diff options
Diffstat (limited to 'src/qt/locale/bitcoin_fa.ts')
| -rw-r--r-- | src/qt/locale/bitcoin_fa.ts | 1038 |
1 files changed, 1029 insertions, 9 deletions
diff --git a/src/qt/locale/bitcoin_fa.ts b/src/qt/locale/bitcoin_fa.ts index e926a08fae..0f4f4387d8 100644 --- a/src/qt/locale/bitcoin_fa.ts +++ b/src/qt/locale/bitcoin_fa.ts @@ -70,6 +70,12 @@ <translation>اینها آدرس‌های شما برای ارسال وجوه هستند. همیشه قبل از ارسال، مقدار و آدرس گیرنده را بررسی کنید.</translation> </message> <message> + <source>These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses. +Signing is only possible with addresses of the type 'legacy'.</source> + <translation>These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses. +Signing is only possible with addresses of the type 'legacy'.</translation> + </message> + <message> <source>&Copy Address</source> <translation>کپی آدرس</translation> </message> @@ -479,6 +485,22 @@ <translation>به روز</translation> </message> <message> + <source>&Load PSBT from file...</source> + <translation>&Load PSBT from file...</translation> + </message> + <message> + <source>Load Partially Signed Bitcoin Transaction</source> + <translation>Load Partially Signed Bitcoin Transaction</translation> + </message> + <message> + <source>Load PSBT from clipboard...</source> + <translation>Load PSBT from clipboard...</translation> + </message> + <message> + <source>Load Partially Signed Bitcoin Transaction from clipboard</source> + <translation>Load Partially Signed Bitcoin Transaction from clipboard</translation> + </message> + <message> <source>Node window</source> <translation>پنجره گره</translation> </message> @@ -523,6 +545,14 @@ <translation>همه‌ی کیف پول‌ها را ببند</translation> </message> <message> + <source>&Mask values</source> + <translation>&Mask values</translation> + </message> + <message> + <source>Mask the values in the Overview tab</source> + <translation>Mask the values in the Overview tab</translation> + </message> + <message> <source>default wallet</source> <translation>کیف پول پیشفرض</translation> </message> @@ -634,7 +664,11 @@ <source>Original message:</source> <translation>پیام اصلی:</translation> </message> - </context> + <message> + <source>A fatal error occurred. %1 can no longer continue safely and will quit.</source> + <translation>A fatal error occurred. %1 can no longer continue safely and will quit.</translation> + </message> +</context> <context> <name>CoinControlDialog</name> <message> @@ -770,6 +804,10 @@ <translation>اگر هر گیرنده مقداری کمتر آستانه فعلی دریافت کند از این لیبل قرمز می‌شود.</translation> </message> <message> + <source>Can vary +/- %1 satoshi(s) per input.</source> + <translation>Can vary +/- %1 satoshi(s) per input.</translation> + </message> + <message> <source>(no label)</source> <translation>(برچسب ندارد)</translation> </message> @@ -832,10 +870,22 @@ <translation>ساخت کیف پول خالی</translation> </message> <message> + <source>Use descriptors for scriptPubKey management</source> + <translation>Use descriptors for scriptPubKey management</translation> + </message> + <message> + <source>Descriptor Wallet</source> + <translation>Descriptor Wallet</translation> + </message> + <message> <source>Create</source> <translation>ایجاد</translation> </message> - </context> + <message> + <source>Compiled without sqlite support (required for descriptor wallets)</source> + <translation>Compiled without sqlite support (required for descriptor wallets)</translation> + </message> +</context> <context> <name>EditAddressDialog</name> <message> @@ -875,6 +925,10 @@ <translation>آدرس وارد شده "%1" آدرس معتبر بیت کوین نیست.</translation> </message> <message> + <source>Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address.</source> + <translation>Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address.</translation> + </message> + <message> <source>The entered address "%1" is already in the address book with label "%2".</source> <translation>آدرس وارد شده "%1" در حال حاظر در دفترچه آدرس ها موجود است با برچسب "%2" .</translation> </message> @@ -940,6 +994,22 @@ <translation>از آنجا که اولین مرتبه این برنامه اجرا می‌شود، شما می‌توانید محل ذخیره داده‌های %1 را انتخاب نمایید.</translation> </message> <message> + <source>When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched.</source> + <translation>When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched.</translation> + </message> + <message> + <source>Reverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features.</source> + <translation>Reverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features.</translation> + </message> + <message> + <source>This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off.</source> + <translation>This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off.</translation> + </message> + <message> + <source>If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low.</source> + <translation>If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low.</translation> + </message> + <message> <source>Use the default data directory</source> <translation>استفاده کردن از پوشه داده پیشفرض</translation> </message> @@ -952,6 +1022,10 @@ <translation>بیت کوین</translation> </message> <message> + <source>Discard blocks after verification, except most recent %1 GB (prune)</source> + <translation>Discard blocks after verification, except most recent %1 GB (prune)</translation> + </message> + <message> <source>At least %1 GB of data will be stored in this directory, and it will grow over time.</source> <translation>حداقل %1 گیگابایت اطلاعات در این شاخه ذخیره خواهد شد، که به مرور زمان افزایش خواهد یافت.</translation> </message> @@ -960,6 +1034,10 @@ <translation>تقریبا %1 گیگابایت داده در این شاخه ذخیره خواهد شد.</translation> </message> <message> + <source>%1 will download and store a copy of the Bitcoin block chain.</source> + <translation>%1 will download and store a copy of the Bitcoin block chain.</translation> + </message> + <message> <source>The wallet will also be stored in this directory.</source> <translation>کیف پول هم در همین دایرکتوری ذخیره می‌شود.</translation> </message> @@ -979,7 +1057,11 @@ <source>(of %n GB needed)</source> <translation><numerusform>(از %n گیگابایت مورد نیاز)</numerusform><numerusform>(از %n گیگابایت مورد نیاز)</numerusform></translation> </message> - </context> + <message numerus="yes"> + <source>(%n GB needed for full chain)</source> + <translation><numerusform>(%n GB needed for full chain)</numerusform><numerusform>(%n GB needed for full chain)</numerusform></translation> + </message> +</context> <context> <name>ModalOverlay</name> <message> @@ -987,6 +1069,14 @@ <translation>فرم</translation> </message> <message> + <source>Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below.</source> + <translation>Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below.</translation> + </message> + <message> + <source>Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network.</source> + <translation>Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network.</translation> + </message> + <message> <source>Number of blocks left</source> <translation>تعداد بلوک‌های باقیمانده</translation> </message> @@ -1022,10 +1112,22 @@ <source>Esc</source> <translation>خروج</translation> </message> - </context> + <message> + <source>%1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain.</source> + <translation>%1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain.</translation> + </message> + <message> + <source>Unknown. Syncing Headers (%1, %2%)...</source> + <translation>Unknown. Syncing Headers (%1, %2%)...</translation> + </message> +</context> <context> <name>OpenURIDialog</name> <message> + <source>Open bitcoin URI</source> + <translation>Open bitcoin URI</translation> + </message> + <message> <source>URI:</source> <translation>آدرس:</translation> </message> @@ -1044,7 +1146,11 @@ <source>default wallet</source> <translation>کیف پول پیشفرض</translation> </message> - </context> + <message> + <source>Opening Wallet <b>%1</b>...</source> + <translation>Opening Wallet <b>%1</b>...</translation> + </message> +</context> <context> <name>OptionsDialog</name> <message> @@ -1060,15 +1166,47 @@ <translation>اجرای خودکار %1 بعد زمان ورود به سیستم.</translation> </message> <message> + <source>&Start %1 on system login</source> + <translation>&Start %1 on system login</translation> + </message> + <message> <source>Size of &database cache</source> <translation>اندازه کش پایگاه داده.</translation> </message> <message> + <source>Number of script &verification threads</source> + <translation>Number of script &verification threads</translation> + </message> + <message> + <source>IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)</source> + <translation>IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)</translation> + </message> + <message> + <source>Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type.</source> + <translation>Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type.</translation> + </message> + <message> + <source>Hide the icon from the system tray.</source> + <translation>Hide the icon from the system tray.</translation> + </message> + <message> <source>&Hide tray icon</source> <translation>مخفی کردن ایکون </translation> </message> <message> + <source>Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.</source> + <translation>Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.</translation> + </message> + <message> + <source>Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.</source> + <translation>Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.</translation> + </message> + <message> + <source>Open the %1 configuration file from the working directory.</source> + <translation>Open the %1 configuration file from the working directory.</translation> + </message> + <message> <source>Open Configuration File</source> <translation>بازکردن فایل پیکربندی</translation> </message> @@ -1085,14 +1223,30 @@ <translation>شبکه</translation> </message> <message> + <source>Disables some advanced features but all blocks will still be fully validated. Reverting this setting requires re-downloading the entire blockchain. Actual disk usage may be somewhat higher.</source> + <translation>Disables some advanced features but all blocks will still be fully validated. Reverting this setting requires re-downloading the entire blockchain. Actual disk usage may be somewhat higher.</translation> + </message> + <message> + <source>Prune &block storage to</source> + <translation>Prune &block storage to</translation> + </message> + <message> <source>GB</source> <translation>گیگابایت</translation> </message> <message> + <source>Reverting this setting requires re-downloading the entire blockchain.</source> + <translation>Reverting this setting requires re-downloading the entire blockchain.</translation> + </message> + <message> <source>MiB</source> <translation>MiB</translation> </message> <message> + <source>(0 = auto, <0 = leave that many cores free)</source> + <translation>(0 = auto, <0 = leave that many cores free)</translation> + </message> + <message> <source>W&allet</source> <translation>کیف پول</translation> </message> @@ -1105,6 +1259,14 @@ <translation>فعال کردن قابلیت سکه و کنترل</translation> </message> <message> + <source>If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.</source> + <translation>If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.</translation> + </message> + <message> + <source>&Spend unconfirmed change</source> + <translation>&Spend unconfirmed change</translation> + </message> + <message> <source>Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.</source> <translation>باز کردن خودکار درگاه شبکهٔ بیت‌کوین روی روترها. تنها زمانی کار می‌کند که روتر از پروتکل UPnP پشتیبانی کند و این پروتکل فعال باشد.</translation> </message> @@ -1121,6 +1283,14 @@ <translation>اجازه دادن به ارتباطات ورودی</translation> </message> <message> + <source>Connect to the Bitcoin network through a SOCKS5 proxy.</source> + <translation>Connect to the Bitcoin network through a SOCKS5 proxy.</translation> + </message> + <message> + <source>&Connect through SOCKS5 proxy (default proxy):</source> + <translation>&Connect through SOCKS5 proxy (default proxy):</translation> + </message> + <message> <source>Proxy &IP:</source> <translation>پراکسی و آی‌پی:</translation> </message> @@ -1133,6 +1303,10 @@ <translation>پورت پراکسی (مثال ۹۰۵۰)</translation> </message> <message> + <source>Used for reaching peers via:</source> + <translation>Used for reaching peers via:</translation> + </message> + <message> <source>IPv4</source> <translation>IPv4</translation> </message> @@ -1169,6 +1343,10 @@ <translation>زبان واسط کاربری:</translation> </message> <message> + <source>The user interface language can be set here. This setting will take effect after restarting %1.</source> + <translation>The user interface language can be set here. This setting will take effect after restarting %1.</translation> + </message> + <message> <source>&Unit to show amounts in:</source> <translation>واحد نمایشگر مقادیر:</translation> </message> @@ -1181,10 +1359,22 @@ <translation>که امکانات کنترل کوین‌ها نشان داده شود یا نه.</translation> </message> <message> + <source>Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services.</source> + <translation>Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services.</translation> + </message> + <message> + <source>Use separate SOCKS&5 proxy to reach peers via Tor onion services:</source> + <translation>Use separate SOCKS&5 proxy to reach peers via Tor onion services:</translation> + </message> + <message> <source>&Third party transaction URLs</source> <translation>URLهای تراکنش شخص ثالث</translation> </message> <message> + <source>Options set in this dialog are overridden by the command line or in the configuration file:</source> + <translation>Options set in this dialog are overridden by the command line or in the configuration file:</translation> + </message> + <message> <source>&OK</source> <translation>تایید</translation> </message> @@ -1217,6 +1407,10 @@ <translation>تنظیمات پیکربندی</translation> </message> <message> + <source>The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file.</source> + <translation>The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file.</translation> + </message> + <message> <source>Error</source> <translation>خطا</translation> </message> @@ -1303,7 +1497,15 @@ <source>Mined balance in watch-only addresses that has not yet matured</source> <translation>موجودی استخراج شده در آدرس های فقط قابل مشاهده هنوز کامل نشده است</translation> </message> - </context> + <message> + <source>Current total balance in watch-only addresses</source> + <translation>Current total balance in watch-only addresses</translation> + </message> + <message> + <source>Privacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values.</source> + <translation>Privacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values.</translation> + </message> +</context> <context> <name>PSBTOperationsDialog</name> <message> @@ -1311,6 +1513,14 @@ <translation>تگفتگو</translation> </message> <message> + <source>Sign Tx</source> + <translation>Sign Tx</translation> + </message> + <message> + <source>Broadcast Tx</source> + <translation>Broadcast Tx</translation> + </message> + <message> <source>Copy to Clipboard</source> <translation>کپی کردن</translation> </message> @@ -1323,14 +1533,66 @@ <translation>بستن</translation> </message> <message> + <source>Failed to load transaction: %1</source> + <translation>Failed to load transaction: %1</translation> + </message> + <message> + <source>Failed to sign transaction: %1</source> + <translation>Failed to sign transaction: %1</translation> + </message> + <message> + <source>Could not sign any more inputs.</source> + <translation>Could not sign any more inputs.</translation> + </message> + <message> + <source>Signed %1 inputs, but more signatures are still required.</source> + <translation>Signed %1 inputs, but more signatures are still required.</translation> + </message> + <message> + <source>Signed transaction successfully. Transaction is ready to broadcast.</source> + <translation>Signed transaction successfully. Transaction is ready to broadcast.</translation> + </message> + <message> <source>Unknown error processing transaction.</source> <translation>مشکل نامشخصی در پردازش عملیات رخ داده.</translation> </message> <message> + <source>Transaction broadcast successfully! Transaction ID: %1</source> + <translation>Transaction broadcast successfully! Transaction ID: %1</translation> + </message> + <message> + <source>Transaction broadcast failed: %1</source> + <translation>Transaction broadcast failed: %1</translation> + </message> + <message> + <source>PSBT copied to clipboard.</source> + <translation>PSBT copied to clipboard.</translation> + </message> + <message> <source>Save Transaction Data</source> <translation>ذخیره اطلاعات عملیات</translation> </message> <message> + <source>Partially Signed Transaction (Binary) (*.psbt)</source> + <translation>Partially Signed Transaction (Binary) (*.psbt)</translation> + </message> + <message> + <source>PSBT saved to disk.</source> + <translation>PSBT saved to disk.</translation> + </message> + <message> + <source> * Sends %1 to %2</source> + <translation> * Sends %1 to %2</translation> + </message> + <message> + <source>Unable to calculate transaction fee or total transaction amount.</source> + <translation>Unable to calculate transaction fee or total transaction amount.</translation> + </message> + <message> + <source>Pays transaction fee: </source> + <translation>Pays transaction fee: </translation> + </message> + <message> <source>Total Amount</source> <translation>میزان کل</translation> </message> @@ -1339,6 +1601,14 @@ <translation>یا</translation> </message> <message> + <source>Transaction has %1 unsigned inputs.</source> + <translation>Transaction has %1 unsigned inputs.</translation> + </message> + <message> + <source>Transaction is missing some information about inputs.</source> + <translation>Transaction is missing some information about inputs.</translation> + </message> + <message> <source>Transaction still needs signature(s).</source> <translation>عملیات هنوز به امضا(ها) نیاز دارد.</translation> </message> @@ -1347,6 +1617,14 @@ <translation>(اما این کیف‌‌پول نمی‌تواند عملیات‌ها را امضا کند.)</translation> </message> <message> + <source>(But this wallet does not have the right keys.)</source> + <translation>(But this wallet does not have the right keys.)</translation> + </message> + <message> + <source>Transaction is fully signed and ready for broadcast.</source> + <translation>Transaction is fully signed and ready for broadcast.</translation> + </message> + <message> <source>Transaction status is unknown.</source> <translation>وضعیت عملیات نامشخص است.</translation> </message> @@ -1366,10 +1644,30 @@ <translation>مدیریت URI</translation> </message> <message> + <source>'bitcoin://' is not a valid URI. Use 'bitcoin:' instead.</source> + <translation>'bitcoin://' is not a valid URI. Use 'bitcoin:' instead.</translation> + </message> + <message> + <source>Cannot process payment request because BIP70 is not supported.</source> + <translation>Cannot process payment request because BIP70 is not supported.</translation> + </message> + <message> + <source>Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored.</source> + <translation>Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored.</translation> + </message> + <message> + <source>If you are receiving this error you should request the merchant provide a BIP21 compatible URI.</source> + <translation>If you are receiving this error you should request the merchant provide a BIP21 compatible URI.</translation> + </message> + <message> <source>Invalid payment address %1</source> <translation>آدرس پرداخت نامعتبر %1</translation> </message> <message> + <source>URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.</source> + <translation>URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.</translation> + </message> + <message> <source>Payment request file handling</source> <translation>درحال پردازش درخواست پرداخت</translation> </message> @@ -1488,10 +1786,18 @@ <translation>خطا: پوشهٔ مشخص شده برای داده‌ها در «%1» وجود ندارد.</translation> </message> <message> + <source>Error: Cannot parse configuration file: %1.</source> + <translation>Error: Cannot parse configuration file: %1.</translation> + </message> + <message> <source>Error: %1</source> <translation>خطا: %1</translation> </message> <message> + <source>Error initializing settings: %1</source> + <translation>Error initializing settings: %1</translation> + </message> + <message> <source>%1 didn't yet exit safely...</source> <translation>%1 به درستی بسته نشد</translation> </message> @@ -1558,10 +1864,18 @@ <translation>پوشه داده Datadir</translation> </message> <message> + <source>To specify a non-default location of the data directory use the '%1' option.</source> + <translation>To specify a non-default location of the data directory use the '%1' option.</translation> + </message> + <message> <source>Blocksdir</source> <translation>فولدر بلاکها</translation> </message> <message> + <source>To specify a non-default location of the blocks directory use the '%1' option.</source> + <translation>To specify a non-default location of the blocks directory use the '%1' option.</translation> + </message> + <message> <source>Startup time</source> <translation>زمان آغاز به کار</translation> </message> @@ -1638,10 +1952,22 @@ <translation>بلاک اولیه</translation> </message> <message> + <source>Synced Headers</source> + <translation>Synced Headers</translation> + </message> + <message> <source>Synced Blocks</source> <translation>بلاک‌های همگام‌سازی شده</translation> </message> <message> + <source>The mapped Autonomous System used for diversifying peer selection.</source> + <translation>The mapped Autonomous System used for diversifying peer selection.</translation> + </message> + <message> + <source>Mapped AS</source> + <translation>Mapped AS</translation> + </message> + <message> <source>User Agent</source> <translation>نماینده کاربر</translation> </message> @@ -1654,6 +1980,10 @@ <translation>ارتفاع فعلی بلوک</translation> </message> <message> + <source>Open the %1 debug log file from the current data directory. This can take a few seconds for large log files.</source> + <translation>Open the %1 debug log file from the current data directory. This can take a few seconds for large log files.</translation> + </message> + <message> <source>Decrease font size</source> <translation>کاهش دادن اندازه فونت</translation> </message> @@ -1662,6 +1992,10 @@ <translation>افزایش دادن اندازه فونت</translation> </message> <message> + <source>Permissions</source> + <translation>Permissions</translation> + </message> + <message> <source>Services</source> <translation>خدمات</translation> </message> @@ -1682,6 +2016,10 @@ <translation>مدت زمان پینگ</translation> </message> <message> + <source>The duration of a currently outstanding ping.</source> + <translation>The duration of a currently outstanding ping.</translation> + </message> + <message> <source>Ping Wait</source> <translation>انتظار پینگ</translation> </message> @@ -1690,6 +2028,10 @@ <translation>حداقل پینگ</translation> </message> <message> + <source>Time Offset</source> + <translation>Time Offset</translation> + </message> + <message> <source>Last block time</source> <translation>زمان آخرین بلوک</translation> </message> @@ -1754,10 +2096,38 @@ <translation>&خارج کردن از بن</translation> </message> <message> + <source>Welcome to the %1 RPC console.</source> + <translation>Welcome to the %1 RPC console.</translation> + </message> + <message> + <source>Use up and down arrows to navigate history, and %1 to clear screen.</source> + <translation>Use up and down arrows to navigate history, and %1 to clear screen.</translation> + </message> + <message> + <source>Type %1 for an overview of available commands.</source> + <translation>Type %1 for an overview of available commands.</translation> + </message> + <message> + <source>For more information on using this console type %1.</source> + <translation>For more information on using this console type %1.</translation> + </message> + <message> + <source>WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command.</source> + <translation>WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command.</translation> + </message> + <message> <source>Network activity disabled</source> <translation>فعالیت شبکه غیر فعال شد</translation> </message> <message> + <source>Executing command without any wallet</source> + <translation>Executing command without any wallet</translation> + </message> + <message> + <source>Executing command using "%1" wallet</source> + <translation>Executing command using "%1" wallet</translation> + </message> + <message> <source>(node id: %1)</source> <translation>(شناسه گره: %1)</translation> </message> @@ -1770,6 +2140,14 @@ <translation>هیچ وقت</translation> </message> <message> + <source>Inbound</source> + <translation>Inbound</translation> + </message> + <message> + <source>Outbound</source> + <translation>Outbound</translation> + </message> + <message> <source>Unknown</source> <translation>ناشناس یا نامعلوم</translation> </message> @@ -1789,10 +2167,34 @@ <translation>پیام:</translation> </message> <message> + <source>An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.</source> + <translation>An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.</translation> + </message> + <message> + <source>An optional label to associate with the new receiving address.</source> + <translation>An optional label to associate with the new receiving address.</translation> + </message> + <message> <source>Use this form to request payments. All fields are <b>optional</b>.</source> <translation>از این فرم استفاده کنید برای درخواست پرداخت ها.تمامی گزینه ها <b>اختیاری</b>هستند.</translation> </message> <message> + <source>An optional amount to request. Leave this empty or zero to not request a specific amount.</source> + <translation>An optional amount to request. Leave this empty or zero to not request a specific amount.</translation> + </message> + <message> + <source>An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request.</source> + <translation>An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request.</translation> + </message> + <message> + <source>An optional message that is attached to the payment request and may be displayed to the sender.</source> + <translation>An optional message that is attached to the payment request and may be displayed to the sender.</translation> + </message> + <message> + <source>&Create new receiving address</source> + <translation>&Create new receiving address</translation> + </message> + <message> <source>Clear all fields of the form.</source> <translation>پاک کردن تمامی گزینه های این فرم</translation> </message> @@ -1801,10 +2203,22 @@ <translation>پاک کردن</translation> </message> <message> + <source>Native segwit addresses (aka Bech32 or BIP-173) reduce your transaction fees later on and offer better protection against typos, but old wallets don't support them. When unchecked, an address compatible with older wallets will be created instead.</source> + <translation>Native segwit addresses (aka Bech32 or BIP-173) reduce your transaction fees later on and offer better protection against typos, but old wallets don't support them. When unchecked, an address compatible with older wallets will be created instead.</translation> + </message> + <message> + <source>Generate native segwit (Bech32) address</source> + <translation>Generate native segwit (Bech32) address</translation> + </message> + <message> <source>Requested payments history</source> <translation>تاریخچه پرداخت های درخواست شده</translation> </message> <message> + <source>Show the selected request (does the same as double clicking an entry)</source> + <translation>Show the selected request (does the same as double clicking an entry)</translation> + </message> + <message> <source>Show</source> <translation>نمایش</translation> </message> @@ -1836,7 +2250,11 @@ <source>Could not unlock wallet.</source> <translation>نمیتوان کیف پول را باز کرد.</translation> </message> - </context> + <message> + <source>Could not generate new %1 address</source> + <translation>Could not generate new %1 address</translation> + </message> +</context> <context> <name>ReceiveRequestDialog</name> <message> @@ -1962,6 +2380,10 @@ <translation>تغییر</translation> </message> <message> + <source>If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.</source> + <translation>If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.</translation> + </message> + <message> <source>Custom change address</source> <translation>تغییر آدرس مخصوص</translation> </message> @@ -1974,6 +2396,10 @@ <translation>انتخاب...</translation> </message> <message> + <source>Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain.</source> + <translation>Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain.</translation> + </message> + <message> <source>Warning: Fee estimation is currently not possible.</source> <translation>هشدار:تخمین کارمزد در حال حاضر امکان پذیر نیست.</translation> </message> @@ -2026,6 +2452,14 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>تنظیمات مخفی کردن کارمزد عملیات</translation> </message> <message> + <source>When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source> + <translation>When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</translation> + </message> + <message> + <source>A too low fee might result in a never confirming transaction (read the tooltip)</source> + <translation>A too low fee might result in a never confirming transaction (read the tooltip)</translation> + </message> + <message> <source>Confirmation time target:</source> <translation>هدف زمانی تایید شدن:</translation> </message> @@ -2034,6 +2468,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>فعال کردن جایگذاری دوباره از کارمزد</translation> </message> <message> + <source>With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk.</source> + <translation>With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk.</translation> + </message> + <message> <source>Clear &All</source> <translation>پاک کردن همه</translation> </message> @@ -2082,18 +2520,50 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>%1(%2 بلاک ها)</translation> </message> <message> + <source>Cr&eate Unsigned</source> + <translation>Cr&eate Unsigned</translation> + </message> + <message> + <source>Creates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.</source> + <translation>Creates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.</translation> + </message> + <message> + <source> from wallet '%1'</source> + <translation> from wallet '%1'</translation> + </message> + <message> + <source>%1 to '%2'</source> + <translation>%1 to '%2'</translation> + </message> + <message> <source>%1 to %2</source> <translation>%1 به %2</translation> </message> <message> + <source>Do you want to draft this transaction?</source> + <translation>Do you want to draft this transaction?</translation> + </message> + <message> <source>Are you sure you want to send?</source> <translation>آیا برای ارسال کردن یا فرستادن مطمئن هستید؟</translation> </message> <message> + <source>Create Unsigned</source> + <translation>Create Unsigned</translation> + </message> + <message> <source>Save Transaction Data</source> <translation>ذخیره اطلاعات عملیات</translation> </message> <message> + <source>Partially Signed Transaction (Binary) (*.psbt)</source> + <translation>Partially Signed Transaction (Binary) (*.psbt)</translation> + </message> + <message> + <source>PSBT saved</source> + <translation>PSBT saved</translation> + </message> + <message> <source>or</source> <translation>یا</translation> </message> @@ -2102,6 +2572,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>تو میتوانی بعدا هزینه کارمزد را افزایش بدی(signals Replace-By-Fee, BIP-125)</translation> </message> <message> + <source>Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.</source> + <translation>Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.</translation> + </message> + <message> <source>Please, review your transaction.</source> <translation>لطفا,تراکنش خود را بازبینی کنید.</translation> </message> @@ -2110,18 +2584,34 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>کارمزد تراکنش</translation> </message> <message> + <source>Not signalling Replace-By-Fee, BIP-125.</source> + <translation>Not signalling Replace-By-Fee, BIP-125.</translation> + </message> + <message> <source>Total Amount</source> <translation>میزان کل</translation> </message> <message> + <source>To review recipient list click "Show Details..."</source> + <translation>To review recipient list click "Show Details..."</translation> + </message> + <message> <source>Confirm send coins</source> <translation>تایید کردن ارسال کوین ها</translation> </message> <message> + <source>Confirm transaction proposal</source> + <translation>Confirm transaction proposal</translation> + </message> + <message> <source>Send</source> <translation>ارسال</translation> </message> <message> + <source>Watch-only balance:</source> + <translation>Watch-only balance:</translation> + </message> + <message> <source>The recipient address is not valid. Please recheck.</source> <translation>آدرس گیرنده نامعتبر است.لطفا دوباره چک یا بررسی کنید.</translation> </message> @@ -2217,6 +2707,18 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>پاک کردن این ورودی</translation> </message> <message> + <source>The amount to send in the selected unit</source> + <translation>The amount to send in the selected unit</translation> + </message> + <message> + <source>The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.</source> + <translation>The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.</translation> + </message> + <message> + <source>S&ubtract fee from amount</source> + <translation>S&ubtract fee from amount</translation> + </message> + <message> <source>Use available balance</source> <translation>استفاده از موجودی حساب</translation> </message> @@ -2225,6 +2727,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>پیام:</translation> </message> <message> + <source>This is an unauthenticated payment request.</source> + <translation>This is an unauthenticated payment request.</translation> + </message> + <message> + <source>This is an authenticated payment request.</source> + <translation>This is an authenticated payment request.</translation> + </message> + <message> + <source>Enter a label for this address to add it to the list of used addresses</source> + <translation>Enter a label for this address to add it to the list of used addresses</translation> + </message> + <message> + <source>A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.</source> + <translation>A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.</translation> + </message> + <message> <source>Pay To:</source> <translation>پرداخت به:</translation> </message> @@ -2255,6 +2773,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>&ثبت پیام</translation> </message> <message> + <source>You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</source> + <translation>You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</translation> + </message> + <message> <source>The Bitcoin address to sign the message with</source> <translation>نشانی بیت‌کوین برای امضاء پیغام با آن</translation> </message> @@ -2307,10 +2829,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>تایید پیام</translation> </message> <message> + <source>Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!</source> + <translation>Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!</translation> + </message> + <message> <source>The Bitcoin address the message was signed with</source> <translation>نشانی بیت‌کوین که پیغام با آن امضاء شده</translation> </message> <message> + <source>The signed message to verify</source> + <translation>The signed message to verify</translation> + </message> + <message> + <source>The signature given when the message was signed</source> + <translation>The signature given when the message was signed</translation> + </message> + <message> <source>Verify the message to ensure it was signed with the specified Bitcoin address</source> <translation>پیام را تایید کنید تا مطمئن شوید که توسط آدرس بیت‌کوین مشخص شده امضا شده است.</translation> </message> @@ -2389,11 +2923,31 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p </context> <context> <name>TransactionDesc</name> + <message numerus="yes"> + <source>Open for %n more block(s)</source> + <translation><numerusform>Open for %n more block</numerusform><numerusform>Open for %n more blocks</numerusform></translation> + </message> <message> <source>Open until %1</source> <translation>باز تا %1</translation> </message> <message> + <source>conflicted with a transaction with %1 confirmations</source> + <translation>conflicted with a transaction with %1 confirmations</translation> + </message> + <message> + <source>0/unconfirmed, %1</source> + <translation>0/unconfirmed, %1</translation> + </message> + <message> + <source>in memory pool</source> + <translation>in memory pool</translation> + </message> + <message> + <source>not in memory pool</source> + <translation>not in memory pool</translation> + </message> + <message> <source>abandoned</source> <translation>رها شده</translation> </message> @@ -2449,6 +3003,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <source>Credit</source> <translation>اعتبار</translation> </message> + <message numerus="yes"> + <source>matures in %n more block(s)</source> + <translation><numerusform>matures in %n more block</numerusform><numerusform>matures in %n more blocks</numerusform></translation> + </message> <message> <source>not accepted</source> <translation>قبول نشده</translation> @@ -2458,6 +3016,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>اعتبار</translation> </message> <message> + <source>Total debit</source> + <translation>Total debit</translation> + </message> + <message> <source>Total credit</source> <translation>تمامی اعتبار</translation> </message> @@ -2486,10 +3048,26 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>حجم کل تراکنش</translation> </message> <message> + <source>Transaction virtual size</source> + <translation>Transaction virtual size</translation> + </message> + <message> + <source>Output index</source> + <translation>Output index</translation> + </message> + <message> + <source> (Certificate was not verified)</source> + <translation> (Certificate was not verified)</translation> + </message> + <message> <source>Merchant</source> <translation>بازرگان</translation> </message> <message> + <source>Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</source> + <translation>Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</translation> + </message> + <message> <source>Debug information</source> <translation>اطلاعات دی باگ Debug</translation> </message> @@ -2539,6 +3117,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <source>Label</source> <translation>برچسب</translation> </message> + <message numerus="yes"> + <source>Open for %n more block(s)</source> + <translation><numerusform>Open for %n more block</numerusform><numerusform>Open for %n more blocks</numerusform></translation> + </message> <message> <source>Open until %1</source> <translation>باز تا %1</translation> @@ -2552,10 +3134,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>رهاشده</translation> </message> <message> + <source>Confirming (%1 of %2 recommended confirmations)</source> + <translation>Confirming (%1 of %2 recommended confirmations)</translation> + </message> + <message> <source>Confirmed (%1 confirmations)</source> <translation>تأیید شده (%1 تأییدیه)</translation> </message> <message> + <source>Conflicted</source> + <translation>Conflicted</translation> + </message> + <message> + <source>Immature (%1 confirmations, will be available after %2)</source> + <translation>Immature (%1 confirmations, will be available after %2)</translation> + </message> + <message> <source>Generated but not accepted</source> <translation>تولید شده ولی هنوز قبول نشده است</translation> </message> @@ -2604,6 +3198,14 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>نوع تراکنش.</translation> </message> <message> + <source>Whether or not a watch-only address is involved in this transaction.</source> + <translation>Whether or not a watch-only address is involved in this transaction.</translation> + </message> + <message> + <source>User-defined intent/purpose of the transaction.</source> + <translation>User-defined intent/purpose of the transaction.</translation> + </message> + <message> <source>Amount removed from or added to balance.</source> <translation>میزان وجه کم شده یا اضافه شده به حساب</translation> </message> @@ -2747,10 +3349,18 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>گرفتن خروجی به مشکل خورد</translation> </message> <message> + <source>There was an error trying to save the transaction history to %1.</source> + <translation>There was an error trying to save the transaction history to %1.</translation> + </message> + <message> <source>Exporting Successful</source> <translation>خارج کردن موفقیت آمیز بود Exporting</translation> </message> <message> + <source>The transaction history was successfully saved to %1.</source> + <translation>The transaction history was successfully saved to %1.</translation> + </message> + <message> <source>Range:</source> <translation>دامنه:</translation> </message> @@ -2761,7 +3371,11 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p </context> <context> <name>UnitDisplayStatusBarControl</name> - </context> + <message> + <source>Unit to show amounts in. Click to select another unit.</source> + <translation>Unit to show amounts in. Click to select another unit.</translation> + </message> +</context> <context> <name>WalletController</name> <message> @@ -2773,13 +3387,29 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>آیا برای بستن کیف پول مطمئن هستید<i> %1 </i> ؟</translation> </message> <message> + <source>Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled.</source> + <translation>Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled.</translation> + </message> + <message> <source>Close all wallets</source> <translation>همه‌ی کیف پول‌ها را ببند</translation> </message> - </context> + <message> + <source>Are you sure you wish to close all wallets?</source> + <translation>Are you sure you wish to close all wallets?</translation> + </message> +</context> <context> <name>WalletFrame</name> <message> + <source>No wallet has been loaded. +Go to File > Open Wallet to load a wallet. +- OR -</source> + <translation>No wallet has been loaded. +Go to File > Open Wallet to load a wallet. +- OR -</translation> + </message> + <message> <source>Create a new wallet</source> <translation>ساخت کیف پول جدید</translation> </message> @@ -2791,6 +3421,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>ارسال کوین ها یا سکه ها</translation> </message> <message> + <source>Fee bump error</source> + <translation>Fee bump error</translation> + </message> + <message> <source>Increasing transaction fee failed</source> <translation>افزایش کارمزد تراکنش با خطا مواجه شد</translation> </message> @@ -2799,6 +3433,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>آیا میخواهید اندازه کارمزد را افزایش دهید؟</translation> </message> <message> + <source>Do you want to draft a transaction with fee increase?</source> + <translation>Do you want to draft a transaction with fee increase?</translation> + </message> + <message> <source>Current fee:</source> <translation>کارمزد الان:</translation> </message> @@ -2811,6 +3449,14 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>کارمزد جدید:</translation> </message> <message> + <source>Confirm fee bump</source> + <translation>Confirm fee bump</translation> + </message> + <message> + <source>Can't draft transaction.</source> + <translation>Can't draft transaction.</translation> + </message> + <message> <source>PSBT copied</source> <translation>PSBT کپی شد</translation> </message> @@ -2819,6 +3465,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>نمیتوان تراکنش را ثبت کرد</translation> </message> <message> + <source>Could not commit transaction</source> + <translation>Could not commit transaction</translation> + </message> + <message> <source>default wallet</source> <translation>کیف پول پیشفرض</translation> </message> @@ -2838,6 +3488,26 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>خطا</translation> </message> <message> + <source>Unable to decode PSBT from clipboard (invalid base64)</source> + <translation>Unable to decode PSBT from clipboard (invalid base64)</translation> + </message> + <message> + <source>Load Transaction Data</source> + <translation>Load Transaction Data</translation> + </message> + <message> + <source>Partially Signed Transaction (*.psbt)</source> + <translation>Partially Signed Transaction (*.psbt)</translation> + </message> + <message> + <source>PSBT file must be smaller than 100 MiB</source> + <translation>PSBT file must be smaller than 100 MiB</translation> + </message> + <message> + <source>Unable to decode PSBT</source> + <translation>Unable to decode PSBT</translation> + </message> + <message> <source>Backup Wallet</source> <translation>بازیابی یا پشتیبان گیری کیف پول</translation> </message> @@ -2850,10 +3520,18 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>بازیابی یا پشتیبان گیری با خطا مواجه شد</translation> </message> <message> + <source>There was an error trying to save the wallet data to %1.</source> + <translation>There was an error trying to save the wallet data to %1.</translation> + </message> + <message> <source>Backup Successful</source> <translation>بازیابی یا پشتیبان گیری موفقیت آمیز بود.</translation> </message> <message> + <source>The wallet data was successfully saved to %1.</source> + <translation>The wallet data was successfully saved to %1.</translation> + </message> + <message> <source>Cancel</source> <translation>لغو</translation> </message> @@ -2861,18 +3539,110 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <context> <name>bitcoin-core</name> <message> + <source>Distributed under the MIT software license, see the accompanying file %s or %s</source> + <translation>Distributed under the MIT software license, see the accompanying file %s or %s</translation> + </message> + <message> + <source>Prune configured below the minimum of %d MiB. Please use a higher number.</source> + <translation>Prune configured below the minimum of %d MiB. Please use a higher number.</translation> + </message> + <message> + <source>Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node)</source> + <translation>Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node)</translation> + </message> + <message> + <source>Pruning blockstore...</source> + <translation>Pruning blockstore...</translation> + </message> + <message> + <source>Unable to start HTTP server. See debug log for details.</source> + <translation>Unable to start HTTP server. See debug log for details.</translation> + </message> + <message> <source>The %s developers</source> <translation>%s توسعه دهندگان</translation> </message> <message> + <source>Cannot obtain a lock on data directory %s. %s is probably already running.</source> + <translation>Cannot obtain a lock on data directory %s. %s is probably already running.</translation> + </message> + <message> + <source>Cannot provide specific connections and have addrman find outgoing connections at the same.</source> + <translation>Cannot provide specific connections and have addrman find outgoing connections at the same.</translation> + </message> + <message> + <source>Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</source> + <translation>Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</translation> + </message> + <message> + <source>More than one onion bind address is provided. Using %s for the automatically created Tor onion service.</source> + <translation>More than one onion bind address is provided. Using %s for the automatically created Tor onion service.</translation> + </message> + <message> + <source>Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.</source> + <translation>Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.</translation> + </message> + <message> + <source>Please contribute if you find %s useful. Visit %s for further information about the software.</source> + <translation>Please contribute if you find %s useful. Visit %s for further information about the software.</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to prepare the statement to fetch sqlite wallet schema version: %s</source> + <translation>SQLiteDatabase: Failed to prepare the statement to fetch sqlite wallet schema version: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to prepare the statement to fetch the application id: %s</source> + <translation>SQLiteDatabase: Failed to prepare the statement to fetch the application id: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported</source> + <translation>SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported</translation> + </message> + <message> + <source>The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct</source> + <translation>The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct</translation> + </message> + <message> <source>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</source> <translation>این یک نسخه ی آزمایشی است - با مسئولیت خودتان از آن استفاده کنید - آن را در معدن و بازرگانی بکار نگیرید.</translation> </message> <message> + <source>This is the transaction fee you may discard if change is smaller than dust at this level</source> + <translation>This is the transaction fee you may discard if change is smaller than dust at this level</translation> + </message> + <message> + <source>Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate.</source> + <translation>Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate.</translation> + </message> + <message> + <source>Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain</source> + <translation>Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain</translation> + </message> + <message> + <source>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</source> + <translation>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</translation> + </message> + <message> + <source>Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.</source> + <translation>Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.</translation> + </message> + <message> + <source>-maxmempool must be at least %d MB</source> + <translation>-maxmempool must be at least %d MB</translation> + </message> + <message> + <source>Cannot resolve -%s address: '%s'</source> + <translation>Cannot resolve -%s address: '%s'</translation> + </message> + <message> <source>Change index out of range</source> <translation>تغییر دادن اندیس خارج از دامنه</translation> </message> <message> + <source>Config setting for %s only applied on %s network when in [%s] section.</source> + <translation>Config setting for %s only applied on %s network when in [%s] section.</translation> + </message> + <message> <source>Copyright (C) %i-%i</source> <translation>کپی رایت (C) %i-%i</translation> </message> @@ -2881,6 +3651,14 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>یک پایگاه داده ی بلوک خراب یافت شد</translation> </message> <message> + <source>Could not find asmap file %s</source> + <translation>Could not find asmap file %s</translation> + </message> + <message> + <source>Could not parse asmap file %s</source> + <translation>Could not parse asmap file %s</translation> + </message> + <message> <source>Do you want to rebuild the block database now?</source> <translation>آیا میخواهید الان پایگاه داده بلاک را بازسازی کنید؟</translation> </message> @@ -2889,10 +3667,26 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>خطا در آماده سازی پایگاه داده ی بلوک</translation> </message> <message> + <source>Error initializing wallet database environment %s!</source> + <translation>Error initializing wallet database environment %s!</translation> + </message> + <message> <source>Error loading %s</source> <translation>خطا بازگذاری %s</translation> </message> <message> + <source>Error loading %s: Private keys can only be disabled during creation</source> + <translation>Error loading %s: Private keys can only be disabled during creation</translation> + </message> + <message> + <source>Error loading %s: Wallet corrupted</source> + <translation>Error loading %s: Wallet corrupted</translation> + </message> + <message> + <source>Error loading %s: Wallet requires newer version of %s</source> + <translation>Error loading %s: Wallet requires newer version of %s</translation> + </message> + <message> <source>Error loading block database</source> <translation>خطا در بارگذاری پایگاه داده بلاک block</translation> </message> @@ -2905,14 +3699,82 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>شنیدن هر گونه درگاه انجام پذیر نیست. ازlisten=0 برای اینکار استفاده کیند.</translation> </message> <message> + <source>Failed to rescan the wallet during initialization</source> + <translation>Failed to rescan the wallet during initialization</translation> + </message> + <message> + <source>Failed to verify database</source> + <translation>Failed to verify database</translation> + </message> + <message> + <source>Ignoring duplicate -wallet %s.</source> + <translation>Ignoring duplicate -wallet %s.</translation> + </message> + <message> <source>Importing...</source> <translation>در حال وارد کردن...</translation> </message> <message> + <source>Incorrect or no genesis block found. Wrong datadir for network?</source> + <translation>Incorrect or no genesis block found. Wrong datadir for network?</translation> + </message> + <message> + <source>Initialization sanity check failed. %s is shutting down.</source> + <translation>Initialization sanity check failed. %s is shutting down.</translation> + </message> + <message> + <source>Invalid P2P permission: '%s'</source> + <translation>Invalid P2P permission: '%s'</translation> + </message> + <message> <source>Invalid amount for -%s=<amount>: '%s'</source> <translation>میزان نامعتبر برای -%s=<amount>: '%s'</translation> </message> <message> + <source>Invalid amount for -discardfee=<amount>: '%s'</source> + <translation>Invalid amount for -discardfee=<amount>: '%s'</translation> + </message> + <message> + <source>Invalid amount for -fallbackfee=<amount>: '%s'</source> + <translation>Invalid amount for -fallbackfee=<amount>: '%s'</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to execute statement to verify database: %s</source> + <translation>SQLiteDatabase: Failed to execute statement to verify database: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s</source> + <translation>SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to fetch the application id: %s</source> + <translation>SQLiteDatabase: Failed to fetch the application id: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to prepare statement to verify database: %s</source> + <translation>SQLiteDatabase: Failed to prepare statement to verify database: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Failed to read database verification error: %s</source> + <translation>SQLiteDatabase: Failed to read database verification error: %s</translation> + </message> + <message> + <source>SQLiteDatabase: Unexpected application id. Expected %u, got %u</source> + <translation>SQLiteDatabase: Unexpected application id. Expected %u, got %u</translation> + </message> + <message> + <source>Specified blocks directory "%s" does not exist.</source> + <translation>Specified blocks directory "%s" does not exist.</translation> + </message> + <message> + <source>Unknown address type '%s'</source> + <translation>Unknown address type '%s'</translation> + </message> + <message> + <source>Unknown change type '%s'</source> + <translation>Unknown change type '%s'</translation> + </message> + <message> <source>Upgrading txindex database</source> <translation>ارتقا دادن پایگاه داده اندیس تراکنش ها یا txindex</translation> </message> @@ -2929,30 +3791,102 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>توصیفگرهای فایل به اندازه کافی در دسترس نیست</translation> </message> <message> + <source>Prune cannot be configured with a negative value.</source> + <translation>Prune cannot be configured with a negative value.</translation> + </message> + <message> + <source>Prune mode is incompatible with -txindex.</source> + <translation>Prune mode is incompatible with -txindex.</translation> + </message> + <message> <source>Replaying blocks...</source> <translation>در حال بازبینی بلوک‌ها...</translation> </message> <message> + <source>Rewinding blocks...</source> + <translation>Rewinding blocks...</translation> + </message> + <message> <source>The source code is available from %s.</source> <translation>سورس کد موجود است از %s.</translation> </message> <message> + <source>Transaction fee and change calculation failed</source> + <translation>Transaction fee and change calculation failed</translation> + </message> + <message> + <source>Unable to bind to %s on this computer. %s is probably already running.</source> + <translation>Unable to bind to %s on this computer. %s is probably already running.</translation> + </message> + <message> <source>Unable to generate keys</source> <translation>نمیتوان کلید ها را تولید کرد</translation> </message> <message> + <source>Unsupported logging category %s=%s.</source> + <translation>Unsupported logging category %s=%s.</translation> + </message> + <message> <source>Upgrading UTXO database</source> <translation>ارتقا دادن پایگاه داده UTXO</translation> </message> <message> + <source>User Agent comment (%s) contains unsafe characters.</source> + <translation>User Agent comment (%s) contains unsafe characters.</translation> + </message> + <message> <source>Verifying blocks...</source> <translation>در حال تایید کردن بلاک ها...</translation> </message> <message> + <source>Error: Listening for incoming connections failed (listen returned error %s)</source> + <translation>Error: Listening for incoming connections failed (listen returned error %s)</translation> + </message> + <message> + <source>%s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup.</source> + <translation>%s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup.</translation> + </message> + <message> + <source>Cannot upgrade a non HD split wallet without upgrading to support pre split keypool. Please use version 169900 or no version specified.</source> + <translation>Cannot upgrade a non HD split wallet without upgrading to support pre split keypool. Please use version 169900 or no version specified.</translation> + </message> + <message> + <source>Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)</source> + <translation>Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)</translation> + </message> + <message> <source>The transaction amount is too small to send after the fee has been deducted</source> <translation>مبلغ تراکنش کمتر از آن است که پس از کسر هزینه تراکنش قابل ارسال باشد</translation> </message> <message> + <source>This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet</source> + <translation>This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet</translation> + </message> + <message> + <source>This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection.</source> + <translation>This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection.</translation> + </message> + <message> + <source>Transaction needs a change address, but we can't generate it. Please call keypoolrefill first.</source> + <translation>Transaction needs a change address, but we can't generate it. Please call keypoolrefill first.</translation> + </message> + <message> + <source>You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain</source> + <translation>You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain</translation> + </message> + <message> + <source>A fatal internal error occurred, see debug.log for details</source> + <translation>A fatal internal error occurred, see debug.log for details</translation> + </message> + <message> + <source>Cannot set -peerblockfilters without -blockfilterindex.</source> + <translation>Cannot set -peerblockfilters without -blockfilterindex.</translation> + </message> + <message> + <source>Disk space is too low!</source> + <translation>Disk space is too low!</translation> + </message> + <message> <source>Error reading from database, shutting down.</source> <translation>خواندن از پایگاه داده با خطا مواجه شد,در حال خاموش شدن.</translation> </message> @@ -2961,14 +3895,72 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>خطا در بارگذاری پایگاه داده ها</translation> </message> <message> + <source>Error: Keypool ran out, please call keypoolrefill first</source> + <translation>Error: Keypool ran out, please call keypoolrefill first</translation> + </message> + <message> + <source>Fee rate (%s) is lower than the minimum fee rate setting (%s)</source> + <translation>Fee rate (%s) is lower than the minimum fee rate setting (%s)</translation> + </message> + <message> + <source>Invalid -onion address or hostname: '%s'</source> + <translation>Invalid -onion address or hostname: '%s'</translation> + </message> + <message> <source>Invalid -proxy address or hostname: '%s'</source> <translation>آدرس پراکسی یا هاست نامعتبر: ' %s'</translation> </message> <message> + <source>Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s)</source> + <translation>Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s)</translation> + </message> + <message> + <source>Invalid netmask specified in -whitelist: '%s'</source> + <translation>Invalid netmask specified in -whitelist: '%s'</translation> + </message> + <message> + <source>Need to specify a port with -whitebind: '%s'</source> + <translation>Need to specify a port with -whitebind: '%s'</translation> + </message> + <message> + <source>No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>.</source> + <translation>No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>.</translation> + </message> + <message> + <source>Prune mode is incompatible with -blockfilterindex.</source> + <translation>Prune mode is incompatible with -blockfilterindex.</translation> + </message> + <message> + <source>Reducing -maxconnections from %d to %d, because of system limitations.</source> + <translation>Reducing -maxconnections from %d to %d, because of system limitations.</translation> + </message> + <message> + <source>Section [%s] is not recognized.</source> + <translation>Section [%s] is not recognized.</translation> + </message> + <message> <source>Signing transaction failed</source> <translation>ثبت تراکنش با خطا مواجه شد</translation> </message> <message> + <source>Specified -walletdir "%s" does not exist</source> + <translation>Specified -walletdir "%s" does not exist</translation> + </message> + <message> + <source>Specified -walletdir "%s" is a relative path</source> + <translation>Specified -walletdir "%s" is a relative path</translation> + </message> + <message> + <source>Specified -walletdir "%s" is not a directory</source> + <translation>Specified -walletdir "%s" is not a directory</translation> + </message> + <message> + <source>The specified config file %s does not exist +</source> + <translation>The specified config file %s does not exist +</translation> + </message> + <message> <source>The transaction amount is too small to pay the fee</source> <translation>حجم تراکنش بسیار کم است برای پرداخت کارمزد</translation> </message> @@ -2985,10 +3977,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>حجم تراکنش خیلی زیاد است</translation> </message> <message> + <source>Unable to bind to %s on this computer (bind returned error %s)</source> + <translation>Unable to bind to %s on this computer (bind returned error %s)</translation> + </message> + <message> + <source>Unable to create the PID file '%s': %s</source> + <translation>Unable to create the PID file '%s': %s</translation> + </message> + <message> <source>Unable to generate initial keys</source> <translation>نمیتوان کلید های اولیه را تولید کرد.</translation> </message> <message> + <source>Unknown -blockfilterindex value %s.</source> + <translation>Unknown -blockfilterindex value %s.</translation> + </message> + <message> <source>Verifying wallet(s)...</source> <translation>در حال تایید شدن کیف پول(ها)...</translation> </message> @@ -2997,10 +4001,18 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>هشدار: قوانین جدید ناشناخته‌ای فعال شده‌اند (نسخه‌بیت %i)</translation> </message> <message> + <source>-maxtxfee is set very high! Fees this large could be paid on a single transaction.</source> + <translation>-maxtxfee is set very high! Fees this large could be paid on a single transaction.</translation> + </message> + <message> <source>This is the transaction fee you may pay when fee estimates are not available.</source> <translation>این هزینه تراکنشی است که در صورت عدم وجود هزینه تخمینی، پرداخت می کنید.</translation> </message> <message> + <source>Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.</source> + <translation>Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.</translation> + </message> + <message> <source>%s is set very high!</source> <translation>%s بسیار بزرگ انتخاب شده است.</translation> </message> @@ -3009,6 +4021,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>ایجاد نخ‌های شبکه ...</translation> </message> <message> + <source>The wallet will avoid paying less than the minimum relay fee.</source> + <translation>The wallet will avoid paying less than the minimum relay fee.</translation> + </message> + <message> <source>This is the minimum transaction fee you pay on every transaction.</source> <translation>این کمترین فی تراکنش است که در هر تراکنش پرداخت می‌نمایید.</translation> </message> @@ -3038,6 +4054,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis p <translation>وجوه ناکافی</translation> </message> <message> + <source>Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee.</source> + <translation>Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee.</translation> + </message> + <message> <source>Warning: Private keys detected in wallet {%s} with disabled private keys</source> <translation>هشدار: کلید های خصوصی در کیف پول شما شناسایی شده است { %s} به همراه کلید های خصوصی غیر فعال</translation> </message> |