diff options
Diffstat (limited to 'src/wallet/init.cpp')
| -rw-r--r-- | src/wallet/init.cpp | 66 |
1 files changed, 40 insertions, 26 deletions
diff --git a/src/wallet/init.cpp b/src/wallet/init.cpp index 71e7111b1a..61481e01b6 100644 --- a/src/wallet/init.cpp +++ b/src/wallet/init.cpp @@ -5,6 +5,7 @@ #include <wallet/init.h> +#include <chainparams.h> #include <net.h> #include <util.h> #include <utilmoneystr.h> @@ -16,13 +17,15 @@ std::string GetWalletHelpString(bool showDebug) { std::string strUsage = HelpMessageGroup(_("Wallet options:")); + strUsage += HelpMessageOpt("-addresstype", strprintf("What type of addresses to use (\"legacy\", \"p2sh-segwit\", or \"bech32\", default: \"%s\")", FormatOutputType(DEFAULT_ADDRESS_TYPE))); + strUsage += HelpMessageOpt("-changetype", "What type of change to use (\"legacy\", \"p2sh-segwit\", or \"bech32\"). Default is same as -addresstype, except when -addresstype=p2sh-segwit a native segwit output is used when sending to a native segwit address)"); strUsage += HelpMessageOpt("-disablewallet", _("Do not load the wallet and disable wallet RPC calls")); - strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), DEFAULT_KEYPOOL_SIZE)); - strUsage += HelpMessageOpt("-fallbackfee=<amt>", strprintf(_("A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)"), - CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE))); strUsage += HelpMessageOpt("-discardfee=<amt>", strprintf(_("The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). " "Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target"), CURRENCY_UNIT, FormatMoney(DEFAULT_DISCARD_FEE))); + strUsage += HelpMessageOpt("-fallbackfee=<amt>", strprintf(_("A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)"), + CURRENCY_UNIT, FormatMoney(DEFAULT_FALLBACK_FEE))); + strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), DEFAULT_KEYPOOL_SIZE)); strUsage += HelpMessageOpt("-mintxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MINFEE))); strUsage += HelpMessageOpt("-paytxfee=<amt>", strprintf(_("Fee (in %s/kB) to add to transactions you send (default: %s)"), @@ -31,12 +34,12 @@ std::string GetWalletHelpString(bool showDebug) strUsage += HelpMessageOpt("-salvagewallet", _("Attempt to recover private keys from a corrupt wallet on startup")); strUsage += HelpMessageOpt("-spendzeroconfchange", strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), DEFAULT_SPEND_ZEROCONF_CHANGE)); strUsage += HelpMessageOpt("-txconfirmtarget=<n>", strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), DEFAULT_TX_CONFIRM_TARGET)); - strUsage += HelpMessageOpt("-walletrbf", strprintf(_("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)"), DEFAULT_WALLET_RBF)); strUsage += HelpMessageOpt("-upgradewallet", _("Upgrade wallet to latest format on startup")); - strUsage += HelpMessageOpt("-wallet=<file>", _("Specify wallet file (within data directory)") + " " + strprintf(_("(default: %s)"), DEFAULT_WALLET_DAT)); + strUsage += HelpMessageOpt("-wallet=<path>", _("Specify wallet database path. Can be specified multiple times to load multiple wallets. Path is interpreted relative to <walletdir> if it is not absolute, and will be created if it does not exist (as a directory containing a wallet.dat file and log files). For backwards compatibility this will also accept names of existing data files in <walletdir>.)")); strUsage += HelpMessageOpt("-walletbroadcast", _("Make the wallet broadcast transactions") + " " + strprintf(_("(default: %u)"), DEFAULT_WALLETBROADCAST)); strUsage += HelpMessageOpt("-walletdir=<dir>", _("Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>)")); strUsage += HelpMessageOpt("-walletnotify=<cmd>", _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)")); + strUsage += HelpMessageOpt("-walletrbf", strprintf(_("Send transactions with full-RBF opt-in enabled (RPC only, default: %u)"), DEFAULT_WALLET_RBF)); strUsage += HelpMessageOpt("-zapwallettxes=<mode>", _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") + " " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)")); @@ -63,7 +66,7 @@ bool WalletParameterInteraction() return true; } - gArgs.SoftSetArg("-wallet", DEFAULT_WALLET_DAT); + gArgs.SoftSetArg("-wallet", ""); const bool is_multiwallet = gArgs.GetArgs("-wallet").size() > 1; if (gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY) && gArgs.SoftSetBoolArg("-walletbroadcast", false)) { @@ -121,6 +124,8 @@ bool WalletParameterInteraction() _("This is the minimum transaction fee you pay on every transaction.")); CWallet::minTxFee = CFeeRate(n); } + + g_wallet_allow_fallback_fee = Params().IsFallbackFeeEnabled(); if (gArgs.IsArgSet("-fallbackfee")) { CAmount nFeePerK = 0; @@ -130,6 +135,7 @@ bool WalletParameterInteraction() InitWarning(AmountHighWarn("-fallbackfee") + " " + _("This is the transaction fee you may pay when fee estimates are not available.")); CWallet::fallbackFee = CFeeRate(nFeePerK); + g_wallet_allow_fallback_fee = nFeePerK != 0; //disable fallback fee in case value was set to 0, enable if non-null value } if (gArgs.IsArgSet("-discardfee")) { @@ -193,11 +199,15 @@ bool VerifyWallets() return true; } - if (gArgs.IsArgSet("-walletdir") && !fs::is_directory(GetWalletDir())) { - if (fs::exists(fs::system_complete(gArgs.GetArg("-walletdir", "")))) { - return InitError(strprintf(_("Specified -walletdir \"%s\" is not a directory"), gArgs.GetArg("-walletdir", "").c_str())); + if (gArgs.IsArgSet("-walletdir")) { + fs::path wallet_dir = gArgs.GetArg("-walletdir", ""); + if (!fs::exists(wallet_dir)) { + return InitError(strprintf(_("Specified -walletdir \"%s\" does not exist"), wallet_dir.string())); + } else if (!fs::is_directory(wallet_dir)) { + return InitError(strprintf(_("Specified -walletdir \"%s\" is not a directory"), wallet_dir.string())); + } else if (!wallet_dir.is_absolute()) { + return InitError(strprintf(_("Specified -walletdir \"%s\" is a relative path"), wallet_dir.string())); } - return InitError(strprintf(_("Specified -walletdir \"%s\" does not exist"), gArgs.GetArg("-walletdir", "").c_str())); } LogPrintf("Using wallet directory %s\n", GetWalletDir().string()); @@ -208,18 +218,22 @@ bool VerifyWallets() std::set<fs::path> wallet_paths; for (const std::string& walletFile : gArgs.GetArgs("-wallet")) { - if (boost::filesystem::path(walletFile).filename() != walletFile) { - return InitError(strprintf(_("Error loading wallet %s. -wallet parameter must only specify a filename (not a path)."), walletFile)); - } - - if (SanitizeString(walletFile, SAFE_CHARS_FILENAME) != walletFile) { - return InitError(strprintf(_("Error loading wallet %s. Invalid characters in -wallet filename."), walletFile)); - } - + // Do some checking on wallet path. It should be either a: + // + // 1. Path where a directory can be created. + // 2. Path to an existing directory. + // 3. Path to a symlink to a directory. + // 4. For backwards compatibility, the name of a data file in -walletdir. fs::path wallet_path = fs::absolute(walletFile, GetWalletDir()); - - if (fs::exists(wallet_path) && (!fs::is_regular_file(wallet_path) || fs::is_symlink(wallet_path))) { - return InitError(strprintf(_("Error loading wallet %s. -wallet filename must be a regular file."), walletFile)); + fs::file_type path_type = fs::symlink_status(wallet_path).type(); + if (!(path_type == fs::file_not_found || path_type == fs::directory_file || + (path_type == fs::symlink_file && fs::is_directory(wallet_path)) || + (path_type == fs::regular_file && fs::path(walletFile).filename() == walletFile))) { + return InitError(strprintf( + _("Invalid -wallet path '%s'. -wallet path should point to a directory where wallet.dat and " + "database/log.?????????? files can be stored, a location where such a directory could be created, " + "or (for backwards compatibility) the name of an existing data file in -walletdir (%s)"), + walletFile, GetWalletDir())); } if (!wallet_paths.insert(wallet_path).second) { @@ -227,21 +241,21 @@ bool VerifyWallets() } std::string strError; - if (!CWalletDB::VerifyEnvironment(walletFile, GetWalletDir().string(), strError)) { + if (!CWalletDB::VerifyEnvironment(wallet_path, strError)) { return InitError(strError); } if (gArgs.GetBoolArg("-salvagewallet", false)) { // Recover readable keypairs: - CWallet dummyWallet; + CWallet dummyWallet("dummy", CWalletDBWrapper::CreateDummy()); std::string backup_filename; - if (!CWalletDB::Recover(walletFile, (void *)&dummyWallet, CWalletDB::RecoverKeysOnlyFilter, backup_filename)) { + if (!CWalletDB::Recover(wallet_path, (void *)&dummyWallet, CWalletDB::RecoverKeysOnlyFilter, backup_filename)) { return false; } } std::string strWarning; - bool dbV = CWalletDB::VerifyDatabaseFile(walletFile, GetWalletDir().string(), strWarning, strError); + bool dbV = CWalletDB::VerifyDatabaseFile(wallet_path, strWarning, strError); if (!strWarning.empty()) { InitWarning(strWarning); } @@ -262,7 +276,7 @@ bool OpenWallets() } for (const std::string& walletFile : gArgs.GetArgs("-wallet")) { - CWallet * const pwallet = CWallet::CreateWalletFromFile(walletFile); + CWallet * const pwallet = CWallet::CreateWalletFromFile(walletFile, fs::absolute(walletFile, GetWalletDir())); if (!pwallet) { return false; } |