aboutsummaryrefslogtreecommitdiff
path: root/src/Makefile.test.include
AgeCommit message (Collapse)Author
2015-12-01Merge pull request #6914Wladimir J. van der Laan
114b581 Prevector type (Pieter Wuille)
2015-11-27Switch blocks to a constant-space Merkle root/branch algorithm.Pieter Wuille
This switches the Merkle tree logic for blocks to one that runs in constant (small) space. The old code is moved to tests, and a new test is added that for various combinations of block sizes, transaction positions to compute a branch for, and mutations: * Verifies that the old code and new code agree for the Merkle root. * Verifies that the old code and new code agree for the Merkle branch. * Verifies that the computed Merkle branch is valid. * Verifies that mutations don't change the Merkle root. * Verifies that mutations are correctly detected.
2015-11-25Replace scriptnum_test's normative ScriptNum implementationWladimir J. van der Laan
Compare against the scriptnum from Bitcoin Core 0.10 instead of OpenSSL. Closes #7086.
2015-11-13Prevector typePieter Wuille
2015-11-09build: Split hardening/fPIE options outCory Fields
This allows for fPIE to be used selectively.
2015-10-22leveldbwrapper file rename to dbwrapper.*Jeff Garzik
2015-10-07Merge pull request #6720Wladimir J. van der Laan
1534d9a Creates unittests for addrman, makes addrman testable. Adds several unittests for addrman to verify it works as expected. Makes small modifications to addrman to allow deterministic and targeted tests. (EthanHeilman)
2015-10-06Merge pull request #6650Wladimir J. van der Laan
42cb388 Add chainstate obfuscation to avoid spurious antivirus detection (James O'Beirne)
2015-10-06Add chainstate obfuscation to avoid spurious antivirus detectionJames O'Beirne
Adds an `obfuscate` parameter to `CLevelDBWrapper` and makes use of it for all new chainstate stores built via `CCoinsViewDB`. Also adds an `Xor` method to `CDataStream`. Thanks to @sipa @laanwj @pstratem @dexX7 @KyrosKrane @gmaxwell.
2015-10-01[Univalue] add univalue over subtreeJonas Schnelli
similar to secp256k1 include and compile univalue over a subtree
2015-09-24Creates unittests for addrman, makes addrman testable.EthanHeilman
Adds several unittests for addrman to verify it works as expected. Makes small modifications to addrman to allow deterministic and targeted tests.
2015-09-16Add ZeroMQ support. Notify blocks and transactions via ZeroMQJeff Garzik
Continues Johnathan Corgan's work. Publishing multipart messages Bugfix: Add missing zmq header includes Bugfix: Adjust build system to link ZeroMQ code for Qt binaries
2015-09-03Replace boost::reverse_lock with our own.Casey Rodarmor
2015-08-17Add limitedmap testCasey Rodarmor
2015-08-06Add support for data-based outputs (OP_RETURN) to bitcoin-tx.Pavel Janík
2015-07-27Unit test doublespends in new blocksGavin Andresen
As suggested by Greg Maxwell-- unit test to make sure a block with a double-spend in it doesn't pass validation if half of the double-spend is already in the memory pool (so full-blown transaction validation is skipped) when the block is received.
2015-05-14Merge pull request #5964Gavin Andresen
9a1dcea Use CScheduler for net's DumpAddresses (Gavin Andresen) ddd0acd Create a scheduler thread for lightweight tasks (Gavin Andresen) 68d370b CScheduler unit test (Gavin Andresen) cfefe5b scheduler: fix with boost <= 1.50 (Cory Fields) ca66717 build: make libboost_chrono mandatory (Cory Fields) 928b950 CScheduler class for lightweight task scheduling (Gavin Andresen) e656560 [Qt] add defaultConfirmTarget constant to sendcoinsdialog (Philip Kaufmann)
2015-05-14CScheduler unit testGavin Andresen
2015-05-13Merge pull request #5159Wladimir J. van der Laan
b649e03 Create new BlockPolicyEstimator for fee estimates (Alex Morcos)
2015-05-13Create new BlockPolicyEstimator for fee estimatesAlex Morcos
This class groups transactions that have been confirmed in blocks into buckets, based on either their fee or their priority. Then for each bucket, the class calculates what percentage of the transactions were confirmed within various numbers of blocks. It does this by keeping an exponentially decaying moving history for each bucket and confirm block count of the percentage of transactions in that bucket that were confirmed within that number of blocks. -Eliminate txs which didn't have all inputs available at entry from fee/pri calcs -Add dynamic breakpoints and tracking of confirmation delays in mempool transactions -Remove old CMinerPolicyEstimator and CBlockAverage code -New smartfees.py -Pass a flag to the estimation code, using IsInitialBlockDownload as a proxy for when we are still catching up and we shouldn't be counting how many blocks it takes for transactions to be included. -Add a policyestimator unit test
2015-04-23fix and enable bip32 unit testJonas Schnelli
the bip32 unit test was not included in the make process
2015-03-26Keep mempool consistent during block-reorgsGavin Andresen
This fixes a subtle bug involving block re-orgs and non-standard transactions. Start with a block containing a non-standard transaction, and one or more transactions spending it in the memory pool. Then re-org away from that block to another chain that does not contain the non-standard transaction. Result before this fix: the dependent transactions get stuck in the mempool without their parent, putting the mempool in an inconsistent state. Tested with a new unit test.
2015-03-12[Move Only] Move wallet related things to src/wallet/Jonas Schnelli
could once be renamed from /src/wallet to /src/legacywallet.
2015-03-09Merge pull request #5852Wladimir J. van der Laan
51598b2 Reinitialize state in between individual unit tests. (Pieter Wuille)
2015-03-03Reinitialize state in between individual unit tests.Pieter Wuille
This changes the TestingSetup fixture to be per-unit-test rather than global. Most tests don't need it, so it's only invoked in a few.
2015-02-21Add unit tests for next difficulty calculationsRoss Nicoll
Split GetNextWorkRequired() into two functions to allow the difficulty calculations to be tested without requiring a full blockchain. Add unit tests to cover basic difficulty calculation, plus each of the min/max actual time, and maximum difficulty target conditions.
2015-01-31remove sig_canonical.json and sig_noncanonical.jsonManuel Araoz
2015-01-05tests: run sanity checks in tests tooCory Fields
If these are going to fail in bitcoind, they should fail in the tests as well.
2015-01-05Add tests for new uint256Wladimir J. van der Laan
2015-01-05uint256->arith_uint256 blob256->uint256Wladimir J. van der Laan
Introduce new opaque implementation of `uint256`, move old "arithmetic" implementation to `arith_uint256.
2014-12-31Merge #5528 fromJeff Garzik
branch 'bitcoin-tx-copy-paste' of git://github.com/ers35/bitcoin into merge-5528
2014-12-24bitcoin-tx: Add test case for signing a txEric R. Schulz
2014-12-19build: fix 'make distcheck'Cory Fields
Rather than treating the .py as a regular built test, run it from check-local so that we can better control the paths used.
2014-11-20build: fix link error on some platforms. Fixes #5235Cory Fields
Some users may have libtool libs (.la) installed in their linker search paths. In this case, using -static-libtool-libs would try to link in .a's instead of shared libs. That would be harmless unless the .a was built in a way that would break linking, like non-fpic. What we really want is "-static" here. Despite its name, it's actually less aggressive than -static-libtool-libs. It causes only internal libs to be linked statically (libbitcoinconsensus is the one were'a after).
2014-11-19build: add --with-libs so that libs are optionalCory Fields
2014-11-19build: add libbitcoinconsensus files and hook up the lib buildCory Fields
Credit BlueMatt for libbitcoinsonsensus.h/cpp
2014-11-19build: make a distinction between static app ldflags and static lib ldflagsCory Fields
For windows builds, exe's are always static, but libs should still conform to --enabled-shared and --enable-static.
2014-11-18build: secp256k1 as a subdir, since it's requiredCory Fields
2014-11-18Always build and link libsecp256k1Pieter Wuille
2014-10-31minor cleanup: include orders, end comments etc.Philip Kaufmann
- no code changes
2014-10-13build: quit abusing LIBS for Windows builds.Cory Fields
Similar to the INCLUDES changes in 6b099402b40, split out LIBS into individual entries for more fine-grained control. Also add MINIUPNPC_LIBS which was missing before, and hook it up to executables.
2014-10-08Make SCRIPT_VERIFY_STRICTENC compatible with BIP62Pieter Wuille
* Delete canonical_tests.cpp, and move the tests to script_tests.cpp. * Split off SCRIPT_VERIFY_DERSIG from SCRIPT_VERIFY_STRICTENC (the BIP62 part of it). * Change signature STRICTENC/DERSIG semantics to fail the script entirely rather than the CHECKSIG result (softfork safety, and BIP62 requirement). * Add many autogenerated tests for several odd cases. * Mention specific BIP62 rules in the script verification flags.
2014-09-23Add coins_tests with a large randomized CCoinViewCache test.Pieter Wuille
2014-09-14bitcoin-util-test: Test bitcoin-tx with null scriptPubKeyLuke Dashjr
2014-08-26Move CMedianFilter to timedata.cppWladimir J. van der Laan
Now that we no longer use the median filter to keep track of the number of blocks of peers, that's the only place it is used.
2014-08-22Merge pull request #4733Jeff Garzik
2014-08-20UniValue: add unit testsJeff Garzik
2014-08-19Add bitcoin-tx testsJeff Garzik
Testing: delin, delout, locktime, and basic createrawtransaction-like functionality.
2014-08-19Add "it works" test for bitcoin-txJeff Garzik
2014-08-18build: add option for reducing exports (v2)Cory Fields
This was committed previously as 4975ae172 and reverted, because the flags were applied even if the checks didn't pass. This is the same commit, fixed up to actually disable the functionality when necessary. Enabled automatically if boost >= 1.49. See: https://svn.boost.org/trac/boost/ticket/2309 Also, check for a default visibility attribute, so that we can mark future api functions correctly.