Age | Commit message (Collapse) | Author |
|
- If the -maxsigcachesize parameter is set to zero, setup a minimum sized
sigcache (2 elements) rather than segfaulting.
- Handle maxsigcachesize being negative
- Handle maxsigcachesize being too large
|
|
4b6cccc Selectively suppress deprecation warnings (Jonas Schnelli)
|
|
top of #9682)
a80f98b Use importmulti timestamp when importing watch only keys (Russell Yanofsky)
a58370e Dedup nTimeFirstKey update logic (Russell Yanofsky)
|
|
a47da4b Use z = std::max(x - y, 0); instead of z = x - y; if (z < 0) z = 0; (practicalswift)
|
|
0b4f273 Bugfix: Qt/Options: Restore persistent "restart required" notice (Luke Dashjr)
|
|
verack
d943491 qa: add a test to detect leaky p2p messages (Cory Fields)
8650bbb qa: Expose on-connection to mininode listeners (Matt Corallo)
5b5e4f8 qa: mininode learns when a socket connects, not its first action (Matt Corallo)
cbfc5a6 net: require a verack before responding to anything else (Cory Fields)
8502e7a net: parse reject earlier (Cory Fields)
c45b9fb net: correctly ban before the handshake is complete (Cory Fields)
|
|
66f861a Add a test for P2P inactivity timeouts (Matt Corallo)
b436f92 qa: Expose on-connection to mininode listeners (Matt Corallo)
8aaba7a qa: mininode learns when a socket connects, not its first action (Matt Corallo)
2cbd119 Disconnect peers which we do not receive VERACKs from within 60 sec (Matt Corallo)
|
|
266a811 Use MTP for importmulti "now" timestamps (Russell Yanofsky)
3cf9917 Add test to check new importmulti "now" value (Russell Yanofsky)
442887f Require timestamps for importmulti keys (Russell Yanofsky)
|
|
|
|
update-translations.py
7179e7c qt: Periodic translations update (Wladimir J. van der Laan)
5e903a5 devtools: Handle Qt formatting characters edge-case in update-translations.py (Wladimir J. van der Laan)
|
|
This is certainly not exhaustive, but it's better than nothing. Adds checks
for:
- Any message received before sending a version
- Any message received other than version/reject before sending a verack
It also tries to goad the remote into sending a pong, address, or block
announcement.
|
|
|
|
|
|
7a8c251901 made this logic hard to follow. After that change, messages would
not be sent to a peer via SendMessages() before the handshake was complete, but
messages could still be sent as a response to an incoming message.
For example, if a peer had not yet sent a verack, we wouldn't notify it about
new blocks, but we would respond to a PING with a PONG.
This change makes the behavior straightforward: until we've received a verack,
never send any message other than version/verack/reject.
The behavior until a VERACK is received has always been undefined, this change
just tightens our policy.
This also makes testing much easier, because we can now connect but not send
version/verack, and anything sent to us is an error.
|
|
Prior to this change, all messages were ignored until a VERSION message was
received, as well as possibly incurring a ban score.
Since REJECT messages can be sent at any time (including as a response to a bad
VERSION message), make sure to always parse them.
Moving this parsing up keeps it from being caught in the
if (pfrom->nVersion == 0) check below.
|
|
7a8c251901 made a change to avoid getting into SendMessages() until the
version handshake (VERSION + VERACK) is complete. That was done to avoid
leaking out messages to nodes who could connect, but never bothered sending
us their version/verack.
Unfortunately, the ban tally and possible disconnect are done as part of
SendMessages(). So after 7a8c251901, if a peer managed to do something
bannable before completing the handshake (say send 100 non-version messages
before their version), they wouldn't actually end up getting
disconnected/banned. That's fixed here by checking the banscore as part of
ProcessMessages() in addition to SendMessages().
|
|
|
|
a60677e Pre-0.14.0 hardcoded seeds update (Wladimir J. van der Laan)
bfa9393 contrib/seeds: Update PATTERN_AGENT (Wladimir J. van der Laan)
4dfac2c Update seeds tooling to Python 3 (Wladimir J. van der Laan)
|
|
was opened
db2dc7a Move CNode::addrLocal access behind locked accessors (Matt Corallo)
036073b Move CNode::addrName accesses behind locked accessors (Matt Corallo)
d8f2b8a Make nTimeBestReceived atomic (Matt Corallo)
22b4966 Move [clean|str]SubVer writes/copyStats into a lock (Matt Corallo)
0f31872 Make nServices atomic (Matt Corallo)
96f42d8 Make nStartingHeight atomic (Matt Corallo)
512731b Access fRelayTxes with cs_filter lock in copyStats (Matt Corallo)
ae683c1 Avoid copying CNodeStats to make helgrind OK with buggy std::string (Matt Corallo)
644f123 Make nTimeConnected const in CNode (Matt Corallo)
321d0fc net: fix a few races. Credit @TheBlueMatt (Cory Fields)
|
|
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes #9034.
|
|
Also make nTimeFirstKey member variable private.
This is just a cleanup change, it doesn't change behavior in any significant
way.
|
|
|
|
Easiest way to test this was to expose the timestamp via the validateaddress
RPC (which was already looking up and returning key metadata).
|
|
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes #9491
|
|
9db8eec Fix RPC failure testing (John Newbery)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These are (afaik) all long-standing races or concurrent accesses. Going
forward, we can clean these up so that they're not all individual atomic
accesses.
- Reintroduce cs_vRecv to guard receive-specific vars
- Lock vRecv/vSend for CNodeStats
- Make some vars atomic.
- Only set the connection time in CNode's constructor so that it doesn't change
|
|
9a0b784 net: add a lock around hSocket (Cory Fields)
45e2e08 net: rearrange so that socket accesses can be grouped together (Cory Fields)
|
|
|
|
gmaxwell: Adds the newest versions, drops everything multiple softforks ago.
|
|
All the other tooling scripts require Python 3, it makes sense to do so
here too.
Also document the dependency on python3-dnspython.
|
|
|
|
If both numeric format specifiers and "others" are used, assume we're
dealing with a Qt-formatted message. In the case of Qt formatting (see
https://doc.qt.io/qt-5/qstring.html#arg) only numeric formats are
replaced at all. This means "(percentage: %1%)" is valid (which was
introduced in #9461), without needing any kind of escaping that would be
necessary for strprintf. Without this, this function would wrongly
detect '%)' as a printf format specifier.
|
|
ca9955e Remove bitseed.xf2.org form the dns seed list (Jonas Schnelli)
|
|
|
|
|
|
a9baa6d Bugfix: Qt/Intro: Pruned nodes never require *more* space (Luke Dashjr)
93ffba7 Bugfix: Qt/Intro: Chain state needs to be stored even with the full blockchain (Luke Dashjr)
c8cee26 Qt/Intro: Update block chain size (Luke Dashjr)
|
|
|
|
|
|
|
|
|
|
|