aboutsummaryrefslogtreecommitdiff
path: root/qa
AgeCommit message (Collapse)Author
2014-06-24Merge pull request #3674Wladimir J. van der Laan
77cbd46 Let -zapwallettxes recover transaction meta data (Cozz Lovan)
2014-06-23qa/rpc_tests: Wait for handshake to complete in connect_nodesWladimir J. van der Laan
This avoids a race condition in which the connection was made but the version handshake is not completed yet. In that case transactions won't be broadcasted to a peer yet, and the nodes will wait forever for their mempools to sync.
2014-06-23Merge pull request #3960Wladimir J. van der Laan
3f9a019 added list/get received by address/ account tests (Alon Muroch)
2014-06-16Let -zapwallettxes recover transaction meta dataCozz Lovan
2014-06-06estimatefee / estimatepriority RPC methodsGavin Andresen
New RPC methods: return an estimate of the fee (or priority) a transaction needs to be likely to confirm in a given number of blocks. Mike Hearn created the first version of this method for estimating fees. It works as follows: For transactions that took 1 to N (I picked N=25) blocks to confirm, keep N buckets with at most 100 entries in each recording the fees-per-kilobyte paid by those transactions. (separate buckets are kept for transactions that confirmed because they are high-priority) The buckets are filled as blocks are found, and are saved/restored in a new fee_estiamtes.dat file in the data directory. A few variations on Mike's initial scheme: To estimate the fee needed for a transaction to confirm in X buckets, all of the samples in all of the buckets are used and a median of all of the data is used to make the estimate. For example, imagine 25 buckets each containing the full 100 entries. Those 2,500 samples are sorted, and the estimate of the fee needed to confirm in the very next block is the 50'th-highest-fee-entry in that sorted list; the estimate of the fee needed to confirm in the next two blocks is the 150'th-highest-fee-entry, etc. That algorithm has the nice property that estimates of how much fee you need to pay to get confirmed in block N will always be greater than or equal to the estimate for block N+1. It would clearly be wrong to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay 12 uBTC and it will take LONGER". A single block will not contribute more than 10 entries to any one bucket, so a single miner and a large block cannot overwhelm the estimates.
2014-06-06Allow multiple regression tests to run at onceGavin Andresen
Choose ports at startup based on PID, so multiple regression tests can run on the same system at the same time.
2014-05-13Add Python test for -rpcbind and -rpcallowipWladimir J. van der Laan
Add a new test, `rpcbind_test.py`, that extensively tests the new `-rpcbind` functionality.
2014-05-02Merge pull request #4074Wladimir J. van der Laan
d3081fa Removed LevelDB changes (super3)
2014-05-02stop bitcoind/bitcoin-cli processes that might have been left runningGavin Andresen
2014-05-01Removed LevelDB changessuper3
Syntax Highlighting
2014-04-02Have pull-tester run the listtransactions.py regression testGavin Andresen
This should show how to run a python-based regression test successfully in the pull-tester environment.
2014-04-02added list/get received by address/ account testsAlon Muroch
fixed some annotations and cleaned a bit received by tests d
2014-03-24Fix regression testsGavin Andresen
Taught bitcoind to close the HTTP connection after it gets a 'stop' command, to make it easier for the regression tests to cleanly stop. Move bitcoinrpc files to correct location. Tidied up the python-based regression tests.
2014-03-18Add licenses for tests and test dataWladimir J. van der Laan
- Add license headers to source files (years based on commit dates) in `src/test` as well as `qa` - Add `README.md` to `src/test/data` specifying MIT license Fixes #3848
2014-02-28Python-based regression testsGavin Andresen
skeleton.py : a do-nothing test skeleton listtransactions.py : start of regression test for listtransactions call
2014-02-26Remove CWalletTx::vfSpentGavin Andresen
Use the spent outpoint multimap to figure out which wallet transaction outputs are unspent, instead of a vfSpent array that is saved to disk.
2014-02-24Merge pull request #3704 from gavinandresen/wallet_lock_fixesGavin Andresen
Wallet locking fixes for -DDEBUG_LOCKORDER
2014-02-24Test for walletbackup/walletdump RPC callsGavin Andresen
2014-02-18Wallet locking fixes for -DDEBUG_LOCKORDERGavin Andresen
Compiling with -DDEBUG_LOCKORDER and running the qa/rpc-test/ regression tests uncovered a couple of wallet methods that should (but didn't) acquire the cs_wallet mutext. I also changed the AssertLockHeld() routine print to stderr and abort, instead of printing to debug.log and then assert()'ing. It is annoying to look in debug.log to find out which AssertLockHeld is failing.
2014-02-14Track and report wallet transaction clonesGavin Andresen
Adds a "walletconflicts" array to transaction info; if a wallet transaction is mutated, the alternate transaction id or ids are reported there (usually the array will be empty). Metadata from the original transaction is copied to the mutant, so the transaction time and "from" account of the mutant are reported correctly.
2014-02-14Handle "conflicted" transactions properlyGavin Andresen
Extend CMerkleTx::GetDepthInMainChain with the concept of a "conflicted" transaction-- a transaction generated by the wallet that is not in the main chain or in the mempool, and, therefore, will likely never be confirmed. GetDepthInMainChain() now returns -1 for conflicted transactions (0 for unconfirmed-but-in-the-mempool, and >1 for confirmed). This makes getbalance, getbalance '*', and listunspent all agree when there are mutated transactions in the wallet. Before: listunspent: one 49BTC output getbalance: 96 BTC (change counted twice) getbalance '*': 46 BTC (spends counted twice) After: all agree, 49 BTC available to spend.
2014-02-13Make qa/rpc-tests/ compatible with OSXGavin Andresen
Reworked send.sh, so it works properly on my Mac (killall send.sh doesn't work, because the process name is 'bash' not 'send.sh'). So now send.sh writes a .send.pid file, and invoking it as send.sh -STOP (as the bitcoind -walletnotify) signals that PID.
2014-01-10qt5: fix --with-qt with no argumentsCory Fields
2013-12-20qt: make wallet test consistentWladimir J. van der Laan
Add a function `WaitBlocks` to wait for blocks to propagate to all three nodes, and use this instead of waiting a fixed time of one second. Fixes #3445.
2013-11-27Integration tests via RPC callsGavin Andresen
qa/rpc-tests/wallet.sh runs a three-node -regtest network, generates a fresh blockchain, and then exercises basic wallet sending/receiving functionality using command-line RPC.
2013-11-10Update build docs that refer to old makefile.* files.Brandon Dahler
Also update pull-tester's error message.
2013-11-04Skip comparison tool on win32 since Wine breaks itMatt Corallo
2013-10-28Missed an RPC portMatt Corallo
2013-10-28Fix port binding by listening on port $BASHPIDMatt Corallo
2013-10-28Run block tester and test suite on Windows too (only on Jenkins)Matt Corallo
2013-10-28Gracefully handle the case when a DISTDIR already existsMatt Corallo
2013-10-28pull-tester.py: Re-enable coverage msg, new args to run test scriptMatt Corallo
2013-10-28Make large-reorg tests optional in block-testerMatt Corallo
2013-10-27Re-enable BitcoindComparisonTool:Matt Corallo
* Use the latest version, with limited memory usage, and path to on-disk db (try mouting qa/tmp on a tmpfs)\ * enable -debug=net * re-enable BitcoindComparisonTool in pull-tester
2013-10-11Disable code-coverage builds for nowGavin Andresen
Not working on the pull-tester machine, 'make cov' hangs there.
2013-10-11Rework pull-tester scripts, disable blockchain testerGavin Andresen
Re-organize the pull-tester scripts a bit. And disables running the blockchain tester, it is not working properly on the pull-tester machine for reasons I cannot explain (fails to start).
2013-10-08Re-enable win32 pull-testingGavin Andresen
2013-09-20Tweaks to the top-level pull-tester scriptGavin Andresen
2013-09-20Rename BitcoinjBitcoindComparisonTool just BitcoindComparisonToolGavin Andresen
2013-09-20Master pull-tester-driver python scriptGavin Andresen
2013-09-05autotools: switch to autotools buildsystemCory Fields