| Age | Commit message (Collapse) | Author |
|---|
|
Treat dust outputs as non-standard, un-hardcode TX_FEE constants
|
|
Allow the default key to be unavailable
|
|
Allow setting of MIN_TX_FEE / MIN_RELAY_TX_FEE with
-mintxfee / -mintxrelayfee
Default values are the same (0.0001 BTC).
|
|
|
|
|
|
When debugging another issue, I found a hang-during-startup race condition due to
LoadWallet calling SetMinVersion (via LoadCryptedKey).
Writing to the file that you're in the process of reading is a bad idea.
|
|
This solves the issue where no default key can be added after -salvagewallet.
|
|
Always print full hashes (tx, block, inv)
|
|
Fix getbalance discrepency
|
|
|
|
|
|
ApproximateBestSubset internal RNG to prevent degenerate behavior.
|
|
Add -walletnotify to call an external script on wallet transactions
|
|
This fixes test_bitcoin failures on openbsd reported by dhill on IRC.
On some systems rand() is a simple LCG over 2^31 and so it produces
an even-odd sequence. ApproximateBestSubset was only using the least
significant bit and so every run of the iterative solver would be the
same for some inputs, resulting in some pretty dumb decisions.
Using something other than the least significant bit would paper over
the issue but who knows what other way a system's rand() might get us
here. Instead we use an internal RNG with a period of something like
2^60 which is well behaved. This also makes it possible to make the
selection deterministic for the tests, if we wanted to implement that.
|
|
Extremely large transactions with lots of inputs can cost the network
almost as much to process as they cost the sender in fees.
We would never create transactions larger than 100K big; this change
makes transactions larger than 100K non-standard, so they are not
relayed/mined by default. This is most important for miners that might
create blocks larger than 250K big, who could be vulnerable to a
make-your-blocks-so-expensive-to-verify-they-get-orphaned attack.
|
|
Two changes:
Use IsConfirmed() instead of IsFinal(), so 'getbalance "*" 0' uses the same
'is this output spendable' criteria as 'getbalance'. Fixes issue #172.
And a tiny refactor to CWallet::GetBalance() (redundant call to IsFinal -- IsConfirmed
calls IsFinal).
getbalance with no arguments and 'getbalance "*" 0' could return different different results,
|
|
|
|
Remove IsFromMe() check in CTxMemPool::accept()
|
|
In listaddressgroupings push down the IsMine check to run on each input.
|
|
|
|
Fixes issue #2178 : attacker could penny-flood with invalid-signature
transactions to deduce which addresses belonged to your node.
I'm committing this early for code review; I still need to write up
a test plan.
Executive summary of fix: check all transactions received from the network
for penny-flood rate-limiting before adding to the memory pool. But do NOT
ratelimit transactions added to the memory pool:
- because of blockchain reorgs
- stored in the wallet and added at startup
- sent from the GUI or one of the send* RPC commands (CWallet::CommitTransaction)
The limit-free-transactions code really should be a method on CNode, with
counters per-peer. But that is a bigger change for another day.
|
|
If the user was really after the fastest possible confirmation times
they would be manually setting a fee. In cases where the wallet builds
a transaction with a priority that is too low to qualify as free until
the next block, go ahead without a fee. Confirmation frequently takes
multiple blocks even when a minimum fee is provided.
|
|
This avoids a potential crash when trying to read the scrippubkeys on
transactions where the first input IsMine but some of the rest are not
when running listaddressgroupings.
|
|
Add new RPC "lockunspent", to prevent spending of selected outputs
|
|
- remove unused parameter from ThreadSafeAskFee(), which also results in
the removal of an orphan translation-string
|
|
Split off CBlockHeader from CBlock
|
|
Prevent RPC 'move' from deadlocking
|
|
and associated RPC "listlockunspent".
This is a memory-only filter, which is empty when a node restarts.
|
|
Cleaner and removes the need for the application-specific flags in
serialize.h.
|
|
It seemed to create two CWalletDB objects that both grab the
database lock.
|
|
|
|
fix some double-spaces in strings
|
|
|
|
The original test (checking whether the transaction occurs in the
txindex) is not usable anymore, as it will miss anything already
fully spent. However, as merkle transactions (and by extension,
wallet transactions) track which block they were last seen being
included in, we can use that to determine the need for
rebroadcasting.
|
|
- remove some unneeded stuff in sendcoinsentry.ui
- harmonize some "Error:"-messages
|
|
|
|
Use CBlock's vMerkleTree to cache transaction hashes, and pass them
along as argument in more function calls. During initial block download,
this results in every transaction's hash to be only computed once.
|
|
During the initial block download (or -loadblock), delay connection
of new blocks a bit, and perform them in a single action. This reduces
the load on the database engine, as subsequent blocks often update an
earlier block's transaction already.
|
|
This switches bitcoin's transaction/block verification logic to use a
"coin database", which contains all unredeemed transaction output scripts,
amounts and heights.
The name ultraprune comes from the fact that instead of a full transaction
index, we only (need to) keep an index with unspent outputs. For now, the
blocks themselves are kept as usual, although they are only necessary for
serving, rescanning and reorganizing.
The basic datastructures are CCoins (representing the coins of a single
transaction), and CCoinsView (representing a state of the coins database).
There are several implementations for CCoinsView. A dummy, one backed by
the coins database (coins.dat), one backed by the memory pool, and one
that adds a cache on top of it. FetchInputs, ConnectInputs, ConnectBlock,
DisconnectBlock, ... now operate on a generic CCoinsView.
The block switching logic now builds a single cached CCoinsView with
changes to be committed to the database before any changes are made.
This means no uncommitted changes are ever read from the database, and
should ease the transition to another database layer which does not
support transactions (but does support atomic writes), like LevelDB.
For the getrawtransaction() RPC call, access to a txid-to-disk index
would be preferable. As this index is not necessary or even useful
for any other part of the implementation, it is not provided. Instead,
getrawtransaction() uses the coin database to find the block height,
and then scans that block to find the requested transaction. This is
slow, but should suffice for debug purposes.
|
|
Corrupt wallets used to cause a DB_RUNRECOVERY uncaught exception and a
crash. This commit does three things:
1) Runs a BDB verify early in the startup process, and if there is a
low-level problem with the database:
+ Moves the bad wallet.dat to wallet.timestamp.bak
+ Runs a 'salvage' operation to get key/value pairs, and
writes them to a new wallet.dat
+ Continues with startup.
2) Much more tolerant of serialization errors. All errors in deserialization
are reported by tolerated EXCEPT for errors related to reading keypairs
or master key records-- those are reported and then shut down, so the user
can get help (or recover from a backup).
3) Adds a new -salvagewallet option, which:
+ Moves the wallet.dat to wallet.timestamp.bak
+ extracts ONLY keypairs and master keys into a new wallet.dat
+ soft-sets -rescan, to recreate transaction history
This was tested by randomly corrupting testnet wallets using a little
python script I wrote (https://gist.github.com/3812689)
|
|
|
|
Qt: show mined transactions at depth 1
|
|
|
|
|
|
Equivalent code. (false == 0 == DB_LOAD_OK). Fixes #1706.
|
|
implement CreateThread with boost::thread
|
|
Bugfix: Require OrderedTxItems to provide properly scoped accounting entry list
|
|
OrderedTxItems returns a multimap of pointers, but needs a place to store the actual CAccountingEntries it points to.
It had been using a stack item, which was clobbered as soon as it returned, resulting in undefined behaviour.
This fixes at least bug #1768.
|
|
Prevent clash with win32 API symbol
|
|
Listunspent txout address filtering and listaddressgroupings
|
