| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
and minor formatting fixups
|
|
|
|
|
|
Implement the following commands from the I2P SAM protocol:
* HELLO: needed for all of the remaining ones
* DEST GENERATE: to generate our private key and destination
* NAMING LOOKUP: to convert .i2p addresses to destinations
* SESSION CREATE: needed for STREAM CONNECT and STREAM ACCEPT
* STREAM CONNECT: to make outgoing connections
* STREAM ACCEPT: to accept incoming connections
|
|
location if -logsourcelocations is set
b4511e2e2ed1a6077ae6826a9ee6b7a311293d08 log: Prefix log messages with function name if -logsourcelocations is set (practicalswift)
Pull request description:
Prefix log messages with function name if `-logfunctionnames` is set.
Yes, exactly like `-logthreadnames` but for function names instead of thread names :)
This is a small developer ergonomics improvement: I've found this to be a cheap/simple way to correlate log output and originating function.
For me it beats the ordinary cycle of 1.) try to figure out a regexp matching the static part of the dynamic log message, 2.) `git grep -E 'Using .* MiB out of .* requested for signature cache'`, 3.) `mcedit filename.cpp` (`openemacs filename.cpp` works too!) and 4.) search for log message and scroll up to find the function name :)
Without any logging parameters:
```
$ src/bitcoind -regtest
2020-08-25T03:29:04Z Using RdRand as an additional entropy source
2020-08-25T03:29:04Z Using 16 MiB out of 32/2 requested for signature cache, able to store 524288 elements
2020-08-25T03:29:04Z Using 16 MiB out of 32/2 requested for script execution cache, able to store 524288 elements
2020-08-25T03:29:04Z Loaded best chain: hashBestChain=0fff88f13cb7b2c71f2a335e3a4fc328bf5beb436012afca590b1a11466e22ff height=0 date=2011-02-02T23:16:42Z progress=1.000000
2020-08-25T03:29:04Z block tree size = 1
2020-08-25T03:29:04Z nBestHeight = 0
2020-08-25T03:29:04Z Imported mempool transactions from disk: 0 succeeded, 0 failed, 0 expired, 0 already there, 0 waiting for initial broadcast
2020-08-25T03:29:04Z 0 addresses found from DNS seeds
```
With `-logthreadnames` and `-logfunctionnames`:
```
$ src/bitcoind -regtest -logthreadnames -logfunctionnames
2020-08-25T03:29:04Z [init] [ReportHardwareRand] Using RdRand as an additional entropy source
2020-08-25T03:29:04Z [init] [InitSignatureCache] Using 16 MiB out of 32/2 requested for signature cache, able to store 524288 elements
2020-08-25T03:29:04Z [init] [InitScriptExecutionCache] Using 16 MiB out of 32/2 requested for script execution cache, able to store 524288 elements
2020-08-25T03:29:04Z [init] [LoadChainTip] Loaded best chain: hashBestChain=0fff88f13cb7b2c71f2a335e3a4fc328bf5beb436012afca590b1a11466e22ff height=0 date=2011-02-02T23:16:42Z progress=1.000000
2020-08-25T03:29:04Z [init] [AppInitMain] block tree size = 1
2020-08-25T03:29:04Z [init] [AppInitMain] nBestHeight = 0
2020-08-25T03:29:04Z [loadblk] [LoadMempool] Imported mempool transactions from disk: 0 succeeded, 0 failed, 0 expired, 0 already there, 0 waiting for initial broadcast
2020-08-25T03:29:04Z [dnsseed] [ThreadDNSAddressSeed] 0 addresses found from DNS seeds
```
ACKs for top commit:
laanwj:
Code review ACK b4511e2e2ed1a6077ae6826a9ee6b7a311293d08
MarcoFalke:
review ACK b4511e2e2ed1a6077ae6826a9ee6b7a311293d08 🌃
Tree-SHA512: d100f5364630c323f31d275259864c597f7725e462d5f4bdedcc7033ea616d7fc0d16ef1b2af557e692f4deea73c6773ccfc681589e7bf6ba970b9ec169040c7
|
|
|
|
|
|
|
|
|
|
|
|
5478d6c099e76fe070703cc5383cba7b91468b0f logging: thread safety annotations (Anthony Towns)
e685ca19928eec4e687c66f5edfcfff085a42c27 util/system.cpp: add thread safety annotations for dir_locks (Anthony Towns)
a7887899480db72328784009181d93904e6d479d test/checkqueue_tests: thread safety annotations (Anthony Towns)
479c5846f7477625ec275fbb8a076c7ef157172b rpc/blockchain.cpp: thread safety annotations for latestblock (Anthony Towns)
8b5af3d4c1270267ad85e78f661bf8fab06f3aad net: fMsgProcWake use LOCK instead of lock_guard (Anthony Towns)
de7c5f41aba860751ef7824245e6d9d5088a1200 wallet/wallet.h: Remove mutexScanning which was only protecting a single atomic bool (Anthony Towns)
c3cf2f55013c4ea1c1ef4a878fc7ff8e92f2c42d rpc/blockchain.cpp: Remove g_utxosetscan mutex that is only protecting a single atomic variable (Anthony Towns)
Pull request description:
In a few cases we need to use `std::mutex` rather than the sync.h primitives. But `std::lock_guard<std::mutex>` doesn't include the clang thread safety annotations unless you also use clang's C library, which means you can't indicate when variables should be guarded by `std::mutex` mutexes.
This adds an annotated version of `std::lock_guard<std::mutex>` to threadsafety.h to fix that, and modifies places where `std::mutex` is used to take advantage of the annotations.
It's based on top of #16112, and turns the thread safety comments included there into annotations.
It also changes the RAII classes in wallet/wallet.h and rpc/blockchain.cpp to just use the atomic<bool> flag for synchronisation rather than having a mutex that doesn't actually guard anything as well.
ACKs for top commit:
MarcoFalke:
ACK 5478d6c099e76fe070703cc5383cba7b91468b0f 🗾
hebasto:
re-ACK 5478d6c099e76fe070703cc5383cba7b91468b0f, only renamed s/`MutexGuard`/`LockGuard`/, and dropped the commit "test/util_threadnames_tests: add thread safety annotations" since the [previous](https://github.com/bitcoin/bitcoin/pull/16127#pullrequestreview-414184113) review.
ryanofsky:
Code review ACK 5478d6c099e76fe070703cc5383cba7b91468b0f. Thanks for taking suggestions! Only changes since last review are dropping thread rename test commit d53072ec730d8eec5a5b72f7e65a54b141e62b19 and renaming mutex guard to lock guard
Tree-SHA512: 7b00d31f6f2b5a222ec69431eb810a74abf0542db3a65d1bbad54e354c40df2857ec89c00b4a5e466c81ba223267ca95f3f98d5fbc1a1d052a2c3a7d2209790a
|
|
Adds LockGuard helper in threadsafety.h to replace lock_guard<mutex>
when LOCK(Mutex) isn't available for use.
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f Add logging for CValidationInterface events (Jeffrey Czyz)
6edebacb2191373e76d79a4972d6192300976096 Refactor FormatStateMessage for clarity (Jeffrey Czyz)
72f3227c83810936e7a334304e5fd7c6dab8e91b Format CValidationState properly in all cases (Jeffrey Czyz)
428ac70095253225f64462ee15c595644747f376 Add VALIDATION to BCLog::LogFlags (Jeffrey Czyz)
Pull request description:
Add logging of `CValidationInterface` callbacks using a new `VALIDATIONINTERFACE` log flag (see #12994). A separate flag is desirable as the logging can be noisy and thus may need to be disabled without affecting other logging.
This could help debug issues where there may be race conditions at play, such as #12978.
ACKs for top commit:
jnewbery:
ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f
hebasto:
ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f
ariard:
ACK f9abf4a, only changes since 0cadb12 are replacing log indication `VALIDATIONINTERFACE` by `VALIDATION` and avoiding a forward declaration with a new include
ryanofsky:
Code review ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f. Just suggested changes since last review (thanks!)
Tree-SHA512: 3e0f6e2c8951cf46fbad3ff440971d95d526df2a52a2e4d6452a82785c63d53accfdabae66b0b30e2fe0b00737f8d5cb717edbad1460b63acb11a72c8f5d4236
|
|
This flag is for logging from within CValidationInterface (see #12994).
A separate flag is desirable as the logging can be noisy and thus may
need to be disabled without affecting other logging.
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
-BEGIN VERIFY SCRIPT-
git grep -l "BCLog::DB" src | xargs sed -i "s/BCLog::DB/BCLog::WALLETDB/g"
sed -i "s/DB =/WALLETDB =/g" src/logging.h
-END VERIFY SCRIPT-
|
|
Deprecate (but still accept) '-debug=db'.
|
|
|
|
Belts and suspenders: make sure outgoing log messages don't contain
potentially suspicious characters, such as terminal control codes.
This escapes control characters except newline ('\n') in C syntax.
It escapes instead of removes them to still allow for troubleshooting
issues where they accidentally end up in strings.
|
|
|
|
|
|
This ensures log messages prior to StartLogging() are replayed to
the console as well as to the debug log file.
|
|
StartLogging() is used to mark the start of logging generically, whether
using -printtoconsole or -debuglogfile.
|
|
Introduce a new flag (`-logthreadnames`) which allows toggling
of this behavior.
|
|
|
|
-BEGIN VERIFY SCRIPT-
mkdir -p src/util
git mv src/util.h src/util/system.h
git mv src/util.cpp src/util/system.cpp
git mv src/utilmemory.h src/util/memory.h
git mv src/utilmoneystr.h src/util/moneystr.h
git mv src/utilmoneystr.cpp src/util/moneystr.cpp
git mv src/utilstrencodings.h src/util/strencodings.h
git mv src/utilstrencodings.cpp src/util/strencodings.cpp
git mv src/utiltime.h src/util/time.h
git mv src/utiltime.cpp src/util/time.cpp
sed -i 's/<util\.h>/<util\/system\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmemory\.h>/<util\/memory\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilmoneystr\.h>/<util\/moneystr\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utilstrencodings\.h>/<util\/strencodings\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/<utiltime\.h>/<util\/time\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp')
sed -i 's/BITCOIN_UTIL_H/BITCOIN_UTIL_SYSTEM_H/g' src/util/system.h
sed -i 's/BITCOIN_UTILMEMORY_H/BITCOIN_UTIL_MEMORY_H/g' src/util/memory.h
sed -i 's/BITCOIN_UTILMONEYSTR_H/BITCOIN_UTIL_MONEYSTR_H/g' src/util/moneystr.h
sed -i 's/BITCOIN_UTILSTRENCODINGS_H/BITCOIN_UTIL_STRENCODINGS_H/g' src/util/strencodings.h
sed -i 's/BITCOIN_UTILTIME_H/BITCOIN_UTIL_TIME_H/g' src/util/time.h
sed -i 's/ util\.\(h\|cpp\)/ util\/system\.\1/g' src/Makefile.am
sed -i 's/utilmemory\.\(h\|cpp\)/util\/memory\.\1/g' src/Makefile.am
sed -i 's/utilmoneystr\.\(h\|cpp\)/util\/moneystr\.\1/g' src/Makefile.am
sed -i 's/utilstrencodings\.\(h\|cpp\)/util\/strencodings\.\1/g' src/Makefile.am
sed -i 's/utiltime\.\(h\|cpp\)/util\/time\.\1/g' src/Makefile.am
sed -i 's/-> util ->/-> util\/system ->/' test/lint/lint-circular-dependencies.sh
sed -i 's/src\/util\.cpp/src\/util\/system\.cpp/g' test/lint/lint-format-strings.py test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilmoneystr\.cpp/src\/util\/moneystr\.cpp/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\/utilstrencodings\.\(h\|cpp\)/src\/util\/strencodings\.\1/g' test/lint/lint-locale-dependence.sh
sed -i 's/src\\utilstrencodings\.cpp/src\\util\\strencodings\.cpp/' build_msvc/libbitcoinconsensus/libbitcoinconsensus.vcxproj
-END VERIFY SCRIPT-
|
|
SIGHUP)
|
|
|
|
20ce5af Print a log message if we fail to shrink the debug log file (practicalswift)
29c9bdc Handle unsuccessful fseek(...):s (practicalswift)
Pull request description:
Handle unsuccessful `fseek(...)`:s.
**Note to reviewers:** What is the most appropriate course of actions for each of these unsuccessful `fseek(...)`:s?
Tree-SHA512: 5b3d82dbdd15d434d3f08dcb4df62888da4df8541d2586f56a4e529083005f6782c39e10645acd1ec403da83061bbfd8dbf2dddc66e09268d410ad0918c61876
|
|
|
|
|
|
`LogPrintStr` returns the number of characters printed. This number is
doubled if both logging to console and logging to file is enabled. As
the return value is never used, I've opted to remove it instead of try
to fix it.
Credit: @laanwj
|
|
|
|
This breaks the cyclic between logging and util.
|
|
-BEGIN VERIFY SCRIPT-
sed -i "s/fileout/m_fileout/" src/logging.h src/logging.cpp
sed -i "s/mutexDebugLog/m_file_mutex/" src/logging.h src/logging.cpp
sed -i "s/vMsgsBeforeOpenLog/m_msgs_before_open/" src/logging.h src/logging.cpp
sed -i "s/logCategories/m_categories/" src/logging.h src/logging.cpp
sed -i "s/fPrintToConsole/m_print_to_console/" src/logging.h src/logging.cpp src/init.cpp
sed -i "s/fPrintToDebugLog/m_print_to_file/" src/logging.h src/logging.cpp src/init.cpp src/test/test_bitcoin.cpp src/bench/bench_bitcoin.cpp
sed -i "s/fLogTimestamps/m_log_timestamps/" src/logging.h src/logging.cpp src/init.cpp
sed -i "s/fLogTimeMicros/m_log_time_micros/" src/logging.h src/logging.cpp src/init.cpp
sed -i "s/fReopenDebugLog/m_reopen_file/" src/logging.h src/logging.cpp src/init.cpp
sed -i "s/fStartedNewLine/m_started_new_line/" src/logging.h src/logging.cpp
-END VERIFY SCRIPT-
|
|
Changing parameter types from pointers to references and uint32_t to
BCLog::LogFlags simplies calling code.
|
|
|
|
|
|
The object encapsulates logging configuration, and in a later commit,
set up routines will also be moved into the class.
|
|
|
