Age | Commit message (Collapse) | Author |
|
After multiple wallets became supported, wallet-related log messages
became ambiguous as to which wallet they were being emitted by.
fixes #11317
|
|
fac1223a568fa1ad6dd602350598eed278d115e8 Cache witness hash in CTransaction (MarcoFalke)
faab55fbb17f2ea5080bf02bc59eeef5ca746f07 Make CMutableTransaction constructor explicit (MarcoFalke)
Pull request description:
This speeds up:
* compactblocks (v2)
* ATMP
* validation and miner (via `BlockWitnessMerkleRoot`)
* sigcache (see also unrelated #13204)
* rpc and rest (nice, but irrelevant)
This presumably slows down rescan, which uses a `CTransaction` and its `GetHash`, but never uses the `GetWitnessHash`. The slow down is proportional to the number of witness transactions in the rescan window. I.e. early in the chain there should be no measurable slow down. Later in the chain, there should be a slow down, but acceptable given the speedups in the modules mentioned above.
Tree-SHA512: 443e86acfcceb5af2163e68840c581d44159af3fd1fce266cab3504b29fcd74c50812b69a00d41582e7e1c5ea292f420ce5e892cdfab691da9c24ed1c44536c7
|
|
|
|
Silently converting to a CMutableTransaction will drop all caches
and should thus be done explicitly
|
|
|
|
|
|
73b5bf2cb Add a test to make sure that negative effective values are filtered (Andrew Chow)
76d2f068a Benchmark BnB in the worst case where it exhausts (Andrew Chow)
6a34ff533 Have SelectCoinsMinConf and SelectCoins use BnB or Knapsack and use it (Andrew Chow)
fab04887c Add a GetMinimumFeeRate function which is wrapped by GetMinimumFee (Andrew Chow)
cd927ff32 Move original knapsack solver tests to coinselector_tests.cpp (Andrew Chow)
fb716f7b2 Move current coin selection algorithm to coinselection.{cpp,h} (Andrew Chow)
4566ab75f Add tests for the Branch and Bound algorithm (Andrew Chow)
4b2716da4 Remove coinselection.h -> wallet.h circular dependency (Andrew Chow)
7d77eb1a5 Use a struct for output eligibility (Andrew Chow)
ce7435cf1 Move output eligibility to a separate function (Andrew Chow)
0185939be Implement Branch and Bound coin selection in a new file (Andrew Chow)
f84fed8eb Store effective value, fee, and long term fee in CInputCoin (Andrew Chow)
12ec29d3b Calculate and store the number of bytes required to spend an input (Andrew Chow)
Pull request description:
This is an implementation of the [Branch and Bound coin selection algorithm written by Murch](http://murch.one/wp-content/uploads/2016/11/erhardt2016coinselection.pdf) (@xekyo). I have it set so this algorithm will run first and if it fails, it will fall back to the current coin selection algorithm. The coin selection algorithms and tests have been refactored to separate files instead of having them all in wallet.cpp.
I have added some tests for the new algorithm and a test for all of coin selection in general. However, more tests may be needed, but I will need help with coming up with more test cases.
This PR uses some code borrowed from #10360 to use effective values when selecting coins.
Tree-SHA512: b0500f406bf671e74984fae78e2d0fbc5e321ddf4f06182c5855e9d1984c4ef2764c7586d03e16fa4b578c340b21710324926f9ca472d5447a0d1ed43eb4357e
|
|
|
|
Construct CWalletTx objects in CWallet::CommitTransaction, instead of having
callers do it. This ensures CWalletTx objects are constructed in a uniform way
and all fields are set.
This also makes it possible to avoid confusing and wasteful CWalletTx copies in
https://github.com/bitcoin/bitcoin/pull/9381
There is no change in behavior.
|
|
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
|
|
This will include the error code and debug output as well as the reason string.
See #11955 for the motivation.
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
Change feebumper from a stateful class into a namespace of stateless
functions.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper stateless, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
|
|
Future commit will remove the FeeBumper class. This commit simply places
everything into a feebumper namespace, and changes the enum class name
from BumpeFeeResult to feebumper::Result.
|
|
Future PRs will completely refactor this translation unit and touch all
this code so we rename the variables to follow project stlye guidelines
in this preparation commit.
Don't use m_ prefixes for member variables since we're going to remove
the class entirely in the next commits.
|
|
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
|
|
|
|
f01103c MOVEONLY: Init functions wallet/wallet.cpp -> wallet/init.cpp (Russell Yanofsky)
e7fe320 MOVEONLY: Fee functions wallet/wallet.cpp -> wallet/fees.cpp (Russell Yanofsky)
d97fe20 Move some static functions out of wallet.h/cpp (Russell Yanofsky)
Pull request description:
This just moves some static wallet fee and init functions out of `wallet/wallet.cpp` and into new `wallet/fees.cpp` and `wallet/init.cpp` source files. There is one commit updating declarations and callers, followed by two MOVEONLY commits actually moving the function bodies.
This change is desirable because wallet.h/cpp are monolithic and hard to navigate, so pulling things out and grouping together pieces of related functionality should improve the organization.
Another motivation is the wallet process separation work in https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially) parameter parsing and fee estimation are still done in the main process rather than the wallet process, and having functions that run in different processes scrambled up throughout wallet.cpp is unnecessarily confusing.
Tree-SHA512: 6e6982ff82b2ab4e681c043907e2b1801ceb9513394730070f16c46ad338278a863f5b3759aa13db76a259b268b1c919c81f4e339f0796a3cfb990161e8c316d
|
|
8f2f1e0 wallet: Avoid second mapWallet lookup (João Barbosa)
Pull request description:
All calls to `mapWallet.count()` have the intent to detect if a `txid` exists and most are followed by a second lookup to retrieve the `CWalletTx`.
This PR replaces all `mapWallet.count()` calls with `mapWallet.find()` to avoid the second lookup.
Tree-SHA512: 96b7de7f5520ebf789a1aec1949a4e9c74e13683869cee012f717e5be8e51097d068e2347a36e89097c9a89f1ed1a1529db71760dac9b572e36a3e9ac1155f29
|
|
|
|
This commit just moves a few function declarations and updates callers.
Function bodies are moved in two followup MOVEONLY commits.
This change is desirable because wallet.h/cpp are monolithic and hard to
navigate, so pulling things out and grouping together pieces of related
functionality should improve the organization.
Another proximate motivation is the wallet process separation work in
https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially)
parameter parsing and fee estimation are still done in the main process rather
than the wallet process, and having functions that run in different processes
scrambled up throughout wallet.cpp is unnecessarily confusing.
|
|
They were temporary additions to ease the transition.
-BEGIN VERIFY SCRIPT-
find src/ -name "*.cpp" ! -wholename "src/util.h" ! -wholename "src/util.cpp" | xargs perl -i -pe 's/(?<!\.)(ParseParameters|ReadConfigFile|IsArgSet|(Soft|Force)?(Get|Set)(|Bool|)Arg(s)?)\(/gArgs.\1(/g'
-END VERIFY SCRIPT-
|
|
Improve parameter precedence in coin_control
|
|
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
|
|
Fee estimates will default to be non-conservative if the transaction in question is opt-in-RBF.
|
|
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
|
|
|
|
88b8f0b Simplify feebumper minimum fee code slightly (Russell Yanofsky)
Tree-SHA512: 4465daef63936860d016a7fd7fd31ce62878d87cb943a90f321b07a40accdc5e7970d99de46b2bc924eb0b422144d6f01649855949395518790ecd05d300ee52
|
|
No change in behavior. Get rid of specifiedConfirmTarget if/else block and
rename specifiedConfirmTarget and ignoreUserSetFee variables to
ignoreGlobalPayTxFee.
|
|
```
$ git blame src/policy/fees.cpp | grep becuase
3810e976 (2017-03-07 11:33:44 -0500 789) * checks for 2*target becuase we are taking the max over all time
$ git blame src/policy/fees.h | grep successfullly
2d2e1705 (2017-04-12 12:29:03 -0400 54) * representing that a tx was successfullly confirmed in less than or equal to
$ git blame src/wallet/feebumper.cpp | grep "hasen't"
a3878374 (2017-05-11 09:34:39 +0200 258) // make sure the transaction still has no descendants and hasen't been mined in the meantime
```
|
|
|
|
implementation.
|
|
|
|
|
|
68af651 MOVEONLY: move TxConfirmStats to cpp (Alex Morcos)
2332f19 Initialize TxConfirmStats in constructor (Alex Morcos)
5ba81e5 Read and Write fee estimate file directly from CBlockPolicyEstimator (Alex Morcos)
14e10aa Call estimate(Smart)Fee directly from CBlockPolicyEstimator (Alex Morcos)
dbb9e36 Give CBlockPolicyEstimator it's own lock (Alex Morcos)
f6187d6 Make processBlockTx private. (Alex Morcos)
ae7327b Make feeEstimator its own global instance of CBlockPolicyEstimator (Alex Morcos)
Tree-SHA512: dbf3bd2b30822e609a35f3da519b62d23f8a50e564750695ddebd08553b4c01874ae3e07d792c6cc78cc377d2db33b951ffedc46ac7edaf5793f9ebb931713af
|
|
|
|
|
|
|
|
|
|
|
|
emplace_back
|
|
|
|
|
|
|