diff options
Diffstat (limited to 'src/wallet/init.cpp')
| -rw-r--r-- | src/wallet/init.cpp | 70 |
1 files changed, 31 insertions, 39 deletions
diff --git a/src/wallet/init.cpp b/src/wallet/init.cpp index 06f9c730c0..6c5522e4bc 100644 --- a/src/wallet/init.cpp +++ b/src/wallet/init.cpp @@ -18,7 +18,7 @@ class WalletInit : public WalletInitInterface { public: //! Return the wallets help message. - std::string GetHelpString(bool showDebug) const override; + void AddWalletOptions() const override; //! Wallets parameter interaction bool ParameterInteraction() const override; @@ -49,46 +49,38 @@ public: const WalletInitInterface& g_wallet_init_interface = WalletInit(); -std::string WalletInit::GetHelpString(bool showDebug) const +void WalletInit::AddWalletOptions() const { - std::string strUsage = HelpMessageGroup(_("Wallet options:")); - strUsage += HelpMessageOpt("-addresstype", strprintf("What type of addresses to use (\"legacy\", \"p2sh-segwit\", or \"bech32\", default: \"%s\")", FormatOutputType(DEFAULT_ADDRESS_TYPE))); - strUsage += HelpMessageOpt("-changetype", "What type of change to use (\"legacy\", \"p2sh-segwit\", or \"bech32\"). Default is same as -addresstype, except when -addresstype=p2sh-segwit a native segwit output is used when sending to a native segwit address)"); - strUsage += HelpMessageOpt("-disablewallet", _("Do not load the wallet and disable wallet RPC calls")); - strUsage += HelpMessageOpt("-discardfee=<amt>", strprintf(_("The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). " + gArgs.AddArg("-addresstype", strprintf("What type of addresses to use (\"legacy\", \"p2sh-segwit\", or \"bech32\", default: \"%s\")", FormatOutputType(DEFAULT_ADDRESS_TYPE)), false, OptionsCategory::WALLET); + gArgs.AddArg("-changetype", "What type of change to use (\"legacy\", \"p2sh-segwit\", or \"bech32\"). Default is same as -addresstype, except when -addresstype=p2sh-segwit a native segwit output is used when sending to a native segwit address)", false, OptionsCategory::WALLET); + gArgs.AddArg("-disablewallet", _("Do not load the wallet and disable wallet RPC calls"), false, OptionsCategory::WALLET); + gArgs.AddArg("-discardfee=<amt>", strprintf(_("The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). " "Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target"), - CURRENCY_UNIT, FormatMoney(DEFAULT_DISCARD_FEE))); - strUsage += HelpMessageOpt("-fallbackfee=<amt>", strprintf(_("A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)"), - CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE))); - strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), DEFAULT_KEYPOOL_SIZE)); - strUsage += HelpMessageOpt("-mintxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)"), - CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MINFEE))); - strUsage += HelpMessageOpt("-paytxfee=<amt>", strprintf(_("Fee (in %s/kB) to add to transactions you send (default: %s)"), - CURRENCY_UNIT, FormatMoney(CFeeRate{DEFAULT_PAY_TX_FEE}.GetFeePerK()))); - strUsage += HelpMessageOpt("-rescan", _("Rescan the block chain for missing wallet transactions on startup")); - strUsage += HelpMessageOpt("-salvagewallet", _("Attempt to recover private keys from a corrupt wallet on startup")); - strUsage += HelpMessageOpt("-spendzeroconfchange", strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), DEFAULT_SPEND_ZEROCONF_CHANGE)); - strUsage += HelpMessageOpt("-txconfirmtarget=<n>", strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), DEFAULT_TX_CONFIRM_TARGET)); - strUsage += HelpMessageOpt("-upgradewallet", _("Upgrade wallet to latest format on startup")); - strUsage += HelpMessageOpt("-wallet=<path>", _("Specify wallet database path. Can be specified multiple times to load multiple wallets. Path is interpreted relative to <walletdir> if it is not absolute, and will be created if it does not exist (as a directory containing a wallet.dat file and log files). For backwards compatibility this will also accept names of existing data files in <walletdir>.)")); - strUsage += HelpMessageOpt("-walletbroadcast", _("Make the wallet broadcast transactions") + " " + strprintf(_("(default: %u)"), DEFAULT_WALLETBROADCAST)); - strUsage += HelpMessageOpt("-walletdir=<dir>", _("Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>)")); - strUsage += HelpMessageOpt("-walletnotify=<cmd>", _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)")); - strUsage += HelpMessageOpt("-walletrbf", strprintf(_("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)"), DEFAULT_WALLET_RBF)); - strUsage += HelpMessageOpt("-zapwallettxes=<mode>", _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") + - " " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)")); - - if (showDebug) - { - strUsage += HelpMessageGroup(_("Wallet debugging/testing options:")); - - strUsage += HelpMessageOpt("-dblogsize=<n>", strprintf("Flush wallet database activity from memory to disk log every <n> megabytes (default: %u)", DEFAULT_WALLET_DBLOGSIZE)); - strUsage += HelpMessageOpt("-flushwallet", strprintf("Run a thread to flush wallet periodically (default: %u)", DEFAULT_FLUSHWALLET)); - strUsage += HelpMessageOpt("-privdb", strprintf("Sets the DB_PRIVATE flag in the wallet db environment (default: %u)", DEFAULT_WALLET_PRIVDB)); - strUsage += HelpMessageOpt("-walletrejectlongchains", strprintf(_("Wallet will not create transactions that violate mempool chain limits (default: %u)"), DEFAULT_WALLET_REJECT_LONG_CHAINS)); - } - - return strUsage; + CURRENCY_UNIT, FormatMoney(DEFAULT_DISCARD_FEE)), false, OptionsCategory::WALLET); + gArgs.AddArg("-fallbackfee=<amt>", strprintf(_("A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)"), + CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE)), false, OptionsCategory::WALLET); + gArgs.AddArg("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), DEFAULT_KEYPOOL_SIZE), false, OptionsCategory::WALLET); + gArgs.AddArg("-mintxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)"), + CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MINFEE)), false, OptionsCategory::WALLET); + gArgs.AddArg("-paytxfee=<amt>", strprintf(_("Fee (in %s/kB) to add to transactions you send (default: %s)"), + CURRENCY_UNIT, FormatMoney(CFeeRate{DEFAULT_PAY_TX_FEE}.GetFeePerK())), false, OptionsCategory::WALLET); + gArgs.AddArg("-rescan", _("Rescan the block chain for missing wallet transactions on startup"), false, OptionsCategory::WALLET); + gArgs.AddArg("-salvagewallet", _("Attempt to recover private keys from a corrupt wallet on startup"), false, OptionsCategory::WALLET); + gArgs.AddArg("-spendzeroconfchange", strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), DEFAULT_SPEND_ZEROCONF_CHANGE), false, OptionsCategory::WALLET); + gArgs.AddArg("-txconfirmtarget=<n>", strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), DEFAULT_TX_CONFIRM_TARGET), false, OptionsCategory::WALLET); + gArgs.AddArg("-upgradewallet", _("Upgrade wallet to latest format on startup"), false, OptionsCategory::WALLET); + gArgs.AddArg("-wallet=<path>", _("Specify wallet database path. Can be specified multiple times to load multiple wallets. Path is interpreted relative to <walletdir> if it is not absolute, and will be created if it does not exist (as a directory containing a wallet.dat file and log files). For backwards compatibility this will also accept names of existing data files in <walletdir>.)"), false, OptionsCategory::WALLET); + gArgs.AddArg("-walletbroadcast", _("Make the wallet broadcast transactions") + " " + strprintf(_("(default: %u)"), DEFAULT_WALLETBROADCAST), false, OptionsCategory::WALLET); + gArgs.AddArg("-walletdir=<dir>", _("Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>)"), false, OptionsCategory::WALLET); + gArgs.AddArg("-walletnotify=<cmd>", _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)"), false, OptionsCategory::WALLET); + gArgs.AddArg("-walletrbf", strprintf(_("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)"), DEFAULT_WALLET_RBF), false, OptionsCategory::WALLET); + gArgs.AddArg("-zapwallettxes=<mode>", _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") + + " " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)"), false, OptionsCategory::WALLET); + + gArgs.AddArg("-dblogsize=<n>", strprintf("Flush wallet database activity from memory to disk log every <n> megabytes (default: %u)", DEFAULT_WALLET_DBLOGSIZE), true, OptionsCategory::WALLET_DEBUG_TEST); + gArgs.AddArg("-flushwallet", strprintf("Run a thread to flush wallet periodically (default: %u)", DEFAULT_FLUSHWALLET), true, OptionsCategory::WALLET_DEBUG_TEST); + gArgs.AddArg("-privdb", strprintf("Sets the DB_PRIVATE flag in the wallet db environment (default: %u)", DEFAULT_WALLET_PRIVDB), true, OptionsCategory::WALLET_DEBUG_TEST); + gArgs.AddArg("-walletrejectlongchains", strprintf(_("Wallet will not create transactions that violate mempool chain limits (default: %u)"), DEFAULT_WALLET_REJECT_LONG_CHAINS), true, OptionsCategory::WALLET_DEBUG_TEST); } bool WalletInit::ParameterInteraction() const |