| Age | Commit message (Collapse) | Author |
|---|
|
CFeeRate and CTxMemPoolEntry have explicitly defined copy ctors which has the same functionality as the implicit default copy ctors which would have been generated otherwise.
Besides being redundant, it violates the rule of three (see https://en.wikipedia.org/wiki/Rule_of_three_(C%2B%2B_programming) ).
(Of course, the rule of three doesn't -really- cause a resource management issue here, but the reason for that is exactly that there is no need for an explicit copy ctor in the first place since no resources are being managed).
CFeeRate has an explicitly defined copy ctor which has the same functionality as the implicit default copy ctor which would h
ave been generated otherwise.
|
|
In order to avoid unintended implicit conversions.
|
|
"condition".
5a6671c Fix typo: "conditon" → "condition" (practicalswift)
35aff43 Remove unused variable int64_t nEnd (practicalswift)
Pull request description:
* Remove unused variable `int64_t nEnd`. Last use of `nEnd` removed in commit 1fc8c3d.
* Fix typo: "conditon" → "condition". Typo introduced in commit 439c4e8.
Tree-SHA512: 61624e6f70828c485fe46dbe00df76f1a07b7a5849d41bf7d279323b687420e60e9b85192f611a37211f17f3dea8eb3f6f6dc65d90c92e5516404fd81d37785a
|
|
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
|
|
Typo introduced in commit 439c4e8ad5871f59d87ae2ab77fe01aa6fe41414.
|
|
Change parameter for conservative estimates to be an estimate_mode string.
Change to never return a -1 for failure but to instead omit the feerate and
return an error string. Throw JSONRPC error on invalid nblocks parameter.
|
|
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
|
|
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
|
|
match actual parameter names.
|
|
|
|
This check has been moved to the wallet logic GetMinimumFee. The rpc call to
estimatesmartfee will now no longer return a result maxed with the mempool min
fee, but automated fee calculations from the wallet will produce the same result
as before and coincontrol and sendcoins dialogs in the GUI will correctly
display the right prospective fee.
changes to policy/fees.cpp include a big whitespace indentation change.
|
|
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
|
|
5e3b7b5 Improve error reporting for estimaterawfee (Alex Morcos)
1fafd70 Add function to report highest estimate target tracked per horizon (Alex Morcos)
9c85b91 Change API to estimaterawfee (Alex Morcos)
Tree-SHA512: e624c6e7967e9e48abe49f5818bd674e5710e571cc093029d2f90d39fdfba3c1f30e83bf89f6dce97052b59a7d9636a64642ccfb26effd149c417d0afbed0c0b
|
|
|
|
Report results for all 3 possible time horizons instead of specifying time horizon as an argument.
|
|
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
|
|
|
|
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
|
|
b1268a1 clang-format: Delete ForEachMacros (Jorge Timón)
5995735 scripted-diff: Remove #include <boost/foreach.hpp> (Jorge Timón)
3eff827 scripted-diff: Remove BOOST_REVERSE_FOREACH (Jorge Timón)
33aed5b Fix const_reverse_iterator constructor (pass const ptr) (Jorge Timón)
300851e Introduce src/reverse_iterator.hpp and include it... (Jorge Timón)
Tree-SHA512: df3405328e9602d0a433ac134ba59a5c9a6202ef64188df2f94a59b2ce58dec7c988b25d0671c7937de516a96b2e6daeb9d04c82fa363b616ee4cf6e9cb0fac6
|
|
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
|
|
-BEGIN VERIFY SCRIPT-
sed -i ':a;N;$!ba;s/#include <boost\/foreach.hpp>\n//' ./src/*.h ./src/*.cpp ./src/*/*.h ./src/*/*.cpp ./src/*/*/*.h ./src/*/*/*.cpp
-END VERIFY SCRIPT-
|
|
CreateTransaction
1bebfc8 Output Fee Estimation Calculations in CreateTransaction (Alex Morcos)
Tree-SHA512: e25a27f7acbbc3a666d5d85da2554c5aaec4c923ee2fdbcfc532c29c6fbdec3c9e0d6ae6044543ecc339e7bd81df09c8d228e0b53a2c5c2dae0f1098c9453272
|
|
1238f13cf scripted-diff: Remove PAIRTYPE (Jorge Timón)
18dc3c396 scripted-diff: Remove Q_FOREACH (Jorge Timón)
7c00c2672 scripted-diff: Fully remove BOOST_FOREACH (Jorge Timón)
a5410ac5e Small preparations for Q_FOREACH, PAIRTYPE and #include <boost/foreach.hpp> removal (Jorge Timón)
Tree-SHA512: d3ab4a173366402e7dcef31608977b757d4aa07abbbad2ee1bcbcfa311e994a4552f24e5a55272cb22c2dcf89a4b0495e02e9d9aceae4b08c0bab668f20e324c
|
|
|
|
90593ed92 Limit variable scope (practicalswift)
Tree-SHA512: 4719e303688a31aefbe1d239e86b21dd3c2045524e08bd628c6ba0c6c2a97de14d04305b9beafe0b1dcde7229793e6663168953f192e88ed409be5c30fd2a9a9
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/BOOST_FOREACH *(\(.*\),/for (\1 :/' ./src/*.h ./src/*.cpp ./src/*/*.h ./src/*/*.cpp ./src/*/*/*.h ./src/*/*/*.cpp ;
-END VERIFY SCRIPT-
|
|
8d4f401 Fix timestamp in fee estimate debug message (Alex Morcos)
Tree-SHA512: eb015ddbb9f52f0f84706a16e503d2894dceed4e796979858ca8bdd7f0ec15bf7646ca3f411b06ff099308c91ca498916778e6bd52db00365baaae1d2f4218f2
|
|
|
|
They're doing the same thing now.
|
|
efc2e3302 [trivial] Fix three recently introduced typos (practicalswift)
Tree-SHA512: 99e97f3c1350299dfce9c0c35547d480f25c0b877da311d9120f113afd3089eda31b88b2378e2370f288b0c41bb69cee0fd3abca661cd93d5a56982f90709f91
|
|
elements
211adc0 Use range-based for loops (C++11) when looping over vector elements (practicalswift)
Tree-SHA512: 0e007f20dcef99d3c7a1036265e00f689d69f42e02fd82dd8389f45b52d31947e5f9388de2610d3d9bd9f554915ce0d35ebce561e5ae3a9013956d0ee4937145
|
|
```
$ git blame src/policy/fees.cpp | grep becuase
3810e976 (2017-03-07 11:33:44 -0500 789) * checks for 2*target becuase we are taking the max over all time
$ git blame src/policy/fees.h | grep successfullly
2d2e1705 (2017-04-12 12:29:03 -0400 54) * representing that a tx was successfullly confirmed in less than or equal to
$ git blame src/wallet/feebumper.cpp | grep "hasen't"
a3878374 (2017-05-11 09:34:39 +0200 258) // make sure the transaction still has no descendants and hasen't been mined in the meantime
```
|
|
|
|
|
|
|
|
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
|
|
|
|
|
|
For the per confirmation number tracking of data, introduce a scale factor so that in the longer horizones confirmations are bucketed together at a resolution of the scale. (instead of 1008 individual data points for each fee bucket, have 42 data points each covering 24 different confirmation values.. (1-24), (25-48), etc.. )
|
|
Store in fee estimate file the block span for which we were tracking estimates, so we know what targets we can successfully evaluate with the data in the file. When restarting use either this historical block span to set valid range of targets until our current span of tracking estimates is just as long.
|
|
|
|
Track the first time we seen txs in a block that we have been tracking in our mempool. Used to evaluate validity of fee estimates for different targets.
|
|
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
|
|
Start tracking transactions which fail to confirm within the target and are then evicted or otherwise leave mempool.
Fix slight error in unit test.
|
|
Track information the ranges of fee rates that were used to calculate the fee estimates (the last range of fee rates in which the data points met the threshold and the first to fail) and provide an RPC call to return this information.
|
|
curNearBucket on final loop.
|
|
Instead of stopping if it encounters a "sufficient" number of transactions which don't meet the threshold for being confirmed within the target, it keeps looking to add more transactions to see if there is a temporary blip in the data. This allows a smaller number of required data points.
|
|
|
|
Make feerate buckets smaller (5% instead of 10%) and make the 3 different horizons have half lifes of 3 hours, 1 day and 1 week respectively.
|
