diff options
Diffstat (limited to 'test/functional')
| -rwxr-xr-x | test/functional/address_types.py | 125 |
1 files changed, 110 insertions, 15 deletions
diff --git a/test/functional/address_types.py b/test/functional/address_types.py index 9984e171f0..38a3425214 100755 --- a/test/functional/address_types.py +++ b/test/functional/address_types.py @@ -4,16 +4,24 @@ # file COPYING or http://www.opensource.org/licenses/mit-license.php. """Test that the wallet can send and receive using all combinations of address types. -There are 4 nodes-under-test: +There are 5 nodes-under-test: - node0 uses legacy addresses - node1 uses p2sh/segwit addresses - node2 uses p2sh/segwit addresses and bech32 addresses for change - node3 uses bech32 addresses + - node4 uses a p2sh/segwit addresses for change -node4 exists to generate new blocks. +node5 exists to generate new blocks. -The script is a series of tests, iterating over the 4 nodes. In each iteration -of the test, one node sends: +## Multisig address test + +Test that adding a multisig address with: + - an uncompressed pubkey always gives a legacy address + - only compressed pubkeys gives the an `-addresstype` address + +## Sending to address types test + +A series of tests, iterating over node0-node4. In each iteration of the test, one node sends: - 10/101th of its balance to itself (using getrawchangeaddress for single key addresses) - 20/101th to the next node - 30/101th to the node after that @@ -21,21 +29,51 @@ of the test, one node sends: - 1/101th remains as fee+change Iterate over each node for single key addresses, and then over each node for -multisig addresses. In a second iteration, the same is done, but with explicit address_type -parameters passed to getnewaddress and getrawchangeaddress. Node0 and node3 send to p2sh, -node 1 sends to bech32, and node2 sends to legacy. As every node sends coins after receiving, -this also verifies that spending coins sent to all these address types works.""" +multisig addresses. + +Repeat test, but with explicit address_type parameters passed to getnewaddress +and getrawchangeaddress: + - node0 and node3 send to p2sh. + - node1 sends to bech32. + - node2 sends to legacy. + +As every node sends coins after receiving, this also +verifies that spending coins sent to all these address types works. + +## Change type test + +Test that the nodes generate the correct change address type: + - node0 always uses a legacy change address. + - node1 uses a bech32 addresses for change if any destination address is bech32. + - node2 always uses a bech32 address for change + - node3 always uses a bech32 address for change + - node4 always uses p2sh/segwit output for change. +""" from decimal import Decimal import itertools from test_framework.test_framework import BitcoinTestFramework -from test_framework.util import assert_equal, assert_greater_than, connect_nodes_bi, sync_blocks, sync_mempools +from test_framework.util import ( + assert_equal, + assert_greater_than, + assert_raises_rpc_error, + connect_nodes_bi, + sync_blocks, + sync_mempools, +) class AddressTypeTest(BitcoinTestFramework): def set_test_params(self): - self.num_nodes = 5 - self.extra_args = [["-addresstype=legacy"], ["-addresstype=p2sh-segwit"], ["-addresstype=p2sh-segwit", "-changetype=bech32"], ["-addresstype=bech32"], []] + self.num_nodes = 6 + self.extra_args = [ + ["-addresstype=legacy"], + ["-addresstype=p2sh-segwit"], + ["-addresstype=p2sh-segwit", "-changetype=bech32"], + ["-addresstype=bech32"], + ["-changetype=p2sh-segwit"], + [] + ] def setup_network(self): self.setup_nodes() @@ -104,10 +142,26 @@ class AddressTypeTest(BitcoinTestFramework): # Unknown type assert(False) + def test_change_output_type(self, node_sender, destinations, expected_type): + txid = self.nodes[node_sender].sendmany(fromaccount="", amounts=dict.fromkeys(destinations, 0.001)) + raw_tx = self.nodes[node_sender].getrawtransaction(txid) + tx = self.nodes[node_sender].decoderawtransaction(raw_tx) + + # Make sure the transaction has change: + assert_equal(len(tx["vout"]), len(destinations) + 1) + + # Make sure the destinations are included, and remove them: + output_addresses = [vout['scriptPubKey']['addresses'][0] for vout in tx["vout"]] + change_addresses = [d for d in output_addresses if d not in destinations] + assert_equal(len(change_addresses), 1) + + self.log.debug("Check if change address " + change_addresses[0] + " is " + expected_type) + self.test_address(node_sender, change_addresses[0], multisig=False, typ=expected_type) + def run_test(self): - # Mine 101 blocks on node4 to bring nodes out of IBD and make sure that + # Mine 101 blocks on node5 to bring nodes out of IBD and make sure that # no coinbases are maturing for the nodes-under-test during the test - self.nodes[4].generate(101) + self.nodes[5].generate(101) sync_blocks(self.nodes) uncompressed_1 = "0496b538e853519c726a2c91e61ec11600ae1390813a627c66fb8be7947be63c52da7589379515d4e0a604f8141781e62294721166bf621e73a82cbf2342c858ee" @@ -182,8 +236,8 @@ class AddressTypeTest(BitcoinTestFramework): to_node %= 4 assert_equal(unconf_balances[to_node], to_send * 10 * (2 + n)) - # node4 collects fee and block subsidy to keep accounting simple - self.nodes[4].generate(1) + # node5 collects fee and block subsidy to keep accounting simple + self.nodes[5].generate(1) sync_blocks(self.nodes) new_balances = self.get_balances() @@ -195,5 +249,46 @@ class AddressTypeTest(BitcoinTestFramework): to_node %= 4 assert_equal(new_balances[to_node], old_balances[to_node] + to_send * 10 * (2 + n)) + # Get one p2sh/segwit address from node2 and two bech32 addresses from node3: + to_address_p2sh = self.nodes[2].getnewaddress() + to_address_bech32_1 = self.nodes[3].getnewaddress() + to_address_bech32_2 = self.nodes[3].getnewaddress() + + # Fund node 4: + self.nodes[5].sendtoaddress(self.nodes[4].getnewaddress(), Decimal("1")) + self.nodes[5].generate(1) + sync_blocks(self.nodes) + assert_equal(self.nodes[4].getbalance(), 1) + + self.log.info("Nodes with addresstype=legacy never use a P2WPKH change output") + self.test_change_output_type(0, [to_address_bech32_1], 'legacy') + + self.log.info("Nodes with addresstype=p2sh-segwit only use a P2WPKH change output if any destination address is bech32:") + self.test_change_output_type(1, [to_address_p2sh], 'p2sh-segwit') + self.test_change_output_type(1, [to_address_bech32_1], 'bech32') + self.test_change_output_type(1, [to_address_p2sh, to_address_bech32_1], 'bech32') + self.test_change_output_type(1, [to_address_bech32_1, to_address_bech32_2], 'bech32') + + self.log.info("Nodes with change_type=bech32 always use a P2WPKH change output:") + self.test_change_output_type(2, [to_address_bech32_1], 'bech32') + self.test_change_output_type(2, [to_address_p2sh], 'bech32') + + self.log.info("Nodes with addresstype=bech32 always use a P2WPKH change output (unless changetype is set otherwise):") + self.test_change_output_type(3, [to_address_bech32_1], 'bech32') + self.test_change_output_type(3, [to_address_p2sh], 'bech32') + + self.log.info('getrawchangeaddress defaults to addresstype if -changetype is not set and argument is absent') + self.test_address(3, self.nodes[3].getrawchangeaddress(), multisig=False, typ='bech32') + + self.log.info('getrawchangeaddress fails with invalid changetype argument') + assert_raises_rpc_error(-5, "Unknown address type 'bech23'", self.nodes[3].getrawchangeaddress, 'bech23') + + self.log.info("Nodes with changetype=p2sh-segwit never use a P2WPKH change output") + self.test_change_output_type(4, [to_address_bech32_1], 'p2sh-segwit') + self.test_address(4, self.nodes[4].getrawchangeaddress(), multisig=False, typ='p2sh-segwit') + self.log.info("Except for getrawchangeaddress if specified:") + self.test_address(4, self.nodes[4].getrawchangeaddress(), multisig=False, typ='p2sh-segwit') + self.test_address(4, self.nodes[4].getrawchangeaddress('bech32'), multisig=False, typ='bech32') + if __name__ == '__main__': AddressTypeTest().main() |