| Age | Commit message (Collapse) | Author |
|---|
|
This ensures consistency across interfaces and makes the version handling more clear.
|
|
c7ec524 [wallet] Add dummy wallet init class (John Newbery)
49baa4a [wallet] Use global g_wallet_init_interface to init/destroy the wallet. (John Newbery)
caaf972 [wallet] Create wallet init interface. (John Newbery)
5fb5421 [wallet] Move wallet init functions into WalletInit class. (John Newbery)
Pull request description:
This continues the work of #7965. This PR, along with several others, would remove the remaining dependencies from libbitcoin_server.a on libbitcoin_wallet.a.
To create the interface, I've just translated all the old init.cpp wallet function calls into an interface class. I've not done any thinking about whether it makes sense to change that interface by combining/splitting those calls. This is a purely internal interface, so there's no problem in changing it later.
Tree-SHA512: 32ea57615229c33fd1a7f2f29ebc11bf30337685f7211baffa899823ef74b65dcbf068289c557a161c5afffb51fdc38a2ee8180720371f64d433b12b0615cf3f
|
|
|
|
This commit creates a global g_wallet_init_interface, which is created
in bitcoind and bitcoin-qt. g_wallet_init_interface is used to init
and destroy the wallet.
This removes the dependency from init.cpp on the wallet library.
|
|
-BEGIN VERIFY SCRIPT-
sed -i 's/enum DBErrors/enum class DBErrors/g' src/wallet/walletdb.h
git grep -l DB_ | xargs sed -i 's/DB_\(LOAD_OK\|CORRUPT\|NONCRITICAL_ERROR\|TOO_NEW\|LOAD_FAIL\|NEED_REWRITE\)/DBErrors::\1/g'
sed -i 's/^ DBErrors::/ /g' src/wallet/walletdb.h
sed -i 's/enum VerifyResult/enum class VerifyResult/g' src/wallet/db.h
sed -i 's/\(VERIFY_OK\|RECOVER_OK\|RECOVER_FAIL\)/VerifyResult::\1/g' src/wallet/db.cpp
sed -i 's/enum ThresholdState/enum class ThresholdState/g' src/versionbits.h
git grep -l THRESHOLD_ | xargs sed -i 's/THRESHOLD_\(DEFINED\|STARTED\|LOCKED_IN\|ACTIVE\|FAILED\)/ThresholdState::\1/g'
sed -i 's/^ ThresholdState::/ /g' src/versionbits.h
sed -i 's/enum SigVersion/enum class SigVersion/g' src/script/interpreter.h
git grep -l SIGVERSION_ | xargs sed -i 's/SIGVERSION_\(BASE\|WITNESS_V0\)/SigVersion::\1/g'
sed -i 's/^ SigVersion::/ /g' src/script/interpreter.h
sed -i 's/enum RetFormat {/enum class RetFormat {/g' src/rest.cpp
sed -i 's/RF_\(UNDEF\|BINARY\|HEX\|JSON\)/RetFormat::\1/g' src/rest.cpp
sed -i 's/^ RetFormat::/ /g' src/rest.cpp
sed -i 's/enum HelpMessageMode {/enum class HelpMessageMode {/g' src/init.h
git grep -l HMM_ | xargs sed -i 's/HMM_BITCOIN/HelpMessageMode::BITCOIN/g'
sed -i 's/^ HelpMessageMode::/ /g' src/init.h
sed -i 's/enum FeeEstimateHorizon/enum class FeeEstimateHorizon/g' src/policy/fees.h
sed -i 's/enum RBFTransactionState/enum class RBFTransactionState/g' src/policy/rbf.h
git grep -l RBF_ | xargs sed -i 's/RBF_TRANSACTIONSTATE_\(UNKNOWN\|REPLACEABLE_BIP125\|FINAL\)/RBFTransactionState::\1/g'
sed -i 's/^ RBFTransactionState::/ /g' src/policy/rbf.h
sed -i 's/enum BlockSource {/enum class BlockSource {/g' src/qt/clientmodel.h
git grep -l BLOCK_SOURCE_ | xargs sed -i 's/BLOCK_SOURCE_\(NONE\|REINDEX\|DISK\|NETWORK\)/BlockSource::\1/g'
sed -i 's/^ BlockSource::/ /g' src/qt/clientmodel.h
sed -i 's/enum FlushStateMode {/enum class FlushStateMode {/g' src/validation.cpp
sed -i 's/FLUSH_STATE_\(NONE\|IF_NEEDED\|PERIODIC\|ALWAYS\)/FlushStateMode::\1/g' src/validation.cpp
sed -i 's/^ FlushStateMode::/ /g' src/validation.cpp
sed -i 's/enum WitnessMode {/enum class WitnessMode {/g' src/test/script_tests.cpp
sed -i 's/WITNESS_\(NONE\|PKH\|SH\)/WitnessMode::\1/g' src/test/script_tests.cpp
sed -i 's/^ WitnessMode::/ /g' src/test/script_tests.cpp
-END VERIFY SCRIPT-
|
|
This resolves #12229 which pointed out a shutdown deadlock due to
scheduler/checkqueue having been shut down while network message
processing is still running.
|
|
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
false
|
|
They were temporary additions to ease the transition.
-BEGIN VERIFY SCRIPT-
find src/ -name "*.cpp" ! -wholename "src/util.h" ! -wholename "src/util.cpp" | xargs perl -i -pe 's/(?<!\.)(ParseParameters|ReadConfigFile|IsArgSet|(Soft|Force)?(Get|Set)(|Bool|)Arg(s)?)\(/gArgs.\1(/g'
-END VERIFY SCRIPT-
|
|
pointer literal instead of the macro NULL
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
|
|
instead of the macro NULL
-BEGIN VERIFY SCRIPT-
sed -i 's/\<NULL\>/nullptr/g' src/*.cpp src/*.h src/*/*.cpp src/*/*.h src/qt/*/*.cpp src/qt/*/*.h src/wallet/*/*.cpp src/wallet/*/*.h src/support/allocators/*.h
sed -i 's/Prefer nullptr, otherwise SAFECOOKIE./Prefer NULL, otherwise SAFECOOKIE./g' src/torcontrol.cpp
sed -i 's/tor: Using nullptr authentication/tor: Using NULL authentication/g' src/torcontrol.cpp
sed -i 's/METHODS=nullptr/METHODS=NULL/g' src/test/torcontrol_tests.cpp src/torcontrol.cpp
sed -i 's/nullptr certificates/NULL certificates/g' src/qt/paymentserver.cpp
sed -i 's/"nullptr"/"NULL"/g' src/torcontrol.cpp src/test/torcontrol_tests.cpp
-END VERIFY SCRIPT-
|
|
This resolves a possible-assert-on-shutdown race introduced in
1f668b646806f94acd851acdbd9939c24e0492d3 when early shutdown
occurs.
Previously this was not done to avoid any cases where the
threadGroup might not exit due to a blocking thread, but at this
point the threadGroup isn't used all that much, plus Qt already
does this, and its good to keep their init/shutdown consistent.
For those curious, the threadGroup is only used in a few places:
* Its used to run the CCheckQueues in script validation, but these
use the boost mutex/condition variable primitives, so they
respect the interrupt pretty trivially.
* Its used for the import thread, which should exit rather quickly
as mostly it just calls LoadExternalBlockFile, which has an
interruption_point right before each block loaded.
* Its used in the scheduler thread, which is only used for:
* validationinterface has an effectively-dummy reference to it.
* wallet compaction, which should not last long
* addr/banlist dumping from CConnman, which should also be fast
|
|
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive
AppInitLockDataDirectory must not have Shutdown() called in case of
failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
|
|
|
|
The current message is not helpful. Hardly anyone even remembers that
bitcoind used to be a cli utility, let alone new users. Print what the
actual problem is.
|
|
Step two in abstracting away boost::filesystem.
To repeat this, simply run:
```
git ls-files \*.cpp \*.h | xargs sed -i 's/boost::filesystem/fs/g'
```
|
|
This is step one in abstracting the use of boost::filesystem.
|
|
To be consistent with other exit() calls.
|
|
Edited via:
$ contrib/devtools/copyright_header.py update .
|
|
|
|
|
|
|
|
lock errors
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
|
|
This allows doing some of the steps before e.g. daemonization and some
fater.
|
|
numbers
|
|
- `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error)
- error reading config file should exit with `1`
Slightly refactor AppInitRPC/AppInitRawTx to return standard exit codes (EXIT_FAILURE/EXIT_SUCCESS) or CONTINUE_EXECUTION (-1)
|
|
|
|
Simplified version of #8278. Assumes that every OS that (a) is supported
by Bitcoin Core (b) supports daemonization has the `daemon()` function
in its C library.
- Removes the fallback path for operating systems that support
daemonization but not `daemon()`. This prevents never-exercised code from
ending up in the repository (see discussion here:
https://github.com/bitcoin/bitcoin/pull/8278#issuecomment-242704745).
- Removes the windows-specific path. Windows doesn't support `daemon()`,
so it don't support daemonization there, automatically.
Original code by Matthew King, adapted by Wladimir van der Laan.
|
|
|
|
|
|
second line to copyrights in -version, About dialog, and splash screen
|
|
|
|
|
|
|
|
|
|
|
|
- ensure all missing catch cases are constant where possible
|
|
3cb56f3 *: alias -h for --help (Daniel Cousens)
|
|
|
|
55a8975 Chainparams: Translations: DRY: options and error strings (Jorge Timón)
f3525e2 Chainparams: Replace CBaseChainParams::Network enum with string constants (suggested by Wladimir) (Jorge Timón)
|
|
Also remove SelectBaseParamsFromCommandLine and SelectParamsFromCommandLine
|
|
- *Replace usage of boost::asio with [libevent2](http://libevent.org/)*.
boost::asio is not part of C++11, so unlike other boost there is no
forwards-compatibility reason to stick with it. Together with #4738 (convert
json_spirit to UniValue), this rids Bitcoin Core of the worst offenders with
regard to compile-time slowness.
- *Replace spit-and-duct-tape http server with evhttp*. Front-end http handling
is handled by libevent, a work queue (with configurable depth and parallelism)
is used to handle application requests.
- *Wrap HTTP request in C++ class*; this makes the application code mostly
HTTP-server-neutral
- *Refactor RPC to move all http-specific code to a separate file*.
Theoreticaly this can allow building without HTTP server but with another RPC
backend, e.g. Qt's debug console (currently not implemented) or future RPC
mechanisms people may want to use.
- *HTTP dispatch mechanism*; services (e.g., RPC, REST) register which URL
paths they want to handle.
By using a proven, high-performance asynchronous networking library (also used
by Tor) and HTTP server, problems such as #5674, #5655, #344 should be avoided.
What works? bitcoind, bitcoin-cli, bitcoin-qt. Unit tests and RPC/REST tests
pass. The aim for now is everything but SSL support.
Configuration options:
- `-rpcthreads`: repurposed as "number of work handler threads". Still
defaults to 4.
- `-rpcworkqueue`: maximum depth of work queue. When this is reached, new
requests will return a 500 Internal Error.
- `-rpctimeout`: inactivity time, in seconds, after which to disconnect a
client.
- `-debug=http`: low-level http activity logging
|
|
-Move from .h to .cpp: in main, net and wallet
-Remove unnecessary #include "main.h"
-Cleanup some wallet files includes
|
|
|
|
|
|
b74dcb3 Separate CTranslationInterface from CClientUIInterface (Jorge Timón)
|
|
|
|
|
|
The main thread spends time waiting for the DetectShutdownThread.
So why not just run this waiting loop function in the main thread?
One thread-stack less saves 4MB of virtual memory on 32-bit, and 8MB on
64-bit.
|
