aboutsummaryrefslogtreecommitdiff
path: root/src/net.cpp
AgeCommit message (Collapse)Author
2020-11-20net: Treat raw message bytes as uint8_tMarcoFalke
2020-11-20Merge #20056: net: Use Span in ReceiveMsgBytesWladimir J. van der Laan
fa5ed3b4ca609426b2622cad235e107d33db7b30 net: Use Span in ReceiveMsgBytes (MarcoFalke) Pull request description: Pass a data pointer and a size as span in `ReceiveMsgBytes` to get the benefits of a span ACKs for top commit: jonatack: ACK fa5ed3b4ca609426b2622cad235e107d33db7b30 code review, rebased to current master 12a1c3ad1a43634, debug build, unit tests, ran bitcoind/-netinfo/getpeerinfo theStack: ACK fa5ed3b4ca609426b2622cad235e107d33db7b30 Tree-SHA512: 89bf111323148d6e6e50185ad20ab39f73ab3a58a27e46319e3a08bcf5dcf9d6aa84faff0fd6afb90cb892ac2f557a237c144560986063bc736a69ace353ab9d
2020-11-18CConnman: initialise at declaration rather than in Start()Anthony Towns
Ensure nMaxOutboundTotalBytesSentInCycle and nMaxOutboundCycleStartTime are initialized even if CConnman::Start() is not called.
2020-11-04Make it easier to reason about node eviction by removing unused ↵practicalswift
NodeEvictionCandidate::addr (CAddress)
2020-10-27Avoid test-before-evict evictions of current peersSuhas Daftuar
Outbound peer logic prevents connecting to addresses that we're already connected to, so prevent inadvertent eviction of current peers via test-before-evict by checking this condition and marking current peer's addresses as Good(). Co-authored-by: John Newbery <john@johnnewbery.com>
2020-10-27Refactor test for existing peer connection into own functionSuhas Daftuar
2020-10-27Avoid calling CAddrMan::Connected() on block-relay-only peer addressesSuhas Daftuar
Connected() updates the time we serve in addr messages, so avoid leaking block-relay-only peer connections by avoiding these calls.
2020-10-15Merge #17428: p2p: Try to preserve outbound block-relay-only connections ↵Wladimir J. van der Laan
during restart a490d074b3491427afbd677f5fa635b910f8bb34 doc: Add anchors.dat to files.md (Hennadii Stepanov) 0a85e5a7bc8dc6587963e2e37ac1b087a1fc97fe p2p: Try to connect to anchors once (Hennadii Stepanov) 5543c7ab285e90256cbbf9858249e028c9611cda p2p: Fix off-by-one error in fetching address loop (Hennadii Stepanov) 4170b46544231e7cf1d64ac3baa314083be37502 p2p: Integrate DumpAnchors() and ReadAnchors() into CConnman (Hennadii Stepanov) bad16aff490dcf87722fbfe202a869fb24c734e1 p2p: Add CConnman::GetCurrentBlockRelayOnlyConns() (Hennadii Stepanov) c29272a157d09a8125788c1b860e89b63b4cb36c p2p: Add ReadAnchors() (Hennadii Stepanov) 567008d2a0c95bd972f4031f31647c493d1bc2e8 p2p: Add DumpAnchors() (Hennadii Stepanov) Pull request description: This is an implementation of #17326: - all (currently 2) outbound block-relay-only connections (#15759) are dumped to `anchors.dat` file - on restart a node tries to connect to the addresses from `anchors.dat` This PR prevents a type of eclipse attack when an attacker exploits a victim node restart to force it to connect to new, probably adversarial, peers. ACKs for top commit: jnewbery: code review ACK a490d074b3 laanwj: Code review ACK a490d074b3491427afbd677f5fa635b910f8bb34 Tree-SHA512: 0f5098a3882f2814be1aa21de308cd09e6654f4e7054b79f3cfeaf26bc02b814ca271497ed00018d199ee596a8cb9b126acee8b666a29e225b08eb2a49b02ddd
2020-10-14net: add peer network to CNodeStatsJon Atack
2020-10-09p2p: Try to connect to anchors onceHennadii Stepanov
2020-10-09p2p: Fix off-by-one error in fetching address loopHennadii Stepanov
This is a move-only commit.
2020-10-09p2p: Integrate DumpAnchors() and ReadAnchors() into CConnmanHennadii Stepanov
2020-10-09p2p: Add CConnman::GetCurrentBlockRelayOnlyConns()Hennadii Stepanov
2020-10-03net: Add CNode::ConnectedThroughNetwork member functionHennadii Stepanov
2020-10-03net: Add CNode::m_inbound_onion data memberHennadii Stepanov
2020-10-02net: Use Span in ReceiveMsgBytesMarcoFalke
2020-10-02Merge #19991: net: Use alternative port for incoming Tor connectionsWladimir J. van der Laan
96571b3d4cb4cda0fd3d5a457ae4a12f615de82b doc: Update onion service target port numbers in tor.md (Hennadii Stepanov) bb145c9050203b3f3d8bff10fb3bba31da51adb1 net: Extend -bind config option with optional network type (Hennadii Stepanov) 92bd3c1da48d17c8ba20349e18ad19051614bc1a net, refactor: Move AddLocal call one level up (Hennadii Stepanov) 57f17e57c8c410e10c16a46f7372c0ea8b7dd467 net: Pass onion service target to Tor controller (Hennadii Stepanov) e3f07851f02857b4844fccb2e91070c5cd3aad4d refactor: Rename TorController::target to m_tor_control_center (Hennadii Stepanov) fdd3ae4d264f26f87009879838dec035db5a7aed net, refactor: Refactor CBaseChainParams::RPCPort function (Hennadii Stepanov) a5266d4546c444cfd6d36cb63d2df52ce9e689e2 net: Add alternative port for onion service (Hennadii Stepanov) b3273cf4039d26e66ae58a8acb9d865461618d54 net: Use network byte order for in_addr.s_addr (Hennadii Stepanov) Pull request description: This PR adds ability to label incoming Tor connections as different from normal localhost connections. Closes #8973. Closes #16693. Default onion service target ports are: - 8334 on mainnnet - 18334 on testnet - 38334 on signet - 18445 on regtest To set the onion service target socket manually the extended `-bind` config option could be used: ``` $ src/bitcoind -help | grep -A 6 -e '-bind' -bind=<addr>[:<port>][=onion] Bind to given address and always listen on it (default: 0.0.0.0). Use [host]:port notation for IPv6. Append =onion to tag any incoming connections to that address and port as incoming Tor connections (default: 127.0.0.1:8334=onion, testnet: 127.0.0.1:18334=onion, signet: 127.0.0.1:38334=onion, regtest: 127.0.0.1:18445=onion) ``` Since [pr19991.02 update](https://github.com/bitcoin/bitcoin/pull/19991#issuecomment-698882284) this PR is an alternative to #19043. ACKs for top commit: Sjors: re-utACK 96571b3d4cb4cda0fd3d5a457ae4a12f615de82b vasild: ACK 96571b3d4 laanwj: Re-ACK 96571b3d4cb4cda0fd3d5a457ae4a12f615de82b Tree-SHA512: cb0eade80f4b3395f405f775e1b89c086a1f09d5a4464df6cb4faf808d9c2245474e1720b2b538f203f6c1996507f69b09f5a6e35ea42633c10e22bd733d4438
2020-10-01net: Extend -bind config option with optional network typeHennadii Stepanov
2020-10-01net, refactor: Move AddLocal call one level upHennadii Stepanov
This change simplifies the following commit.
2020-09-30Merge #19958: doc: Better document features of feelersfanquake
2ea62cae483b764e30f61c06d8ac65755bbd864c Improve docs about feeler connections (Gleb Naumenko) Pull request description: "feeler" and "test-before-evict" are two different strategies suggest in [Eclipse Attacks on Bitcoin’s Peer-to-Peer Network](https://www.usenix.org/system/files/conference/usenixsecurity15/sec15-paper-heilman.pdf). In our codebase, we use `ConnType::FEELER` to implement both. It is confusing, up to the point that our documentation was just incorrect. This PR: - ~clarifies this aspect by renaming "ConnType::FEELER" to "ConnType::PROBE", meaning that this connections only probes that the node is operational, and then disconnects.~ - fixes the documentation ACKs for top commit: amitiuttarwar: ACK 2ea62cae48. thank you! practicalswift: ACK 2ea62cae483b764e30f61c06d8ac65755bbd864c Tree-SHA512: c9c03c09eefeacec28ea199cc3f697b0a98723f2f849f7a8115edc43791f8165e296e0e25a82f0b5a4a781a7de38c8954b48bf74c714eba02cdc21f7460673e5
2020-09-29Merge #19107: p2p: Move all header verification into the network layer, ↵fanquake
extend logging deb52711a17236d0fca302701b5af585341ab42a Remove header checks out of net_processing (Troy Giorshev) 52d4ae46ab822d0f54e246a6f2364415cda149bd Give V1TransportDeserializer CChainParams& member (Troy Giorshev) 5bceef6b12fa16d20287693be377dace3dfec3e5 Change CMessageHeader Constructor (Troy Giorshev) 1ca20c1af8f08f07c407c3183c37b467ddf0f413 Add doxygen comment for ReceiveMsgBytes (Troy Giorshev) 890b1d7c2b8312d41d048d2db124586c5dbc8a49 Move checksum check from net_processing to net (Troy Giorshev) 2716647ebf60cea05fc9edce6a18dcce4e7727ad Give V1TransportDeserializer an m_node_id member (Troy Giorshev) Pull request description: Inspired by #15206 and #15197, this PR moves all message header verification from the message processing layer and into the network/transport layer. In the previous PRs there is a change in behavior, where we would disconnect from peers upon a single failed checksum check. In various discussions there was concern over whether this was the right choice, and some expressed a desire to see how this would look if it was made to be a pure refactor. For more context, see https://bitcoincore.reviews/15206.html#l-81. This PR improves the separation between the p2p layers, helping improvements like [BIP324](https://github.com/bitcoin/bitcoin/pull/18242) and #18989. ACKs for top commit: ryanofsky: Code review ACK deb52711a17236d0fca302701b5af585341ab42a just rebase due to conflict on adjacent line jnewbery: Code review ACK deb52711a17236d0fca302701b5af585341ab42a. Tree-SHA512: 1a3b7ae883b020cfee1bef968813e04df651ffdad9dd961a826bd80654f2c98676ce7f4721038a1b78d8790e4cebe8060419e3d8affc97ce2b9b4e4b72e6fa9f
2020-09-29net: Use network byte order for in_addr.s_addrHennadii Stepanov
It is documented in the ip(7) manual page.
2020-09-24Improve docs about feeler connectionsGleb Naumenko
2020-09-22Remove header checks out of net_processingTroy Giorshev
This moves header size and netmagic checking out of net_processing and into net. This check now runs in ReadHeader, so that net can exit early out of receiving bytes from the peer. IsValid is now slimmed down, so it no longer needs a MessageStartChars& parameter. Additionally this removes the rest of the m_valid_* members from CNetMessage.
2020-09-22Give V1TransportDeserializer CChainParams& memberTroy Giorshev
This adds a CChainParams& member to V1TransportDeserializer member, and use it in place of many Params() calls. In addition to reducing the number of calls to a global, this removes a parameter from GetMessage (and will later allow us to remove one from CMessageHeader::IsValid())
2020-09-22Change CMessageHeader ConstructorTroy Giorshev
This commit removes the single-parameter contructor of CMessageHeader and replaces it with a default constructor. The single parameter contructor isn't used anywhere except for tests. There is no reason to initialize a CMessageHeader with a particular messagestart. This messagestart should always be replaced when deserializing an actual message header so that we can run checks on it. The default constructor initializes it to zero, just like the command and checksum. This also removes a parameter of a V1TransportDeserializer constructor, as it was only used for this purpose.
2020-09-22Add doxygen comment for ReceiveMsgBytesTroy Giorshev
2020-09-22Move checksum check from net_processing to netTroy Giorshev
This removes the m_valid_checksum member from CNetMessage. Instead, GetMessage() returns an Optional. Additionally, GetMessage() has been given an out parameter to be used to hold error information. For now it is specifically a uint32_t used to hold the raw size of the corrupt message. The checksum check is now done in GetMessage.
2020-09-22Give V1TransportDeserializer an m_node_id memberTroy Giorshev
This is intended to only be used for logging. This will allow log messages in the following commits to keep recording the peer's ID, even when logging is moved into V1TransportDeserializer.
2020-09-21[rpc] Add connection type to getpeerinfo RPC, update testsAmiti Uttarwar
2020-09-21[log] Add connection type to log statementAmiti Uttarwar
In addition to adding more specificity to the log statement about the type of connection, this change also consolidates two statements into one. Previously, the second one should have never been hit, since block-relay connections would match the "!IsInboundConn()" condition and return early.
2020-09-22Merge #17785: p2p: Unify Send and Receive protocol versionsWladimir J. van der Laan
ddefb5c0b759950942ac03f28c43b548af7b4033 p2p: Use the greatest common version in peer logic (Hennadii Stepanov) e084d45562b94827b3a7873895882fcaae9f4d48 p2p: Remove SetCommonVersion() from VERACK handler (Hennadii Stepanov) 8d2026796a6f7add0c2cda9806e759817d1eae6f refactor: Rename local variable nSendVersion (Hennadii Stepanov) e9a6d8b13b0558b17cdafbd32fd2663b4138ff11 p2p: Unify Send and Receive protocol versions (Hennadii Stepanov) Pull request description: On master (6fef85bfa3cd7f76e83b8b57f9e4acd63eb664ec) `CNode` has two members to keep protocol version: - `nRecvVersion` for received messages - `nSendVersion` for messages to send After exchanging with `VERSION` and `VERACK` messages via protocol version `INIT_PROTO_VERSION`, both nodes set `nRecvVersion` _and_ `nSendVersion` to _the same_ value which is the greatest common protocol version. This PR: - replaces two `CNode` members, `nRecvVersion` `nSendVersion`, with `m_greatest_common_version` - removes duplicated getter and setter There is no change in behavior on the P2P network. ACKs for top commit: jnewbery: ACK ddefb5c0b759950942ac03f28c43b548af7b4033 naumenkogs: ACK ddefb5c0b759950942ac03f28c43b548af7b4033 fjahr: Code review ACK ddefb5c0b759950942ac03f28c43b548af7b4033 amitiuttarwar: code review but untested ACK ddefb5c0b7 benthecarman: utACK `ddefb5c` Tree-SHA512: 5305538dbaa5426b923b0afd20bdef4f248d310855d1d78427210c00716c67b7cb691515c421716b6157913e453076e293b10ff5fd2cd26a8e5375d42da7809d
2020-09-21Merge #19697: Improvements on ADDR cachingWladimir J. van der Laan
0d04784af151de249bbbcbad51e6e8ad9af8f5a3 Refactor the functional test (Gleb Naumenko) 83ad65f31b5c9441ae1618614082e584854a14e1 Address nits in ADDR caching (Gleb Naumenko) 81b00f87800f40cb14f2131ff27668bd2bb9e551 Add indexing ADDR cache by local socket addr (Gleb Naumenko) 42ec5585424ceb91bed07826dde15697c020661a Justify the choice of ADDR cache lifetime (Gleb Naumenko) Pull request description: This is a follow-up on #18991 which does 3 things: - improves privacy of a node listening to multiple addresses via adding cache index by local socket addr (suggested [here](https://github.com/bitcoin/bitcoin/pull/18991#issuecomment-668219345)) - documents on the choice of 24h cache lifetime - addresses nits from #18991 ACKs for top commit: jnewbery: utACK 0d04784af151de249bbbcbad51e6e8ad9af8f5a3 vasild: ACK 0d04784 jonatack: Code review ACK 0d04784 Tree-SHA512: bb65a34dd1ce2811186d3e4469bc33e8399cebaaa494ce13041c7cff23275870e4176a719f7a72f8d779c49f8b2344bf4fa1aeb3ea4e2626d5ae76514f00a750
2020-09-07p2p: Use the greatest common version in peer logicHennadii Stepanov
2020-09-07p2p: Unify Send and Receive protocol versionsHennadii Stepanov
There is no change in behavior on the P2P network.
2020-09-03Merge #19670: Protect localhost and block-relay-only peers from evictionWladimir J. van der Laan
752e6ad5336d5af0db9fe16d24c0c6aa25b74a3f Protect localhost and block-relay-only peers from eviction (Suhas Daftuar) Pull request description: Onion peers are disadvantaged under our eviction criteria, so prevent eventual eviction of them in the presence of contention for inbound slots by reserving some slots for localhost peers (sorted by longest uptime). Block-relay-only connections exist as a protection against eclipse attacks, by creating a path for block propagation that may be unknown to adversaries. Protect against inbound peer connection slot attacks from disconnecting such peers by attempting to protect up to 8 peers that are not relaying transactions but have provided us with blocks. Thanks to gmaxwell for suggesting these strategies. ACKs for top commit: laanwj: Code review ACK 752e6ad5336d5af0db9fe16d24c0c6aa25b74a3f Tree-SHA512: dbf089c77c1f747aa1dbbbc2e9c2799c628028b0918d0c336d8d0e5338acedd573b530eb3b689c7f603a17221e557268a9f5c3f585f204bfb12e5d2e76de39a3
2020-09-02[doc] Follow developer notes, add comment about missing default.Amiti Uttarwar
2020-09-02[refactor] Simplify connection type logic in ThreadOpenConnectionsAmiti Uttarwar
Consolidate the logic to determine connection type into one conditional to clarify how they are chosen.
2020-09-02[trivial] Small style updatesAmiti Uttarwar
2020-09-02[refactor] Restructure logic to check for addr relay.Amiti Uttarwar
We previously identified if we relay addresses to the connection by checking for the existence of the m_addr_known data structure. With this commit, we answer this question based on the connection type. IsAddrRelayPeer() checked for the existence of the m_addr_known
2020-09-02scripted-diff: Rename `OUTBOUND` ConnectionType to `OUTBOUND_FULL_RELAY`Amiti Uttarwar
-BEGIN VERIFY SCRIPT- sed -i 's/OUTBOUND, /OUTBOUND_FULL_RELAY, /g' src/net.h sed -i 's/ConnectionType::OUTBOUND/ConnectionType::OUTBOUND_FULL_RELAY/g' src/test/net_tests.cpp src/test/fuzz/process_message.cpp src/test/fuzz/process_messages.cpp src/net.cpp src/test/denialofservice_tests.cpp src/net.h src/test/fuzz/net.cpp -END VERIFY SCRIPT-
2020-09-02Protect localhost and block-relay-only peers from evictionSuhas Daftuar
Onion peers are disadvantaged under our eviction criteria, so prevent eventual eviction of them in the presence of contention for inbound slots by reserving some slots for localhost peers (sorted by longest uptime). Block-relay-only connections exist as a protection against eclipse attacks, by creating a path for block propagation that may be unknown to adversaries. Protect against inbound peer connection slot attacks from disconnecting such peers by attempting to protect up to 8 peers that are not relaying transactions but appear to be full-nodes, sorted by recency of last delivered block. Thanks to gmaxwell for suggesting these strategies.
2020-09-02Address nits in ADDR cachingGleb Naumenko
2020-09-01net: improve nLastBlockTime and nLastTXTime documentationJon Atack
Co-authored-by: John Newbery <john@johnnewbery.com>
2020-08-27Add indexing ADDR cache by local socket addrGleb Naumenko
2020-08-27Justify the choice of ADDR cache lifetimeGleb Naumenko
2020-08-15net: add nLastBlockTime/TXTime to CNodeStats, CNode::copyStatsJon Atack
2020-08-12Merge #19658: [rpc] Allow RPC to fetch all addrman records and add records ↵Wladimir J. van der Laan
to addrman 37a480e0cd94895b6051abef12d984ff74bdc4a3 [net] Add addpeeraddress RPC method (John Newbery) ae8051bbd8377f2458ff1f167dc30c2d5f83e317 [test] Test that getnodeaddresses() can return all known addresses (John Newbery) f26502e9fc8a669b30717525597e3f468eaecf79 [addrman] Specify max addresses and pct when calling GetAddresses() (John Newbery) Pull request description: Currently addrman only allows a maximum of 1000 records or 23% of all records to be returned in a call to `GetAddr()`. Relax this limit and have the client specify the max records they want. For p2p, behaviour is unchanged (but the rate limiting is set inside net_processing, where it belongs). For RPC, `getnodeaddresses` can now return the complete addrman, which is helpful for testing and monitoring. Also add a test-only RPC `addpeeraddress`, which adds an IP address:port to addrman. This is helpful for testing (eg #18991). ACKs for top commit: naumenkogs: utACK 37a480e0cd94895b6051abef12d984ff74bdc4a3 laanwj: Code review and lightly manually tested ACK 37a480e0cd94895b6051abef12d984ff74bdc4a3 Tree-SHA512: f86dcd410aaebaf6e9ca18ce6f23556e5e4649c1325577213d873aa09967298e65ab2dc19a72670641ae92211a923afda1fe124a82e9d2c1cad73d478ef27fdc
2020-08-12[net] Add addpeeraddress RPC methodJohn Newbery
Allows addresses to be added to Address Manager for testing.
2020-08-12[addrman] Specify max addresses and pct when calling GetAddresses()John Newbery
CAddrMan.GetAddr() would previously limit the number and percentage of addresses returned (to ADDRMAN_GETADDR_MAX (1000) and ADDRMAN_GETADDR_MAX_PCT (23) respectively). Instead, make it the callers responsibility to specify the maximum addresses and percentage they want returned. For net_processing, the maximums are MAX_ADDR_TO_SEND (1000) and MAX_PCT_ADDR_TO_SEND (23). For rpc/net, the maximum is specified by the client.
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-02 22:47:15 +0000