| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
|
|
We were previously ruling out 17-20 pubkeys multisig, while they are
only invalid under P2SH context.
This makes multisigs with up to 20 keys be detected as valid by the
solver. This is however *not* a policy change as it would only apply
to bare multisigs, which are already limited to 3 pubkeys.
Note that this does not change the sigOpCount calculation (as it would
break consensus). Therefore 1-16 keys multisigs are counted as 1-16 sigops
and 17-20 keys multisigs are counted as 20 sigops.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
|
|
This changes all context dependent checks in the parser to be
disjunctions of equality checks, rather than also including inequalities.
This makes sure that adding a new context enum in the future won't change
semantics for existing checks.
The error messages are also made a bit more consistent.
|
|
|
|
-BEGIN VERIFY SCRIPT-
git rm src/optional.h
sed -i -e 's/Optional</std::optional</g' $(git grep -l 'Optional<' src)
sed -i -e 's/{nullopt}/{std::nullopt}/g' $(git grep -l 'nullopt' src)
sed -i -e 's/ nullopt;/ std::nullopt;/g' $(git grep -l 'nullopt' src)
sed -i -e 's/ nullopt)/ std::nullopt)/g' $(git grep -l 'nullopt' src)
sed -i -e 's/(nullopt)/(std::nullopt)/g' $(git grep -l 'nullopt' src)
sed -i -e 's/ nullopt,/ std::nullopt,/g' $(git grep -l 'nullopt' src)
sed -i -e 's/? nullopt :/? std::nullopt :/g' $(git grep -l 'nullopt' src)
sed -i -e 's/: nullopt}/: std::nullopt}/g' $(git grep -l 'nullopt' src)
sed -i -e '/optional.h \\/d' src/Makefile.am
sed -i -e '/#include <optional.h>/d' src/test/fuzz/autofile.cpp src/test/fuzz/buffered_file.cpp src/test/fuzz/node_eviction.cpp
sed -i -e 's/#include <optional.h>/#include <optional>/g' $(git grep -l '#include <optional.h>' src)
-END VERIFY SCRIPT-
|
|
|
|
|
|
HexStr can be called with anything that bas `begin()` and `end()` functions,
so clean up the redundant calls.
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
# Mark all lines with #includes
sed -i --regexp-extended -e 's/(#include <.*>)/\1 /g' $(git grep -l '#include' ./src/bench/ ./src/test ./src/wallet/test/)
# Sort all marked lines
git diff -U0 | ./contrib/devtools/clang-format-diff.py -p1 -i -v
-END VERIFY SCRIPT-
|
|
Also adds tests for this:
For ranged descriptors with unhardened derivation, we expect to
find parent keys in the cache but no child keys.
For descriptors containing an xpub but do not have unhardened derivation
(i.e. hardened derivation or single xpub with or without derivation),
we expect to find all of the keys in the cache, and the same
number of keys in the cache as in the SigningProvider.
For everything else (no xpub), nothing should be cached at all.
|
|
If unhardened derivation is used, cache the immediate derivation
parent xpub and use it for unhardened derivation
|
|
and GetPubKey
Have Expand, ExpandFromCache, and ExpandHelper take additional DescriptorCache
parameters. These are then passed into PubkeyProvider::GetPubKey which
also takes them as arguments.
Reading and writing to the cache is pushed down into GetPubKey. The old cache where
pubkeys are serialized to a vector is completely removed and instead xpubs are being
cached in DescriptorCache.
|
|
|
|
-BEGIN VERIFY SCRIPT-
# Move files
for f in $(git ls-files src/test/lib/); do git mv $f src/test/util/; done
git mv src/test/setup_common.cpp src/test/util/
git mv src/test/setup_common.h src/test/util/
# Replace Windows paths
sed -i -e 's|\\setup_common|\\util\\setup_common|g' $(git grep -l '\\setup_common')
sed -i -e 's|src\\test\\lib\\|src\\test\\util\\|g' build_msvc/test_bitcoin/test_bitcoin.vcxproj
# Everything else
sed -i -e 's|/setup_common|/util/setup_common|g' $(git grep -l 'setup_common')
sed -i -e 's|test/lib/|test/util/|g' $(git grep -l 'test/lib/')
# Fix include guard
sed -i -e 's|BITCOIN_TEST_SETUP_COMMON_H|BITCOIN_TEST_UTIL_SETUP_COMMON_H|g' ./src/test/util/setup_common.h
sed -i -e 's|BITCOIN_TEST_LIB_|BITCOIN_TEST_UTIL_|g' $(git grep -l 'BITCOIN_TEST_LIB_')
-END VERIFY SCRIPT-
|
|
|
|
Changed MaybeUseHInsteadOfApostrophy to UseHInsteadOfApostrophe.
This function now always replaces apostrophes with 'h'.
The original Check function was renamed to DoCheck and it's
called with an additional parameter which tells it to either
leave the prv and pub arguments as is or replace the apostrophes
with 'h'. The test runs with apostrophes replaced in prv only,
pub only, prv and pub and without replacement at all. Replacement
of apostrophes in a descriptor and then running DoCheck is conditional
on whether apostrophes are found in that descriptor.
Additionally, instead of dropping the checksum recalculate it
after replacing apostrophes with 'h' in the function UseHInsteadOfApostrophe
using the GetDescriptorChecksum function. That way, this also
introduces an indirect unit test to GetDescriptoChecksum.
|
|
|
|
|
|
failed
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./src/bench/
./contrib/devtools/copyright_header.py update ./src/test/
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
sed -i --regexp-extended -e 's/test_bitcoin\.(h|cpp)/setup_common.\1/g' $(git grep -l test_bitcoin)
git mv ./src/test/test_bitcoin.h ./src/test/setup_common.h
git mv ./src/test/test_bitcoin.cpp ./src/test/setup_common.cpp
sed -i -e 's/BITCOIN_TEST_TEST_BITCOIN_H/BITCOIN_TEST_SETUP_COMMON_H/g' ./src/test/setup_common.h
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
|
|
109699dd33 Add release notes (Pieter Wuille)
b65326b562 Add matching descriptors to scantxoutset output + tests (Pieter Wuille)
16203d5df7 Add descriptors to listunspent and getaddressinfo + tests (Pieter Wuille)
9b2a25b13f Add tests for InferDescriptor and Descriptor::IsSolvable (Pieter Wuille)
225bf3e3b0 Add Descriptor::IsSolvable() to distinguish addr/raw from others (Pieter Wuille)
4d78bd93b5 Add support for inferring descriptors from scripts (Pieter Wuille)
Pull request description:
This PR adds functionality to convert a script to a descriptor, given a `SigningProvider` with the relevant information about public keys and redeemscripts/witnessscripts.
The feature is exposed in `listunspent`, `getaddressinfo`, and `scantxoutset` whenever these calls are applied to solvable outputs/addresses.
This is not very useful on its own, though when we add RPCs to import descriptors, or sign PSBTs using descriptors, these strings become a compact and standalone way of conveying everything necessary to sign an output (excluding private keys).
Unit tests and rudimentary RPC tests are included (more relevant tests can be added once RPCs support descriptors).
Fixes #14503.
Tree-SHA512: cb36b84a3e0200375b7e06a98c7e750cfaf95cf5de132cad59f7ec3cbd201f739427de0dc108f515be7aca203652089fbf5f24ed283d4553bddf23a3224ab31f
|
|
|
|
-BEGIN VERIFY SCRIPT-
mkdir -p src/util
git mv src/util.h src/util/system.h
git mv src/util.cpp src/util/system.cpp
git mv src/utilmemory.h src/util/memory.h
git mv src/utilmoneystr.h src/util/moneystr.h
git mv src/utilmoneystr.cpp src/util/moneystr.cpp
git mv src/utilstrencodings.h src/util/strencodings.h
git mv src/utilstrencodings.cpp src/util/strencodings.cpp
git mv src/utiltime.h src/util/time.h
git mv src/utiltime.cpp src/util/time.cpp
sed -i 's/<util\.h>/<util\/system\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmemory\.h>/<util\/memory\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmoneystr\.h>/<util\/moneystr\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilstrencodings\.h>/<util\/strencodings\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utiltime\.h>/<util\/time\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/BITCOIN_UTIL_H/BITCOIN_UTIL_SYSTEM_H/g' src/util/system.h
sed -i 's/BITCOIN_UTILMEMORY_H/BITCOIN_UTIL_MEMORY_H/g' src/util/memory.h
sed -i 's/BITCOIN_UTILMONEYSTR_H/BITCOIN_UTIL_MONEYSTR_H/g' src/util/moneystr.h
sed -i 's/BITCOIN_UTILSTRENCODINGS_H/BITCOIN_UTIL_STRENCODINGS_H/g' src/util/strencodings.h
sed -i 's/BITCOIN_UTILTIME_H/BITCOIN_UTIL_TIME_H/g' src/util/time.h
sed -i 's/ util\.\(h\|cpp\)/ util\/system\.\1/g' src/Makefile.am
sed -i 's/utilmemory\.\(h\|cpp\)/util\/memory\.\1/g' src/Makefile.am
sed -i 's/utilmoneystr\.\(h\|cpp\)/util\/moneystr\.\1/g' src/Makefile.am
sed -i 's/utilstrencodings\.\(h\|cpp\)/util\/strencodings\.\1/g' src/Makefile.am
sed -i 's/utiltime\.\(h\|cpp\)/util\/time\.\1/g' src/Makefile.am
sed -i 's/-> util ->/-> util\/system ->/' test/lint/lint-circular-dependencies.sh
sed -i 's/src\/util\.cpp/src\/util\/system\.cpp/g' test/lint/lint-format-strings.py test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilmoneystr\.cpp/src\/util\/moneystr\.cpp/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilstrencodings\.\(h\|cpp\)/src\/util\/strencodings\.\1/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\\utilstrencodings\.cpp/src\\util\\strencodings\.cpp/' build_msvc/libbitcoinconsensus/libbitcoinconsensus.vcxproj
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
|
|
|
