diff options
Diffstat (limited to 'src/wallet')
-rw-r--r-- | src/wallet/rpcwallet.cpp | 68 |
1 files changed, 34 insertions, 34 deletions
diff --git a/src/wallet/rpcwallet.cpp b/src/wallet/rpcwallet.cpp index da50f6f215..10af5c36c8 100644 --- a/src/wallet/rpcwallet.cpp +++ b/src/wallet/rpcwallet.cpp @@ -433,18 +433,18 @@ static RPCHelpMan sendtoaddress() {"address", RPCArg::Type::STR, RPCArg::Optional::NO, "The bitcoin address to send to."}, {"amount", RPCArg::Type::AMOUNT, RPCArg::Optional::NO, "The amount in " + CURRENCY_UNIT + " to send. eg 0.1"}, {"comment", RPCArg::Type::STR, RPCArg::Optional::OMITTED_NAMED_ARG, "A comment used to store what the transaction is for.\n" - " This is not part of the transaction, just kept in your wallet."}, + "This is not part of the transaction, just kept in your wallet."}, {"comment_to", RPCArg::Type::STR, RPCArg::Optional::OMITTED_NAMED_ARG, "A comment to store the name of the person or organization\n" - " to which you're sending the transaction. This is not part of the \n" - " transaction, just kept in your wallet."}, + "to which you're sending the transaction. This is not part of the \n" + "transaction, just kept in your wallet."}, {"subtractfeefromamount", RPCArg::Type::BOOL, /* default */ "false", "The fee will be deducted from the amount being sent.\n" - " The recipient will receive less bitcoins than you enter in the amount field."}, + "The recipient will receive less bitcoins than you enter in the amount field."}, {"replaceable", RPCArg::Type::BOOL, /* default */ "wallet default", "Allow this transaction to be replaced by a transaction with higher fees via BIP 125"}, {"conf_target", RPCArg::Type::NUM, /* default */ "wallet default", "Confirmation target (in blocks), or fee rate (for " + CURRENCY_UNIT + "/kB or " + CURRENCY_ATOM + "/B estimate modes)"}, {"estimate_mode", RPCArg::Type::STR, /* default */ "unset", std::string() + "The fee estimate mode, must be one of (case insensitive):\n" " \"" + FeeModes("\"\n\"") + "\""}, {"avoid_reuse", RPCArg::Type::BOOL, /* default */ "true", "(only available if avoid_reuse wallet flag is set) Avoid spending from dirty addresses; addresses are considered\n" - " dirty if they have previously been used in a transaction."}, + "dirty if they have previously been used in a transaction."}, {"verbose", RPCArg::Type::BOOL, /* default */ "false", "If true, return extra information about the transaction."}, }, { @@ -860,9 +860,9 @@ static RPCHelpMan sendmany() {"minconf", RPCArg::Type::NUM, RPCArg::Optional::OMITTED_NAMED_ARG, "Ignored dummy value"}, {"comment", RPCArg::Type::STR, RPCArg::Optional::OMITTED_NAMED_ARG, "A comment"}, {"subtractfeefrom", RPCArg::Type::ARR, RPCArg::Optional::OMITTED_NAMED_ARG, "The addresses.\n" - " The fee will be equally deducted from the amount of each selected address.\n" - " Those recipients will receive less bitcoins than you enter in their corresponding amount field.\n" - " If no addresses are specified here, the sender pays the fee.", + "The fee will be equally deducted from the amount of each selected address.\n" + "Those recipients will receive less bitcoins than you enter in their corresponding amount field.\n" + "If no addresses are specified here, the sender pays the fee.", { {"address", RPCArg::Type::STR, RPCArg::Optional::OMITTED, "Subtract fee from this address"}, }, @@ -875,7 +875,7 @@ static RPCHelpMan sendmany() }, { RPCResult{"if verbose is not set or set to false", - RPCResult::Type::STR_HEX, "txid", "The transaction id for the send. Only 1 transaction is created regardless of\n" + RPCResult::Type::STR_HEX, "txid", "The transaction id for the send. Only 1 transaction is created regardless of\n" "the number of addresses." }, RPCResult{"if verbose is set to true", @@ -1513,7 +1513,7 @@ static RPCHelpMan listsinceblock() {"target_confirmations", RPCArg::Type::NUM, /* default */ "1", "Return the nth block hash from the main chain. e.g. 1 would mean the best block hash. Note: this is not used as a filter, but only affects [lastblock] in the return value"}, {"include_watchonly", RPCArg::Type::BOOL, /* default */ "true for watch-only wallets, otherwise false", "Include transactions to watch-only addresses (see 'importaddress')"}, {"include_removed", RPCArg::Type::BOOL, /* default */ "true", "Show transactions that were removed due to a reorg in the \"removed\" array\n" - " (not guaranteed to work on pruned nodes)"}, + "(not guaranteed to work on pruned nodes)"}, }, RPCResult{ RPCResult::Type::OBJ, "", "", @@ -2832,7 +2832,7 @@ static RPCHelpMan listunspent() }, }, {"include_unsafe", RPCArg::Type::BOOL, /* default */ "true", "Include outputs that are not safe to spend\n" - " See description of \"safe\" attribute below."}, + "See description of \"safe\" attribute below."}, {"query_options", RPCArg::Type::OBJ, RPCArg::Optional::OMITTED_NAMED_ARG, "JSON with query options", { {"minimumAmount", RPCArg::Type::AMOUNT, /* default */ "0", "Minimum value of each UTXO in " + CURRENCY_UNIT + ""}, @@ -3196,15 +3196,15 @@ static RPCHelpMan fundrawtransaction() {"lockUnspents", RPCArg::Type::BOOL, /* default */ "false", "Lock selected unspent outputs"}, {"feeRate", RPCArg::Type::AMOUNT, /* default */ "not set: makes wallet determine the fee", "Set a specific fee rate in " + CURRENCY_UNIT + "/kB"}, {"subtractFeeFromOutputs", RPCArg::Type::ARR, /* default */ "empty array", "The integers.\n" - " The fee will be equally deducted from the amount of each specified output.\n" - " Those recipients will receive less bitcoins than you enter in their corresponding amount field.\n" - " If no outputs are specified here, the sender pays the fee.", + "The fee will be equally deducted from the amount of each specified output.\n" + "Those recipients will receive less bitcoins than you enter in their corresponding amount field.\n" + "If no outputs are specified here, the sender pays the fee.", { {"vout_index", RPCArg::Type::NUM, RPCArg::Optional::OMITTED, "The zero-based output index, before a change output is added."}, }, }, {"replaceable", RPCArg::Type::BOOL, /* default */ "wallet default", "Marks this transaction as BIP125 replaceable.\n" - " Allows this transaction to be replaced by a transaction with higher fees"}, + "Allows this transaction to be replaced by a transaction with higher fees"}, {"conf_target", RPCArg::Type::NUM, /* default */ "wallet default", "Confirmation target (in blocks), or fee rate (for " + CURRENCY_UNIT + "/kB or " + CURRENCY_ATOM + "/B estimate modes)"}, {"estimate_mode", RPCArg::Type::STR, /* default */ "unset", std::string() + "The fee estimate mode, must be one of (case insensitive):\n" " \"" + FeeModes("\"\n\"") + "\""}, @@ -3384,15 +3384,15 @@ static RPCHelpMan bumpfee_helper(std::string method_name) { {"conf_target", RPCArg::Type::NUM, /* default */ "wallet default", "Confirmation target (in blocks)"}, {"fee_rate", RPCArg::Type::NUM, /* default */ "fall back to 'conf_target'", "fee rate (NOT total fee) to pay, in " + CURRENCY_UNIT + " per kB\n" - " Specify a fee rate instead of relying on the built-in fee estimator.\n" + "Specify a fee rate instead of relying on the built-in fee estimator.\n" "Must be at least 0.0001 " + CURRENCY_UNIT + " per kB higher than the current transaction fee rate.\n"}, {"replaceable", RPCArg::Type::BOOL, /* default */ "true", "Whether the new transaction should still be\n" - " marked bip-125 replaceable. If true, the sequence numbers in the transaction will\n" - " be left unchanged from the original. If false, any input sequence numbers in the\n" - " original transaction that were less than 0xfffffffe will be increased to 0xfffffffe\n" - " so the new transaction will not be explicitly bip-125 replaceable (though it may\n" - " still be replaceable in practice, for example if it has unconfirmed ancestors which\n" - " are replaceable)."}, + "marked bip-125 replaceable. If true, the sequence numbers in the transaction will\n" + "be left unchanged from the original. If false, any input sequence numbers in the\n" + "original transaction that were less than 0xfffffffe will be increased to 0xfffffffe\n" + "so the new transaction will not be explicitly bip-125 replaceable (though it may\n" + "still be replaceable in practice, for example if it has unconfirmed ancestors which\n" + "are replaceable)."}, {"estimate_mode", RPCArg::Type::STR, /* default */ "unset", std::string() + "The fee estimate mode, must be one of (case insensitive):\n" " \"" + FeeModes("\"\n\"") + "\""}, }, @@ -3774,7 +3774,7 @@ RPCHelpMan getaddressinfo() {RPCResult::Type::NUM, "witness_version", /* optional */ true, "The version number of the witness program."}, {RPCResult::Type::STR_HEX, "witness_program", /* optional */ true, "The hex value of the witness program."}, {RPCResult::Type::STR, "script", /* optional */ true, "The output script type. Only if isscript is true and the redeemscript is known. Possible\n" - " types: nonstandard, pubkey, pubkeyhash, scripthash, multisig, nulldata, witness_v0_keyhash,\n" + "types: nonstandard, pubkey, pubkeyhash, scripthash, multisig, nulldata, witness_v0_keyhash,\n" "witness_v0_scripthash, witness_unknown."}, {RPCResult::Type::STR_HEX, "hex", /* optional */ true, "The redeemscript for the p2sh address."}, {RPCResult::Type::ARR, "pubkeys", /* optional */ true, "Array of pubkeys associated with the known redeemscript (only if script is multisig).", @@ -3993,7 +3993,7 @@ static RPCHelpMan send() "\nEXPERIMENTAL warning: this call may be changed in future releases.\n" "\nSend a transaction.\n", { - {"outputs", RPCArg::Type::ARR, RPCArg::Optional::NO, "A JSON array with outputs (key-value pairs), where none of the keys are duplicated.\n" + {"outputs", RPCArg::Type::ARR, RPCArg::Optional::NO, "The outputs (key-value pairs), where none of the keys are duplicated.\n" "That is, each address can only appear once and there can only be one 'data' object.\n" "For convenience, a dictionary, which holds the key-value pairs directly, is also accepted.", { @@ -4044,7 +4044,7 @@ static RPCHelpMan send() }, }, {"replaceable", RPCArg::Type::BOOL, /* default */ "wallet default", "Marks this transaction as BIP125 replaceable.\n" - " Allows this transaction to be replaced by a transaction with higher fees"}, + "Allows this transaction to be replaced by a transaction with higher fees"}, }, "options"}, }, @@ -4174,11 +4174,11 @@ static RPCHelpMan sethdseed() HELP_REQUIRING_PASSPHRASE, { {"newkeypool", RPCArg::Type::BOOL, /* default */ "true", "Whether to flush old unused addresses, including change addresses, from the keypool and regenerate it.\n" - " If true, the next address from getnewaddress and change address from getrawchangeaddress will be from this new seed.\n" - " If false, addresses (including change addresses if the wallet already had HD Chain Split enabled) from the existing\n" - " keypool will be used until it has been depleted."}, + "If true, the next address from getnewaddress and change address from getrawchangeaddress will be from this new seed.\n" + "If false, addresses (including change addresses if the wallet already had HD Chain Split enabled) from the existing\n" + "keypool will be used until it has been depleted."}, {"seed", RPCArg::Type::STR, /* default */ "random seed", "The WIF private key to use as the new HD seed.\n" - " The seed value can be retrieved using the dumpwallet command. It is the private key marked hdseed=1"}, + "The seed value can be retrieved using the dumpwallet command. It is the private key marked hdseed=1"}, }, RPCResult{RPCResult::Type::NONE, "", ""}, RPCExamples{ @@ -4323,7 +4323,7 @@ static RPCHelpMan walletcreatefundedpsbt() {"outputs", RPCArg::Type::ARR, RPCArg::Optional::NO, "The outputs (key-value pairs), where none of the keys are duplicated.\n" "That is, each address can only appear once and there can only be one 'data' object.\n" "For compatibility reasons, a dictionary, which holds the key-value pairs directly, is also\n" - " accepted as second parameter.", + "accepted as second parameter.", { {"", RPCArg::Type::OBJ, RPCArg::Optional::OMITTED, "", { @@ -4348,15 +4348,15 @@ static RPCHelpMan walletcreatefundedpsbt() {"lockUnspents", RPCArg::Type::BOOL, /* default */ "false", "Lock selected unspent outputs"}, {"feeRate", RPCArg::Type::AMOUNT, /* default */ "not set: makes wallet determine the fee", "Set a specific fee rate in " + CURRENCY_UNIT + "/kB"}, {"subtractFeeFromOutputs", RPCArg::Type::ARR, /* default */ "empty array", "The outputs to subtract the fee from.\n" - " The fee will be equally deducted from the amount of each specified output.\n" - " Those recipients will receive less bitcoins than you enter in their corresponding amount field.\n" - " If no outputs are specified here, the sender pays the fee.", + "The fee will be equally deducted from the amount of each specified output.\n" + "Those recipients will receive less bitcoins than you enter in their corresponding amount field.\n" + "If no outputs are specified here, the sender pays the fee.", { {"vout_index", RPCArg::Type::NUM, RPCArg::Optional::OMITTED, "The zero-based output index, before a change output is added."}, }, }, {"replaceable", RPCArg::Type::BOOL, /* default */ "wallet default", "Marks this transaction as BIP125 replaceable.\n" - " Allows this transaction to be replaced by a transaction with higher fees"}, + "Allows this transaction to be replaced by a transaction with higher fees"}, {"conf_target", RPCArg::Type::NUM, /* default */ "fall back to wallet's confirmation target (txconfirmtarget)", "Confirmation target (in blocks)"}, {"estimate_mode", RPCArg::Type::STR, /* default */ "unset", std::string() + "The fee estimate mode, must be one of (case insensitive):\n" " \"" + FeeModes("\"\n\"") + "\""}, |