diff options
Diffstat (limited to 'src/qt/locale/bitcoin_zh_TW.ts')
-rw-r--r-- | src/qt/locale/bitcoin_zh_TW.ts | 46 |
1 files changed, 37 insertions, 9 deletions
diff --git a/src/qt/locale/bitcoin_zh_TW.ts b/src/qt/locale/bitcoin_zh_TW.ts index bdcf966297..bd0533a83e 100644 --- a/src/qt/locale/bitcoin_zh_TW.ts +++ b/src/qt/locale/bitcoin_zh_TW.ts @@ -330,6 +330,10 @@ <translation>按一下就又會使用網路。</translation> </message> <message> + <source>Syncing Headers (%1%)...</source> + <translation>正在同步前導資料(%1%)中...</translation> + </message> + <message> <source>Reindexing blocks on disk...</source> <translation>正在為磁碟裡的區塊重建索引...</translation> </message> @@ -441,10 +445,6 @@ <source>Processing blocks on disk...</source> <translation>正在處理磁碟裡的區塊資料...</translation> </message> - <message> - <source>No block source available...</source> - <translation>沒有可用的區塊來源...</translation> - </message> <message numerus="yes"> <source>Processed %n block(s) of transaction history.</source> <translation><numerusform>已經處理了 %n 個區塊的交易紀錄。</numerusform></translation> @@ -486,6 +486,10 @@ <translation>%1 客戶端軟體</translation> </message> <message> + <source>Connecting to peers...</source> + <translation>正在跟其他節點連線中...</translation> + </message> + <message> <source>Catching up...</source> <translation>正在趕進度...</translation> </message> @@ -2201,6 +2205,14 @@ <translation>警告: 不明的找零位址</translation> </message> <message> + <source>Confirm custom change address</source> + <translation>自定找零位址確認</translation> + </message> + <message> + <source>The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure?</source> + <translation>選擇的找零位址並不屬於這個錢包。部份或是全部的錢會被送到這個位址去。你確定嗎?</translation> + </message> + <message> <source>(no label)</source> <translation>(無標記)</translation> </message> @@ -3019,10 +3031,6 @@ <translation>修剪模式:錢包的最後同步狀態是在被修剪掉的區塊資料中。你需要用 -reindex 參數執行(會重新下載整個區塊鏈)</translation> </message> <message> - <source>Reduce storage requirements by pruning (deleting) old blocks. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, >%u = target size in MiB to use for block files)</source> - <translation>修剪(刪除)掉老舊區塊來減少需要的儲存空間。這種模式會關閉錢包功能,並且和 -txindex 及 -rescan 參數不相容。警告: 從這種模式還原會需要重新下載一整個區塊鏈。(預設值: 0 表示不修剪區塊,>%u 表示為區塊檔案的目標大小,單位是百萬位元組 MiB)</translation> - </message> - <message> <source>Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again.</source> <translation>在修剪模式下沒辦法重新掃描區塊鏈。你需要配合使用 -reindex 參數來重新下載整個區塊鏈。</translation> </message> @@ -3087,6 +3095,14 @@ <translation>當錢包有交易改變時要執行的指令(指令中的 %s 會被取代成交易識別碼)</translation> </message> <message> + <source>Extra transactions to keep in memory for compact block reconstructions (default: %u)</source> + <translation>為了將摘要區塊完整回組而額外保留在記憶體中的交易數量(預設值: %u)</translation> + </message> + <message> + <source>If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)</source> + <translation>假設已經在區塊鏈中的區塊以及其先前的區塊都合法,因此對它們略過指令碼驗證(0 表示一律要驗證,預設值: %s, 測試網路: %s)</translation> + </message> + <message> <source>Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)</source> <translation>跟其他節點的時間差最高可接受的中位數值。本機所認為的時間可能會被其他節點影響,往前或往後在這個值之內。(預設值: %u 秒)</translation> </message> @@ -3103,6 +3119,14 @@ <translation>如果你覺得 %s 有用,可以幫助我們。關於這個軟體的更多資訊請見 %s。</translation> </message> <message> + <source>Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)</source> + <translation>修剪(刪除)掉老舊區塊以降低需要的儲存空間。這樣會增加一個 RPC 指令 pruneblockchain,可以使用它來刪除指定的區塊;也可以指定目標儲存空間大小,以啟用對老舊區塊的自動修剪功能。這個模式跟 -txindex 和 -rescan 參數不相容。警告: 還原回不修剪模式會需要重新下載一整個區塊鏈。(預設值: 0 表示不修剪區塊,1 表示允許使用 RPC 指令做修剪,>%u 的值表示為區塊資料的目標大小,單位是百萬位元組,MiB)</translation> + </message> + <message> + <source>Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)</source> + <translation>設定製造區塊時,所要包含交易每千位元組的最低手續費(單位是 %s)。(預設值: %s)</translation> + </message> + <message> <source>Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)</source> <translation>設定指令碼驗證的執行緒數目 (%u 到 %d,0 表示程式自動決定,小於 0 表示保留處理器核心不用的數目,預設值: %d)</translation> </message> @@ -3123,6 +3147,10 @@ <translation>是否要使用「通用即插即用」協定(UPnP),來設定聽候連線的通訊埠的對應(預設值: 當有聽候連線且沒有指定 -proxy 參數時為 1)</translation> </message> <message> + <source>Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times</source> + <translation>JSON-RPC 連線要用的使用者名稱和雜湊密碼。<userpw> 的格式是:<使用者名稱>:<調味值>$<雜湊值>。在 share/rpcuser 目錄下有一個示範的 python 程式。之後客戶端程式就可以用這對參數正常連線:rpcuser=<使用者名稱> 和 rpcpassword=<密碼>。這個選項可以給很多次。</translation> + </message> + <message> <source>Wallet will not create transactions that violate mempool chain limits (default: %u)</source> <translation>錢包軟體不會產生違反記憶池交易鏈限制的交易(預設值: %u)</translation> </message> @@ -3368,7 +3396,7 @@ </message> <message> <source>Use the test chain</source> - <translation>使用測試鏈</translation> + <translation>使用測試區塊鏈</translation> </message> <message> <source>User Agent comment (%s) contains unsafe characters.</source> |