| Age | Commit message (Collapse) | Author |
|---|
|
SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
|
|
|
|
Mempool requests use a fair amount of bandwidth when the mempool is large,
disconnecting peers using them follows the same logic as disconnecting
peers fetching historical blocks.
|
|
086ee67 Switch to a more efficient rolling Bloom filter (Pieter Wuille)
|
|
aa4b0c2 When not filtering blocks, getdata sends more in one test (Pieter Wuille)
d41e44c Actually only use filterInventoryKnown with MSG_TX inventory messages. (Gregory Maxwell)
b6a0da4 Only use filterInventoryKnown with MSG_TX inventory messages. (Patick Strateman)
6b84935 Rename setInventoryKnown filterInventoryKnown (Patick Strateman)
e206724 Remove mruset as it is no longer used. (Gregory Maxwell)
ec73ef3 Replace setInventoryKnown with a rolling bloom filter. (Gregory Maxwell)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Store sum of legacy and P2SH sig op counts. This is calculated in AcceptToMemory pool and storing it saves redoing the expensive calculation in block template creation.
|
|
aabc897 rpc: Don't translate warning messages (Wladimir J. van der Laan)
|
|
2d8860e Fix removeForReorg to use MedianTimePast (Suhas Daftuar)
b7fa4aa Don't call removeForReorg if DisconnectTip fails (Suhas Daftuar)
7e49f5f Track coinbase spends in CTxMemPoolEntry (Suhas Daftuar)
bb8ea1f removeForReorg calls once-per-disconnect-> once-per-reorg (Matt Corallo)
474b84a Make indentation in ActivateBestChainStep readable (Matt Corallo)
b0a064c Fix comment in removeForReorg (Matt Corallo)
9b060e5 Fix removal of time-locked transactions during reorg (Matt Corallo)
0c9959a Add failing test checking timelocked-txn removal during reorg (Matt Corallo)
|
|
But keep translating them in the GUI.
This - necessarily - requires duplication of a few messages.
Alternative take on #7134, that keeps the translations from being wiped.
Also document GetWarnings() input argument.
Fixes #5895.
|
|
ebb25f4 Limit setAskFor and retire requested entries only when a getdata returns. (Gregory Maxwell)
5029698 prevent peer flooding request queue for an inv (kazcw)
|
|
|
|
|
|
This allows us to optimize CTxMemPool::removeForReorg.
|
|
|
|
|
|
|
|
Previously this logic could erroneously filter a MSG_BLOCK inventory message.
|
|
|
|
Mruset setInventoryKnown was reduced to a remarkably small 1000
entries as a side effect of sendbuffer size reductions in 2012.
This removes setInventoryKnown filtering from merkleBlock responses
because false positives there are especially unattractive and
also because I'm not sure if there aren't race conditions around
the relay pool that would cause some transactions there to
be suppressed. (Also, ProcessGetData was accessing
setInventoryKnown without taking the required lock.)
|
|
cb491e7 Trivial: Fix warning introduced by #7053 by casting to uint64_t (Jorge Timón)
|
|
|
|
This replaces using inv messages to announce new blocks, when a peer requests
(via the new "sendheaders" message) that blocks be announced with headers
instead of inv's.
Since headers-first was introduced, peers send getheaders messages in response
to an inv, which requires generating a block locator that is large compared to
the size of the header being requested, and requires an extra round-trip before
a reorg can be relayed. Save time by tracking headers that a peer is likely to
know about, and send a headers chain that would connect to a peer's known
headers, unless the chain would be too big, in which case we revert to sending
an inv instead.
Based off of @sipa's commit to announce all blocks in a reorg via inv,
which has been squashed into this commit.
Rebased-by: Pieter Wuille
|
|
a9f3d3d Fix and improve relay from whitelisted peers (Pieter Wuille)
|
|
eece63f Switch blocks to a constant-space Merkle root/branch algorithm. (Pieter Wuille)
ee60e56 Add merkle.{h,cpp}, generic merkle root/branch algorithm (Pieter Wuille)
|
|
* DEFAULT_DISABLE_SAFEMODE = false
* Use DEFAULT_* constants for extern bools
|
|
For each 'bit' in the filter we really maintain 2 bits, which store either:
0: not set
1-3: set in generation N
After (nElements / 2) insertions, we switch to a new generation, and wipe
entries which already had the new generation number, effectively switching
from the last 1.5 * nElements set to the last 1.0 * nElements set.
This is 25% more space efficient than the previous implementation, and can
(at peak) store 1.5 times the requested amount of history (though only
1.0 times the requested history is guaranteed).
The existing unit tests should be sufficient.
|
|
|
|
This switches the Merkle tree logic for blocks to one that runs in constant (small) space.
The old code is moved to tests, and a new test is added that for various combinations of
block sizes, transaction positions to compute a branch for, and mutations:
* Verifies that the old code and new code agree for the Merkle root.
* Verifies that the old code and new code agree for the Merkle branch.
* Verifies that the computed Merkle branch is valid.
* Verifies that mutations don't change the Merkle root.
* Verifies that mutations are correctly detected.
|
|
2e29e7e Globals: Remove a bunch of Params() calls from main.cpp: (Jorge Timón)
|
|
63b5840 Fix usage of local python-bitcoinlib (Peter Todd)
16a2f93 Fix incorrect locking of mempool during RBF replacement (Peter Todd)
97203f5 Port test to rpc-test framework (Suhas Daftuar)
20367d8 Add test for max replacement limit (Suhas Daftuar)
73d9040 Improve RBF replacement criteria (Suhas Daftuar)
b272ecf Reject replacements that add new unconfirmed inputs (Peter Todd)
fc8c19a Prevent low feerate txs from (directly) replacing high feerate txs (Peter Todd)
0137e6f Add tests for transaction replacement (Peter Todd)
5891f87 Add opt-in full-RBF to mempool (Peter Todd)
|
|
This makes sure that retransmits by a whitelisted peer also actually
result in a retransmit.
Further, this changes the logic to never relay in case we would assign
a DoS score, as we expect to get DoS banned ourselves as a result.
|
|
Previously peers which implement a protocol version less than NO_BLOOM_VERSION
would not be disconnected for sending a filter command, regardless of the
peerbloomfilter option.
Many node operators do not wish to provide expensive bloom filtering for SPV
clients, previously they had to cherry pick the commit which enabled the
disconnect logic.
The default should remain false until a sufficient percent of SPV clients
have updated.
|
|
Moving this logic outside of the "switch" makes it far simpler to
enable the forced disconnect by a parameter.
|
|
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
|
|
The setAskFor duplicate elimination was too eager and removed entries
when we still had no getdata response, allowing the peer to keep
INVing and not responding.
|
|
mapAlreadyAskedFor does not keep track of which peer has a request queued for a
particular tx. As a result, a peer can blind a node to a tx indefinitely by
sending many invs for the same tx, and then never replying to getdatas for it.
Each inv received will be placed 2 minutes farther back in mapAlreadyAskedFor,
so a short message containing 10 invs would render that tx unavailable for 20
minutes.
This is fixed by disallowing a peer from having more than one entry for a
particular inv in mapAlreadyAskedFor at a time.
|
|
80ae230 Improve log messages for blocks only violations. (Patick Strateman)
08843ed Add relaytxes status to getpeerinfo (Peter Todd)
d8aaa51 Bail early in processing transactions in blocks only mode. (Patick Strateman)
3587f6a Fix relay mechanism for whitelisted peers under blocks only mode. (Patick Strateman)
|
|
|
|
6531f17 Add mediantime field to getblock and getblockheader (Peter Todd)
7259769 Document new mediantime field in getblockchaininfo (Peter Todd)
c277a63 Clarify nLockTime-by-time comment in CheckFinalTx() (Peter Todd)
748321e Add mediantime field to getblockchaininfo RPC call (Peter Todd)
|
|
Previously unsolicited transactions would be processed as normal.
|
|
Previously in blocks only mode all inv messages where type!=MSG_BLOCK would be
rejected without regard for whitelisting or whitelistalwaysrelay.
As such whitelisted peers would never send the transaction (which would be
processed).
|
|
Compute the value of inputs that already are in the chain at time of mempool entry and only increase priority due to aging for those inputs. This effectively changes the CTxMemPoolEntry's GetPriority calculation from an upper bound to a lower bound.
|
|
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
|
|
- This will keep getbestblockhash more in sync with blocknotify callbacks
|
