| Age | Commit message (Collapse) | Author |
|---|
|
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
|
|
|
|
|
|
0.15.0 introduced a new feeest file format, and support for parsing
old versions was never fully added. We now simply fail to read the
old format, so remove the dead partial-implementation.
|
|
3a3a9f9 Ignore old format estimation file (Murch)
Pull request description:
The fee estimation data format changed from 0.14.x to 0.15.0, so we should no longer read the old data. H/T @jnewbery, @morcos
Pending testing.
Tree-SHA512: c8e3824dbdd8f6730133d5ad20b00995e9a63ab54431158a91e2f4d2aba5763b8aa698bce1fffca2713ba3a162e23d8fcd6e3efb9847b015c2e1e8725398150b
|
|
included
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
|
|
|
|
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
|
|
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
|
|
|
|
This resolves an issue where estimatesmartfee would return 999
sat/byte instead of 1000, due to floating point loss of precision
Thanks to sipa for suggesting is_integral.
|
|
|
|
No sensible user will ever keep the default settings here, so not
having sensible defaults only serves to screw users who are
paying less attention, which makes for terrible defaults.
|
|
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
|
|
|
|
implementation
ca67ddf0b Move the AreInputsStandard documentation next to its implementation (esneider)
Pull request description:
The documentation (and rationale) for `AreInputsStandard` somehow got separated from its implementation, and creates a bit of confusion: it's in the middle of the file, next to the implementation of `IsStandard`, which actually checks the "standardness" of outputs, not inputs.
Tree-SHA512: 71281cbcbc5a5701cc11e812a3e90669dda3d92dc2176b512b7832d79b08b34307999c984516bb0c56b01db9b03a12ee4755f662efc1158f4e126de5ca421999
|
|
|
|
CFeeRate and CTxMemPoolEntry have explicitly defined copy ctors which has the same functionality as the implicit default copy ctors which would have been generated otherwise.
Besides being redundant, it violates the rule of three (see https://en.wikipedia.org/wiki/Rule_of_three_(C%2B%2B_programming) ).
(Of course, the rule of three doesn't -really- cause a resource management issue here, but the reason for that is exactly that there is no need for an explicit copy ctor in the first place since no resources are being managed).
CFeeRate has an explicitly defined copy ctor which has the same functionality as the implicit default copy ctor which would h
ave been generated otherwise.
|
|
In order to avoid unintended implicit conversions.
|
|
"condition".
5a6671c Fix typo: "conditon" → "condition" (practicalswift)
35aff43 Remove unused variable int64_t nEnd (practicalswift)
Pull request description:
* Remove unused variable `int64_t nEnd`. Last use of `nEnd` removed in commit 1fc8c3d.
* Fix typo: "conditon" → "condition". Typo introduced in commit 439c4e8.
Tree-SHA512: 61624e6f70828c485fe46dbe00df76f1a07b7a5849d41bf7d279323b687420e60e9b85192f611a37211f17f3dea8eb3f6f6dc65d90c92e5516404fd81d37785a
|
|
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
|
|
Typo introduced in commit 439c4e8ad5871f59d87ae2ab77fe01aa6fe41414.
|
|
Change parameter for conservative estimates to be an estimate_mode string.
Change to never return a -1 for failure but to instead omit the feerate and
return an error string. Throw JSONRPC error on invalid nblocks parameter.
|
|
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
|
|
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
|
|
match actual parameter names.
|
|
|
|
This check has been moved to the wallet logic GetMinimumFee. The rpc call to
estimatesmartfee will now no longer return a result maxed with the mempool min
fee, but automated fee calculations from the wallet will produce the same result
as before and coincontrol and sendcoins dialogs in the GUI will correctly
display the right prospective fee.
changes to policy/fees.cpp include a big whitespace indentation change.
|
|
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
|
|
5e3b7b5 Improve error reporting for estimaterawfee (Alex Morcos)
1fafd70 Add function to report highest estimate target tracked per horizon (Alex Morcos)
9c85b91 Change API to estimaterawfee (Alex Morcos)
Tree-SHA512: e624c6e7967e9e48abe49f5818bd674e5710e571cc093029d2f90d39fdfba3c1f30e83bf89f6dce97052b59a7d9636a64642ccfb26effd149c417d0afbed0c0b
|
|
|
|
Report results for all 3 possible time horizons instead of specifying time horizon as an argument.
|
|
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
|
|
|
|
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
|
|
b1268a1 clang-format: Delete ForEachMacros (Jorge Timón)
5995735 scripted-diff: Remove #include <boost/foreach.hpp> (Jorge Timón)
3eff827 scripted-diff: Remove BOOST_REVERSE_FOREACH (Jorge Timón)
33aed5b Fix const_reverse_iterator constructor (pass const ptr) (Jorge Timón)
300851e Introduce src/reverse_iterator.hpp and include it... (Jorge Timón)
Tree-SHA512: df3405328e9602d0a433ac134ba59a5c9a6202ef64188df2f94a59b2ce58dec7c988b25d0671c7937de516a96b2e6daeb9d04c82fa363b616ee4cf6e9cb0fac6
|
|
|
|
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
|
|
-BEGIN VERIFY SCRIPT-
sed -i ':a;N;$!ba;s/#include <boost\/foreach.hpp>\n//' ./src/*.h ./src/*.cpp ./src/*/*.h ./src/*/*.cpp ./src/*/*/*.h ./src/*/*/*.cpp
-END VERIFY SCRIPT-
|
|
CreateTransaction
1bebfc8 Output Fee Estimation Calculations in CreateTransaction (Alex Morcos)
Tree-SHA512: e25a27f7acbbc3a666d5d85da2554c5aaec4c923ee2fdbcfc532c29c6fbdec3c9e0d6ae6044543ecc339e7bd81df09c8d228e0b53a2c5c2dae0f1098c9453272
|
|
1238f13cf scripted-diff: Remove PAIRTYPE (Jorge Timón)
18dc3c396 scripted-diff: Remove Q_FOREACH (Jorge Timón)
7c00c2672 scripted-diff: Fully remove BOOST_FOREACH (Jorge Timón)
a5410ac5e Small preparations for Q_FOREACH, PAIRTYPE and #include <boost/foreach.hpp> removal (Jorge Timón)
Tree-SHA512: d3ab4a173366402e7dcef31608977b757d4aa07abbbad2ee1bcbcfa311e994a4552f24e5a55272cb22c2dcf89a4b0495e02e9d9aceae4b08c0bab668f20e324c
|
|
|
|
90593ed92 Limit variable scope (practicalswift)
Tree-SHA512: 4719e303688a31aefbe1d239e86b21dd3c2045524e08bd628c6ba0c6c2a97de14d04305b9beafe0b1dcde7229793e6663168953f192e88ed409be5c30fd2a9a9
|
|
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/BOOST_FOREACH *(\(.*\),/for (\1 :/' ./src/*.h ./src/*.cpp ./src/*/*.h ./src/*/*.cpp ./src/*/*/*.h ./src/*/*/*.cpp ;
-END VERIFY SCRIPT-
|
|
8d4f401 Fix timestamp in fee estimate debug message (Alex Morcos)
Tree-SHA512: eb015ddbb9f52f0f84706a16e503d2894dceed4e796979858ca8bdd7f0ec15bf7646ca3f411b06ff099308c91ca498916778e6bd52db00365baaae1d2f4218f2
|
|
|
|
They're doing the same thing now.
|
