| Age | Commit message (Collapse) | Author |
|---|
|
bitcoin-cli: remove unneeded dependencies (only minor code movement)
|
|
Remove unnecessary dependencies for bitcoin-cli
(leveldb, berkelydb, wallet, RPC server)
Build system changes:
- split libbitcoin.a into libbitcoin_common.a, libbitcoin_server.a and
libbitcoin_cli.a
Code changes (movement only):
- split up HelpMessage into HelpMessage in init.cpp and HelpMessageCli
in rpcclient.cpp
- move uiInterface from init.cpp to util.cpp
|
|
|
|
Also changes mempool to store CTxMemPoolEntries
to keep track of when they enter/exit the pool.
|
|
Split bitcoinrpc up into
- rpcserver: bitcoind RPC server
- rpcclient: bitcoin-cli RPC client
- rpcprotocol: shared common HTTP/JSON-RPC protocol code
One step towards making bitcoin-cli independent from the rest
of the code, and thus a smaller executable that doesn't have to
be linked against leveldb.
This commit only does code movement, there are no functional changes.
|
|
|
|
|
|
I regenerated the alert test data; now alerts are tested
against a protocol version way above the current protocol
version.
So we won't have to regenerate them every time we bump
PROTOCOL_VERSION in the future.
|
|
Use misc methods of avoiding unnecesary header includes.
Replace int typedefs with int##_t from stdint.h.
Replace PRI64[xdu] with PRI[xdu]64 from inttypes.h.
Normalize QT_VERSION ifs where possible.
Resolve some indirect dependencies as direct ones.
Remove extern declarations from .cpp files.
|
|
Test changes
|
|
|
|
Make util phexdigit array reusable
|
|
0056095 Show short scriptPubKeys correctly (Peter Todd)
22de68d Relay OP_RETURN TxOut as standard transaction type (Peter Todd)
Signed-off-by: Gavin Andresen <gavinandresen@gmail.com>
|
|
Changed CDataStream::GetAndClear() to use the most obvious
get get and clear instead of a tricky swap().
Added a unit test for CDataStream insert/erase/GetAndClear.
Note: GetAndClear() is not performance critical, it is used only
by the send-a-message-to-the-network code. Bug was not noticed
before now because the send-a-message code never erased from the
stream.
|
|
class template base_uint had its own private lookup table.
This is saving 256 bytes per instantiation.
The result is not spectacular as bitcoin-qt has only shrinked of
about 1Kb but it is still valid improvement.
Also, I have replaced a for loop with a memset() call.
Made CBigNum::SetHex() use the new HexDigit() function.
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
|
|
Also fix decoderawtransaction to not show reqSigs or addresses for
nulldata txouts. (Previous version also left reqSigs uninitialized
mistakenly)
|
|
Just-in-case sanity test for JSON spirit and AmountFromValue.
Also update rpc_format_monetary_values test to use ValueFromAmount,
so that ValueFromAmount is also tested.
|
|
Tests for issue #3126.
This problem pops up after upgrading json-spirit.
|
|
This reverts commit 2ecb7555a9df1e843fd25f588819e4ca1d94b266.
|
|
UTF-8 support for JSON-RPC
|
|
Relay OP_RETURN data TxOut as standard transaction type.
|
|
Reject non-canonically-encoded CompactSize
|
|
Inline signature serializer
|
|
|
|
|
|
Win32 version info
|
|
Instead of building a full copy of a CTransaction being signed, and
then modifying bits and pieces until its fits the form necessary
for computing the signature hash, use a wrapper serializer that
only serializes the necessary bits on-the-fly.
This makes it easier to see which data is actually being hash,
reduces load on the heap, and also marginally improves performances
(around 3-4us/sigcheck here). The performance improvements are much
larger for large transactions, though.
The old implementation of SignatureHash is moved to a unit tests,
to test whether the old and new algorithm result in the same value
for randomly-constructed transactions.
|
|
|
|
This way we can reuse rules rather than duplicating them.
|
|
binaries
This change moves test data into the binaries rather than reading them from
the disk at runtime.
Advantages:
- Tests become distributable
- Cross-compile friendly. Build on one machine and execute in an arbitrary
location on another.
- Easier testing for backports. Users can verify that tests pass without having
to track down corresponding test data.
- More trustworthy test results and easier quality assurance as tests make
fewer assumptions about their environment.
- Tests could theoretically run at client/daemon startup and exit on failure.
Disadvantages:
- Required 'hexdump' build-dependency. This is a standard bsd tool that should
be usable everywhere. It is likely already installed on all build-machines.
- Tests can no longer be fudged after build by altering test-data.
|
|
using relative directories from that point
|
|
|
|
|
|
CreateNewBlock / getblocktemplate cleaning
|
|
Seems it was forgotten about when IsPushOnly() and the unittests were
written. A particular oddity is that OP_RESERVED doesn't count towards
the >201 opcode limit unlike every other named opcode.
|
|
rather than a key.
CreateNewBlockWithKey() helper is added to restore existing functionality,
making this an equivalent-transformation change.
|
|
Useful as a source of test vectors to anyone re-implementing bloom
filters.
|
|
More unit tests for OP_NUMEQUAL
|
|
Make RPC password resistant to timing attacks
|
|
Only create signatures with even S, and verification mode to check.
|
|
BIP 32 derivation + test vectors
|
|
To fix a minor malleability found by Sergio Lerner (reported here:
https://bitcointalk.org/index.php?topic=8392.msg1245898#msg1245898)
The problem is that if (R,S) is a valid ECDSA signature for a given
message and public key, (R,-S) is also valid. Modulo N (the order
of the secp256k1 curve), this means that both (R,S) and (R,N-S) are
valid. Given that N is odd, S and N-S have a different lowest bit.
We solve the problem by forcing signatures to have an even S value,
excluding one of the alternatives.
This commit just changes the signing code to always produce even S
values, and adds a verification mode to check it. This code is not
enabled anywhere yet. Existing tests in key_tests.cpp verify that
the produced signatures are still valid.
|
|
The length of vectors, maps, sets, etc are serialized using
Write/ReadCompactSize -- which, unfortunately, do not use a
unique encoding.
So deserializing and then re-serializing a transaction (for example)
can give you different bits than you started with. That doesn't
cause any problems that we are aware of, but it is exactly the type
of subtle mismatch that can lead to exploits.
With this pull, reading a non-canonical CompactSize throws an
exception, which means nodes will ignore 'tx' or 'block' or
other messages that are not properly encoded.
Please check my logic... but this change is safe with respect to
causing a network split. Old clients that receive
non-canonically-encoded transactions or blocks deserialize
them into CTransaction/CBlock structures in memory, and then
re-serialize them before relaying them to peers.
And please check my logic with respect to causing a blockchain
split: there are no CompactSize fields in the block header, so
the block hash is always canonical. The merkle root in the block
header is computed on a vector<CTransaction>, so
any non-canonical encoding of the transactions in 'tx' or 'block'
messages is erased as they are read into memory by old clients,
and does not affect the block hash. And, as noted above, old
clients re-serialize (with canonical encoding) 'tx' and 'block'
messages before relaying to peers.
|
|
Fixes issue#2838; this is a tweaked version of pull#2845 that
should not leak the length of the password and is more generic,
in case we run into other situations where we need
timing-attack-resistant comparisons.
|
|
Simplify storage of orphan transactions, fix CVE-2013-4627
|
|
|
|
Add unittests for multiple ELSEs in a row
|
|
Orphan transactions were stored as a CDataStream pointer;
this changes the mapOrphanTransactions data structures to
store orphans as a CTransaction.
This also fixes CVE-2013-4627 by always re-serializing
transactions before relaying them.
|
|
Public functions referenced elsewhere are added to miner.h.
|
|
IF ELSE ELSE ENDIF is a valid construct; execution or non-execution
inverts on each ELSE encountered.
|
