diff options
Diffstat (limited to 'test')
83 files changed, 380 insertions, 528 deletions
diff --git a/test/functional/README.md b/test/functional/README.md index 44efda33d3..2558bd017d 100644 --- a/test/functional/README.md +++ b/test/functional/README.md @@ -24,8 +24,8 @@ don't have test cases for. - Use a module-level docstring to describe what the test is testing, and how it is testing it. - When subclassing the BitcoinTestFramwork, place overrides for the - `__init__()`, and `setup_xxxx()` methods at the top of the subclass, then - locally-defined helper methods, then the `run_test()` method. + `set_test_params()`, `add_options()` and `setup_xxxx()` methods at the top of + the subclass, then locally-defined helper methods, then the `run_test()` method. #### General test-writing advice @@ -36,7 +36,7 @@ don't have test cases for. - Avoid stop-starting the nodes multiple times during the test if possible. A stop-start takes several seconds, so doing it several times blows up the runtime of the test. -- Set the `self.setup_clean_chain` variable in `__init__()` to control whether +- Set the `self.setup_clean_chain` variable in `set_test_params()` to control whether or not to use the cached data directories. The cached data directories contain a 200-block pre-mined blockchain and wallets for four nodes. Each node has 25 mature blocks (25x50=1250 BTC) in its wallet. diff --git a/test/functional/abandonconflict.py b/test/functional/abandonconflict.py index c87c02492d..e8dbc86469 100755 --- a/test/functional/abandonconflict.py +++ b/test/functional/abandonconflict.py @@ -14,10 +14,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class AbandonConflictTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False self.extra_args = [["-minrelaytxfee=0.00001"], []] def run_test(self): @@ -74,7 +72,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Restart the node with a higher min relay fee so the parent tx is no longer in mempool # TODO: redo with eviction self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.0001"]) + self.start_node(0, extra_args=["-minrelaytxfee=0.0001"]) # Verify txs no longer in either node's mempool assert_equal(len(self.nodes[0].getrawmempool()), 0) @@ -101,7 +99,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Verify that even with a low min relay fee, the tx is not reaccepted from wallet on startup once abandoned self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.00001"]) + self.start_node(0, extra_args=["-minrelaytxfee=0.00001"]) assert_equal(len(self.nodes[0].getrawmempool()), 0) assert_equal(self.nodes[0].getbalance(), balance) @@ -121,7 +119,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Remove using high relay fee again self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.0001"]) + self.start_node(0, extra_args=["-minrelaytxfee=0.0001"]) assert_equal(len(self.nodes[0].getrawmempool()), 0) newbalance = self.nodes[0].getbalance() assert_equal(newbalance, balance - Decimal("24.9996")) diff --git a/test/functional/assumevalid.py b/test/functional/assumevalid.py index 9d17faac51..beaf8c7055 100755 --- a/test/functional/assumevalid.py +++ b/test/functional/assumevalid.py @@ -54,16 +54,16 @@ class BaseNode(NodeConnCB): self.send_message(headers_message) class AssumeValidTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 def setup_network(self): + self.add_nodes(3) # Start node0. We don't start the other nodes yet since # we need to pre-mine a block with an invalid transaction # signature so we can pass in the block hash as assumevalid. - self.nodes = [self.start_node(0, self.options.tmpdir)] + self.start_node(0) def send_blocks_until_disconnected(self, node): """Keep sending blocks to the node until we're disconnected.""" @@ -162,15 +162,13 @@ class AssumeValidTest(BitcoinTestFramework): height += 1 # Start node1 and node2 with assumevalid so they accept a block with a bad signature. - self.nodes.append(self.start_node(1, self.options.tmpdir, - ["-assumevalid=" + hex(block102.sha256)])) + self.start_node(1, extra_args=["-assumevalid=" + hex(block102.sha256)]) node1 = BaseNode() # connects to node1 connections.append(NodeConn('127.0.0.1', p2p_port(1), self.nodes[1], node1)) node1.add_connection(connections[1]) node1.wait_for_verack() - self.nodes.append(self.start_node(2, self.options.tmpdir, - ["-assumevalid=" + hex(block102.sha256)])) + self.start_node(2, extra_args=["-assumevalid=" + hex(block102.sha256)]) node2 = BaseNode() # connects to node2 connections.append(NodeConn('127.0.0.1', p2p_port(2), self.nodes[2], node2)) node2.add_connection(connections[2]) diff --git a/test/functional/bip65-cltv-p2p.py b/test/functional/bip65-cltv-p2p.py index 65ae8de554..2cd6df6e37 100755 --- a/test/functional/bip65-cltv-p2p.py +++ b/test/functional/bip65-cltv-p2p.py @@ -60,9 +60,7 @@ def create_transaction(node, coinbase, to_address, amount): return tx class BIP65Test(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 self.extra_args = [['-promiscuousmempoolflags=1', '-whitelist=127.0.0.1']] self.setup_clean_chain = True diff --git a/test/functional/bip68-112-113-p2p.py b/test/functional/bip68-112-113-p2p.py index 5a322e8c0e..7e6a4f4408 100755 --- a/test/functional/bip68-112-113-p2p.py +++ b/test/functional/bip68-112-113-p2p.py @@ -92,9 +92,9 @@ def all_rlt_txs(txarray): return txs class BIP68_112_113Test(ComparisonTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 + self.setup_clean_chain = True self.extra_args = [['-whitelist=127.0.0.1', '-blockversion=4']] def run_test(self): diff --git a/test/functional/bip68-sequence.py b/test/functional/bip68-sequence.py index 6968b46f73..3818287209 100755 --- a/test/functional/bip68-sequence.py +++ b/test/functional/bip68-sequence.py @@ -17,10 +17,8 @@ SEQUENCE_LOCKTIME_MASK = 0x0000ffff NOT_FINAL_ERROR = "64: non-BIP68-final" class BIP68Test(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False self.extra_args = [[], ["-acceptnonstdtxn=0"]] def run_test(self): diff --git a/test/functional/bip9-softforks.py b/test/functional/bip9-softforks.py index f00232c9ff..904789301a 100755 --- a/test/functional/bip9-softforks.py +++ b/test/functional/bip9-softforks.py @@ -28,11 +28,10 @@ from test_framework.comptool import TestInstance, TestManager from test_framework.script import CScript, OP_1NEGATE, OP_CHECKSEQUENCEVERIFY, OP_DROP class BIP9SoftForksTest(ComparisonTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 self.extra_args = [['-whitelist=127.0.0.1']] + self.setup_clean_chain = True def run_test(self): self.test = TestManager(self, self.options.tmpdir) @@ -241,6 +240,7 @@ class BIP9SoftForksTest(ComparisonTestFramework): # Restart all self.test.clear_all_connections() self.stop_nodes() + self.nodes = [] shutil.rmtree(self.options.tmpdir + "/node0") self.setup_chain() self.setup_network() diff --git a/test/functional/bipdersig-p2p.py b/test/functional/bipdersig-p2p.py index 9775970893..c620d3e155 100755 --- a/test/functional/bipdersig-p2p.py +++ b/test/functional/bipdersig-p2p.py @@ -48,9 +48,7 @@ def create_transaction(node, coinbase, to_address, amount): return tx class BIP66Test(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 self.extra_args = [['-promiscuousmempoolflags=1', '-whitelist=127.0.0.1']] self.setup_clean_chain = True diff --git a/test/functional/blockchain.py b/test/functional/blockchain.py index 0812e1b0df..5d04de9940 100755 --- a/test/functional/blockchain.py +++ b/test/functional/blockchain.py @@ -30,12 +30,8 @@ from test_framework.util import ( assert_is_hash_string, ) - class BlockchainTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = False + def set_test_params(self): self.num_nodes = 1 self.extra_args = [['-stopatheight=207']] @@ -146,7 +142,7 @@ class BlockchainTest(BitcoinTestFramework): pass # The node already shut down before response self.log.debug('Node should stop at this height...') self.nodes[0].process.wait(timeout=BITCOIND_PROC_WAIT_TIMEOUT) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) assert_equal(self.nodes[0].getblockcount(), 207) diff --git a/test/functional/bumpfee.py b/test/functional/bumpfee.py index 553ef4cd00..dde87d5bd1 100755 --- a/test/functional/bumpfee.py +++ b/test/functional/bumpfee.py @@ -30,25 +30,21 @@ WALLET_PASSPHRASE_TIMEOUT = 3600 class BumpFeeTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 self.setup_clean_chain = True + self.extra_args = [["-prematurewitness", "-walletprematurewitness", "-walletrbf={}".format(i)] + for i in range(self.num_nodes)] - def setup_network(self, split=False): - extra_args = [["-prematurewitness", "-walletprematurewitness", "-walletrbf={}".format(i)] - for i in range(self.num_nodes)] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) - + def run_test(self): # Encrypt wallet for test_locked_wallet_fails test self.nodes[1].node_encrypt_wallet(WALLET_PASSPHRASE) - self.nodes[1] = self.start_node(1, self.options.tmpdir, extra_args[1]) + self.start_node(1) self.nodes[1].walletpassphrase(WALLET_PASSPHRASE, WALLET_PASSPHRASE_TIMEOUT) connect_nodes_bi(self.nodes, 0, 1) self.sync_all() - def run_test(self): peer_node, rbf_node = self.nodes rbf_node_address = rbf_node.getnewaddress() diff --git a/test/functional/create_cache.py b/test/functional/create_cache.py index 39c4c0f47e..7d4d1a529b 100755 --- a/test/functional/create_cache.py +++ b/test/functional/create_cache.py @@ -12,13 +12,10 @@ tests are being run in parallel. from test_framework.test_framework import BitcoinTestFramework class CreateCache(BitcoinTestFramework): + # Test network and test nodes are not required: - def __init__(self): - super().__init__() - - # Test network and test nodes are not required: + def set_test_params(self): self.num_nodes = 0 - self.nodes = [] def setup_network(self): pass diff --git a/test/functional/dbcrash.py b/test/functional/dbcrash.py index a7fcc411c3..71424f641b 100755 --- a/test/functional/dbcrash.py +++ b/test/functional/dbcrash.py @@ -43,8 +43,7 @@ except AttributeError: pass class ChainstateWriteCrashTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 4 self.setup_clean_chain = False @@ -65,7 +64,8 @@ class ChainstateWriteCrashTest(BitcoinTestFramework): def setup_network(self): # Need a bit of extra time for the nodes to start up for this test - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=90) + self.add_nodes(self.num_nodes, timewait=90) + self.start_nodes() # Leave them unconnected, we'll use submitblock directly in this test def restart_node(self, node_index, expected_tip): @@ -78,7 +78,7 @@ class ChainstateWriteCrashTest(BitcoinTestFramework): while time.time() - time_start < 120: try: # Any of these RPC calls could throw due to node crash - self.nodes[node_index] = self.start_node(node_index, self.options.tmpdir, self.extra_args[node_index], timewait=90) + self.start_node(node_index) self.nodes[node_index].waitforblock(expected_tip) utxo_hash = self.nodes[node_index].gettxoutsetinfo()['hash_serialized_2'] return utxo_hash diff --git a/test/functional/decodescript.py b/test/functional/decodescript.py index 21a9f1223f..6611da8831 100755 --- a/test/functional/decodescript.py +++ b/test/functional/decodescript.py @@ -10,9 +10,7 @@ from test_framework.mininode import * from io import BytesIO class DecodeScriptTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 diff --git a/test/functional/disablewallet.py b/test/functional/disablewallet.py index d344513414..c1d37963bc 100755 --- a/test/functional/disablewallet.py +++ b/test/functional/disablewallet.py @@ -11,11 +11,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * - class DisableWalletTest (BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 self.extra_args = [["-disablewallet"]] diff --git a/test/functional/disconnect_ban.py b/test/functional/disconnect_ban.py index 19723226d3..a6445b9b35 100755 --- a/test/functional/disconnect_ban.py +++ b/test/functional/disconnect_ban.py @@ -14,11 +14,8 @@ from test_framework.util import ( ) class DisconnectBanTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False def run_test(self): self.log.info("Test setban and listbanned RPCs") @@ -68,8 +65,8 @@ class DisconnectBanTest(BitcoinTestFramework): assert_equal(len(self.nodes[1].listbanned()), 3) self.stop_node(1) + self.start_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir) listAfterShutdown = self.nodes[1].listbanned() assert_equal("127.0.0.0/24", listAfterShutdown[0]['address']) assert_equal("127.0.0.0/32", listAfterShutdown[1]['address']) diff --git a/test/functional/example_test.py b/test/functional/example_test.py index 4f9e0a7dd2..43f3415c8c 100755 --- a/test/functional/example_test.py +++ b/test/functional/example_test.py @@ -73,15 +73,13 @@ def custom_function(): class ExampleTest(BitcoinTestFramework): # Each functional test is a subclass of the BitcoinTestFramework class. - # Override the __init__(), add_options(), setup_chain(), setup_network() + # Override the set_test_params(), add_options(), setup_chain(), setup_network() # and setup_nodes() methods to customize the test setup as required. - def __init__(self): - """Initialize the test + def set_test_params(self): + """Override test parameters for your individual test. - Call super().__init__() first, and then override any test parameters - for your individual test.""" - super().__init__() + This method must be overridden and num_nodes must be exlicitly set.""" self.setup_clean_chain = True self.num_nodes = 3 # Use self.extra_args to change command-line arguments for the nodes diff --git a/test/functional/forknotify.py b/test/functional/forknotify.py index 3bcf0a6795..afcad1f9cc 100755 --- a/test/functional/forknotify.py +++ b/test/functional/forknotify.py @@ -7,28 +7,18 @@ import os import time from test_framework.test_framework import BitcoinTestFramework -from test_framework.util import * class ForkNotifyTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False def setup_network(self): - self.nodes = [] self.alert_filename = os.path.join(self.options.tmpdir, "alert.txt") with open(self.alert_filename, 'w', encoding='utf8'): pass # Just open then close to create zero-length file - self.nodes.append(self.start_node(0, self.options.tmpdir, - ["-blockversion=2", "-alertnotify=echo %s >> \"" + self.alert_filename + "\""])) - # Node1 mines block.version=211 blocks - self.nodes.append(self.start_node(1, self.options.tmpdir, - ["-blockversion=211"])) - connect_nodes(self.nodes[1], 0) - - self.sync_all() + self.extra_args = [["-blockversion=2", "-alertnotify=echo %s >> \"" + self.alert_filename + "\""], + ["-blockversion=211"]] + super().setup_network() def run_test(self): # Mine 51 up-version blocks diff --git a/test/functional/fundrawtransaction.py b/test/functional/fundrawtransaction.py index 9074223cb0..75a0dc5f9d 100755 --- a/test/functional/fundrawtransaction.py +++ b/test/functional/fundrawtransaction.py @@ -14,13 +14,10 @@ def get_unspent(listunspent, amount): return utx raise AssertionError('Could not find unspent with amount={}'.format(amount)) - class RawTransactionsTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = True + def set_test_params(self): self.num_nodes = 4 + self.setup_clean_chain = True def setup_network(self, split=False): self.setup_nodes() @@ -448,11 +445,11 @@ class RawTransactionsTest(BitcoinTestFramework): ############################################################ # locked wallet test self.stop_node(0) + self.nodes[1].node_encrypt_wallet("test") self.stop_node(2) self.stop_node(3) - self.nodes[1].node_encrypt_wallet("test") - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir) + self.start_nodes() # This test is not meant to test fee estimation and we'd like # to be sure all txs are sent at a consistent desired feerate for node in self.nodes: diff --git a/test/functional/getblocktemplate_longpoll.py b/test/functional/getblocktemplate_longpoll.py index cca30e2688..89768bd2fb 100755 --- a/test/functional/getblocktemplate_longpoll.py +++ b/test/functional/getblocktemplate_longpoll.py @@ -23,10 +23,8 @@ class LongpollThread(threading.Thread): self.node.getblocktemplate({'longpollid':self.longpollid}) class GetBlockTemplateLPTest(BitcoinTestFramework): - def __init__(self): - super().__init__() - self.num_nodes = 4 - self.setup_clean_chain = False + def set_test_params(self): + self.num_nodes = 2 def run_test(self): self.log.info("Warning: this test will take about 70 seconds in the best case. Be patient.") diff --git a/test/functional/getchaintips.py b/test/functional/getchaintips.py index 15f96c565f..21b67bfc64 100755 --- a/test/functional/getchaintips.py +++ b/test/functional/getchaintips.py @@ -14,13 +14,10 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import assert_equal class GetChainTipsTest (BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 4 - self.setup_clean_chain = False def run_test (self): - tips = self.nodes[0].getchaintips () assert_equal (len (tips), 1) assert_equal (tips[0]['branchlen'], 0) diff --git a/test/functional/httpbasics.py b/test/functional/httpbasics.py index 4b32e8d9ca..c7682cb49d 100755 --- a/test/functional/httpbasics.py +++ b/test/functional/httpbasics.py @@ -11,10 +11,8 @@ import http.client import urllib.parse class HTTPBasicsTest (BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 3 - self.setup_clean_chain = False def setup_network(self): self.setup_nodes() diff --git a/test/functional/import-rescan.py b/test/functional/import-rescan.py index 13e1bdecd3..cb5b65c682 100755 --- a/test/functional/import-rescan.py +++ b/test/functional/import-rescan.py @@ -111,8 +111,7 @@ TIMESTAMP_WINDOW = 2 * 60 * 60 class ImportRescanTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 + len(IMPORT_NODES) def setup_network(self): @@ -121,7 +120,8 @@ class ImportRescanTest(BitcoinTestFramework): if import_node.prune: extra_args[i] += ["-prune=1"] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.add_nodes(self.num_nodes, extra_args) + self.start_nodes() for i in range(1, self.num_nodes): connect_nodes(self.nodes[i], 0) diff --git a/test/functional/importmulti.py b/test/functional/importmulti.py index 18a3df028f..32f555c79b 100755 --- a/test/functional/importmulti.py +++ b/test/functional/importmulti.py @@ -7,8 +7,7 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class ImportMultiTest (BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 self.setup_clean_chain = True @@ -416,7 +415,7 @@ class ImportMultiTest (BitcoinTestFramework): # restart nodes to check for proper serialization/deserialization of watch only address self.stop_nodes() - self.nodes = self.start_nodes(2, self.options.tmpdir) + self.start_nodes() address_assert = self.nodes[1].validateaddress(watchonly_address) assert_equal(address_assert['iswatchonly'], True) assert_equal(address_assert['ismine'], False) diff --git a/test/functional/importprunedfunds.py b/test/functional/importprunedfunds.py index 4e88fc592e..cb70010668 100755 --- a/test/functional/importprunedfunds.py +++ b/test/functional/importprunedfunds.py @@ -6,11 +6,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * - class ImportPrunedFundsTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 diff --git a/test/functional/invalidateblock.py b/test/functional/invalidateblock.py index c499d57b90..dd3daf1e07 100755 --- a/test/functional/invalidateblock.py +++ b/test/functional/invalidateblock.py @@ -8,9 +8,7 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class InvalidateTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 diff --git a/test/functional/invalidblockrequest.py b/test/functional/invalidblockrequest.py index eabc0db8df..9f44b44927 100755 --- a/test/functional/invalidblockrequest.py +++ b/test/functional/invalidblockrequest.py @@ -23,9 +23,9 @@ class InvalidBlockRequestTest(ComparisonTestFramework): ''' Can either run this test as 1 node with expected answers, or two and compare them. Change the "outcome" variable from each TestInstance object to only do the comparison. ''' - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 + self.setup_clean_chain = True def run_test(self): test = TestManager(self, self.options.tmpdir) diff --git a/test/functional/invalidtxrequest.py b/test/functional/invalidtxrequest.py index a9ac231f09..a22bd8f8cd 100755 --- a/test/functional/invalidtxrequest.py +++ b/test/functional/invalidtxrequest.py @@ -19,9 +19,9 @@ class InvalidTxRequestTest(ComparisonTestFramework): ''' Can either run this test as 1 node with expected answers, or two and compare them. Change the "outcome" variable from each TestInstance object to only do the comparison. ''' - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 + self.setup_clean_chain = True def run_test(self): test = TestManager(self, self.options.tmpdir) diff --git a/test/functional/keypool-topup.py b/test/functional/keypool-topup.py index da29f697e3..b87433a9c5 100755 --- a/test/functional/keypool-topup.py +++ b/test/functional/keypool-topup.py @@ -20,8 +20,7 @@ from test_framework.util import ( ) class KeypoolRestoreTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 self.extra_args = [['-usehd=0'], ['-usehd=1', '-keypool=100', '-keypoolmin=20']] @@ -35,7 +34,7 @@ class KeypoolRestoreTest(BitcoinTestFramework): self.stop_node(1) shutil.copyfile(self.tmpdir + "/node1/regtest/wallet.dat", self.tmpdir + "/wallet.bak") - self.nodes[1] = self.start_node(1, self.tmpdir, self.extra_args[1]) + self.start_node(1, self.extra_args[1]) connect_nodes_bi(self.nodes, 0, 1) self.log.info("Generate keys for wallet") @@ -61,7 +60,7 @@ class KeypoolRestoreTest(BitcoinTestFramework): self.log.info("Verify keypool is restored and balance is correct") - self.nodes[1] = self.start_node(1, self.tmpdir, self.extra_args[1]) + self.start_node(1, self.extra_args[1]) connect_nodes_bi(self.nodes, 0, 1) self.sync_all() diff --git a/test/functional/keypool.py b/test/functional/keypool.py index 3e7bb0ee07..b823ca63bb 100755 --- a/test/functional/keypool.py +++ b/test/functional/keypool.py @@ -8,6 +8,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class KeyPoolTest(BitcoinTestFramework): + def set_test_params(self): + self.num_nodes = 1 def run_test(self): nodes = self.nodes @@ -19,7 +21,7 @@ class KeyPoolTest(BitcoinTestFramework): # Encrypt wallet and wait to terminate nodes[0].node_encrypt_wallet('test') # Restart node 0 - nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) # Keep creating keys addr = nodes[0].getnewaddress() addr_data = nodes[0].validateaddress(addr) @@ -78,10 +80,5 @@ class KeyPoolTest(BitcoinTestFramework): assert_equal(wi['keypoolsize_hd_internal'], 100) assert_equal(wi['keypoolsize'], 100) - def __init__(self): - super().__init__() - self.setup_clean_chain = False - self.num_nodes = 1 - if __name__ == '__main__': KeyPoolTest().main() diff --git a/test/functional/listsinceblock.py b/test/functional/listsinceblock.py index ce2d556ef0..6f428388ec 100755 --- a/test/functional/listsinceblock.py +++ b/test/functional/listsinceblock.py @@ -8,11 +8,9 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import assert_equal class ListSinceBlockTest (BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = True + def set_test_params(self): self.num_nodes = 4 + self.setup_clean_chain = True def run_test(self): self.nodes[2].generate(101) diff --git a/test/functional/listtransactions.py b/test/functional/listtransactions.py index f75a8e29cc..e4522cc3b5 100755 --- a/test/functional/listtransactions.py +++ b/test/functional/listtransactions.py @@ -16,15 +16,9 @@ def txFromHex(hexstring): return tx class ListTransactionsTest(BitcoinTestFramework): - def __init__(self): - super().__init__() - self.num_nodes = 4 - self.setup_clean_chain = False - - def setup_nodes(self): - #This test requires mocktime + def set_test_params(self): + self.num_nodes = 2 self.enable_mocktime() - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir) def run_test(self): # Simple send, 0 to 1: diff --git a/test/functional/maxuploadtarget.py b/test/functional/maxuploadtarget.py index 66e5bd29e6..1f402798e7 100755 --- a/test/functional/maxuploadtarget.py +++ b/test/functional/maxuploadtarget.py @@ -31,8 +31,7 @@ class TestNode(NodeConnCB): class MaxUploadTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 self.extra_args = [["-maxuploadtarget=800", "-blockmaxsize=999000"]] @@ -147,7 +146,7 @@ class MaxUploadTest(BitcoinTestFramework): #stop and start node 0 with 1MB maxuploadtarget, whitelist 127.0.0.1 self.log.info("Restarting nodes with -whitelist=127.0.0.1") self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-whitelist=127.0.0.1", "-maxuploadtarget=1", "-blockmaxsize=999000"]) + self.start_node(0, ["-whitelist=127.0.0.1", "-maxuploadtarget=1", "-blockmaxsize=999000"]) #recreate/reconnect a test node test_nodes = [TestNode()] diff --git a/test/functional/mempool_limit.py b/test/functional/mempool_limit.py index 2777291dd0..e24dc5a464 100755 --- a/test/functional/mempool_limit.py +++ b/test/functional/mempool_limit.py @@ -8,9 +8,7 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class MempoolLimitTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 self.extra_args = [["-maxmempool=5", "-spendzeroconfchange=0"]] diff --git a/test/functional/mempool_packages.py b/test/functional/mempool_packages.py index 423d03eacb..2b09889661 100755 --- a/test/functional/mempool_packages.py +++ b/test/functional/mempool_packages.py @@ -12,10 +12,8 @@ MAX_ANCESTORS = 25 MAX_DESCENDANTS = 25 class MempoolPackagesTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False self.extra_args = [["-maxorphantx=1000"], ["-maxorphantx=1000", "-limitancestorcount=5"]] # Build a transaction that spends parent_txid:vout diff --git a/test/functional/mempool_persist.py b/test/functional/mempool_persist.py index 807edeb7a8..01f65b1373 100755 --- a/test/functional/mempool_persist.py +++ b/test/functional/mempool_persist.py @@ -36,12 +36,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class MempoolPersistTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - # We need 3 nodes for this test. Node1 does not have a persistent mempool. + def set_test_params(self): self.num_nodes = 3 - self.setup_clean_chain = False self.extra_args = [[], ["-persistmempool=0"], []] def run_test(self): @@ -63,9 +59,8 @@ class MempoolPersistTest(BitcoinTestFramework): self.log.debug("Stop-start node0 and node1. Verify that node0 has the transactions in its mempool and node1 does not.") self.stop_nodes() - self.nodes = [] - self.nodes.append(self.start_node(0, self.options.tmpdir)) - self.nodes.append(self.start_node(1, self.options.tmpdir)) + self.start_node(0) + self.start_node(1) # Give bitcoind a second to reload the mempool time.sleep(1) wait_until(lambda: len(self.nodes[0].getrawmempool()) == 5) @@ -73,16 +68,14 @@ class MempoolPersistTest(BitcoinTestFramework): self.log.debug("Stop-start node0 with -persistmempool=0. Verify that it doesn't load its mempool.dat file.") self.stop_nodes() - self.nodes = [] - self.nodes.append(self.start_node(0, self.options.tmpdir, ["-persistmempool=0"])) + self.start_node(0, extra_args=["-persistmempool=0"]) # Give bitcoind a second to reload the mempool time.sleep(1) assert_equal(len(self.nodes[0].getrawmempool()), 0) self.log.debug("Stop-start node0. Verify that it has the transactions in its mempool.") self.stop_nodes() - self.nodes = [] - self.nodes.append(self.start_node(0, self.options.tmpdir)) + self.start_node(0) wait_until(lambda: len(self.nodes[0].getrawmempool()) == 5) if __name__ == '__main__': diff --git a/test/functional/mempool_reorg.py b/test/functional/mempool_reorg.py index 937bf4bab5..7dfddd3230 100755 --- a/test/functional/mempool_reorg.py +++ b/test/functional/mempool_reorg.py @@ -13,10 +13,8 @@ from test_framework.util import * # Create one-input, one-output, no-fee transaction: class MempoolCoinbaseTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False self.extra_args = [["-checkmempool"]] * 2 alert_filename = None # Set by setup_network diff --git a/test/functional/mempool_resurrect_test.py b/test/functional/mempool_resurrect_test.py index a2f6228df9..1263c9306b 100755 --- a/test/functional/mempool_resurrect_test.py +++ b/test/functional/mempool_resurrect_test.py @@ -9,12 +9,8 @@ from test_framework.util import * # Create one-input, one-output, no-fee transaction: class MempoolCoinbaseTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 - self.setup_clean_chain = False - # Just need one node for this test self.extra_args = [["-checkmempool"]] def run_test(self): diff --git a/test/functional/mempool_spendcoinbase.py b/test/functional/mempool_spendcoinbase.py index 277ea45ad5..58ccd3e373 100755 --- a/test/functional/mempool_spendcoinbase.py +++ b/test/functional/mempool_spendcoinbase.py @@ -17,11 +17,8 @@ from test_framework.util import * # Create one-input, one-output, no-fee transaction: class MempoolSpendCoinbaseTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 - self.setup_clean_chain = False self.extra_args = [["-checkmempool"]] def run_test(self): diff --git a/test/functional/merkle_blocks.py b/test/functional/merkle_blocks.py index bcc65c8408..a58334b2a5 100755 --- a/test/functional/merkle_blocks.py +++ b/test/functional/merkle_blocks.py @@ -8,11 +8,9 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class MerkleBlockTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = True + def set_test_params(self): self.num_nodes = 4 + self.setup_clean_chain = True # Nodes 0/1 are "wallet" nodes, Nodes 2/3 are used for testing self.extra_args = [[], [], [], ["-txindex"]] diff --git a/test/functional/mining.py b/test/functional/mining.py index f3d1f3e90a..93f9838896 100755 --- a/test/functional/mining.py +++ b/test/functional/mining.py @@ -27,9 +27,7 @@ def assert_template(node, block, expect, rehash=True): assert_equal(rsp, expect) class MiningTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 self.setup_clean_chain = False diff --git a/test/functional/multi_rpc.py b/test/functional/multi_rpc.py index a30e15ace9..a2b346f274 100755 --- a/test/functional/multi_rpc.py +++ b/test/functional/multi_rpc.py @@ -12,10 +12,7 @@ import http.client import urllib.parse class HTTPBasicsTest (BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = False + def set_test_params(self): self.num_nodes = 2 def setup_chain(self): diff --git a/test/functional/multiwallet.py b/test/functional/multiwallet.py index fc6e8e325f..e5453e9aad 100755 --- a/test/functional/multiwallet.py +++ b/test/functional/multiwallet.py @@ -12,9 +12,7 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import assert_equal, assert_raises_jsonrpc class MultiWalletTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 self.extra_args = [['-wallet=w1', '-wallet=w2', '-wallet=w3']] @@ -23,17 +21,17 @@ class MultiWalletTest(BitcoinTestFramework): self.stop_node(0) # should not initialize if there are duplicate wallets - self.assert_start_raises_init_error(0, self.options.tmpdir, ['-wallet=w1', '-wallet=w1'], 'Error loading wallet w1. Duplicate -wallet filename specified.') + self.assert_start_raises_init_error(0, ['-wallet=w1', '-wallet=w1'], 'Error loading wallet w1. Duplicate -wallet filename specified.') # should not initialize if wallet file is a directory os.mkdir(os.path.join(self.options.tmpdir, 'node0', 'regtest', 'w11')) - self.assert_start_raises_init_error(0, self.options.tmpdir, ['-wallet=w11'], 'Error loading wallet w11. -wallet filename must be a regular file.') + self.assert_start_raises_init_error(0, ['-wallet=w11'], 'Error loading wallet w11. -wallet filename must be a regular file.') # should not initialize if wallet file is a symlink os.symlink(os.path.join(self.options.tmpdir, 'node0', 'regtest', 'w1'), os.path.join(self.options.tmpdir, 'node0', 'regtest', 'w12')) - self.assert_start_raises_init_error(0, self.options.tmpdir, ['-wallet=w12'], 'Error loading wallet w12. -wallet filename must be a regular file.') + self.assert_start_raises_init_error(0, ['-wallet=w12'], 'Error loading wallet w12. -wallet filename must be a regular file.') - self.nodes[0] = self.start_node(0, self.options.tmpdir, self.extra_args[0]) + self.start_node(0, self.extra_args[0]) w1 = self.nodes[0].get_wallet_rpc("w1") w2 = self.nodes[0].get_wallet_rpc("w2") diff --git a/test/functional/net.py b/test/functional/net.py index 1e63d38035..830aeb45b4 100755 --- a/test/functional/net.py +++ b/test/functional/net.py @@ -17,10 +17,8 @@ from test_framework.util import ( p2p_port, ) - class NetTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 diff --git a/test/functional/nulldummy.py b/test/functional/nulldummy.py index 9717add272..60d0d876df 100755 --- a/test/functional/nulldummy.py +++ b/test/functional/nulldummy.py @@ -37,8 +37,7 @@ def trueDummy(tx): class NULLDUMMYTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 self.setup_clean_chain = True self.extra_args = [['-whitelist=127.0.0.1', '-walletprematurewitness']] diff --git a/test/functional/p2p-acceptblock.py b/test/functional/p2p-acceptblock.py index 322cb767db..293bc05539 100755 --- a/test/functional/p2p-acceptblock.py +++ b/test/functional/p2p-acceptblock.py @@ -60,8 +60,7 @@ class AcceptBlockTest(BitcoinTestFramework): default=os.getenv("BITCOIND", "bitcoind"), help="bitcoind binary to test") - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 self.extra_args = [[], ["-whitelist=127.0.0.1"]] diff --git a/test/functional/p2p-compactblocks.py b/test/functional/p2p-compactblocks.py index 91c0c406ff..94513d3f43 100755 --- a/test/functional/p2p-compactblocks.py +++ b/test/functional/p2p-compactblocks.py @@ -89,8 +89,7 @@ class TestNode(NodeConnCB): wait_until(lambda: not self.connected, timeout=timeout, lock=mininode_lock) class CompactBlocksTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True # Node0 = pre-segwit, node1 = segwit-aware self.num_nodes = 2 diff --git a/test/functional/p2p-feefilter.py b/test/functional/p2p-feefilter.py index dbccb633a5..8c92365ced 100755 --- a/test/functional/p2p-feefilter.py +++ b/test/functional/p2p-feefilter.py @@ -37,11 +37,8 @@ class TestNode(NodeConnCB): self.txinvs = [] class FeeFilterTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 - self.setup_clean_chain = False def run_test(self): node1 = self.nodes[1] diff --git a/test/functional/p2p-fullblocktest.py b/test/functional/p2p-fullblocktest.py index 92af0fefd0..1d969fc7c1 100755 --- a/test/functional/p2p-fullblocktest.py +++ b/test/functional/p2p-fullblocktest.py @@ -49,12 +49,11 @@ class CBrokenBlock(CBlock): return r class FullBlockTest(ComparisonTestFramework): - # Can either run this test as 1 node with expected answers, or two and compare them. # Change the "outcome" variable from each TestInstance object to only do the comparison. - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 + self.setup_clean_chain = True self.block_heights = {} self.coinbase_key = CECKey() self.coinbase_key.set_secretbytes(b"horsebattery") diff --git a/test/functional/p2p-leaktests.py b/test/functional/p2p-leaktests.py index f0d4d9a8b8..f27086c97e 100755 --- a/test/functional/p2p-leaktests.py +++ b/test/functional/p2p-leaktests.py @@ -92,8 +92,7 @@ class CNodeNoVerackIdle(CLazyNode): conn.send_message(msg_getaddr()) class P2PLeakTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 self.extra_args = [['-banscore='+str(banscore)]] diff --git a/test/functional/p2p-mempool.py b/test/functional/p2p-mempool.py index 34ef249eea..40fcde2605 100755 --- a/test/functional/p2p-mempool.py +++ b/test/functional/p2p-mempool.py @@ -13,9 +13,7 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class P2PMempoolTests(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 self.extra_args = [["-peerbloomfilters=0"]] diff --git a/test/functional/p2p-segwit.py b/test/functional/p2p-segwit.py index de69cba393..943bc2c6d2 100755 --- a/test/functional/p2p-segwit.py +++ b/test/functional/p2p-segwit.py @@ -32,8 +32,8 @@ def get_virtual_size(witness_block): return vsize class TestNode(NodeConnCB): - def __init__(self): - super().__init__() + def set_test_params(self): + self.num_nodes = 3 self.getdataset = set() def on_getdata(self, conn, message): @@ -108,9 +108,7 @@ def sign_P2PK_witness_input(script, txTo, inIdx, hashtype, value, key): class SegWitTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 self.extra_args = [["-whitelist=127.0.0.1"], ["-whitelist=127.0.0.1", "-acceptnonstdtxn=0"], ["-whitelist=127.0.0.1", "-vbparams=segwit:0:0"]] @@ -1495,7 +1493,7 @@ class SegWitTest(BitcoinTestFramework): # Restart with the new binary self.stop_node(node_id) - self.nodes[node_id] = self.start_node(node_id, self.options.tmpdir) + self.start_node(node_id, extra_args=[]) connect_nodes(self.nodes[0], node_id) sync_blocks(self.nodes) diff --git a/test/functional/p2p-timeouts.py b/test/functional/p2p-timeouts.py index c3b29c215b..51d4769efc 100755 --- a/test/functional/p2p-timeouts.py +++ b/test/functional/p2p-timeouts.py @@ -33,8 +33,7 @@ class TestNode(NodeConnCB): pass class TimeoutsTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 diff --git a/test/functional/p2p-versionbits-warning.py b/test/functional/p2p-versionbits-warning.py index df7e8ce5c1..5dfac6dd10 100755 --- a/test/functional/p2p-versionbits-warning.py +++ b/test/functional/p2p-versionbits-warning.py @@ -28,8 +28,7 @@ class TestNode(NodeConnCB): pass class VersionBitsWarningTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 @@ -112,7 +111,7 @@ class VersionBitsWarningTest(BitcoinTestFramework): # Empty out the alert file with open(self.alert_filename, 'w', encoding='utf8') as _: pass - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) + self.start_nodes() # Connecting one block should be enough to generate an error. self.nodes[0].generate(1) @@ -123,7 +122,7 @@ class VersionBitsWarningTest(BitcoinTestFramework): self.test_versionbits_in_alert_file() # Test framework expects the node to still be running... - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) + self.start_nodes() if __name__ == '__main__': VersionBitsWarningTest().main() diff --git a/test/functional/preciousblock.py b/test/functional/preciousblock.py index a69b8fb20c..1466f901c0 100755 --- a/test/functional/preciousblock.py +++ b/test/functional/preciousblock.py @@ -35,8 +35,7 @@ def node_sync_via_rpc(nodes): unidirectional_node_sync_via_rpc(node_src, node_dest) class PreciousTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 diff --git a/test/functional/prioritise_transaction.py b/test/functional/prioritise_transaction.py index 4fc03d2547..7ad368acd4 100755 --- a/test/functional/prioritise_transaction.py +++ b/test/functional/prioritise_transaction.py @@ -9,9 +9,7 @@ from test_framework.util import * from test_framework.mininode import COIN, MAX_BLOCK_BASE_SIZE class PrioritiseTransactionTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 self.extra_args = [["-printpriority=1"], ["-printpriority=1"]] diff --git a/test/functional/proxy_test.py b/test/functional/proxy_test.py index ae6f843ddc..81b99d1bf4 100755 --- a/test/functional/proxy_test.py +++ b/test/functional/proxy_test.py @@ -41,12 +41,9 @@ from test_framework.netutil import test_ipv6_local RANGE_BEGIN = PORT_MIN + 2 * PORT_RANGE # Start after p2p and rpc ports - class ProxyTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 4 - self.setup_clean_chain = False def setup_nodes(self): self.have_ipv6 = test_ipv6_local() @@ -89,7 +86,8 @@ class ProxyTest(BitcoinTestFramework): ] if self.have_ipv6: args[3] = ['-listen', '-proxy=[%s]:%i' % (self.conf3.addr),'-proxyrandomize=0', '-noonion'] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args=args) + self.add_nodes(self.num_nodes, extra_args=args) + self.start_nodes() def node_test(self, node, proxies, auth, test_onion=True): rv = [] diff --git a/test/functional/pruning.py b/test/functional/pruning.py index 3e00a34ac4..f53fe82881 100755 --- a/test/functional/pruning.py +++ b/test/functional/pruning.py @@ -26,9 +26,7 @@ def calc_usage(blockdir): return sum(os.path.getsize(blockdir+f) for f in os.listdir(blockdir) if os.path.isfile(blockdir+f)) / (1024. * 1024.) class PruneTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 6 @@ -56,6 +54,10 @@ class PruneTest(BitcoinTestFramework): connect_nodes(self.nodes[0], 4) sync_blocks(self.nodes[0:5]) + def setup_nodes(self): + self.add_nodes(self.num_nodes, self.extra_args, timewait=900) + self.start_nodes() + def create_big_chain(self): # Start by creating some coinbases we can spend later self.nodes[1].generate(200) @@ -98,7 +100,7 @@ class PruneTest(BitcoinTestFramework): # Node 2 stays connected, so it hears about the stale blocks and then reorg's when node0 reconnects # Stopping node 0 also clears its mempool, so it doesn't have node1's transactions to accidentally mine self.stop_node(0) - self.nodes[0]=self.start_node(0, self.options.tmpdir, self.full_node_default_args, timewait=900) + self.start_node(0, extra_args=self.full_node_default_args) # Mine 24 blocks in node 1 for i in range(24): if j == 0: @@ -126,7 +128,7 @@ class PruneTest(BitcoinTestFramework): # Reboot node 1 to clear its mempool (hopefully make the invalidate faster) # Lower the block max size so we don't keep mining all our big mempool transactions (from disconnected blocks) self.stop_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir, ["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"], timewait=900) + self.start_node(1, extra_args=["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"]) height = self.nodes[1].getblockcount() self.log.info("Current block height: %d" % height) @@ -149,7 +151,7 @@ class PruneTest(BitcoinTestFramework): # Reboot node1 to clear those giant tx's from mempool self.stop_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir, ["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"], timewait=900) + self.start_node(1, extra_args=["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"]) self.log.info("Generating new longer chain of 300 more blocks") self.nodes[1].generate(300) @@ -227,13 +229,15 @@ class PruneTest(BitcoinTestFramework): def manual_test(self, node_number, use_timestamp): # at this point, node has 995 blocks and has not yet run in prune mode - node = self.nodes[node_number] = self.start_node(node_number, self.options.tmpdir, timewait=900) + self.start_node(node_number) + node = self.nodes[node_number] assert_equal(node.getblockcount(), 995) assert_raises_jsonrpc(-1, "not in prune mode", node.pruneblockchain, 500) - self.stop_node(node_number) # now re-start in manual pruning mode - node = self.nodes[node_number] = self.start_node(node_number, self.options.tmpdir, ["-prune=1"], timewait=900) + self.stop_node(node_number) + self.start_node(node_number, extra_args=["-prune=1"]) + node = self.nodes[node_number] assert_equal(node.getblockcount(), 995) def height(index): @@ -307,7 +311,7 @@ class PruneTest(BitcoinTestFramework): # stop node, start back up with auto-prune at 550MB, make sure still runs self.stop_node(node_number) - self.nodes[node_number] = self.start_node(node_number, self.options.tmpdir, ["-prune=550"], timewait=900) + self.start_node(node_number, extra_args=["-prune=550"]) self.log.info("Success") @@ -315,7 +319,7 @@ class PruneTest(BitcoinTestFramework): # check that the pruning node's wallet is still in good shape self.log.info("Stop and start pruning node to trigger wallet rescan") self.stop_node(2) - self.nodes[2] = self.start_node(2, self.options.tmpdir, ["-prune=550"]) + self.start_node(2, extra_args=["-prune=550"]) self.log.info("Success") # check that wallet loads successfully when restarting a pruned node after IBD. @@ -325,7 +329,7 @@ class PruneTest(BitcoinTestFramework): nds = [self.nodes[0], self.nodes[5]] sync_blocks(nds, wait=5, timeout=300) self.stop_node(5) #stop and start to trigger rescan - self.nodes[5] = self.start_node(5, self.options.tmpdir, ["-prune=550"]) + self.start_node(5, extra_args=["-prune=550"]) self.log.info("Success") def run_test(self): diff --git a/test/functional/rawtransactions.py b/test/functional/rawtransactions.py index 847553097f..d7255daa0a 100755 --- a/test/functional/rawtransactions.py +++ b/test/functional/rawtransactions.py @@ -17,9 +17,7 @@ from test_framework.util import * # Create one-input, one-output, no-fee transaction: class RawTransactionsTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 diff --git a/test/functional/receivedby.py b/test/functional/receivedby.py index 19d99c9c9e..db6fc86b82 100755 --- a/test/functional/receivedby.py +++ b/test/functional/receivedby.py @@ -23,16 +23,9 @@ def get_sub_array_from_array(object_array, to_match): return [] class ReceivedByTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.num_nodes = 4 - self.setup_clean_chain = False - - def setup_nodes(self): - #This test requires mocktime + def set_test_params(self): + self.num_nodes = 2 self.enable_mocktime() - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir) def run_test(self): ''' diff --git a/test/functional/reindex.py b/test/functional/reindex.py index b446baa04d..1f684a1afe 100755 --- a/test/functional/reindex.py +++ b/test/functional/reindex.py @@ -15,8 +15,7 @@ import time class ReindexTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 @@ -25,7 +24,7 @@ class ReindexTest(BitcoinTestFramework): blockcount = self.nodes[0].getblockcount() self.stop_nodes() extra_args = [["-reindex-chainstate" if justchainstate else "-reindex", "-checkblockindex=1"]] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.start_nodes(extra_args) while self.nodes[0].getblockcount() < blockcount: time.sleep(0.1) assert_equal(self.nodes[0].getblockcount(), blockcount) diff --git a/test/functional/replace-by-fee.py b/test/functional/replace-by-fee.py index 4f33bb58b9..1d6494fe41 100755 --- a/test/functional/replace-by-fee.py +++ b/test/functional/replace-by-fee.py @@ -61,10 +61,8 @@ def make_utxo(node, amount, confirmed=True, scriptPubKey=CScript([1])): class ReplaceByFeeTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 1 - self.setup_clean_chain = False self.extra_args= [["-maxorphantx=1000", "-whitelist=127.0.0.1", "-limitancestorcount=50", diff --git a/test/functional/resendwallettransactions.py b/test/functional/resendwallettransactions.py index 5059aa106e..d6ba591391 100755 --- a/test/functional/resendwallettransactions.py +++ b/test/functional/resendwallettransactions.py @@ -8,11 +8,9 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import assert_equal, assert_raises_jsonrpc class ResendWalletTransactionsTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.extra_args = [['--walletbroadcast=false']] + def set_test_params(self): self.num_nodes = 1 + self.extra_args = [['--walletbroadcast=false']] def run_test(self): # Should raise RPC_WALLET_ERROR (-4) if walletbroadcast is disabled. @@ -20,7 +18,7 @@ class ResendWalletTransactionsTest(BitcoinTestFramework): # Should return an empty array if there aren't unconfirmed wallet transactions. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0, extra_args=[]) assert_equal(self.nodes[0].resendwallettransactions(), []) # Should return an array with the unconfirmed wallet transaction. diff --git a/test/functional/rest.py b/test/functional/rest.py index a69dbb5013..437111a4d7 100755 --- a/test/functional/rest.py +++ b/test/functional/rest.py @@ -43,8 +43,7 @@ def http_post_call(host, port, path, requestdata = '', response_object = 0): class RESTTest (BitcoinTestFramework): FORMAT_SEPARATOR = "." - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 diff --git a/test/functional/rpcbind_test.py b/test/functional/rpcbind_test.py index 20808207b2..0cf64beebd 100755 --- a/test/functional/rpcbind_test.py +++ b/test/functional/rpcbind_test.py @@ -11,19 +11,13 @@ from test_framework.test_framework import BitcoinTestFramework, SkipTest from test_framework.util import * from test_framework.netutil import * - class RPCBindTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 def setup_network(self): - pass - - def setup_nodes(self): - pass + self.add_nodes(self.num_nodes, None) def run_bind_test(self, allow_ips, connect_to, addresses, expected): ''' @@ -31,12 +25,14 @@ class RPCBindTest(BitcoinTestFramework): then try to connect, and check if the set of bound addresses matches the expected set. ''' + self.log.info("Bind test for %s" % str(addresses)) expected = [(addr_to_hex(addr), port) for (addr, port) in expected] base_args = ['-disablewallet', '-nolisten'] if allow_ips: base_args += ['-rpcallowip=' + x for x in allow_ips] binds = ['-rpcbind='+addr for addr in addresses] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, [base_args + binds], connect_to) + self.nodes[0].rpchost = connect_to + self.start_node(0, base_args + binds) pid = self.nodes[0].process.pid assert_equal(set(get_bind_addrs(pid)), set(expected)) self.stop_nodes() @@ -46,8 +42,10 @@ class RPCBindTest(BitcoinTestFramework): Start a node with rpcallow IP, and request getnetworkinfo at a non-localhost IP. ''' + self.log.info("Allow IP test for %s:%d" % (rpchost, rpcport)) base_args = ['-disablewallet', '-nolisten'] + ['-rpcallowip='+x for x in allow_ips] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, [base_args]) + self.nodes[0].rpchost = None + self.start_nodes([base_args]) # connect to node through non-loopback interface node = get_rpc_proxy(rpc_url(get_datadir_path(self.options.tmpdir, 0), 0, "%s:%d" % (rpchost, rpcport)), 0, coveragedir=self.options.coveragedir) node.getnetworkinfo() diff --git a/test/functional/rpcnamedargs.py b/test/functional/rpcnamedargs.py index 3b286000a1..da61cc66e6 100755 --- a/test/functional/rpcnamedargs.py +++ b/test/functional/rpcnamedargs.py @@ -10,15 +10,8 @@ from test_framework.util import ( assert_raises_jsonrpc, ) - class NamedArgumentTest(BitcoinTestFramework): - """ - Test named arguments on RPC calls. - """ - - def __init__(self): - super().__init__() - self.setup_clean_chain = False + def set_test_params(self): self.num_nodes = 1 def run_test(self): diff --git a/test/functional/segwit.py b/test/functional/segwit.py index 7bcb393012..609c592ed3 100755 --- a/test/functional/segwit.py +++ b/test/functional/segwit.py @@ -74,9 +74,7 @@ def find_unspent(node, min_value): return utxo class SegWitTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 3 self.extra_args = [["-walletprematurewitness", "-rpcserialversion=0"], diff --git a/test/functional/sendheaders.py b/test/functional/sendheaders.py index 6451b097c0..fe577dc20a 100755 --- a/test/functional/sendheaders.py +++ b/test/functional/sendheaders.py @@ -174,8 +174,7 @@ class TestNode(NodeConnCB): self.send_message(getblocks_message) class SendHeadersTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 diff --git a/test/functional/signmessages.py b/test/functional/signmessages.py index 42f6a9daaf..5fdfeceb76 100755 --- a/test/functional/signmessages.py +++ b/test/functional/signmessages.py @@ -7,9 +7,7 @@ from test_framework.test_framework import BitcoinTestFramework class SignMessagesTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 diff --git a/test/functional/signrawtransactions.py b/test/functional/signrawtransactions.py index 415727268a..b47ef93955 100755 --- a/test/functional/signrawtransactions.py +++ b/test/functional/signrawtransactions.py @@ -9,8 +9,7 @@ from test_framework.util import * class SignRawTransactionsTest(BitcoinTestFramework): - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 diff --git a/test/functional/smartfees.py b/test/functional/smartfees.py index bc42a319df..76632fc578 100755 --- a/test/functional/smartfees.py +++ b/test/functional/smartfees.py @@ -141,11 +141,8 @@ def check_estimates(node, fees_seen, max_invalid, print_estimates = True): class EstimateFeeTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 3 - self.setup_clean_chain = False def setup_network(self): """ @@ -153,57 +150,16 @@ class EstimateFeeTest(BitcoinTestFramework): But first we need to use one node to create a lot of outputs which we will use to generate our transactions. """ - self.nodes = [] + self.add_nodes(3, extra_args=[["-maxorphantx=1000", "-whitelist=127.0.0.1"], + ["-blockmaxsize=17000", "-maxorphantx=1000"], + ["-blockmaxsize=8000", "-maxorphantx=1000"]]) # Use node0 to mine blocks for input splitting - self.nodes.append(self.start_node(0, self.options.tmpdir, ["-maxorphantx=1000", - "-whitelist=127.0.0.1"])) - - self.log.info("This test is time consuming, please be patient") - self.log.info("Splitting inputs so we can generate tx's") - self.txouts = [] - self.txouts2 = [] - # Split a coinbase into two transaction puzzle outputs - split_inputs(self.nodes[0], self.nodes[0].listunspent(0), self.txouts, True) - - # Mine - while (len(self.nodes[0].getrawmempool()) > 0): - self.nodes[0].generate(1) - - # Repeatedly split those 2 outputs, doubling twice for each rep - # Use txouts to monitor the available utxo, since these won't be tracked in wallet - reps = 0 - while (reps < 5): - #Double txouts to txouts2 - while (len(self.txouts)>0): - split_inputs(self.nodes[0], self.txouts, self.txouts2) - while (len(self.nodes[0].getrawmempool()) > 0): - self.nodes[0].generate(1) - #Double txouts2 to txouts - while (len(self.txouts2)>0): - split_inputs(self.nodes[0], self.txouts2, self.txouts) - while (len(self.nodes[0].getrawmempool()) > 0): - self.nodes[0].generate(1) - reps += 1 - self.log.info("Finished splitting") - - # Now we can connect the other nodes, didn't want to connect them earlier - # so the estimates would not be affected by the splitting transactions # Node1 mines small blocks but that are bigger than the expected transaction rate. # NOTE: the CreateNewBlock code starts counting block size at 1,000 bytes, # (17k is room enough for 110 or so transactions) - self.nodes.append(self.start_node(1, self.options.tmpdir, - ["-blockmaxsize=17000", "-maxorphantx=1000"])) - connect_nodes(self.nodes[1], 0) - # Node2 is a stingy miner, that # produces too small blocks (room for only 55 or so transactions) - node2args = ["-blockmaxsize=8000", "-maxorphantx=1000"] - self.nodes.append(self.start_node(2, self.options.tmpdir, node2args)) - connect_nodes(self.nodes[0], 2) - connect_nodes(self.nodes[2], 1) - - self.sync_all() def transact_and_mine(self, numblocks, mining_node): min_fee = Decimal("0.00001") @@ -232,9 +188,51 @@ class EstimateFeeTest(BitcoinTestFramework): self.memutxo = newmem def run_test(self): + self.log.info("This test is time consuming, please be patient") + self.log.info("Splitting inputs so we can generate tx's") + # Make log handler available to helper functions global log log = self.log + + # Start node0 + self.start_node(0) + self.txouts = [] + self.txouts2 = [] + # Split a coinbase into two transaction puzzle outputs + split_inputs(self.nodes[0], self.nodes[0].listunspent(0), self.txouts, True) + + # Mine + while (len(self.nodes[0].getrawmempool()) > 0): + self.nodes[0].generate(1) + + # Repeatedly split those 2 outputs, doubling twice for each rep + # Use txouts to monitor the available utxo, since these won't be tracked in wallet + reps = 0 + while (reps < 5): + #Double txouts to txouts2 + while (len(self.txouts)>0): + split_inputs(self.nodes[0], self.txouts, self.txouts2) + while (len(self.nodes[0].getrawmempool()) > 0): + self.nodes[0].generate(1) + #Double txouts2 to txouts + while (len(self.txouts2)>0): + split_inputs(self.nodes[0], self.txouts2, self.txouts) + while (len(self.nodes[0].getrawmempool()) > 0): + self.nodes[0].generate(1) + reps += 1 + self.log.info("Finished splitting") + + # Now we can connect the other nodes, didn't want to connect them earlier + # so the estimates would not be affected by the splitting transactions + self.start_node(1) + self.start_node(2) + connect_nodes(self.nodes[1], 0) + connect_nodes(self.nodes[0], 2) + connect_nodes(self.nodes[2], 1) + + self.sync_all() + self.fees_per_kb = [] self.memutxo = [] self.confutxo = self.txouts # Start with the set of confirmed txouts after splitting diff --git a/test/functional/test_framework/test_framework.py b/test/functional/test_framework/test_framework.py index 7903bb0045..103651f175 100755 --- a/test/functional/test_framework/test_framework.py +++ b/test/functional/test_framework/test_framework.py @@ -48,57 +48,30 @@ BITCOIND_PROC_WAIT_TIMEOUT = 60 class BitcoinTestFramework(object): """Base class for a bitcoin test script. - Individual bitcoin test scripts should subclass this class and override the following methods: + Individual bitcoin test scripts should subclass this class and override the set_test_params() and run_test() methods. + + Individual tests can also override the following methods to customize the test setup: - - __init__() - add_options() - setup_chain() - setup_network() - - run_test() + - setup_nodes() - The main() method should not be overridden. + The __init__() and main() methods should not be overridden. This class also contains various public and private helper methods.""" - # Methods to override in subclass test scripts. def __init__(self): - self.num_nodes = 4 + """Sets test framework defaults. Do not override this method. Instead, override the set_test_params() method""" self.setup_clean_chain = False self.nodes = [] self.mocktime = 0 + self.set_test_params() - def add_options(self, parser): - pass - - def setup_chain(self): - self.log.info("Initializing test directory " + self.options.tmpdir) - if self.setup_clean_chain: - self._initialize_chain_clean(self.options.tmpdir, self.num_nodes) - else: - self._initialize_chain(self.options.tmpdir, self.num_nodes, self.options.cachedir) - - def setup_network(self): - self.setup_nodes() - - # Connect the nodes as a "chain". This allows us - # to split the network between nodes 1 and 2 to get - # two halves that can work on competing chains. - for i in range(self.num_nodes - 1): - connect_nodes_bi(self.nodes, i, i + 1) - self.sync_all() - - def setup_nodes(self): - extra_args = None - if hasattr(self, "extra_args"): - extra_args = self.extra_args - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) - - def run_test(self): - raise NotImplementedError - - # Main function. This should not be overridden by the subclass test scripts. + assert hasattr(self, "num_nodes"), "Test must set self.num_nodes in set_test_params()" def main(self): + """Main function. This should not be overridden by the subclass test scripts.""" parser = optparse.OptionParser(usage="%prog [options]") parser.add_option("--nocleanup", dest="nocleanup", default=False, action="store_true", @@ -202,26 +175,50 @@ class BitcoinTestFramework(object): logging.shutdown() sys.exit(TEST_EXIT_FAILED) - # Public helper methods. These can be accessed by the subclass test scripts. + # Methods to override in subclass test scripts. + def set_test_params(self): + """Tests must this method to change default values for number of nodes, topology, etc""" + raise NotImplementedError - def start_node(self, i, dirname, extra_args=None, rpchost=None, timewait=None, binary=None, stderr=None): - """Start a bitcoind and return RPC connection to it""" + def add_options(self, parser): + """Override this method to add command-line options to the test""" + pass - if extra_args is None: - extra_args = [] - if binary is None: - binary = os.getenv("BITCOIND", "bitcoind") - node = TestNode(i, dirname, extra_args, rpchost, timewait, binary, stderr, self.mocktime, coverage_dir=self.options.coveragedir) - node.start() - node.wait_for_rpc_connection() + def setup_chain(self): + """Override this method to customize blockchain setup""" + self.log.info("Initializing test directory " + self.options.tmpdir) + if self.setup_clean_chain: + self._initialize_chain_clean() + else: + self._initialize_chain() - if self.options.coveragedir is not None: - coverage.write_all_rpc_commands(self.options.coveragedir, node.rpc) + def setup_network(self): + """Override this method to customize test network topology""" + self.setup_nodes() + + # Connect the nodes as a "chain". This allows us + # to split the network between nodes 1 and 2 to get + # two halves that can work on competing chains. + for i in range(self.num_nodes - 1): + connect_nodes_bi(self.nodes, i, i + 1) + self.sync_all() + + def setup_nodes(self): + """Override this method to customize test node setup""" + extra_args = None + if hasattr(self, "extra_args"): + extra_args = self.extra_args + self.add_nodes(self.num_nodes, extra_args) + self.start_nodes() - return node + def run_test(self): + """Tests must override this method to define test logic""" + raise NotImplementedError - def start_nodes(self, num_nodes, dirname, extra_args=None, rpchost=None, timewait=None, binary=None): - """Start multiple bitcoinds, return RPC connections to them""" + # Public helper methods. These can be accessed by the subclass test scripts. + + def add_nodes(self, num_nodes, extra_args=None, rpchost=None, timewait=None, binary=None): + """Instantiate TestNode objects""" if extra_args is None: extra_args = [[]] * num_nodes @@ -229,12 +226,30 @@ class BitcoinTestFramework(object): binary = [None] * num_nodes assert_equal(len(extra_args), num_nodes) assert_equal(len(binary), num_nodes) - nodes = [] + for i in range(num_nodes): + self.nodes.append(TestNode(i, self.options.tmpdir, extra_args[i], rpchost, timewait=timewait, binary=binary[i], stderr=None, mocktime=self.mocktime, coverage_dir=self.options.coveragedir)) + + def start_node(self, i, extra_args=None, stderr=None): + """Start a bitcoind""" + + node = self.nodes[i] + + node.start(extra_args, stderr) + node.wait_for_rpc_connection() + + if self.options.coveragedir is not None: + coverage.write_all_rpc_commands(self.options.coveragedir, node.rpc) + + def start_nodes(self, extra_args=None): + """Start multiple bitcoinds""" + + if extra_args is None: + extra_args = [None] * self.num_nodes + assert_equal(len(extra_args), self.num_nodes) try: - for i in range(num_nodes): - nodes.append(TestNode(i, dirname, extra_args[i], rpchost, timewait=timewait, binary=binary[i], stderr=None, mocktime=self.mocktime, coverage_dir=self.options.coveragedir)) - nodes[i].start() - for node in nodes: + for i, node in enumerate(self.nodes): + node.start(extra_args[i]) + for node in self.nodes: node.wait_for_rpc_connection() except: # If one node failed to start, stop the others @@ -242,11 +257,9 @@ class BitcoinTestFramework(object): raise if self.options.coveragedir is not None: - for node in nodes: + for node in self.nodes: coverage.write_all_rpc_commands(self.options.coveragedir, node.rpc) - return nodes - def stop_node(self, i): """Stop a bitcoind test node""" self.nodes[i].stop_node() @@ -264,10 +277,10 @@ class BitcoinTestFramework(object): while not node.is_node_stopped(): time.sleep(0.1) - def assert_start_raises_init_error(self, i, dirname, extra_args=None, expected_msg=None): + def assert_start_raises_init_error(self, i, extra_args=None, expected_msg=None): with tempfile.SpooledTemporaryFile(max_size=2**16) as log_stderr: try: - self.start_node(i, dirname, extra_args, stderr=log_stderr) + self.start_node(i, extra_args, stderr=log_stderr) self.stop_node(i) except Exception as e: assert 'bitcoind exited' in str(e) # node must have shutdown @@ -356,16 +369,16 @@ class BitcoinTestFramework(object): rpc_handler.setLevel(logging.DEBUG) rpc_logger.addHandler(rpc_handler) - def _initialize_chain(self, test_dir, num_nodes, cachedir): + def _initialize_chain(self): """Initialize a pre-mined blockchain for use by the test. Create a cache of a 200-block-long chain (with wallet) for MAX_NODES Afterward, create num_nodes copies from the cache.""" - assert num_nodes <= MAX_NODES + assert self.num_nodes <= MAX_NODES create_cache = False for i in range(MAX_NODES): - if not os.path.isdir(os.path.join(cachedir, 'node' + str(i))): + if not os.path.isdir(os.path.join(self.options.cachedir, 'node' + str(i))): create_cache = True break @@ -374,18 +387,18 @@ class BitcoinTestFramework(object): # find and delete old cache directories if any exist for i in range(MAX_NODES): - if os.path.isdir(os.path.join(cachedir, "node" + str(i))): - shutil.rmtree(os.path.join(cachedir, "node" + str(i))) + if os.path.isdir(os.path.join(self.options.cachedir, "node" + str(i))): + shutil.rmtree(os.path.join(self.options.cachedir, "node" + str(i))) # Create cache directories, run bitcoinds: for i in range(MAX_NODES): - datadir = initialize_datadir(cachedir, i) + datadir = initialize_datadir(self.options.cachedir, i) args = [os.getenv("BITCOIND", "bitcoind"), "-server", "-keypool=1", "-datadir=" + datadir, "-discover=0"] if i > 0: args.append("-connect=127.0.0.1:" + str(p2p_port(0))) - self.nodes.append(TestNode(i, cachedir, extra_args=[], rpchost=None, timewait=None, binary=None, stderr=None, mocktime=self.mocktime, coverage_dir=None)) + self.nodes.append(TestNode(i, self.options.cachedir, extra_args=[], rpchost=None, timewait=None, binary=None, stderr=None, mocktime=self.mocktime, coverage_dir=None)) self.nodes[i].args = args - self.nodes[i].start() + self.start_node(i) # Wait for RPC connections to be ready for node in self.nodes: @@ -414,24 +427,24 @@ class BitcoinTestFramework(object): self.nodes = [] self.disable_mocktime() for i in range(MAX_NODES): - os.remove(log_filename(cachedir, i, "debug.log")) - os.remove(log_filename(cachedir, i, "db.log")) - os.remove(log_filename(cachedir, i, "peers.dat")) - os.remove(log_filename(cachedir, i, "fee_estimates.dat")) - - for i in range(num_nodes): - from_dir = os.path.join(cachedir, "node" + str(i)) - to_dir = os.path.join(test_dir, "node" + str(i)) + os.remove(log_filename(self.options.cachedir, i, "debug.log")) + os.remove(log_filename(self.options.cachedir, i, "db.log")) + os.remove(log_filename(self.options.cachedir, i, "peers.dat")) + os.remove(log_filename(self.options.cachedir, i, "fee_estimates.dat")) + + for i in range(self.num_nodes): + from_dir = os.path.join(self.options.cachedir, "node" + str(i)) + to_dir = os.path.join(self.options.tmpdir, "node" + str(i)) shutil.copytree(from_dir, to_dir) - initialize_datadir(test_dir, i) # Overwrite port/rpcport in bitcoin.conf + initialize_datadir(self.options.tmpdir, i) # Overwrite port/rpcport in bitcoin.conf - def _initialize_chain_clean(self, test_dir, num_nodes): + def _initialize_chain_clean(self): """Initialize empty blockchain for use by the test. Create an empty blockchain and num_nodes wallets. Useful if a test case wants complete control over initialization.""" - for i in range(num_nodes): - initialize_datadir(test_dir, i) + for i in range(self.num_nodes): + initialize_datadir(self.options.tmpdir, i) class ComparisonTestFramework(BitcoinTestFramework): """Test framework for doing p2p comparison testing @@ -441,8 +454,7 @@ class ComparisonTestFramework(BitcoinTestFramework): - 2 binaries: 1 test binary, 1 ref binary - n>2 binaries: 1 test binary, n-1 ref binaries""" - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 self.setup_clean_chain = True @@ -455,13 +467,13 @@ class ComparisonTestFramework(BitcoinTestFramework): help="bitcoind binary to use for reference nodes (if any)") def setup_network(self): - extra_args = [['-whitelist=127.0.0.1']]*self.num_nodes + extra_args = [['-whitelist=127.0.0.1']] * self.num_nodes if hasattr(self, "extra_args"): extra_args = self.extra_args - self.nodes = self.start_nodes( - self.num_nodes, self.options.tmpdir, extra_args, - binary=[self.options.testbinary] + - [self.options.refbinary] * (self.num_nodes - 1)) + self.add_nodes(self.num_nodes, extra_args, + binary=[self.options.testbinary] + + [self.options.refbinary] * (self.num_nodes - 1)) + self.start_nodes() class SkipTest(Exception): """This exception is raised to skip a test""" diff --git a/test/functional/test_framework/test_node.py b/test/functional/test_framework/test_node.py index 7c1325e691..efb3ac9d16 100755 --- a/test/functional/test_framework/test_node.py +++ b/test/functional/test_framework/test_node.py @@ -65,9 +65,13 @@ class TestNode(): assert self.rpc_connected and self.rpc is not None, "Error: no RPC connection" return self.rpc.__getattr__(*args, **kwargs) - def start(self): + def start(self, extra_args=None, stderr=None): """Start the node.""" - self.process = subprocess.Popen(self.args + self.extra_args, stderr=self.stderr) + if extra_args is None: + extra_args = self.extra_args + if stderr is None: + stderr = self.stderr + self.process = subprocess.Popen(self.args + extra_args, stderr=stderr) self.running = True self.log.debug("bitcoind started, waiting for RPC to come up") @@ -78,7 +82,7 @@ class TestNode(): for _ in range(poll_per_s * self.rpc_timeout): assert self.process.poll() is None, "bitcoind exited with status %i during initialization" % self.process.returncode try: - self.rpc = get_rpc_proxy(rpc_url(self.datadir, self.index, self.rpchost), self.index, coveragedir=self.coverage_dir) + self.rpc = get_rpc_proxy(rpc_url(self.datadir, self.index, self.rpchost), self.index, timeout=self.rpc_timeout, coveragedir=self.coverage_dir) self.rpc.getblockcount() # If the call to getblockcount() succeeds then the RPC connection is up self.rpc_connected = True diff --git a/test/functional/txn_clone.py b/test/functional/txn_clone.py index 9b81af96cf..740bb2d4c5 100755 --- a/test/functional/txn_clone.py +++ b/test/functional/txn_clone.py @@ -8,11 +8,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class TxnMallTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 4 - self.setup_clean_chain = False def add_options(self, parser): parser.add_option("--mineblock", dest="mine_block", default=False, action="store_true", diff --git a/test/functional/txn_doublespend.py b/test/functional/txn_doublespend.py index 1bd3b3271c..69629ef951 100755 --- a/test/functional/txn_doublespend.py +++ b/test/functional/txn_doublespend.py @@ -8,11 +8,8 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class TxnMallTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 4 - self.setup_clean_chain = False def add_options(self, parser): parser.add_option("--mineblock", dest="mine_block", default=False, action="store_true", diff --git a/test/functional/uptime.py b/test/functional/uptime.py index b20d6f5cb6..78236b2393 100755 --- a/test/functional/uptime.py +++ b/test/functional/uptime.py @@ -13,9 +13,7 @@ from test_framework.test_framework import BitcoinTestFramework class UptimeTest(BitcoinTestFramework): - def __init__(self): - super().__init__() - + def set_test_params(self): self.num_nodes = 1 self.setup_clean_chain = True diff --git a/test/functional/wallet-accounts.py b/test/functional/wallet-accounts.py index 158aa9ae89..40726d2a76 100755 --- a/test/functional/wallet-accounts.py +++ b/test/functional/wallet-accounts.py @@ -17,9 +17,7 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import assert_equal class WalletAccountsTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 self.extra_args = [[]] diff --git a/test/functional/wallet-dump.py b/test/functional/wallet-dump.py index b573a95aba..e4757c8c03 100755 --- a/test/functional/wallet-dump.py +++ b/test/functional/wallet-dump.py @@ -56,10 +56,7 @@ def read_dump(file_name, addrs, hd_master_addr_old): class WalletDumpTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = False + def set_test_params(self): self.num_nodes = 1 self.extra_args = [["-keypool=90"]] @@ -68,7 +65,8 @@ class WalletDumpTest(BitcoinTestFramework): # longer than the default 30 seconds due to an expensive # CWallet::TopUpKeyPool call, and the encryptwallet RPC made later in # the test often takes even longer. - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=60) + self.add_nodes(self.num_nodes, self.extra_args, timewait=60) + self.start_nodes() def run_test (self): tmpdir = self.options.tmpdir @@ -95,7 +93,7 @@ class WalletDumpTest(BitcoinTestFramework): #encrypt wallet, restart, unlock and dump self.nodes[0].node_encrypt_wallet('test') - self.nodes[0] = self.start_node(0, self.options.tmpdir, self.extra_args[0]) + self.start_node(0) self.nodes[0].walletpassphrase('test', 10) # Should be a no-op: self.nodes[0].keypoolrefill() diff --git a/test/functional/wallet-encryption.py b/test/functional/wallet-encryption.py index 8fea4140db..f63bb2ea5e 100755 --- a/test/functional/wallet-encryption.py +++ b/test/functional/wallet-encryption.py @@ -13,9 +13,7 @@ from test_framework.util import ( ) class WalletEncryptionTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 1 @@ -31,7 +29,7 @@ class WalletEncryptionTest(BitcoinTestFramework): # Encrypt the wallet self.nodes[0].node_encrypt_wallet(passphrase) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) # Test that the wallet is encrypted assert_raises_jsonrpc(-13, "Please enter the wallet passphrase with walletpassphrase first", self.nodes[0].dumpprivkey, address) diff --git a/test/functional/wallet-hd.py b/test/functional/wallet-hd.py index 751512301e..a6b96b7455 100755 --- a/test/functional/wallet-hd.py +++ b/test/functional/wallet-hd.py @@ -11,11 +11,8 @@ from test_framework.util import ( ) import shutil - class WalletHDTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 self.extra_args = [['-usehd=0'], ['-usehd=1', '-keypool=0']] @@ -25,8 +22,8 @@ class WalletHDTest(BitcoinTestFramework): # Make sure can't switch off usehd after wallet creation self.stop_node(1) - self.assert_start_raises_init_error(1, self.options.tmpdir, ['-usehd=0'], 'already existing HD wallet') - self.nodes[1] = self.start_node(1, self.options.tmpdir, self.extra_args[1]) + self.assert_start_raises_init_error(1, ['-usehd=0'], 'already existing HD wallet') + self.start_node(1) connect_nodes_bi(self.nodes, 0, 1) # Make sure we use hd, keep masterkeyid @@ -76,7 +73,7 @@ class WalletHDTest(BitcoinTestFramework): shutil.rmtree(tmpdir + "/node1/regtest/blocks") shutil.rmtree(tmpdir + "/node1/regtest/chainstate") shutil.copyfile(tmpdir + "/hd.bak", tmpdir + "/node1/regtest/wallet.dat") - self.nodes[1] = self.start_node(1, self.options.tmpdir, self.extra_args[1]) + self.start_node(1) # Assert that derivation is deterministic hd_add_2 = None @@ -91,7 +88,7 @@ class WalletHDTest(BitcoinTestFramework): # Needs rescan self.stop_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir, self.extra_args[1] + ['-rescan']) + self.start_node(1, extra_args=self.extra_args[1] + ['-rescan']) assert_equal(self.nodes[1].getbalance(), num_hd_adds + 1) # send a tx and make sure its using the internal chain for the changeoutput diff --git a/test/functional/wallet.py b/test/functional/wallet.py index f58b09bdb4..27089e8845 100755 --- a/test/functional/wallet.py +++ b/test/functional/wallet.py @@ -7,28 +7,28 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class WalletTest(BitcoinTestFramework): - - def check_fee_amount(self, curr_balance, balance_with_fee, fee_per_byte, tx_size): - """Return curr_balance after asserting the fee was in range""" - fee = balance_with_fee - curr_balance - assert_fee_amount(fee, tx_size, fee_per_byte * 1000) - return curr_balance - - def __init__(self): - super().__init__() - self.setup_clean_chain = True + def set_test_params(self): self.num_nodes = 4 + self.setup_clean_chain = True self.extra_args = [['-usehd={:d}'.format(i%2==0)] for i in range(4)] def setup_network(self): - self.nodes = self.start_nodes(3, self.options.tmpdir, self.extra_args[:3]) + self.add_nodes(4, self.extra_args) + self.start_node(0) + self.start_node(1) + self.start_node(2) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) - self.sync_all() + self.sync_all([self.nodes[0:3]]) - def run_test(self): + def check_fee_amount(self, curr_balance, balance_with_fee, fee_per_byte, tx_size): + """Return curr_balance after asserting the fee was in range""" + fee = balance_with_fee - curr_balance + assert_fee_amount(fee, tx_size, fee_per_byte * 1000) + return curr_balance + def run_test(self): # Check that there's no UTXO on none of the nodes assert_equal(len(self.nodes[0].listunspent()), 0) assert_equal(len(self.nodes[1].listunspent()), 0) @@ -42,9 +42,9 @@ class WalletTest(BitcoinTestFramework): assert_equal(walletinfo['immature_balance'], 50) assert_equal(walletinfo['balance'], 0) - self.sync_all() + self.sync_all([self.nodes[0:3]]) self.nodes[1].generate(101) - self.sync_all() + self.sync_all([self.nodes[0:3]]) assert_equal(self.nodes[0].getbalance(), 50) assert_equal(self.nodes[1].getbalance(), 50) @@ -96,7 +96,7 @@ class WalletTest(BitcoinTestFramework): # Have node0 mine a block, thus it will collect its own fee. self.nodes[0].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) # Exercise locking of unspent outputs unspent_0 = self.nodes[2].listunspent()[0] @@ -109,7 +109,7 @@ class WalletTest(BitcoinTestFramework): # Have node1 generate 100 blocks (so node0 can recover the fee) self.nodes[1].generate(100) - self.sync_all() + self.sync_all([self.nodes[0:3]]) # node0 should end up with 100 btc in block rewards plus fees, but # minus the 21 plus fees sent to node2 @@ -138,7 +138,7 @@ class WalletTest(BitcoinTestFramework): # Have node1 mine a block to confirm transactions: self.nodes[1].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) assert_equal(self.nodes[0].getbalance(), 0) assert_equal(self.nodes[2].getbalance(), 94) @@ -150,14 +150,14 @@ class WalletTest(BitcoinTestFramework): self.nodes[2].settxfee(fee_per_byte * 1000) txid = self.nodes[2].sendtoaddress(address, 10, "", "", False) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal = self.check_fee_amount(self.nodes[2].getbalance(), Decimal('84'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) assert_equal(self.nodes[0].getbalance(), Decimal('10')) # Send 10 BTC with subtract fee from amount txid = self.nodes[2].sendtoaddress(address, 10, "", "", True) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal -= Decimal('10') assert_equal(self.nodes[2].getbalance(), node_2_bal) node_0_bal = self.check_fee_amount(self.nodes[0].getbalance(), Decimal('20'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) @@ -165,7 +165,7 @@ class WalletTest(BitcoinTestFramework): # Sendmany 10 BTC txid = self.nodes[2].sendmany('from1', {address: 10}, 0, "", []) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_0_bal += Decimal('10') node_2_bal = self.check_fee_amount(self.nodes[2].getbalance(), node_2_bal - Decimal('10'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) assert_equal(self.nodes[0].getbalance(), node_0_bal) @@ -173,7 +173,7 @@ class WalletTest(BitcoinTestFramework): # Sendmany 10 BTC with subtract fee from amount txid = self.nodes[2].sendmany('from1', {address: 10}, 0, "", [address]) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal -= Decimal('10') assert_equal(self.nodes[2].getbalance(), node_2_bal) node_0_bal = self.check_fee_amount(self.nodes[0].getbalance(), node_0_bal + Decimal('10'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) @@ -184,9 +184,9 @@ class WalletTest(BitcoinTestFramework): # EXPECT: nodes[3] should have those transactions in its mempool. txid1 = self.nodes[0].sendtoaddress(self.nodes[1].getnewaddress(), 1) txid2 = self.nodes[1].sendtoaddress(self.nodes[0].getnewaddress(), 1) - sync_mempools(self.nodes) + sync_mempools(self.nodes[0:2]) - self.nodes.append(self.start_node(3, self.options.tmpdir, self.extra_args[3])) + self.start_node(3) connect_nodes_bi(self.nodes, 0, 3) sync_blocks(self.nodes) @@ -230,22 +230,24 @@ class WalletTest(BitcoinTestFramework): #do some -walletbroadcast tests self.stop_nodes() - self.nodes = self.start_nodes(3, self.options.tmpdir, [["-walletbroadcast=0"],["-walletbroadcast=0"],["-walletbroadcast=0"]]) + self.start_node(0, ["-walletbroadcast=0"]) + self.start_node(1, ["-walletbroadcast=0"]) + self.start_node(2, ["-walletbroadcast=0"]) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) - self.sync_all() + self.sync_all([self.nodes[0:3]]) txIdNotBroadcasted = self.nodes[0].sendtoaddress(self.nodes[2].getnewaddress(), 2) txObjNotBroadcasted = self.nodes[0].gettransaction(txIdNotBroadcasted) self.nodes[1].generate(1) #mine a block, tx should not be in there - self.sync_all() + self.sync_all([self.nodes[0:3]]) assert_equal(self.nodes[2].getbalance(), node_2_bal) #should not be changed because tx was not broadcasted #now broadcast from another node, mine a block, sync, and check the balance self.nodes[1].sendrawtransaction(txObjNotBroadcasted['hex']) self.nodes[1].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal += 2 txObjNotBroadcasted = self.nodes[0].gettransaction(txIdNotBroadcasted) assert_equal(self.nodes[2].getbalance(), node_2_bal) @@ -255,14 +257,16 @@ class WalletTest(BitcoinTestFramework): #restart the nodes with -walletbroadcast=1 self.stop_nodes() - self.nodes = self.start_nodes(3, self.options.tmpdir) + self.start_node(0) + self.start_node(1) + self.start_node(2) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) - sync_blocks(self.nodes) + sync_blocks(self.nodes[0:3]) self.nodes[0].generate(1) - sync_blocks(self.nodes) + sync_blocks(self.nodes[0:3]) node_2_bal += 2 #tx should be added to balance because after restarting the nodes tx should be broadcastet @@ -293,7 +297,7 @@ class WalletTest(BitcoinTestFramework): address_to_import = self.nodes[2].getnewaddress() txid = self.nodes[0].sendtoaddress(address_to_import, 1) self.nodes[0].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) # 2. Import address from node2 to node1 self.nodes[1].importaddress(address_to_import) @@ -319,15 +323,15 @@ class WalletTest(BitcoinTestFramework): cbAddr = self.nodes[1].getnewaddress() blkHash = self.nodes[0].generatetoaddress(1, cbAddr)[0] cbTxId = self.nodes[0].getblock(blkHash)['tx'][0] - self.sync_all() + self.sync_all([self.nodes[0:3]]) # Check that the txid and balance is found by node1 self.nodes[1].gettransaction(cbTxId) # check if wallet or blockchain maintenance changes the balance - self.sync_all() + self.sync_all([self.nodes[0:3]]) blocks = self.nodes[0].generate(2) - self.sync_all() + self.sync_all([self.nodes[0:3]]) balance_nodes = [self.nodes[i].getbalance() for i in range(3)] block_count = self.nodes[0].getblockcount() @@ -358,7 +362,9 @@ class WalletTest(BitcoinTestFramework): self.log.info("check " + m) self.stop_nodes() # set lower ancestor limit for later - self.nodes = self.start_nodes(3, self.options.tmpdir, [[m, "-limitancestorcount="+str(chainlimit)]] * 3) + self.start_node(0, [m, "-limitancestorcount="+str(chainlimit)]) + self.start_node(1, [m, "-limitancestorcount="+str(chainlimit)]) + self.start_node(2, [m, "-limitancestorcount="+str(chainlimit)]) while m == '-reindex' and [block_count] * 3 != [self.nodes[i].getblockcount() for i in range(3)]: # reindex will leave rpc warm up "early"; Wait for it to finish time.sleep(0.1) @@ -406,7 +412,7 @@ class WalletTest(BitcoinTestFramework): # Try with walletrejectlongchains # Double chain limit but require combining inputs, so we pass SelectCoinsMinConf self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-walletrejectlongchains", "-limitancestorcount="+str(2*chainlimit)]) + self.start_node(0, extra_args=["-walletrejectlongchains", "-limitancestorcount="+str(2*chainlimit)]) # wait for loadmempool timeout = 10 diff --git a/test/functional/walletbackup.py b/test/functional/walletbackup.py index ff51cba4b3..15ea26afa1 100755 --- a/test/functional/walletbackup.py +++ b/test/functional/walletbackup.py @@ -37,11 +37,9 @@ from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * class WalletBackupTest(BitcoinTestFramework): - - def __init__(self): - super().__init__() - self.setup_clean_chain = True + def set_test_params(self): self.num_nodes = 4 + self.setup_clean_chain = True # nodes 1, 2,3 are spenders, let's give them a keypool=100 self.extra_args = [["-keypool=100"], ["-keypool=100"], ["-keypool=100"], []] @@ -78,9 +76,9 @@ class WalletBackupTest(BitcoinTestFramework): # As above, this mirrors the original bash test. def start_three(self): - self.nodes[0] = self.start_node(0, self.options.tmpdir) - self.nodes[1] = self.start_node(1, self.options.tmpdir) - self.nodes[2] = self.start_node(2, self.options.tmpdir) + self.start_node(0) + self.start_node(1) + self.start_node(2) connect_nodes(self.nodes[0], 3) connect_nodes(self.nodes[1], 3) connect_nodes(self.nodes[2], 3) diff --git a/test/functional/zapwallettxes.py b/test/functional/zapwallettxes.py index af867d7a52..c001517a6d 100755 --- a/test/functional/zapwallettxes.py +++ b/test/functional/zapwallettxes.py @@ -20,9 +20,7 @@ from test_framework.util import (assert_equal, ) class ZapWalletTXesTest (BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.setup_clean_chain = True self.num_nodes = 2 @@ -48,7 +46,7 @@ class ZapWalletTXesTest (BitcoinTestFramework): # Stop-start node0. Both confirmed and unconfirmed transactions remain in the wallet. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) assert_equal(self.nodes[0].gettransaction(txid1)['txid'], txid1) assert_equal(self.nodes[0].gettransaction(txid2)['txid'], txid2) @@ -56,7 +54,7 @@ class ZapWalletTXesTest (BitcoinTestFramework): # Stop node0 and restart with zapwallettxes and persistmempool. The unconfirmed # transaction is zapped from the wallet, but is re-added when the mempool is reloaded. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-persistmempool=1", "-zapwallettxes=2"]) + self.start_node(0, ["-persistmempool=1", "-zapwallettxes=2"]) assert_equal(self.nodes[0].gettransaction(txid1)['txid'], txid1) assert_equal(self.nodes[0].gettransaction(txid2)['txid'], txid2) @@ -64,7 +62,7 @@ class ZapWalletTXesTest (BitcoinTestFramework): # Stop node0 and restart with zapwallettxes, but not persistmempool. # The unconfirmed transaction is zapped and is no longer in the wallet. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-zapwallettxes=2"]) + self.start_node(0, ["-zapwallettxes=2"]) # tx1 is still be available because it was confirmed assert_equal(self.nodes[0].gettransaction(txid1)['txid'], txid1) diff --git a/test/functional/zmq_test.py b/test/functional/zmq_test.py index 26c946d215..3f2668ee87 100755 --- a/test/functional/zmq_test.py +++ b/test/functional/zmq_test.py @@ -13,9 +13,7 @@ from test_framework.util import (assert_equal, ) class ZMQTest (BitcoinTestFramework): - - def __init__(self): - super().__init__() + def set_test_params(self): self.num_nodes = 2 def setup_nodes(self): @@ -41,8 +39,9 @@ class ZMQTest (BitcoinTestFramework): self.zmqSubSocket.setsockopt(zmq.SUBSCRIBE, b"hashtx") ip_address = "tcp://127.0.0.1:28332" self.zmqSubSocket.connect(ip_address) - extra_args = [['-zmqpubhashtx=%s' % ip_address, '-zmqpubhashblock=%s' % ip_address], []] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.extra_args = [['-zmqpubhashtx=%s' % ip_address, '-zmqpubhashblock=%s' % ip_address], []] + self.add_nodes(self.num_nodes, self.extra_args) + self.start_nodes() def run_test(self): try: |