diff options
Diffstat (limited to 'src/qt/locale/bitcoin_en_GB.ts')
| -rw-r--r-- | src/qt/locale/bitcoin_en_GB.ts | 650 |
1 files changed, 38 insertions, 612 deletions
diff --git a/src/qt/locale/bitcoin_en_GB.ts b/src/qt/locale/bitcoin_en_GB.ts index dbb6a06874..7da223f52e 100644 --- a/src/qt/locale/bitcoin_en_GB.ts +++ b/src/qt/locale/bitcoin_en_GB.ts @@ -30,6 +30,10 @@ <translation>Delete the currently selected address from the list</translation> </message> <message> + <source>Enter address or label to search</source> + <translation>Enter address or label to search</translation> + </message> + <message> <source>Export the data in the current tab to a file</source> <translation>Export the data in the current tab to a file</translation> </message> @@ -322,6 +326,10 @@ <translation>Open &URI...</translation> </message> <message> + <source>Wallet:</source> + <translation>Wallet:</translation> + </message> + <message> <source>Click to disable network activity.</source> <translation>Click to disable network activity.</translation> </message> @@ -510,6 +518,12 @@ </translation> </message> <message> + <source>Wallet: %1 +</source> + <translation>Wallet: %1 +</translation> + </message> + <message> <source>Type: %1 </source> <translation>Type: %1 @@ -730,10 +744,6 @@ <translation>&Address</translation> </message> <message> - <source>New receiving address</source> - <translation>New receiving address</translation> - </message> - <message> <source>New sending address</source> <translation>New sending address</translation> </message> @@ -750,10 +760,6 @@ <translation>The entered address "%1" is not a valid Bitcoin address.</translation> </message> <message> - <source>The entered address "%1" is already in the address book.</source> - <translation>The entered address "%1" is already in the address book.</translation> - </message> - <message> <source>Could not unlock wallet.</source> <translation>Could not unlock wallet.</translation> </message> @@ -803,42 +809,6 @@ <source>Command-line options</source> <translation>Command-line options</translation> </message> - <message> - <source>Usage:</source> - <translation>Usage:</translation> - </message> - <message> - <source>command-line options</source> - <translation>command-line options</translation> - </message> - <message> - <source>UI Options:</source> - <translation>UI Options:</translation> - </message> - <message> - <source>Choose data directory on startup (default: %u)</source> - <translation>Choose data directory on startup (default: %u)</translation> - </message> - <message> - <source>Set language, for example "de_DE" (default: system locale)</source> - <translation>Set language, for example "de_DE" (default: system locale)</translation> - </message> - <message> - <source>Start minimized</source> - <translation>Start minimised</translation> - </message> - <message> - <source>Set SSL root certificates for payment request (default: -system-)</source> - <translation>Set SSL root certificates for payment request (default: -system-)</translation> - </message> - <message> - <source>Show splash screen on startup (default: %u)</source> - <translation>Show splash screen on startup (default: %u)</translation> - </message> - <message> - <source>Reset all settings changed in the GUI</source> - <translation>Reset all settings changed in the GUI</translation> - </message> </context> <context> <name>Intro</name> @@ -1068,6 +1038,10 @@ <translation>&Network</translation> </message> <message> + <source>GB</source> + <translation>GB</translation> + </message> + <message> <source>(0 = auto, <0 = leave that many cores free)</source> <translation>(0 = auto, <0 = leave that many cores free)</translation> </message> @@ -1535,10 +1509,6 @@ <translation>Error: Specified data directory "%1" does not exist.</translation> </message> <message> - <source>Error: Cannot parse configuration file: %1. Only use key=value syntax.</source> - <translation>Error: Cannot parse configuration file: %1. Only use key=value syntax.</translation> - </message> - <message> <source>Error: %1</source> <translation>Error: %1</translation> </message> @@ -1629,6 +1599,14 @@ <translation>Memory usage</translation> </message> <message> + <source>Wallet: </source> + <translation>Wallet:</translation> + </message> + <message> + <source>(none)</source> + <translation>(none)</translation> + </message> + <message> <source>&Reset</source> <translation>&Reset</translation> </message> @@ -1900,14 +1878,6 @@ <translation>&Request payment</translation> </message> <message> - <source>Bech32 addresses (BIP-173) are cheaper to spend from and offer better protection against typos. When unchecked a P2SH wrapped SegWit address will be created, compatible with older wallets.</source> - <translation>Bech32 addresses (BIP-173) are cheaper to spend from and offer better protection against typos. When unchecked a P2SH wrapped SegWit address will be created, compatible with older wallets.</translation> - </message> - <message> - <source>Generate Bech32 address</source> - <translation>Generate Bech32 address</translation> - </message> - <message> <source>Show the selected request (does the same as double clicking an entry)</source> <translation>Show the selected request (does the same as double clicking an entry)</translation> </message> @@ -1987,6 +1957,10 @@ <translation>Message</translation> </message> <message> + <source>Wallet</source> + <translation>Wallet</translation> + </message> + <message> <source>Resulting URI too long, try to reduce the text for label / message.</source> <translation>Resulting URI too long, try to reduce the text for label / message.</translation> </message> @@ -2105,10 +2079,6 @@ <translation>per kilobyte</translation> </message> <message> - <source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source> - <translation>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</translation> - </message> - <message> <source>Hide</source> <translation>Hide</translation> </message> @@ -2217,14 +2187,6 @@ <translation>Are you sure you want to send?</translation> </message> <message> - <source>added as transaction fee</source> - <translation>added as transaction fee</translation> - </message> - <message> - <source>Total Amount %1</source> - <translation>Total Amount %1</translation> - </message> - <message> <source>or</source> <translation>or</translation> </message> @@ -2233,6 +2195,10 @@ <translation>You can increase the fee later (signals Replace-By-Fee, BIP-125).</translation> </message> <message> + <source>Transaction fee</source> + <translation>Transaction fee</translation> + </message> + <message> <source>Not signalling Replace-By-Fee, BIP-125.</source> <translation>Not signalling Replace-By-Fee, BIP-125.</translation> </message> @@ -2578,10 +2544,6 @@ <translation>conflicted with a transaction with %1 confirmations</translation> </message> <message> - <source>%1/offline</source> - <translation>%1/offline</translation> - </message> - <message> <source>0/unconfirmed, %1</source> <translation>0/unconfirmed, %1</translation> </message> @@ -2610,14 +2572,6 @@ <translation>Status</translation> </message> <message> - <source>, has not been successfully broadcast yet</source> - <translation>, has not been successfully broadcast yet</translation> - </message> - <message numerus="yes"> - <source>, broadcast through %n node(s)</source> - <translation><numerusform>, broadcast through %n node</numerusform><numerusform>, broadcast through %n nodes</numerusform></translation> - </message> - <message> <source>Date</source> <translation>Date</translation> </message> @@ -2772,10 +2726,6 @@ <translation>Open until %1</translation> </message> <message> - <source>Offline</source> - <translation>Offline</translation> - </message> - <message> <source>Unconfirmed</source> <translation>Unconfirmed</translation> </message> @@ -2800,10 +2750,6 @@ <translation>Immature (%1 confirmations, will be available after %2)</translation> </message> <message> - <source>This block was not received by any other nodes and will probably not be accepted!</source> - <translation>This block was not received by any other nodes and will probably not be accepted!</translation> - </message> - <message> <source>Generated but not accepted</source> <translation>Generated but not accepted</translation> </message> @@ -3114,38 +3060,18 @@ <source>The wallet data was successfully saved to %1.</source> <translation>The wallet data was successfully saved to %1.</translation> </message> + <message> + <source>Cancel</source> + <translation>Cancel</translation> + </message> </context> <context> <name>bitcoin-core</name> <message> - <source>Options:</source> - <translation>Options:</translation> - </message> - <message> - <source>Specify data directory</source> - <translation>Specify data directory</translation> - </message> - <message> - <source>Connect to a node to retrieve peer addresses, and disconnect</source> - <translation>Connect to a node to retrieve peer addresses, and disconnect</translation> - </message> - <message> - <source>Specify your own public address</source> - <translation>Specify your own public address</translation> - </message> - <message> - <source>Accept command line and JSON-RPC commands</source> - <translation>Accept command line and JSON-RPC commands</translation> - </message> - <message> <source>Distributed under the MIT software license, see the accompanying file %s or %s</source> <translation>Distributed under the MIT software license, see the accompanying file %s or %s.</translation> </message> <message> - <source>If <category> is not supplied or if <category> = 1, output all debugging information.</source> - <translation>If <category> is not supplied or if <category> = 1, output all debugging information.</translation> - </message> - <message> <source>Prune configured below the minimum of %d MiB. Please use a higher number.</source> <translation>Prune configured below the minimum of %d MiB. Please use a higher number.</translation> </message> @@ -3162,18 +3088,10 @@ <translation>Error: A fatal internal error occurred, see debug.log for details</translation> </message> <message> - <source>Fee (in %s/kB) to add to transactions you send (default: %s)</source> - <translation>Fee (in %s/kB) to add to transactions you send (default: %s)</translation> - </message> - <message> <source>Pruning blockstore...</source> <translation>Pruning blockstore...</translation> </message> <message> - <source>Run in the background as a daemon and accept commands</source> - <translation>Run in the background as a daemon and accept commands</translation> - </message> - <message> <source>Unable to start HTTP server. See debug log for details.</source> <translation>Unable to start HTTP server. See debug log for details.</translation> </message> @@ -3186,22 +3104,6 @@ <translation>The %s developers</translation> </message> <message> - <source>A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)</source> - <translation>A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)</translation> - </message> - <message> - <source>Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)</source> - <translation>Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)</translation> - </message> - <message> - <source>Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info)</source> - <translation>Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info).</translation> - </message> - <message> - <source>Bind to given address and always listen on it. Use [host]:port notation for IPv6</source> - <translation>Bind to given address and always listen on it. Use [host]:port notation for IPv6</translation> - </message> - <message> <source>Cannot obtain a lock on data directory %s. %s is probably already running.</source> <translation>Cannot obtain a lock on data directory %s. %s is probably already running.</translation> </message> @@ -3210,42 +3112,10 @@ <translation>Cannot provide specific connections and have addrman find outgoing connections at the same.</translation> </message> <message> - <source>Connect only to the specified node(s); -connect=0 disables automatic connections (the rules for this peer are the same as for -addnode)</source> - <translation>Connect only to the specified node(s); -connect=0 disables automatic connections (the rules for this peer are the same as for -addnode).</translation> - </message> - <message> - <source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source> - <translation>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</translation> - </message> - <message> <source>Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</source> <translation>Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</translation> </message> <message> - <source>Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except one or more specified categories.</source> - <translation>Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except one or more specified categories.</translation> - </message> - <message> - <source>Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)</source> - <translation>Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)</translation> - </message> - <message> - <source>Extra transactions to keep in memory for compact block reconstructions (default: %u)</source> - <translation>Extra transactions to keep in memory for compact block reconstructions (default: %u).</translation> - </message> - <message> - <source>If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)</source> - <translation>If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s).</translation> - </message> - <message> - <source>Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)</source> - <translation>Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)</translation> - </message> - <message> - <source>Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)</source> - <translation>Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)</translation> - </message> - <message> <source>Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.</source> <translation>Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.</translation> </message> @@ -3254,22 +3124,6 @@ <translation>Please contribute if you find %s useful. Visit %s for further information about the software.</translation> </message> <message> - <source>Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect used)</source> - <translation>Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect used).</translation> - </message> - <message> - <source>Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)</source> - <translation>Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)</translation> - </message> - <message> - <source>Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)</source> - <translation>Set lowest fee rate (in %s/kB) for transactions to be included in block creation (default: %s).</translation> - </message> - <message> - <source>Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)</source> - <translation>Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)</translation> - </message> - <message> <source>The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct</source> <translation>The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct</translation> </message> @@ -3290,18 +3144,6 @@ <translation>Unable to rewind the database to a pre-fork state. You will need to re-download the blockchain</translation> </message> <message> - <source>Use UPnP to map the listening port (default: 1 when listening and no -proxy)</source> - <translation>Use UPnP to map the listening port (default: 1 when listening and no -proxy)</translation> - </message> - <message> - <source>Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times</source> - <translation>Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times.</translation> - </message> - <message> - <source>Wallet will not create transactions that violate mempool chain limits (default: %u)</source> - <translation>Wallet will not create transactions that violate mempool chain limits (default: %u).</translation> - </message> - <message> <source>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</source> <translation>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</translation> </message> @@ -3310,10 +3152,6 @@ <translation>Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.</translation> </message> <message> - <source>Whether to save the mempool on shutdown and load on restart (default: %u)</source> - <translation>Whether to save the mempool on shutdown and load on restart (default: %u).</translation> - </message> - <message> <source>%d of last 100 blocks have unexpected version</source> <translation>%d of last 100 blocks have unexpected version.</translation> </message> @@ -3326,42 +3164,14 @@ <translation>-maxmempool must be at least %d MB</translation> </message> <message> - <source><category> can be:</source> - <translation><category> can be:</translation> - </message> - <message> - <source>Accept connections from outside (default: 1 if no -proxy or -connect)</source> - <translation>Accept connections from outside (default: 1 if no -proxy or -connect)</translation> - </message> - <message> - <source>Append comment to the user agent string</source> - <translation>Append comment to the user agent string</translation> - </message> - <message> - <source>Attempt to recover private keys from a corrupt wallet on startup</source> - <translation>Attempt to recover private keys from a corrupt wallet on startup</translation> - </message> - <message> - <source>Block creation options:</source> - <translation>Block creation options:</translation> - </message> - <message> <source>Cannot resolve -%s address: '%s'</source> <translation>Cannot resolve -%s address: '%s'</translation> </message> <message> - <source>Chain selection options:</source> - <translation>Chain selection options:</translation> - </message> - <message> <source>Change index out of range</source> <translation>Change index out of range</translation> </message> <message> - <source>Connection options:</source> - <translation>Connection options:</translation> - </message> - <message> <source>Copyright (C) %i-%i</source> <translation>Copyright (C) %i-%i</translation> </message> @@ -3370,38 +3180,10 @@ <translation>Corrupted block database detected</translation> </message> <message> - <source>Debugging/Testing options:</source> - <translation>Debugging/Testing options:</translation> - </message> - <message> - <source>Do not load the wallet and disable wallet RPC calls</source> - <translation>Do not load the wallet and disable wallet RPC calls</translation> - </message> - <message> <source>Do you want to rebuild the block database now?</source> <translation>Do you want to rebuild the block database now?</translation> </message> <message> - <source>Enable publish hash block in <address></source> - <translation>Enable publish hash block in <address></translation> - </message> - <message> - <source>Enable publish hash transaction in <address></source> - <translation>Enable publish hash transaction in <address></translation> - </message> - <message> - <source>Enable publish raw block in <address></source> - <translation>Enable publish raw block in <address></translation> - </message> - <message> - <source>Enable publish raw transaction in <address></source> - <translation>Enable publish raw transaction in <address></translation> - </message> - <message> - <source>Enable transaction replacement in the memory pool (default: %u)</source> - <translation>Enable transaction replacement in the memory pool (default: %u)</translation> - </message> - <message> <source>Error creating %s: You can't create non-HD wallets with this version.</source> <translation>Error creating %s: You can't create non-HD wallets with this version.</translation> </message> @@ -3470,10 +3252,6 @@ <translation>Invalid amount for -fallbackfee=<amount>: '%s'</translation> </message> <message> - <source>Keep the transaction memory pool below <n> megabytes (default: %u)</source> - <translation>Keep the transaction memory pool below <n> megabytes (default: %u)</translation> - </message> - <message> <source>Loading P2P addresses...</source> <translation>Loading P2P addresses...</translation> </message> @@ -3482,26 +3260,10 @@ <translation>Loading banlist...</translation> </message> <message> - <source>Location of the auth cookie (default: data dir)</source> - <translation>Location of the auth cookie (default: data dir)</translation> - </message> - <message> <source>Not enough file descriptors available.</source> <translation>Not enough file descriptors available.</translation> </message> <message> - <source>Only connect to nodes in network <net> (ipv4, ipv6 or onion)</source> - <translation>Only connect to nodes in network <net> (ipv4, ipv6 or onion)</translation> - </message> - <message> - <source>Print this help message and exit</source> - <translation>Print this help message and exit</translation> - </message> - <message> - <source>Print version and exit</source> - <translation>Print version and exit</translation> - </message> - <message> <source>Prune cannot be configured with a negative value.</source> <translation>Prune cannot be configured with a negative value.</translation> </message> @@ -3510,14 +3272,6 @@ <translation>Prune mode is incompatible with -txindex.</translation> </message> <message> - <source>Rebuild chain state and block index from the blk*.dat files on disk</source> - <translation>Rebuild chain state and block index from the blk*.dat files on disk</translation> - </message> - <message> - <source>Rebuild chain state from the currently indexed blocks</source> - <translation>Rebuild chain state from the currently indexed blocks</translation> - </message> - <message> <source>Replaying blocks...</source> <translation>Replaying blocks...</translation> </message> @@ -3526,18 +3280,6 @@ <translation>Rewinding blocks...</translation> </message> <message> - <source>Send transactions with full-RBF opt-in enabled (RPC only, default: %u)</source> - <translation>Send transactions with full-RBF opt-in enabled (RPC only, default: %u).</translation> - </message> - <message> - <source>Set database cache size in megabytes (%d to %d, default: %d)</source> - <translation>Set database cache size in megabytes (%d to %d, default: %d)</translation> - </message> - <message> - <source>Specify wallet file (within data directory)</source> - <translation>Specify wallet file (within data directory)</translation> - </message> - <message> <source>The source code is available from %s.</source> <translation>The source code is available from %s.</translation> </message> @@ -3570,14 +3312,6 @@ <translation>Upgrading UTXO database</translation> </message> <message> - <source>Use UPnP to map the listening port (default: %u)</source> - <translation>Use UPnP to map the listening port (default: %u)</translation> - </message> - <message> - <source>Use the test chain</source> - <translation>Use the test chain</translation> - </message> - <message> <source>User Agent comment (%s) contains unsafe characters.</source> <translation>User Agent comment (%s) contains unsafe characters.</translation> </message> @@ -3586,90 +3320,26 @@ <translation>Verifying blocks...</translation> </message> <message> - <source>Wallet debugging/testing options:</source> - <translation>Wallet debugging/testing options:</translation> - </message> - <message> <source>Wallet needed to be rewritten: restart %s to complete</source> <translation>Wallet needed to be rewritten: restart %s to complete</translation> </message> <message> - <source>Wallet options:</source> - <translation>Wallet options:</translation> - </message> - <message> - <source>Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times</source> - <translation>Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times</translation> - </message> - <message> - <source>Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6</source> - <translation>Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6</translation> - </message> - <message> - <source>Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)</source> - <translation>Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)</translation> - </message> - <message> - <source>Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)</source> - <translation>Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)</translation> - </message> - <message> <source>Error: Listening for incoming connections failed (listen returned error %s)</source> <translation>Error: Listening for incoming connections failed (listen returned error %s)</translation> </message> <message> - <source>Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)</source> - <translation>Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)</translation> - </message> - <message> - <source>Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)</source> - <translation>Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)</translation> - </message> - <message> - <source>If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)</source> - <translation>If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)</translation> - </message> - <message> <source>Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)</source> <translation>Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)</translation> </message> <message> - <source>Maximum size of data in data carrier transactions we relay and mine (default: %u)</source> - <translation>Maximum size of data in data carrier transactions we relay and mine (default: %u)</translation> - </message> - <message> - <source>Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)</source> - <translation>Randomise credentials for every proxy connection. This enables Tor stream isolation (default: %u)</translation> - </message> - <message> <source>The transaction amount is too small to send after the fee has been deducted</source> <translation>The transaction amount is too small to send after the fee has been deducted</translation> </message> <message> - <source>Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway</source> - <translation>Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway</translation> - </message> - <message> <source>You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain</source> <translation>You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain</translation> </message> <message> - <source>(default: %u)</source> - <translation>(default: %u)</translation> - </message> - <message> - <source>Accept public REST requests (default: %u)</source> - <translation>Accept public REST requests (default: %u)</translation> - </message> - <message> - <source>Automatically create Tor hidden service (default: %d)</source> - <translation>Automatically create Tor hidden service (default: %d)</translation> - </message> - <message> - <source>Connect through SOCKS5 proxy</source> - <translation>Connect through SOCKS5 proxy</translation> - </message> - <message> <source>Error loading %s: You can't disable HD on an already existing HD wallet</source> <translation>Error loading %s: you can't disable HD on an already existing HD wallet.</translation> </message> @@ -3682,10 +3352,6 @@ <translation>Error upgrading chainstate database.</translation> </message> <message> - <source>Imports blocks from external blk000??.dat file on startup</source> - <translation>Imports blocks from external blk000??.dat file on startup</translation> - </message> - <message> <source>Information</source> <translation>Information</translation> </message> @@ -3706,42 +3372,14 @@ <translation>Invalid netmask specified in -whitelist: '%s'</translation> </message> <message> - <source>Keep at most <n> unconnectable transactions in memory (default: %u)</source> - <translation>Keep at most <n> unconnectable transactions in memory (default: %u)</translation> - </message> - <message> <source>Need to specify a port with -whitebind: '%s'</source> <translation>Need to specify a port with -whitebind: '%s'</translation> </message> <message> - <source>Node relay options:</source> - <translation>Node relay options:</translation> - </message> - <message> - <source>RPC server options:</source> - <translation>RPC server options:</translation> - </message> - <message> <source>Reducing -maxconnections from %d to %d, because of system limitations.</source> <translation>Reducing -maxconnections from %d to %d, because of system limitations.</translation> </message> <message> - <source>Rescan the block chain for missing wallet transactions on startup</source> - <translation>Rescan the block chain for missing wallet transactions on startup</translation> - </message> - <message> - <source>Send trace/debug info to console instead of debug.log file</source> - <translation>Send trace/debug info to console instead of debug.log file</translation> - </message> - <message> - <source>Show all debugging options (usage: --help -help-debug)</source> - <translation>Show all debugging options (usage: --help -help-debug)</translation> - </message> - <message> - <source>Shrink debug.log file on client startup (default: 1 when no -debug)</source> - <translation>Shrink debug.log file on client startup (default: 1 when no -debug)</translation> - </message> - <message> <source>Signing transaction failed</source> <translation>Signing transaction failed</translation> </message> @@ -3766,14 +3404,6 @@ <translation>This is experimental software.</translation> </message> <message> - <source>Tor control port password (default: empty)</source> - <translation>Tor control port password (default: empty)</translation> - </message> - <message> - <source>Tor control port to use if onion listening enabled (default: %s)</source> - <translation>Tor control port to use if onion listening enabled (default: %s)</translation> - </message> - <message> <source>Transaction amount too small</source> <translation>Transaction amount too small</translation> </message> @@ -3794,14 +3424,6 @@ <translation>Unable to generate initial keys.</translation> </message> <message> - <source>Upgrade wallet to latest format on startup</source> - <translation>Upgrade wallet to latest format on startup</translation> - </message> - <message> - <source>Username for JSON-RPC connections</source> - <translation>Username for JSON-RPC connections</translation> - </message> - <message> <source>Verifying wallet(s)...</source> <translation>Verifying wallet(s)...</translation> </message> @@ -3818,110 +3440,18 @@ <translation>Warning: unknown new rules activated (versionbit %i)</translation> </message> <message> - <source>Whether to operate in a blocks only mode (default: %u)</source> - <translation>Whether to operate in a blocks only mode (default: %u)</translation> - </message> - <message> - <source>You need to rebuild the database using -reindex to change -txindex</source> - <translation>You need to rebuild the database using -reindex to change -txindex</translation> - </message> - <message> <source>Zapping all transactions from wallet...</source> <translation>Zapping all transactions from wallet...</translation> </message> <message> - <source>ZeroMQ notification options:</source> - <translation>ZeroMQ notification options:</translation> - </message> - <message> - <source>Password for JSON-RPC connections</source> - <translation>Password for JSON-RPC connections</translation> - </message> - <message> - <source>Execute command when the best block changes (%s in cmd is replaced by block hash)</source> - <translation>Execute command when the best block changes (%s in cmd is replaced by block hash)</translation> - </message> - <message> - <source>Allow DNS lookups for -addnode, -seednode and -connect</source> - <translation>Allow DNS lookups for -addnode, -seednode and -connect</translation> - </message> - <message> - <source>(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</source> - <translation>(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</translation> - </message> - <message> <source>-maxtxfee is set very high! Fees this large could be paid on a single transaction.</source> <translation>-maxtxfee is set very high! Fees this large could be paid on a single transaction.</translation> </message> <message> - <source>Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses)</source> - <translation>Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses).</translation> - </message> - <message> - <source>Do not keep transactions in the mempool longer than <n> hours (default: %u)</source> - <translation>Do not keep transactions in the mempool longer than <n> hours (default: %u)</translation> - </message> - <message> - <source>Equivalent bytes per sigop in transactions for relay and mining (default: %u)</source> - <translation>Equivalent bytes per sigop in transactions for relay and mining (default: %u)</translation> - </message> - <message> <source>Error loading %s: You can't enable HD on an already existing non-HD wallet</source> <translation>Error loading %s: you can't enable HD on an already existing non-HD wallet.</translation> </message> <message> - <source>Error loading wallet %s. -wallet parameter must only specify a filename (not a path).</source> - <translation>Error loading wallet %s. The -wallet parameter must only specify a filename (not a path).</translation> - </message> - <message> - <source>Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)</source> - <translation>Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)</translation> - </message> - <message> - <source>Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d)</source> - <translation>Force relay of transactions from whitelisted peers, even if they violate local relay policy (default: %d).</translation> - </message> - <message> - <source>How thorough the block verification of -checkblocks is (0-4, default: %u)</source> - <translation>How thorough the block verification of -checkblocks is (0-4, default: %u)</translation> - </message> - <message> - <source>Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)</source> - <translation>Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)</translation> - </message> - <message> - <source>Number of seconds to keep misbehaving peers from reconnecting (default: %u)</source> - <translation>Number of seconds to keep misbehaving peers from reconnecting (default: %u)</translation> - </message> - <message> - <source>Output debugging information (default: %u, supplying <category> is optional)</source> - <translation>Output debugging information (default: %u, supplying <category> is optional)</translation> - </message> - <message> - <source>Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight</source> - <translation>Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight.</translation> - </message> - <message> - <source>Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d)</source> - <translation>Sets the serialisation of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d).</translation> - </message> - <message> - <source>Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>)</source> - <translation>Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>).</translation> - </message> - <message> - <source>Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s)</source> - <translation>Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s).</translation> - </message> - <message> - <source>Support filtering of blocks and transaction with bloom filters (default: %u)</source> - <translation>Support filtering of blocks and transaction with bloom filters (default: %u)</translation> - </message> - <message> - <source>The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target</source> - <translation>The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target.</translation> - </message> - <message> <source>This is the transaction fee you may pay when fee estimates are not available.</source> <translation>This is the transaction fee you may pay when fee estimates are not available.</translation> </message> @@ -3934,10 +3464,6 @@ <translation>Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.</translation> </message> <message> - <source>Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)</source> - <translation>Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)</translation> - </message> - <message> <source>Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported.</source> <translation>Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported.</translation> </message> @@ -3946,10 +3472,6 @@ <translation>Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay.</translation> </message> <message> - <source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</source> - <translation>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</translation> - </message> - <message> <source>Warning: Unknown block versions being mined! It's possible unknown rules are in effect</source> <translation>Warning: Unknown block versions being mined! It's possible unknown rules are in effect</translation> </message> @@ -3958,110 +3480,18 @@ <translation>Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup.</translation> </message> <message> - <source>Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.</source> - <translation>Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.</translation> - </message> - <message> <source>%s is set very high!</source> <translation>%s is set very high!</translation> </message> <message> - <source>(default: %s)</source> - <translation>(default: %s)</translation> - </message> - <message> - <source>Always query for peer addresses via DNS lookup (default: %u)</source> - <translation>Always query for peer addresses via DNS lookup (default: %u)</translation> - </message> - <message> - <source>Error loading wallet %s. -wallet filename must be a regular file.</source> - <translation>Error loading wallet %s. The -wallet filename must be a regular file.</translation> - </message> - <message> <source>Error loading wallet %s. Duplicate -wallet filename specified.</source> <translation>Error loading wallet %s. Duplicate -wallet filename specified.</translation> </message> <message> - <source>Error loading wallet %s. Invalid characters in -wallet filename.</source> - <translation>Error loading wallet %s. Invalid characters in -wallet filename.</translation> - </message> - <message> - <source>How many blocks to check at startup (default: %u, 0 = all)</source> - <translation>How many blocks to check at startup (default: %u, 0 = all)</translation> - </message> - <message> - <source>Include IP addresses in debug output (default: %u)</source> - <translation>Include IP addresses in debug output (default: %u)</translation> - </message> - <message> <source>Keypool ran out, please call keypoolrefill first</source> <translation>Keypool ran out, please call keypoolrefill first.</translation> </message> <message> - <source>Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)</source> - <translation>Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)</translation> - </message> - <message> - <source>Listen for connections on <port> (default: %u or testnet: %u)</source> - <translation>Listen for connections on <port> (default: %u or testnet: %u)</translation> - </message> - <message> - <source>Maintain at most <n> connections to peers (default: %u)</source> - <translation>Maintain at most <n> connections to peers (default: %u)</translation> - </message> - <message> - <source>Make the wallet broadcast transactions</source> - <translation>Make the wallet broadcast transactions</translation> - </message> - <message> - <source>Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)</source> - <translation>Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)</translation> - </message> - <message> - <source>Maximum per-connection send buffer, <n>*1000 bytes (default: %u)</source> - <translation>Maximum per-connection send buffer, <n>*1000 bytes (default: %u)</translation> - </message> - <message> - <source>Prepend debug output with timestamp (default: %u)</source> - <translation>Prepend debug output with timestamp (default: %u)</translation> - </message> - <message> - <source>Relay and mine data carrier transactions (default: %u)</source> - <translation>Relay and mine data carrier transactions (default: %u)</translation> - </message> - <message> - <source>Relay non-P2SH multisig (default: %u)</source> - <translation>Relay non-P2SH multisig (default: %u)</translation> - </message> - <message> - <source>Set key pool size to <n> (default: %u)</source> - <translation>Set key pool size to <n> (default: %u)</translation> - </message> - <message> - <source>Set maximum BIP141 block weight (default: %d)</source> - <translation>Set maximum BIP141 block weight (default: %d)</translation> - </message> - <message> - <source>Set the number of threads to service RPC calls (default: %d)</source> - <translation>Set the number of threads to service RPC calls (default: %d)</translation> - </message> - <message> - <source>Specify configuration file (default: %s)</source> - <translation>Specify configuration file (default: %s)</translation> - </message> - <message> - <source>Specify connection timeout in milliseconds (minimum: 1, default: %d)</source> - <translation>Specify connection timeout in milliseconds (minimum: 1, default: %d)</translation> - </message> - <message> - <source>Specify pid file (default: %s)</source> - <translation>Specify pid file (default: %s)</translation> - </message> - <message> - <source>Spend unconfirmed change when sending transactions (default: %u)</source> - <translation>Spend unconfirmed change when sending transactions (default: %u)</translation> - </message> - <message> <source>Starting network threads...</source> <translation>Starting network threads...</translation> </message> @@ -4078,10 +3508,6 @@ <translation>This is the transaction fee you will pay if you send a transaction.</translation> </message> <message> - <source>Threshold for disconnecting misbehaving peers (default: %u)</source> - <translation>Threshold for disconnecting misbehaving peers (default: %u)</translation> - </message> - <message> <source>Transaction amounts must not be negative</source> <translation>Transaction amounts must not be negative.</translation> </message> |