diff options
Diffstat (limited to 'src/rpc/mining.cpp')
-rw-r--r-- | src/rpc/mining.cpp | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/src/rpc/mining.cpp b/src/rpc/mining.cpp index e4b38efe07..b552528951 100644 --- a/src/rpc/mining.cpp +++ b/src/rpc/mining.cpp @@ -17,7 +17,6 @@ #include <net.h> #include <node/context.h> #include <node/miner.h> -#include <policy/fees.h> #include <pow.h> #include <rpc/blockchain.h> #include <rpc/mining.h> @@ -30,7 +29,6 @@ #include <shutdown.h> #include <txmempool.h> #include <univalue.h> -#include <util/fees.h> #include <util/strencodings.h> #include <util/string.h> #include <util/system.h> @@ -1054,201 +1052,6 @@ static RPCHelpMan submitheader() }; } -static RPCHelpMan estimatesmartfee() -{ - return RPCHelpMan{"estimatesmartfee", - "\nEstimates the approximate fee per kilobyte needed for a transaction to begin\n" - "confirmation within conf_target blocks if possible and return the number of blocks\n" - "for which the estimate is valid. Uses virtual transaction size as defined\n" - "in BIP 141 (witness data is discounted).\n", - { - {"conf_target", RPCArg::Type::NUM, RPCArg::Optional::NO, "Confirmation target in blocks (1 - 1008)"}, - {"estimate_mode", RPCArg::Type::STR, RPCArg::Default{"conservative"}, "The fee estimate mode.\n" - " Whether to return a more conservative estimate which also satisfies\n" - " a longer history. A conservative estimate potentially returns a\n" - " higher feerate and is more likely to be sufficient for the desired\n" - " target, but is not as responsive to short term drops in the\n" - " prevailing fee market. Must be one of (case insensitive):\n" - "\"" + FeeModes("\"\n\"") + "\""}, - }, - RPCResult{ - RPCResult::Type::OBJ, "", "", - { - {RPCResult::Type::NUM, "feerate", /*optional=*/true, "estimate fee rate in " + CURRENCY_UNIT + "/kvB (only present if no errors were encountered)"}, - {RPCResult::Type::ARR, "errors", /*optional=*/true, "Errors encountered during processing (if there are any)", - { - {RPCResult::Type::STR, "", "error"}, - }}, - {RPCResult::Type::NUM, "blocks", "block number where estimate was found\n" - "The request target will be clamped between 2 and the highest target\n" - "fee estimation is able to return based on how long it has been running.\n" - "An error is returned if not enough transactions and blocks\n" - "have been observed to make an estimate for any number of blocks."}, - }}, - RPCExamples{ - HelpExampleCli("estimatesmartfee", "6") + - HelpExampleRpc("estimatesmartfee", "6") - }, - [&](const RPCHelpMan& self, const JSONRPCRequest& request) -> UniValue -{ - RPCTypeCheck(request.params, {UniValue::VNUM, UniValue::VSTR}); - RPCTypeCheckArgument(request.params[0], UniValue::VNUM); - - CBlockPolicyEstimator& fee_estimator = EnsureAnyFeeEstimator(request.context); - const NodeContext& node = EnsureAnyNodeContext(request.context); - const CTxMemPool& mempool = EnsureMemPool(node); - - unsigned int max_target = fee_estimator.HighestTargetTracked(FeeEstimateHorizon::LONG_HALFLIFE); - unsigned int conf_target = ParseConfirmTarget(request.params[0], max_target); - bool conservative = true; - if (!request.params[1].isNull()) { - FeeEstimateMode fee_mode; - if (!FeeModeFromString(request.params[1].get_str(), fee_mode)) { - throw JSONRPCError(RPC_INVALID_PARAMETER, InvalidEstimateModeErrorMessage()); - } - if (fee_mode == FeeEstimateMode::ECONOMICAL) conservative = false; - } - - UniValue result(UniValue::VOBJ); - UniValue errors(UniValue::VARR); - FeeCalculation feeCalc; - CFeeRate feeRate{fee_estimator.estimateSmartFee(conf_target, &feeCalc, conservative)}; - if (feeRate != CFeeRate(0)) { - CFeeRate min_mempool_feerate{mempool.GetMinFee(gArgs.GetIntArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000)}; - CFeeRate min_relay_feerate{::minRelayTxFee}; - feeRate = std::max({feeRate, min_mempool_feerate, min_relay_feerate}); - result.pushKV("feerate", ValueFromAmount(feeRate.GetFeePerK())); - } else { - errors.push_back("Insufficient data or no feerate found"); - result.pushKV("errors", errors); - } - result.pushKV("blocks", feeCalc.returnedTarget); - return result; -}, - }; -} - -static RPCHelpMan estimaterawfee() -{ - return RPCHelpMan{"estimaterawfee", - "\nWARNING: This interface is unstable and may disappear or change!\n" - "\nWARNING: This is an advanced API call that is tightly coupled to the specific\n" - " implementation of fee estimation. The parameters it can be called with\n" - " and the results it returns will change if the internal implementation changes.\n" - "\nEstimates the approximate fee per kilobyte needed for a transaction to begin\n" - "confirmation within conf_target blocks if possible. Uses virtual transaction size as\n" - "defined in BIP 141 (witness data is discounted).\n", - { - {"conf_target", RPCArg::Type::NUM, RPCArg::Optional::NO, "Confirmation target in blocks (1 - 1008)"}, - {"threshold", RPCArg::Type::NUM, RPCArg::Default{0.95}, "The proportion of transactions in a given feerate range that must have been\n" - " confirmed within conf_target in order to consider those feerates as high enough and proceed to check\n" - " lower buckets."}, - }, - RPCResult{ - RPCResult::Type::OBJ, "", "Results are returned for any horizon which tracks blocks up to the confirmation target", - { - {RPCResult::Type::OBJ, "short", /*optional=*/true, "estimate for short time horizon", - { - {RPCResult::Type::NUM, "feerate", /*optional=*/true, "estimate fee rate in " + CURRENCY_UNIT + "/kvB"}, - {RPCResult::Type::NUM, "decay", "exponential decay (per block) for historical moving average of confirmation data"}, - {RPCResult::Type::NUM, "scale", "The resolution of confirmation targets at this time horizon"}, - {RPCResult::Type::OBJ, "pass", /*optional=*/true, "information about the lowest range of feerates to succeed in meeting the threshold", - { - {RPCResult::Type::NUM, "startrange", "start of feerate range"}, - {RPCResult::Type::NUM, "endrange", "end of feerate range"}, - {RPCResult::Type::NUM, "withintarget", "number of txs over history horizon in the feerate range that were confirmed within target"}, - {RPCResult::Type::NUM, "totalconfirmed", "number of txs over history horizon in the feerate range that were confirmed at any point"}, - {RPCResult::Type::NUM, "inmempool", "current number of txs in mempool in the feerate range unconfirmed for at least target blocks"}, - {RPCResult::Type::NUM, "leftmempool", "number of txs over history horizon in the feerate range that left mempool unconfirmed after target"}, - }}, - {RPCResult::Type::OBJ, "fail", /*optional=*/true, "information about the highest range of feerates to fail to meet the threshold", - { - {RPCResult::Type::ELISION, "", ""}, - }}, - {RPCResult::Type::ARR, "errors", /*optional=*/true, "Errors encountered during processing (if there are any)", - { - {RPCResult::Type::STR, "error", ""}, - }}, - }}, - {RPCResult::Type::OBJ, "medium", /*optional=*/true, "estimate for medium time horizon", - { - {RPCResult::Type::ELISION, "", ""}, - }}, - {RPCResult::Type::OBJ, "long", /*optional=*/true, "estimate for long time horizon", - { - {RPCResult::Type::ELISION, "", ""}, - }}, - }}, - RPCExamples{ - HelpExampleCli("estimaterawfee", "6 0.9") - }, - [&](const RPCHelpMan& self, const JSONRPCRequest& request) -> UniValue -{ - RPCTypeCheck(request.params, {UniValue::VNUM, UniValue::VNUM}, true); - RPCTypeCheckArgument(request.params[0], UniValue::VNUM); - - CBlockPolicyEstimator& fee_estimator = EnsureAnyFeeEstimator(request.context); - - unsigned int max_target = fee_estimator.HighestTargetTracked(FeeEstimateHorizon::LONG_HALFLIFE); - unsigned int conf_target = ParseConfirmTarget(request.params[0], max_target); - double threshold = 0.95; - if (!request.params[1].isNull()) { - threshold = request.params[1].get_real(); - } - if (threshold < 0 || threshold > 1) { - throw JSONRPCError(RPC_INVALID_PARAMETER, "Invalid threshold"); - } - - UniValue result(UniValue::VOBJ); - - for (const FeeEstimateHorizon horizon : ALL_FEE_ESTIMATE_HORIZONS) { - CFeeRate feeRate; - EstimationResult buckets; - - // Only output results for horizons which track the target - if (conf_target > fee_estimator.HighestTargetTracked(horizon)) continue; - - feeRate = fee_estimator.estimateRawFee(conf_target, threshold, horizon, &buckets); - UniValue horizon_result(UniValue::VOBJ); - UniValue errors(UniValue::VARR); - UniValue passbucket(UniValue::VOBJ); - passbucket.pushKV("startrange", round(buckets.pass.start)); - passbucket.pushKV("endrange", round(buckets.pass.end)); - passbucket.pushKV("withintarget", round(buckets.pass.withinTarget * 100.0) / 100.0); - passbucket.pushKV("totalconfirmed", round(buckets.pass.totalConfirmed * 100.0) / 100.0); - passbucket.pushKV("inmempool", round(buckets.pass.inMempool * 100.0) / 100.0); - passbucket.pushKV("leftmempool", round(buckets.pass.leftMempool * 100.0) / 100.0); - UniValue failbucket(UniValue::VOBJ); - failbucket.pushKV("startrange", round(buckets.fail.start)); - failbucket.pushKV("endrange", round(buckets.fail.end)); - failbucket.pushKV("withintarget", round(buckets.fail.withinTarget * 100.0) / 100.0); - failbucket.pushKV("totalconfirmed", round(buckets.fail.totalConfirmed * 100.0) / 100.0); - failbucket.pushKV("inmempool", round(buckets.fail.inMempool * 100.0) / 100.0); - failbucket.pushKV("leftmempool", round(buckets.fail.leftMempool * 100.0) / 100.0); - - // CFeeRate(0) is used to indicate error as a return value from estimateRawFee - if (feeRate != CFeeRate(0)) { - horizon_result.pushKV("feerate", ValueFromAmount(feeRate.GetFeePerK())); - horizon_result.pushKV("decay", buckets.decay); - horizon_result.pushKV("scale", (int)buckets.scale); - horizon_result.pushKV("pass", passbucket); - // buckets.fail.start == -1 indicates that all buckets passed, there is no fail bucket to output - if (buckets.fail.start != -1) horizon_result.pushKV("fail", failbucket); - } else { - // Output only information that is still meaningful in the event of error - horizon_result.pushKV("decay", buckets.decay); - horizon_result.pushKV("scale", (int)buckets.scale); - horizon_result.pushKV("fail", failbucket); - errors.push_back("Insufficient data or no feerate found which meets threshold"); - horizon_result.pushKV("errors",errors); - } - result.pushKV(StringForFeeEstimateHorizon(horizon), horizon_result); - } - return result; -}, - }; -} - void RegisterMiningRPCCommands(CRPCTable& t) { static const CRPCCommand commands[]{ @@ -1262,10 +1065,6 @@ void RegisterMiningRPCCommands(CRPCTable& t) {"hidden", &generatetoaddress}, {"hidden", &generatetodescriptor}, {"hidden", &generateblock}, - - {"util", &estimatesmartfee}, - - {"hidden", &estimaterawfee}, {"hidden", &generate}, }; for (const auto& c : commands) { |