| Age | Commit message (Collapse) | Author |
|---|
|
|
|
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
|
|
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
|
|
Replaces numbered place marker %2 with %1, because the QString::arg() member function is called once on the string used to create the QString object.
|
|
ebcee1de2 bips: add bip176 (Bits Denomination) (William Casarin)
275b2eeed [qt] change µBTC to bits (William Casarin)
Pull request description:
Now that we have bip176, change "µBTC" to the more colloquial "bits"
Tree-SHA512: eba5e5f89c392728a4f0a3bd81a9779a117b8d72a490390fd031d4e7cc56c2bfee0016aba7ef9535903e8cf2262ce46497283424e378906d0e3bf5b0d2d981c7
|
|
6dda059bd [qt] Simplifies boolean expression model && model->haveWatchOnly() (251)
Pull request description:
This PR optimizes the boolean expression `model && model->haveWatchOnly()` to `model->haveWatchOnly()`.
The boolean expression can be optimized because the method `TransactionView::exportClicked` already guards against a potential dereferenced null pointer by returning early if `model` is null.
https://github.com/bitcoin/bitcoin/blob/63a4dc10876bfc61c2e87d35dcf17da2f0f8c316/src/qt/transactionview.cpp#L351-L353
Tree-SHA512: 8bdd0d05bf879745fa39d3ca7524471720ae08ceee9427d5a08776e7b56d18542ae87a6991cd6779e232305f504fdfc77223702b72ecbe231f5f5e98453456dd
|
|
|
|
The boolean expression model && model->haveWatchOnly() can be simplified to model->haveWatchOnly(), because if (!model || !model->getOptionsModel()) { return; } guards against a potential dereferenced null pointer.
|
|
* Now that we have bip176, change "µBTC" to the more colloquial "bits"
* We retain the `µBTC (bits)` description in dropdowns and status bars.
The more concise "bits" is used when appended to numbers.
Signed-off-by: William Casarin <jb55@jb55.com>
|
|
5cbbbd7 [Wallet] Use RBF by default in QT only (Sjors Provoost)
Pull request description:
~If there are no objections, this would supersede #11556.~
Enabling RBF by default avoids the need to explain all possible use cases of RBF.
This PR does not change the default RPC wallet behavior, as this could break implementations that depend on it and it's not clear what happens when automated services suddenly switch on RBF on a large scale.
After trying various approaches, we settled on just having QT ignore `-walletrbf`.
Send screen:
<img width="388" alt="send" src="https://user-images.githubusercontent.com/10217/34251097-329c8dee-e63f-11e7-9e14-d7f55d2b52cc.png">
Confirmation screen by default (with RBF):
<img width="429" alt="rbf yes" src="https://user-images.githubusercontent.com/10217/32442799-f50d54aa-c2fc-11e7-9392-96339d0f1f74.png">
Confirmation screen without RBF:
<img width="431" alt="rf no" src="https://user-images.githubusercontent.com/10217/32442793-ef30bc34-c2fc-11e7-8ca2-e86a97175278.png">
Tree-SHA512: 53efb5d277144478143e69dcae8112c1b9c2beb981fdd0fe778592e5f7d5bf838f73d48052ead874586a75b944e8af469b25e5f376c135cf48cc3598e77f5891
|
|
GUI wallet uses RBF by default, regardless of -walletrbf.
RPC and debug console in the GUI remain unchanged; they don't
use RBF by default, unless launched with -walletrbf=1.
|
|
|
|
(bool, char, etc.)
99ba0c3 Don't use pass by reference to const for cheaply-copied types (bool, char, etc.). (practicalswift)
Pull request description:
Don't use pass by reference to const for cheaply-copied types (`bool`, `char`, etc.).
Tree-SHA512: ccad5e2695dff0b3d6de3e713ff3448f2981168cdac72d73bee10ad346b9919d8d4d588933369e54657a244b8b222fa0bef919bc56d983e1fa64b2004e51b225
|
|
file already included
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
|
|
f05d349 gui: Fix proxy setting options dialog crash (Wladimir J. van der Laan)
Pull request description:
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to out of bounds when the user manages to enter invalid proxy settings. This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can still be rejected by the core with an InitError message.
Tree-SHA512: 72b700b7d6c4d3e3410f0c60e9e4facf93d7c6c1a1b6b23957c48b074a045970f518166952859d1ebca8620062cb70d222670a7310bbd6fe50550ec6d04417b5
|
|
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to
out of bounds when the user manages to enter invalid proxy settings.
This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic
values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no
longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can
still be rejected by the core with an InitError message.
|
|
db0b7373f [Qt] Improved copy: RBF checkbox, tooltip and confirmation screen (Sjors Provoost)
Pull request description:
Fixes #11344 and replaces #11428.
**Before**:
<img width="588" alt="before" src="https://user-images.githubusercontent.com/10217/31984211-3299e81a-b993-11e7-94e9-bf63d2fed4bd.png">
**After**:
<img width="578" alt="after" src="https://user-images.githubusercontent.com/10217/31984404-11f839da-b994-11e7-86ad-4c17a7d44b86.png">
Tree-SHA512: 04876b2f2eab53c8d4fd4279e8384fd4869af7e15de7648b2689092f800b6ae9c890c01c26c2f7deffe79a1d70c6440d702cbe420e44fe3ded25c5b83d44ecfa
|
|
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
|
|
eac2abca0 Qt: Enable searching by transaction id (Luke Dashjr)
c407c61c5 Qt: Avoid invalidating the search filter, when it doesn't really change (Luke Dashjr)
b1f634242 Qt: Rename confusingly-named "address prefix" to "search string" (Luke Dashjr)
Pull request description:
Tree-SHA512: 1c67037d19689fbaff21d15ed7848ac86188e5de34728312e1f9758dada759cab50d913a5bc09e413ecaa3e07557cf253809b95b5637ff79f2e3cf24d86dd3ed
|
|
* SetAddressBook(...) is locking cs_wallet internally
* DelAddressBook(...) is locking cs_wallet internally
|
|
c3055bb Add help-console command to Qt debug console (Luke Mlsna)
Pull request description:
This PR would close issue #9195 by adding documentation for the debug console features (mainly nested commands) which were added in [PR #7783](https://github.com/bitcoin/bitcoin/pull/7783).
The following changes were made to QT debug console code:
- Added a line to the initial message text at the top of the debug console:
> For more information on using this console type **help-console**.
- Added a pseudo-command `help-console` which is hooked after parsing the request, but before actually executing the RPC thread. It prints the following text to the console as if it were a valid RPC response.
> This console accepts RPC commands using the standard syntax.
> example: getblockhash 8
> This console can also accept RPC commands using bracketed syntax.
> example: getblockhash(8)
> A space or a comma can be used to separate arguments for either syntax.
> example: sendtoaddress \<address\> \<amount\>
> sendtoaddress,\<address\>,\<amount\>
> Commands may be nested when specified with the bracketed syntax.
> example: getblockinfo(getblockhash(0),true).
> Result values can be queried with a non-quoted string in brackets.
> example: getblock(getblockhash(0) true)[height]
This seemed like a reasonably sane way to introduce a fake RPC help command, but
Tree-SHA512: 35d73dcef9c4936b8be99e80978169f117c22b94f4400c91097bf7e0e1489060202dcd738d9debdf4c8a7bd10709e2c19d4f625f19e47c4a034f1d6019c0e0f2
|
|
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes #11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
|
|
Opt-in RBF checkbox uses less technical jargon and emphasises
the fee bump functionality (at the expense of not mentioning
other uses of RBF).
The transaction confirmation screen uses copy consistent with this.
|
|
- Added `help-console` to the list of autocompletion strings
- Implemented requested changes to help message:
- Added an example that uses access-by-index `getblock(getblockhash(0) true)[tx][0]`
- Replace "bracketed syntax" to "parenthesized syntax" where applicable
- Replace "separate" with "delimit"
- Removed `<br>` and `<b>help/help-console</b>` from translation strings, since these parts don't change between languages
- Changed examples to be based off `getblock 0` so they will work even with pruned/no blockchain and `disablewallet` if copied and pasted
- Clarified syntax for queries of named/unnamed result objects.
|
|
*wallet)
446e261 [qt] Fix potential memory leak in newPossibleKey(ChangeCWallet *wallet) (practicalswift)
Pull request description:
Fix potential memory leak in `newPossibleKey(ChangeCWallet *wallet)`.
Tree-SHA512: 252d3828133a0d241cc649aed1280e14a5d5ea47b7b2989039cfa5061a8e35183c7f36d7320aa0ac1b4dcab31e584b358dbbb2fe645a412371d0a460878e2b58
|
|
|
|
|
|
included
|
|
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
|
|
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
aed1d90ac [wallet] Change feebumper from class to functions (Russell Yanofsky)
37bdcca3c [refactor] Make feebumper namespace (Russell Yanofsky)
7c4f00919 [trivial] Rename feebumper variables according to project code style (Russell Yanofsky)
Pull request description:
Make feebumper methods static and remove stored state in the class.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper methods static, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
- Rename CFeeBumper class to FeeBumper (every CFeeBumper reference had to be
updated in this PR anyway so this doesn't increase the size of the diff)
This change was originally part of https://github.com/bitcoin/bitcoin/pull/10244
Tree-SHA512: bf75e0c741b4e9c8912e66cc1dedf0ff715f77ea65fc33f7020d97d9099b0f6448f5852236dac63eea649de7d6fc03b0b21492e2c5140fb7560a39cf085506fd
|
|
927f4ff5a GUI: Receive: Remove option to reuse a previous address (Luke Dashjr)
Pull request description:
This was justified by the need to "resent" an invoice, but now that we have the request history, that need should be gone.
Tree-SHA512: 4ade4eb84a21bbbd8dcc3a2c9580d416e113284b5bdf350c22051c233101fe0ee31659c54a7a46e7136f9c999acb61efbbb3f97aeb2fa7b2b1e1daec02ca0837
|
|
This was justified by the need to "resent" an invoice, but now that we have the request history, that need should be gone.
|
|
Change feebumper from a stateful class into a namespace of stateless
functions.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper stateless, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
|
|
Future commit will remove the FeeBumper class. This commit simply places
everything into a feebumper namespace, and changes the enum class name
from BumpeFeeResult to feebumper::Result.
|
|
Future PRs will completely refactor this translation unit and touch all
this code so we rename the variables to follow project stlye guidelines
in this preparation commit.
Don't use m_ prefixes for member variables since we're going to remove
the class entirely in the next commits.
|
|
109a85899 tests: Add missing locks to tests (practicalswift)
Pull request description:
Add missing locks to tests to satisfy lock requirements (such as `EXCLUSIVE_LOCKS_REQUIRED(...)` (Clang Thread Safety Analysis, see #11226), `AssertLockHeld(...)` and implicit lock assumptions).
Tree-SHA512: 1aaeb1da89df1779f02fcceff9d2f8ea24a3926d421f9ea305a19be04dd0b3e63d91f6c1ed22fb7e6988343f6a5288829a387ef872cfa7b6add57bd01046b5d9
|
|
Add missing locks to tests to satisfy lock requirements (such as
EXCLUSIVE_LOCKS_REQUIRED(...) (Clang Thread Safety Analysis),
AssertLockHeld(...) and implicit lock assumptions).
|
|
promag)
d052e3847 [qt] Add use available balance in send coins dialog (CryptAxe)
Pull request description:
This is an alternative to #11098 to handle #11033 where a new button `Use available balance` is added to each entry. When activated, the available balance is calculated by using the coin control (if any) and then it's subtracted the remaining recipient amounts. If this amount is positive then the `Subtract fee from amount` is automatically selected.
Comparing to #11098, this has the advantage to avoid the fair amount division over the recipients and allows to fine adjust the amounts in multiple iterations.
Started from @CryptAxe commit 89e9eda to credit some code.
<img width="965" alt="screen shot 2017-09-13 at 01 32 44" src="https://user-images.githubusercontent.com/3534524/30354518-e1bee31c-9824-11e7-9354-300aa63cdfd0.png">
<img width="964" alt="screen shot 2017-09-13 at 01 44 57" src="https://user-images.githubusercontent.com/3534524/30354598-5731ac9c-9825-11e7-9d5f-8781988ed219.png">
Tree-SHA512: 01d20c13fd8b6c2a0ca1d74d3a9027c6922e6dccd3b08e59d5a72636be7072ed5eca7ebc5d431299497dd3374e83753220ad4174d8bc46dadb4b2f54973036a5
|
|
|
|
|
|
|
|
a357293 Use MakeUnique<Db>(...) (practicalswift)
3e09b39 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) (practicalswift)
8617989 Add MakeUnique (substitute for C++14 std::make_unique) (practicalswift)
d223bc9 Use unique_ptr for pcoinscatcher/pcoinsdbview/pcoinsTip/pblocktree (practicalswift)
b45c597 Use unique_ptr for pdbCopy (Db) and fix potential memory leak (practicalswift)
29ab96d Use unique_ptr for dbenv (DbEnv) (practicalswift)
f72cbf9 Use unique_ptr for pfilter (CBloomFilter) (practicalswift)
8ccf1bb Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) (practicalswift)
73db063 Use unique_ptr for upnp_thread (boost::thread) (practicalswift)
0024531 Use unique_ptr for dbw (CDBWrapper) (practicalswift)
fa6d122 Use unique_ptr:s for {fee,short,long}Stats (TxConfirmStats) (practicalswift)
5a6f768 Use unique_ptr for httpRPCTimerInterface (HTTPRPCTimerInterface) (practicalswift)
860e912 Use unique_ptr for pwalletMain (CWallet) (practicalswift)
Pull request description:
Use `std::unique_ptr` (C++11) where possible.
Rationale:
1. Avoid resource leaks (specifically: forgetting to `delete` an object created using `new`)
2. Avoid undefined behaviour (specifically: double `delete`:s)
**Note to reviewers:** Please let me know if I've missed any obvious `std::unique_ptr` candidates. Hopefully this PR should cover all the trivial cases.
Tree-SHA512: 9fbeb47b800ab8ff4e0be9f2a22ab63c23d5c613a0c6716d9183db8d22ddbbce592fb8384a8b7874bf7375c8161efb13ca2197ad6f24b75967148037f0f7b20c
|
|
* pcoinscatcher (CCoinsViewErrorCatcher)
* pcoinsdbview (CCoinsViewDB)
* pcoinsTip (CCoinsViewCache)
* pblocktree (CBlockTreeDB)
* Remove variables shadowing pcoinsdbview
|
|
|
|
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
|
|
b109a1c Remove redundant nullptr checks before deallocation (practicalswift)
Pull request description:
Rationale:
* `delete ptr` is a no-op if `ptr` is `nullptr`
Tree-SHA512: c98ce769125c4912186a8403cc08a59cfba85b7141af645c709b4c4eb90dd9cbdd6ed8076d50099d1e4ec2bf75917d1af6844082ec42bbb4d94d229a710e051c
|
|
ff35de8 [ui] Add toggle for unblinding password fields (Thomas Snider)
Pull request description:
Proposed change for adding the ability to toggle password visibility in the password dialog. This is similar to functionality in most password managers and is specifically added with the use case of password managers in mind - the password in that case is likely pasted twice into both the new password and confirm password fields.
If this is a welcome change, I am open to suggestions on rearranging the layout.
Tree-SHA512: 1823f356f8f941cc584c44de264433e9a573cb8a358efa300a412c4458b5564d8d193969be40859195cf9c8d6768eee895ee22440d51db4f09175f9b4e28bced
|
|
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
|
