallets
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./src/wallet/
-END VERIFY SCRIPT-
|
|
This commit moves the maxtxfee setting to the wallet. There is only
one minor behavior change:
- an error message in feebumper now refers to -maxtxfee instead of
maxTxFee.
|
|
Moves the following wallet load functions to a new wallet/load unit in
the libbitcoin_wallet library. All other functions in wallet/init remain
in libbitcoin_server:
- `VerifyWallets`
- `LoadWallets`
- `StartWallets`
- `FlushWallets`
- `StopWallets`
- `UnloadWallets`
|
|
Adds the following util units and adds them to libbitcoin_util:
- `util/url.cpp` takes `urlDecode` from `httpserver.cpp`
- `util/error.cpp` takes `TransactionErrorString` from
`node/transaction.cpp` and `AmountHighWarn` and `AmountErrMsg` from
`ui_interface.cpp`
- `util/fees.cpp` takes `StringForFeeReason` and `FeeModeFromString` from `policy/fees.cpp`
- `util/rbf.cpp` takes `SignalsOptInRBF` from `policy/rbf.cpp`
- 'util/validation.cpp` takes `FormatStateMessage` and `strMessageMagic` from 'validation.cpp`
|
|
Removes the now-unused Broadcast/ResendWalletTransactions interface from
validationinterface.
The wallet_resendwallettransactions.py needs a sleep added at the start
to make sure that the rebroadcast scheduler is warmed up before the next
block is mined.
|
|
|
|
This commit does not change behavior.
|
|
|
|
|
|
Route calls during node initialization and shutdown that would happen between a
node process and wallet processes through the serializable `Chain::Client`
interface, rather than `WalletInitInterface` which is now simpler and only
deals with early initialization and parameter interaction.
This commit mostly does not change behavior. The only change is that the
"Wallet disabled!" and "No wallet support compiled in!" messages are now logged
earlier during startup.
|
|
This commit does not change behavior. All it does is pass new function
parameters.
It is easiest to review this change with:
git log -p -n1 -U0 --word-diff-regex=.
|
|
|
|
65f3672f3b82a6fa30e5171f85bc8d8a29e0797e wallet: Refactor to use WalletLocation (João Barbosa)
01a4c095c87500650663341533f000c6b613e9da wallet: Add WalletLocation utility class (João Barbosa)
Pull request description:
Advantages of this change:
- avoid resolving wallet absolute path and name repetitively and in multiple places;
- avoid calling `GetWalletDir` in multiple places;
- extract these details from the actual wallet implementation.
The `WalletLocation` class can be a way to represent a wallet not yet loaded that exists in the wallet directory.
Tree-SHA512: 71ec09786e038499710e7acafe92d66ab9883fc894964e267443ae9c10a6872a10995c3987a169c436a4e793dae96b28fb97bd7f78483c4b72ac930fa23f8686
|
|
-BEGIN VERIFY SCRIPT-
mkdir -p src/util
git mv src/util.h src/util/system.h
git mv src/util.cpp src/util/system.cpp
git mv src/utilmemory.h src/util/memory.h
git mv src/utilmoneystr.h src/util/moneystr.h
git mv src/utilmoneystr.cpp src/util/moneystr.cpp
git mv src/utilstrencodings.h src/util/strencodings.h
git mv src/utilstrencodings.cpp src/util/strencodings.cpp
git mv src/utiltime.h src/util/time.h
git mv src/utiltime.cpp src/util/time.cpp
sed -i 's/<util\.h>/<util\/system\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmemory\.h>/<util\/memory\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmoneystr\.h>/<util\/moneystr\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilstrencodings\.h>/<util\/strencodings\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utiltime\.h>/<util\/time\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/BITCOIN_UTIL_H/BITCOIN_UTIL_SYSTEM_H/g' src/util/system.h
sed -i 's/BITCOIN_UTILMEMORY_H/BITCOIN_UTIL_MEMORY_H/g' src/util/memory.h
sed -i 's/BITCOIN_UTILMONEYSTR_H/BITCOIN_UTIL_MONEYSTR_H/g' src/util/moneystr.h
sed -i 's/BITCOIN_UTILSTRENCODINGS_H/BITCOIN_UTIL_STRENCODINGS_H/g' src/util/strencodings.h
sed -i 's/BITCOIN_UTILTIME_H/BITCOIN_UTIL_TIME_H/g' src/util/time.h
sed -i 's/ util\.\(h\|cpp\)/ util\/system\.\1/g' src/Makefile.am
sed -i 's/utilmemory\.\(h\|cpp\)/util\/memory\.\1/g' src/Makefile.am
sed -i 's/utilmoneystr\.\(h\|cpp\)/util\/moneystr\.\1/g' src/Makefile.am
sed -i 's/utilstrencodings\.\(h\|cpp\)/util\/strencodings\.\1/g' src/Makefile.am
sed -i 's/utiltime\.\(h\|cpp\)/util\/time\.\1/g' src/Makefile.am
sed -i 's/-> util ->/-> util\/system ->/' test/lint/lint-circular-dependencies.sh
sed -i 's/src\/util\.cpp/src\/util\/system\.cpp/g' test/lint/lint-format-strings.py test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilmoneystr\.cpp/src\/util\/moneystr\.cpp/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilstrencodings\.\(h\|cpp\)/src\/util\/strencodings\.\1/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\\utilstrencodings\.cpp/src\\util\\strencodings\.cpp/' build_msvc/libbitcoinconsensus/libbitcoinconsensus.vcxproj
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
This commit does the following changes:
- [wallet] Remove 'account' argument from GetLegacyBalance()
- GetLegacyBalance() is never called with an account argument.
Remove the argument and helper functions.
- [wallet] Remove CWallet::ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove AccountMove()
- Function no longer used.
- [wallet] Remove AddAccountingEntry()
- Function no longer used.
- [wallet] Remove GetAccountCreditDebit()
- Function no longer used.
- [wallet] Don't rewrite accounting entries when reordering wallet transactions.
- Accounting entries are deprecated. Don't rewrite them to the wallet
database when re-ordering transactions.
- [wallet] Remove WriteAccountingEntry()
- Function no longer used.
- [wallet] Don't read acentry key-values from wallet on load.
- [wallet] Remove ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove CAccountingEntry class
- No longer used
- [wallet] Remove GetLabelDestination
- Function no longer used.
- [wallet] Delete unused account functions
- ReadAccount
- WriteAccount
- EraseAccount
- DeleteLabel
- [wallet] Remove fromAccount argument from CommitTransaction()
- [wallet] Remove strFromAccount.
- No longer used.
- [wallet] Remove strSentAccount from GetAmounts().
- No longer used.
- [wallet] Update zapwallettxes comment to remove accounts.
- [wallet] Remove CAccount
- No longer used
- [docs] fix typo in release notes for PR 14023
|
|
|
|
|
|
Moves OutputType into its own module
|
|
|
|
Many options are extremely technical, and refer internals, making it
difficult to translate usefully. This came up in discussion of e.g.
#10949. If a message is not understood by translators (which are
typically end-users, not developers) they'll either translate it
literally, making it harder to understand instead of easier, with the
added drawback of the user no longer being able to google it.
Also the translation was only working for bitcoin-qt as with
the console programs, there is no translation backend. So it was
injecting never-used translation messages for bitcoin-cli, -tx.
For these reasons, stop translating options help completely. This should
not affect the output **in any way** except for bitcoin-qt when a
non-English language is configured in the locale.
This implements #10962.
|
|
|
|
Pass an error message back from CWallet::Verify(), and call
InitError/InitWarning from WalletInit::Verify().
This means that we can call CWallet::Verify() independently from
WalletInit and not have InitErrors printed to stdout. It also means that
the error can be reported to the user if dynamic wallet load fails.
|
|
This allows a single wallet to be verified. Prior to this commit, all
wallets were verified together by the WalletInit::Verify() function at
start-up.
Individual wallet verification will be done when loading wallets
dynamically at runtime.
|
|
WalletInit::Start calls postInitProcess() for each wallet. Previously
each call to postInitProcess() would attempt to schedule wallet
background flushing.
Just start wallet background flushing once from WalletInit::Start().
|
|
gArgs knows what the available arguments are and their help. Getting
the help message is moved to gArgs and HelpMessage() is removed
|
|
fac0db0 wallet: Make fee settings non-static members (MarcoFalke)
Pull request description:
The wallet header defined some globals (they were called "settings"), that should be class members instead.
This commit is hopefully only refactoring, apart from a multiwallet bugfix: Calling the rpc `settxfee` for one wallet, would set (and change) the fee rate for all loaded wallets. (See added test case)
Tree-SHA512: 4ab6ec2f5c714742396ded5e451ec3b1ceb771e3696492de29889d866de4365b3fbe4a2784d085c8b8bd11b1ebb8a1fec99ab2c62eee716791cfc67c0cf29e1b
|
