aboutsummaryrefslogtreecommitdiff
path: root/src/txmempool.cpp
AgeCommit message (Collapse)Author
2015-12-01Get the set of now-uncacheable-txn from CTxMemPool::TrimToSizeMatt Corallo
2015-12-01Add a score index to the mempool.Alex Morcos
The score index is meant to represent the order of priority for being included in a block for miners. Initially this is set to the transactions modified (by any feeDelta) fee rate. Index improvements and unit tests by sdaftuar.
2015-12-01Store the total sig op count of a tx.Alex Morcos
Store sum of legacy and P2SH sig op counts. This is calculated in AcceptToMemory pool and storing it saves redoing the expensive calculation in block template creation.
2015-11-30Fix removeForReorg to use MedianTimePastSuhas Daftuar
2015-11-30Track coinbase spends in CTxMemPoolEntrySuhas Daftuar
This allows us to optimize CTxMemPool::removeForReorg.
2015-11-30Fix comment in removeForReorgMatt Corallo
2015-11-30Fix removal of time-locked transactions during reorgMatt Corallo
2015-11-19Change GetPriority calculation.Alex Morcos
Compute the value of inputs that already are in the chain at time of mempool entry and only increase priority due to aging for those inputs. This effectively changes the CTxMemPoolEntry's GetPriority calculation from an upper bound to a lower bound.
2015-11-19Modify variable names for entry height and priorityAlex Morcos
2015-11-24Pass reference to estimateSmartFee and cleanup whitespaceSuhas Daftuar
2015-11-16EstimateSmart functions consider mempool min feeAlex Morcos
2015-11-16Add smart fee estimation functionsAlex Morcos
These are more useful fee and priority estimation functions. If there is no fee/pri high enough for the target you are aiming for, it will give you the estimate for the lowest target that you can reliably obtain. This is better than defaulting to the minimum. It will also pass back the target for which it returned an answer.
2015-10-28Merge pull request #6776Pieter Wuille
ab1f560 Support -checkmempool=N, which runs checks on average once every N transactions (Pieter Wuille)
2015-10-27Merge pull request #6464Wladimir J. van der Laan
2d8c49d Clean up tx prioritization when conflict mined (Casey Rodarmor)
2015-10-26fix locking issue with new mempool limitingJonas Schnelli
Current master crashes on OSX with an exception: "boost: mutex lock failed in pthread_mutex_lock: Invalid argument"
2015-10-20Support -checkmempool=N, which runs checks on average once every N transactionsPieter Wuille
2015-10-19Fix stale comment in CTxMemPool::TrimToSize.Matt Corallo
2015-10-14Undo GetMinFee-requires-extra-call-to-hit-0Matt Corallo
2015-10-13Implement on-the-fly mempool size limitation.Matt Corallo
After each transaction which is added to mempool, we first call Expire() to remove old transactions, then throwing away the lowest-feerate transactions. After throwing away transactions by feerate, we set the minimum relay fee to the maximum fee transaction-and-dependant-set we removed, plus the default minimum relay fee. After the next block is received, the minimum relay fee is allowed to decrease exponentially. Its halflife defaults to 12 hours, but is decreased to 6 hours if the mempool is smaller than half its maximum size, and 3 hours if the mempool is smaller than a quarter its maximum size. The minimum -maxmempool size is 40*-limitdescendantsize, as it is easy for an attacker to play games with the cheapest -limitdescendantsize transactions. -maxmempool defaults to 300MB. This disables high-priority transaction relay when the min relay fee adjustment is >0 (ie when the mempool is full). When the relay fee adjustment drops below the default minimum relay fee / 2 it is set to 0 (re-enabling priority-based free relay).
2015-10-13Track (and define) ::minRelayTxFee in CTxMemPoolMatt Corallo
2015-10-13Fix calling mempool directly, instead of pool, in ATMPMatt Corallo
2015-10-13Add Mempool Expire function to remove old transactionsPieter Wuille
(note the 9x multiplier on (void*)'s for CTxMemPool::DynamicMemoryUsage was accidentally introduced in 5add7a7 but should have waited for this commit which adds the extra index)
2015-09-23Fix mempool package tracking edge caseSuhas Daftuar
CalculateMemPoolAncestors was always looping over a transaction's inputs to find in-mempool parents. When adding a new transaction, this is the correct behavior, but when removing a transaction, we want to use the ancestor set that would be calculated by walking mapLinks (which should in general be the same set, except during a reorg when the mempool is in an inconsistent state, and the mapLinks-based calculation would be the correct one).
2015-09-19Track transaction packages in CTxMemPoolEntrySuhas Daftuar
Associate with each CTxMemPoolEntry all the size/fees of descendant mempool transactions. Sort mempool by max(feerate of entry, feerate of descendants). Update statistics on-the-fly as transactions enter or leave the mempool. Also add ancestor and descendant limiting, so that transactions can be rejected if the number or size of unconfirmed ancestors exceeds a target, or if adding a transaction would cause some other mempool entry to have too many (or too large) a set of unconfirmed in- mempool descendants.
2015-09-19TxMemPool: Change mapTx to a boost::multi_index_containerAshley Holman
Indexes on: - Tx Hash - Fee Rate (fee-per-kb)
2015-08-03Clean up tx prioritization when conflict minedCasey Rodarmor
2015-08-03Make sure LogPrintf strings are line-terminatedWladimir J. van der Laan
Fix the cases where LogPrint[f] was accidentally called without line terminator, which resulted in concatenated log lines. (see e.g. #6492)
2015-07-20Separate core memory usage computation in core_memusage.hPieter Wuille
2015-07-10Implement accurate memory accounting for mempoolPieter Wuille
2015-06-23Fix various warningsLuke Dashjr
Found while building on Debian 7
2015-05-15Consensus: MOVEONLY: Move CValidationState from main consensus/validationjtimon
2015-05-13Merge pull request #5159Wladimir J. van der Laan
b649e03 Create new BlockPolicyEstimator for fee estimates (Alex Morcos)
2015-05-13Create new BlockPolicyEstimator for fee estimatesAlex Morcos
This class groups transactions that have been confirmed in blocks into buckets, based on either their fee or their priority. Then for each bucket, the class calculates what percentage of the transactions were confirmed within various numbers of blocks. It does this by keeping an exponentially decaying moving history for each bucket and confirm block count of the percentage of transactions in that bucket that were confirmed within that number of blocks. -Eliminate txs which didn't have all inputs available at entry from fee/pri calcs -Add dynamic breakpoints and tracking of confirmation delays in mempool transactions -Remove old CMinerPolicyEstimator and CBlockAverage code -New smartfees.py -Pass a flag to the estimation code, using IsInitialBlockDownload as a proxy for when we are still catching up and we shouldn't be counting how many blocks it takes for transactions to be included. -Add a policyestimator unit test
2015-04-20Consensus: Create consensus/consensus.h with some constantsjtimon
2015-03-26Keep mempool consistent during block-reorgsGavin Andresen
This fixes a subtle bug involving block re-orgs and non-standard transactions. Start with a block containing a non-standard transaction, and one or more transactions spending it in the memory pool. Then re-org away from that block to another chain that does not contain the non-standard transaction. Result before this fix: the dependent transactions get stuck in the mempool without their parent, putting the mempool in an inconsistent state. Tested with a new unit test.
2015-03-06src/txmempool.cpp: make numEntries a uint32_tWladimir J. van der Laan
Don't ever serialize a size_t or long, their sizes are platform dependent.
2015-01-31Remove whitespaces before double colon in errors and logsPavel Janík
2014-12-27Decouple miner.o and txmempool.o from CTxUndojtimon
2014-12-23Merge pull request #5481Wladimir J. van der Laan
6484930 Apply AreSane() checks to the fees from the network. (Gregory Maxwell)
2014-12-19Added "Core" to copyright headerssandakersmann
Github-Pull: #5494 Rebased-From: 15de949bb9277e442302bdd8dee299a8d6deee60
2014-12-17make all catch() arguments constPhilip Kaufmann
- I saw this on http://en.cppreference.com/w/cpp/language/try_catch and thought it would be a good idea - also unify used format to better be able to search for exception uses in our codebase
2014-12-16Fix small typos in comments and error messagesPavel Janík
Rebased-From: 67b2d819cdf6181e7f016e5366ce7479830893bd Github-Pull: #5404
2014-12-15Apply AreSane() checks to the fees from the network.Gregory Maxwell
'Sane' was already defined by this code as: fee.GetFeePerK() > minRelayFee.GetFeePerK() * 10000 But sanity was only enforced for data loaded from disk. Note that this is a pretty expansive definition of 'sane': A 10 BTC fee is still passes the test if its on a 100kb transaction. This prevents a single insane fee on the network from making us reject our stored fee data at start. We still may reject valid saved fee state if minRelayFee is changed between executions. This also reduces the risk and limits the damage from a cascading failure where one party pays a bunch of insane fees which cases others to pay insane fees.
2014-12-08Make CTxMemPool::remove more effecient by avoiding recursionMatt Corallo
2014-12-08Make CTxMemPool::check more thourough by using CheckInputsMatt Corallo
2014-12-08Remove txn which are invalidated by coinbase maturity during reorgMatt Corallo
2014-11-17Update comments in txmempool to be doxygen compatibleMichael Ford
Fix typo in Read() error message
2014-10-31minor cleanup: include orders, end comments etc.Philip Kaufmann
- no code changes
2014-10-29Separate protocol versioning from clientversionCory Fields
2014-10-27MOVEONLY: Separate CTransaction and dependencies from corejtimon