Age | Commit message (Collapse) | Author |
|
-BEGIN VERIFY SCRIPT-
sed -i --regexp-extended -e 's/\buint256S\("(0x)?([^"]{64})"\)/uint256{"\2"}/g' $(git grep -l uint256S)
-END VERIFY SCRIPT-
|
|
TxidFromString was deprecated due to missing 64-character length-check
and hex-check, replace it with the more robust Txid::FromHex.
|
|
The existing code provides two randomness mechanisms for test purposes:
- g_insecure_rand_ctx (with its wrappers InsecureRand*), which during tests is
initialized using either zeros (SeedRand::ZEROS), or using environment-provided
randomness (SeedRand::SEED).
- g_mock_deterministic_tests, which controls some (but not all) of the normal
randomness output if set, but then makes it extremely predictable (identical
output repeatedly).
Replace this with a single mechanism, which retains the SeedRand modes to control
all randomness. There is a new internal deterministic PRNG inside the random
module, which is used in GetRandBytes() when in test mode, and which is also used
to initialize g_insecure_rand_ctx. This means that during tests, all random numbers
are made deterministic. There is one exception, GetStrongRandBytes(), which even
in test mode still uses the normal PRNG state.
This probably opens the door to removing a lot of the ad-hoc "deterministic" mode
functions littered through the codebase (by simply running relevant tests in
SeedRand::ZEROS mode), but this isn't done yet.
|
|
|
|
|
|
|
|
Since the kernel library no longer depends on the system file, move it
to the common library instead in accordance to the diagram in
doc/design/libraries.md.
|
|
as many of the unit tests don't use this code
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
Commits of previous years:
- 2021: f47dda2c58b5d8d623e0e7ff4e74bc352dfa83d7
- 2020: fa0074e2d82928016a43ca408717154a1c70a4db
- 2019: aaaaad6ac95b402fe18d019d67897ced6b316ee0
|
|
This switches .read() and .write() to take spans of bytes.
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
Commits of previous years:
* 2020: fa0074e2d82928016a43ca408717154a1c70a4db
* 2019: aaaaad6ac95b402fe18d019d67897ced6b316ee0
|
|
-BEGIN VERIFY SCRIPT-
# Move to directory
mkdir src/common
git mv src/bloom.cpp src/common/
git mv src/bloom.h src/common/
# Replace occurrences
sed -i 's|\<bloom\.cpp\>|common/bloom.cpp|g' $(git grep -l 'bloom.cpp')
sed -i 's|\<bloom\.h\>|common/bloom.h|g' $(git grep -l 'bloom.h')
sed -i 's|BITCOIN_BLOOM_H|BITCOIN_COMMON_BLOOM_H|g' $(git grep -l 'BLOOM_H')
-END VERIFY SCRIPT-
|
|
We can avoid many unnecessary std::vector allocations by changing
CBloomFilter to take Spans instead of std::vector's for the `insert`
and `contains` operations.
CBloomFilter currently converts types such as CDataStream and uint256
to std::vector on `insert` and `contains`. This is unnecessary because
CDataStreams and uint256 are already std::vectors internally. We just
need a way to point to the right data within those types. Span gives
us this ability.
Signed-off-by: William Casarin <jb55@jb55.com>
|
|
Also, rename CSerializeData to SerializeData
|
|
|
|
fa4632c41714dfaa699bacc6a947d72668a4deef test: Move boost/stdlib includes last (MarcoFalke)
fa488f131fd4f5bab0d01376c5a5013306f1abcd scripted-diff: Bump copyright headers (MarcoFalke)
fac5c373006a9e4bcbb56843bb85f1aca4d87599 scripted-diff: Sort test includes (MarcoFalke)
Pull request description:
When writing tests, often includes need to be added or removed. Currently the list of includes is not sorted, so developers that write tests and have `clang-format` installed will either have an unrelated change (sorting) included in their commit or they will have to manually undo the sort.
This pull preempts both issues by just sorting all includes in one commit.
Please be aware that this is **NOT** a change to policy to enforce clang-format or any other developer guideline or process. Developers are free to use whatever tool they want, see also #18651.
Edit: Also includes a commit to bump the copyright headers, so that the touched files don't need to be touched again for that.
ACKs for top commit:
practicalswift:
ACK fa4632c41714dfaa699bacc6a947d72668a4deef
jonatack:
ACK fa4632c41714dfaa, light review and sanity checks with gcc build and clang fuzz build
Tree-SHA512: 130a8d073a379ba556b1e64104d37c46b671425c0aef0ed725fd60156a95e8dc83fb6f0b5330b2f8152cf5daaf3983b4aca5e75812598f2626c39fd12b88b180
|
|
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
# Mark all lines with #includes
sed -i --regexp-extended -e 's/(#include <.*>)/\1 /g' $(git grep -l '#include' ./src/bench/ ./src/test ./src/wallet/test/)
# Sort all marked lines
git diff -U0 | ./contrib/devtools/clang-format-diff.py -p1 -i -v
-END VERIFY SCRIPT-
|
|
fae43a97ca947cd0802392e9bb86d9d0572c0fba test: Seed test RNG context for each test case, print seed (MarcoFalke)
Pull request description:
Debugging failing unit tests is hard if the failure is non-deterministic and the seed is not known.
Fix that by printing the seed and making it possible to set the seed from outside.
ACKs for top commit:
davereikher:
Tested ACK fae43a97ca947cd0802392e9bb86d9d0572c0fba
Tree-SHA512: 33d848dd1f4180d3664ecf60e9810c2a93590c05276b2c46b1e4fe6e376b45916a46b90c803bb602750ab666da3a05ce499e550024685a90b8cc38fab6667cb8
|
|
-BEGIN VERIFY SCRIPT-
# Move files
for f in $(git ls-files src/test/lib/); do git mv $f src/test/util/; done
git mv src/test/setup_common.cpp src/test/util/
git mv src/test/setup_common.h src/test/util/
# Replace Windows paths
sed -i -e 's|\\setup_common|\\util\\setup_common|g' $(git grep -l '\\setup_common')
sed -i -e 's|src\\test\\lib\\|src\\test\\util\\|g' build_msvc/test_bitcoin/test_bitcoin.vcxproj
# Everything else
sed -i -e 's|/setup_common|/util/setup_common|g' $(git grep -l 'setup_common')
sed -i -e 's|test/lib/|test/util/|g' $(git grep -l 'test/lib/')
# Fix include guard
sed -i -e 's|BITCOIN_TEST_SETUP_COMMON_H|BITCOIN_TEST_UTIL_SETUP_COMMON_H|g' ./src/test/util/setup_common.h
sed -i -e 's|BITCOIN_TEST_LIB_|BITCOIN_TEST_UTIL_|g' $(git grep -l 'BITCOIN_TEST_LIB_')
-END VERIFY SCRIPT-
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./src/bench/
./contrib/devtools/copyright_header.py update ./src/test/
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
sed -i --regexp-extended -e 's/test_bitcoin\.(h|cpp)/setup_common.\1/g' $(git grep -l test_bitcoin)
git mv ./src/test/test_bitcoin.h ./src/test/setup_common.h
git mv ./src/test/test_bitcoin.cpp ./src/test/setup_common.cpp
sed -i -e 's/BITCOIN_TEST_TEST_BITCOIN_H/BITCOIN_TEST_SETUP_COMMON_H/g' ./src/test/setup_common.h
-END VERIFY SCRIPT-
|
|
|
|
-BEGIN VERIFY SCRIPT-
mkdir -p src/util
git mv src/util.h src/util/system.h
git mv src/util.cpp src/util/system.cpp
git mv src/utilmemory.h src/util/memory.h
git mv src/utilmoneystr.h src/util/moneystr.h
git mv src/utilmoneystr.cpp src/util/moneystr.cpp
git mv src/utilstrencodings.h src/util/strencodings.h
git mv src/utilstrencodings.cpp src/util/strencodings.cpp
git mv src/utiltime.h src/util/time.h
git mv src/utiltime.cpp src/util/time.cpp
sed -i 's/<util\.h>/<util\/system\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmemory\.h>/<util\/memory\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmoneystr\.h>/<util\/moneystr\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilstrencodings\.h>/<util\/strencodings\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utiltime\.h>/<util\/time\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/BITCOIN_UTIL_H/BITCOIN_UTIL_SYSTEM_H/g' src/util/system.h
sed -i 's/BITCOIN_UTILMEMORY_H/BITCOIN_UTIL_MEMORY_H/g' src/util/memory.h
sed -i 's/BITCOIN_UTILMONEYSTR_H/BITCOIN_UTIL_MONEYSTR_H/g' src/util/moneystr.h
sed -i 's/BITCOIN_UTILSTRENCODINGS_H/BITCOIN_UTIL_STRENCODINGS_H/g' src/util/strencodings.h
sed -i 's/BITCOIN_UTILTIME_H/BITCOIN_UTIL_TIME_H/g' src/util/time.h
sed -i 's/ util\.\(h\|cpp\)/ util\/system\.\1/g' src/Makefile.am
sed -i 's/utilmemory\.\(h\|cpp\)/util\/memory\.\1/g' src/Makefile.am
sed -i 's/utilmoneystr\.\(h\|cpp\)/util\/moneystr\.\1/g' src/Makefile.am
sed -i 's/utilstrencodings\.\(h\|cpp\)/util\/strencodings\.\1/g' src/Makefile.am
sed -i 's/utiltime\.\(h\|cpp\)/util\/time\.\1/g' src/Makefile.am
sed -i 's/-> util ->/-> util\/system ->/' test/lint/lint-circular-dependencies.sh
sed -i 's/src\/util\.cpp/src\/util\/system\.cpp/g' test/lint/lint-format-strings.py test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilmoneystr\.cpp/src\/util\/moneystr\.cpp/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilstrencodings\.\(h\|cpp\)/src\/util\/strencodings\.\1/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\\utilstrencodings\.cpp/src\\util\\strencodings\.cpp/' build_msvc/libbitcoinconsensus/libbitcoinconsensus.vcxproj
-END VERIFY SCRIPT-
|
|
|
|
A number of BOOST_CHECK_EQUAL calls would result in warnings about signs.
|
|
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/\<insecure_randbits(/InsecureRandBits(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
sed -i 's/\<insecure_randbool(/InsecureRandBool(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
sed -i 's/\<insecure_randrange(/InsecureRandRange(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
sed -i 's/\<insecure_randbytes(/InsecureRandBytes(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
sed -i 's/\<insecure_rand256(/InsecureRand256(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
sed -i 's/\<insecure_rand(/InsecureRand32(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
sed -i 's/\<seed_insecure_rand(/SeedInsecureRand(/g' src/test/*.cpp src/test/*.h src/wallet/test/*.cpp
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
sed -i "s/\<GetRandHash(/insecure_rand256(/" src/test/*_tests.cpp
sed -i "s/\<GetRand(/insecure_randrange(/" src/test/*_tests.cpp src/test/test_bitcoin.cpp
sed -i 's/\<insecure_rand() % \([0-9]\+\)/insecure_randrange(\1)/g' src/test/*_tests.cpp
-END VERIFY SCRIPT-
|
|
73f4119 Refactoring: Removed using namespace <xxx> from bench/ and test/ source files. (Karl-Johan Alm)
|
|
|
|
Edited via:
$ contrib/devtools/copyright_header.py update .
|
|
|
|
Output instances of "BloomFilter" changed to "Bloom filter", in accordance with Wikipedia standard notation:
https://en.wikipedia.org/wiki/Bloom_filter
also to sync with the majority of cases in the self-same file
|
|
Remove the nType and nVersion as parameters to all serialization methods
and functions. There is only one place where it's read and has an impact
(in CAddress), and even there it does not impact any of the recursively
invoked serializers.
Instead, the few places that need nType or nVersion are changed to read
it directly from the stream object, through GetType() and GetVersion()
methods which are added to all stream classes.
|
|
This patch changes the implementation from one that stores 16 2-bit integers
in one uint32_t's, to one that stores the first bit of 64 2-bit integers in
one uint64_t and the second bit in another. This allows for 450x faster
refreshing and 2.2x faster average speed.
|
|
|
|
|
|
|
|
While CBloomFilter is usually used with an explicitly set nTweak,
CRollingBloomFilter is only used internally. Requiring every caller to
set nTweak is error-prone and redundant; better to have the class handle
that for you with a high-quality randomness source.
Additionally when clearing the filter it makes sense to change nTweak as
well to recover from a bad setting, e.g. due to insufficient randomness
at initialization, so the clear() method is replaced by a reset() method
that sets a new, random, nTweak value.
|
|
For when you need to keep track of the last N items
you've seen, and can tolerate some false-positives.
Rebased-by: Pieter Wuille <pieter.wuille@gmail.com>
|